期刊文献+
共找到15,488篇文章
< 1 2 250 >
每页显示 20 50 100
Insights on advanced substrates for controllable fabrication of photoanodes toward efficient and stable photoelectrochemical water splitting 被引量:2
1
作者 Huilin Hou Gang Shao +2 位作者 Yang Wang Wai‐Yeung Wong Weiyou Yang 《Carbon Energy》 SCIE EI CAS CSCD 2024年第4期164-221,共58页
Conversion of solar energy into H_(2) by photoelectrochemical(PEC)water splitting is recognized as an ideal way to address the growing energy crisis and environmental issues.In a typical PEC cell,the construction of p... Conversion of solar energy into H_(2) by photoelectrochemical(PEC)water splitting is recognized as an ideal way to address the growing energy crisis and environmental issues.In a typical PEC cell,the construction of photoanodes is crucial to guarantee the high efficiency and stability of PEC reactions,which fundamentally rely on rationally designed semiconductors(as the active materials)and substrates(as the current collectors).In this review work,we start with a brief introduction of the roles of substrates in the PEC process.Then,we provide a systematic overview of representative strategies for the controlled fabrication of photoanodes on rationally designed substrates,including conductive glass,metal,sapphire,silicon,silicon carbide,and flexible substrates.Finally,some prospects concerning the challenges and research directions in this area are proposed. 展开更多
关键词 hydrogen PHOTOANODE PHOTOELECTROCHEMICAL substrates water splitting
下载PDF
Facile electrochemical surface-alloying and etching of Au wires to enable high-performance substrates for surface enhanced Raman scattering
2
作者 Yawen Zhan Guobin Zhang +8 位作者 Junda Shen Binbin Zhou Chenghao Zhao Junmei Guo Ming Wen Zhilong Tan Lirong Zheng Jian Lu Yang Yang Li 《Nano Materials Science》 EI CAS CSCD 2024年第3期305-311,共7页
Surface-enhanced Raman Spectroscopy(SERS)is a nondestructive technique for rapid detection of analytes even at the single-molecule level.However,highly sensitive and reliable SERS substrates are mostly fabricated with... Surface-enhanced Raman Spectroscopy(SERS)is a nondestructive technique for rapid detection of analytes even at the single-molecule level.However,highly sensitive and reliable SERS substrates are mostly fabricated with complex nanofabrication techniques,greatly restricting their practical applications.A convenient electrochemical method for transforming the surface of commercial gold wires/foils into silver-alloyed nanostructures is demonstrated in this report.Au substrates are treated with repetitive anodic and cathodic bias in an electrolyte of thiourea,in a one-pot one-step manner.X-rays absorption fine structure(XAFS)spectroscopy confirms that the AuAg alloy is induced at the surface.The unique AuAg alloyed surface nanostructures are particularly advantageous when served as SERS substrates,enabling a remarkably sensitive detection of Rhodamine B(a detection limit of 10^(-14)M,and uniform strong response throughout the substrates at 10^(-12)M). 展开更多
关键词 ELECTRODEPOSITION DEALLOYING Surface-alloyed Noble metals Surface enhanced Raman spectroscopy substrates
下载PDF
Exploring the mechanisms of calcium carbonate deposition on various substrates with implications for effective anti-scaling material selection
3
作者 Lu Gong Fei-Yi Wu +4 位作者 Ming-Fei Pan Jun Huang Hao Zhang Jing-Li Luo Hong-Bo Zeng 《Petroleum Science》 SCIE EI CAS CSCD 2024年第4期2870-2880,共11页
The unexpected scaling phenomena have resulted in significant damages to the oil and gas industries,leading to issues such as heat exchanger failures and pipeline clogging.It is of practical and fundamental importance... The unexpected scaling phenomena have resulted in significant damages to the oil and gas industries,leading to issues such as heat exchanger failures and pipeline clogging.It is of practical and fundamental importance to understand the scaling mechanisms and develop efficient anti-scaling strategies.However,the underlying surface interaction mechanisms of scalants(e.g.,calcite)with various substrates are still not fully understood.In this work,the colloidal probe atomic force microscopy(AFM)technique has been applied to directly quantify the surface forces between calcite particles and different metallic substrates,including carbon steel(CR1018),low alloy steel(4140),stainless steel(SS304)and tungsten carbide,under different water chemistries(i.e.,salinity and pH).Measured force profiles revealed that the attractive van der Waals(VDW)interaction contributed to the attachment of the calcium carbonate particles on substrate surfaces,while the repulsive electric double layer(EDL)interactions could inhibit the attachment behaviors.High salinity and acidic p H conditions of aqueous solutions could weaken the EDL repulsion and promote the attachment behavior.The adhesion of calcite particles with CR1018 and4140 substrates was much stronger than that with SS304 and tungsten carbide substrates.The bulk scaling tests in aqueous solutions from an industrial oil production process showed that much more severe scaling behaviors of calcite was detected on CR1018 and 4140 than those on SS304 and tungsten carbide,which agreed with surface force measurement results.Besides,high salinity and acidic p H can significantly enhance the scaling phenomena.This work provides fundamental insights into the scaling mechanisms of calcite at the nanoscale with practical implications for the selection of suitable antiscaling materials in petroleum industries. 展开更多
关键词 Scaling phenomenon Metallic substrates Surface forces Bulk scaling tests
下载PDF
Reshaping Li–Mg hybrid batteries:Epitaxial electrodeposition and spatial confinement on MgMOF substrates via the lattice‐matching strategy
4
作者 Yongqin Wang Fulin Cheng +2 位作者 Jiawen Ji Chenyang Cai Yu Fu 《Carbon Energy》 SCIE EI CAS CSCD 2024年第8期248-261,共14页
The emergence of Li–Mg hybrid batteries has been receiving attention,owing to their enhanced electrochemical kinetics and reduced overpotential.Nevertheless,the persistent challenge of uneven Mg electrodeposition rem... The emergence of Li–Mg hybrid batteries has been receiving attention,owing to their enhanced electrochemical kinetics and reduced overpotential.Nevertheless,the persistent challenge of uneven Mg electrodeposition remains a significant impediment to their practical integration.Herein,we developed an ingenious approach that centered around epitaxial electrocrystallization and meticulously controlled growth of magnesium crystals on a specialized MgMOF substrate.The chosen MgMOF substrate demonstrated a robust affinity for magnesium and showed minimal lattice misfit with Mg,establishing the crucial prerequisites for successful heteroepitaxial electrocrystallization.Moreover,the incorporation of periodic electric fields and successive nanochannels within the MgMOF structure created a spatially confined environment that considerably promoted uniform magnesium nucleation at the molecular scale.Taking inspiration from the“blockchain”concept prevalent in the realm of big data,we seamlessly integrated a conductive polypyrrole framework,acting as a connecting“chain,”to interlink the“blocks”comprising the MgMOF cavities.This innovative design significantly amplified charge‐transfer efficiency,thereby increasing overall electrochemical kinetics.The resulting architecture(MgMOF@PPy@CC)served as an exceptional host for heteroepitaxial Mg electrodeposition,showcasing remarkable electrostripping/plating kinetics and excellent cycling performance.Surprisingly,a symmetrical cell incorporating the MgMOF@PPy@CC electrode demonstrated impressive stability even under ultrahigh current density conditions(10mAcm^(–2)),maintaining operation for an extended 1200 h,surpassing previously reported benchmarks.Significantly,on coupling the MgMOF@PPy@CC anode with a Mo_(6)S_(8) cathode,the assembled battery showed an extended lifespan of 10,000 cycles at 70 C,with an outstanding capacity retention of 96.23%.This study provides a fresh perspective on the rational design of epitaxial electrocrystallization driven by metal–organic framework(MOF)substrates,paving the way toward the advancement of cuttingedge batteries. 展开更多
关键词 epitaxial electrodeposition lattice‐matching strategy Li-Mg hybrid batteries MOF substrate spatial confinement
下载PDF
Impact of Different Cultivation Substrates on the Growth of Cymbidium goeringii
5
作者 Xuejiao HE Zhicheng YU Shaohua WU 《Plant Diseases and Pests》 2024年第5期40-42,共3页
[Objectives]The paper was to explore the impact of different cultivation substrates on the growth of Cymbidium goeringii.[Methods]The impact of 13 distinct cultivation substrates on the growth of C.goeringii was exami... [Objectives]The paper was to explore the impact of different cultivation substrates on the growth of Cymbidium goeringii.[Methods]The impact of 13 distinct cultivation substrates on the growth of C.goeringii was examined using C.goeringii as the test material.[Results]The combination of burning red clay particles(15%),No.4 pine bark(15%),No.3 pine bark(60%),and perlite(10%),as well as the mixture of burning red clay particles(20%),No.4 pine bark(15%),No.3 pine bark(55%),and perlite(10%),yielded superior results.These formulations resulted in an increased number of new roots in C.goeringii,a reduction in the incidence of decayed roots,and enhancements in the number of tillers,new leaves,and flowers.[Conclusions]The selection of substrates may serve as a valuable reference for the cultivation of C.goeringii. 展开更多
关键词 Cymbidium goeringii substratE GROWTH
下载PDF
Direct Synthesis of Layer-Tunable and Transfer-Free Graphene on Device-Compatible Substrates Using Ion Implantation Toward Versatile Applications
6
作者 Bingkun Wang Jun Jiang +7 位作者 Kevin Baldwin Huijuan Wu Li Zheng Mingming Gong Xuehai Ju Gang Wang Caichao Ye Yongqiang Wang 《Energy & Environmental Materials》 SCIE EI CAS CSCD 2024年第5期408-418,共11页
Direct synthesis of layer-tunable and transfer-free graphene on technologically important substrates is highly valued for various electronics and device applications.State of the art in the field is currently a two-st... Direct synthesis of layer-tunable and transfer-free graphene on technologically important substrates is highly valued for various electronics and device applications.State of the art in the field is currently a two-step process:a high-quality graphene layer synthesis on metal substrate through chemical vapor deposition(CVD)followed by delicate layer transfer onto device-relevant substrates.Here,we report a novel synthesis approach combining ion implantation for a precise graphene layer control and dual-metal smart Janus substrate for a diffusion-limiting graphene formation to directly synthesize large area,high quality,and layer-tunable graphene films on arbitrary substrates without the post-synthesis layer transfer process.Carbon(C)ion implantation was performed on Cu-Ni film deposited on a variety of device-relevant substrates.A well-controlled number of layers of graphene,primarily monolayer and bilayer,is precisely controlled by the equivalent fluence of the implanted C-atoms(1 monolayer~4×10^(15)C-atoms/cm^(2)).Upon thermal annealing to promote Cu-Ni alloying,the pre-implanted C-atoms in the Ni layer are pushed toward the Ni/substrate interface by the top Cu layer due to the poor C-solubility in Cu.As a result,the expelled C-atoms precipitate into a graphene structure at the interface facilitated by the Cu-like alloy catalysis.After removing the alloyed Cu-like surface layer,the layer-tunable graphene on the desired substrate is directly realized.The layer-selectivity,high quality,and uniformity of the graphene films are not only confirmed with detailed characterizations using a suite of surface analysis techniques but more importantly are successfully demonstrated by the excellent properties and performance of several devices directly fabricated from these graphene films.Molecular dynamics(MD)simulations using the reactive force field(ReaxFF)were performed to elucidate the graphene formation mechanisms in this novel synthesis approach.With the wide use of ion implantation technology in the microelectronics industry,this novel graphene synthesis approach with precise layer-tunability and transfer-free processing has the promise to advance efficient graphene-device manufacturing and expedite their versatile applications in many fields. 展开更多
关键词 device applications dual-metal smart Janus substrate growth mechanism Ion implantation layer-tunable and transfer-free graphene
下载PDF
Localized-states quantum confinement induced by roughness in CdMnTe/CdTe heterostructures grown on Si(111) substrates
7
作者 Leonarde N.Rodrigues Wesley F.Inoch +3 位作者 Marcos L.F.Gomes Odilon D.D.Couto Jr. Bráulio S.Archanjo Sukarno O.Ferreira 《Journal of Semiconductors》 EI CAS CSCD 2024年第9期28-35,共8页
This work shows that despite a lattice mismatch of almost 20%, CdMnTe/CdTe/CdMnTe heterostructures grown directly on Si(111) have surprisingly good optical emission properties. The investigated structures were grown b... This work shows that despite a lattice mismatch of almost 20%, CdMnTe/CdTe/CdMnTe heterostructures grown directly on Si(111) have surprisingly good optical emission properties. The investigated structures were grown by molecular beam epitaxy and characterized by scanning transmission electron microscopy, macro-and micro-photoluminescence. Low temperature macro-photoluminescence experiments indicate three emission bands which depend on the CdTe layer thickness and have different confinement characteristics. Temperature measurements reveal that the lower energy emission band (at 1.48 eV)is associated to defects and bound exciton states, while the main emission at 1.61 eV has a weak 2D character and the higher energy one at 1.71 eV has a well-defined (zero-dimensional, 0D) 0D nature. Micro-photoluminescence measurements show the existence of sharp and strongly circularly polarized (up to 40%) emission lines which can be related to the presence of Mn in the heterostructure. This result opens the possibility of producing photon sources with the typical spin control of the diluted magnetic semiconductors using the low-cost silicon technology. 展开更多
关键词 CdMnTe/CdTe/CdMnTe heterostructure CdTe/CdMnTe quantum emitters quantum dot-like emission silicon(111)substrate
下载PDF
Active tuning of anisotropic phonon polaritons in natural van der Waals crystals with negative permittivity substrates and its application in energy transport
8
作者 Shuo Chen Xiaohu Wu Ceji Fu 《Opto-Electronic Science》 2024年第6期1-19,共19页
Phonon polaritons(PhPs)exhibit directional in-plane propagation and ultralow losses in van der Waals(vdW)crystals,offering new possibilities for controlling the flow of light at the nanoscale.However,these PhPs,includ... Phonon polaritons(PhPs)exhibit directional in-plane propagation and ultralow losses in van der Waals(vdW)crystals,offering new possibilities for controlling the flow of light at the nanoscale.However,these PhPs,including their directional propagation,are inherently determined by the anisotropic crystal structure of the host materials.Although in-plane anisotropic PhPs can be manipulated by twisting engineering,such as twisting individual vdW slabs,dynamically adjusting their propagation presents a significant challenge.The limited application of the twisted bilayer structure in bare films further restricts its usage.In this study,we present a technique in which anisotropic PhPs supported by bare biaxial vdW slabs can be actively tuned by modifying their local dielectric environment.Excitingly,we predict that the iso-frequency contour of PhPs can be reoriented to enable propagation along forbidden directions when the crystal is placed on a substrate with a moderate negative permittivity.Besides,we systematically investigate the impact of polaritonic coupling on near-field radiative heat transfer(NFRHT)between heterostructures integrated with different substrates that have negative permittivity.Our main findings reveal that through the analysis of dispersion contour and photon transmission coefficient,the excitation and reorientation of the fundamental mode facilitate increased photon tunneling,thereby enhancing heat transfer between heterostructures.Conversely,the annihilation of the fundamental mode hinders heat transfer.Furthermore,we find the enhancement or suppression of radiative energy transport depends on the relative magnitude of the slab thickness and the vacuum gap width.Finally,the effect of negative permittivity substrates on NFRHT along the[001]crystalline direction ofα-MoO3 is considered.The spectral band where the excited fundamental mode resulting from the negative permittivity substrates is shifted to the first Reststrahlen Band(RB 1)ofα-MoO_(3) and is widened,resulting in more significant enhancement of heat flux from RB 1.We anticipate our results will motivate new direction for dynamical tunability of the PhPs in photonic devices. 展开更多
关键词 anisotropic phonon polaritons forbidden direction substrate with a negative permittivity near-field energy transport
下载PDF
Biochemical, functional and antioxidant potential of higher fungi cultivated on agro-industrial residues. Part Ⅱ: Cultures on mixtures of spent mushroom substrates and mushroom cropping by-products
9
作者 Marianna Dedousi Eirini Maria Melanouri +2 位作者 Ilias Diamantis Seraphim Papanikolaou Panagiota Diamantopoulou 《Resources Chemicals and Materials》 2024年第3期175-187,共13页
Novel substrates consisted of different fresh agro-industrial residues,their corresponding and commercial spent mushroom substrates(i.e.SMS deriving from laboratory-scale experiments and SMS deriving from industrial-s... Novel substrates consisted of different fresh agro-industrial residues,their corresponding and commercial spent mushroom substrates(i.e.SMS deriving from laboratory-scale experiments and SMS deriving from industrial-scale experiments by Green Zin S.A.-SMS GZ)and Pleurotus waste(PW;stipes/mishappen mushrooms)were used in blends for a new cultivation cycle of Pleurotus ostreatus and P.eryngii mushrooms in bags.Their impact on the biochemical properties(intra-cellular polysaccharides-IPSs,protein,lipid,total phenolic compounds-TPCs,individual carbohydrates composition of the IPSs)in the first-and second-flush whole mushrooms,pilei and stipes,as well as the fatty acids composition,the antioxidant activity(in the first-flush mushroom parts)and glucan content of stipes were examined.Both species produced satisfactory IPSs quantities in all substrates(28.69-46.38%,w/w)and significant protein amounts(18.37-26.80%,w/w).The further SMS addition(80%,w/w instead of 40%,w/w)in the cultivation substrates affected positively the mushroom IPSs values,whereas the highest protein content was detected in mushroom’s parts cultivated on substrates consisted of fresh agro-industrial residues.Mushroom’s lipid content was affected differently by the various substrate combinations,with SMS presence resulting in mushrooms with a lower fat content than those produced in substrates with PW addition.Fresh substrates with PW and those with coffee residue were the most favorable for TPCs production.Regarding production flushes,the nutritional value of mushrooms was comparable between them,only a slight increase in TPCs of second-flush carposomes was detected.Glucose was the predominant monosaccharide of the produced IPSs,combined with a significant production of total and β-glucans.SMSs and PW addition had a positive impact on antioxidant activity,too.A higher quantity of lipids,TPCs and significant antioxidant activity were detected in all Pleurotus pilei than stipes,whereas the latter were richer in IPSs.Both pilei and stipes had a significant protein amount.Hence,the data obtained by this study support the positive effect of different types of SMS and mushroom waste on P.ostreatus and P.eryngii nutritional value. 展开更多
关键词 PLEUROTUS Agro-industrial residues Spent mushroom substrate Stipes Pilei
下载PDF
A Pore-Forming Strategy Toward Porous Carbon-Based Substrates for High Performance Flexible Lithium Metal Full Batteries 被引量:1
10
作者 Yanfei Li Shuyang Ye +7 位作者 Jian Lin Yihan Song Xinglong Wu Jingping Zhang Changlu Shao Zhongmin Su Haizhu Sun Dwight S.Seferos 《Energy & Environmental Materials》 SCIE EI CAS CSCD 2023年第3期117-125,共9页
Self-standing carbon-based substrates with satisfied structural stability and property adjustability have promising applications in flexible lithium(Li)metal batteries(FLMBs).Current strategies for modifying carbon ma... Self-standing carbon-based substrates with satisfied structural stability and property adjustability have promising applications in flexible lithium(Li)metal batteries(FLMBs).Current strategies for modifying carbon materials are normally carried out on powder carbon,and very few of them are suitable for self-standing carbon substrates.Herein,a pore-forming strategy based on the redox chemistry of metallic oxide nanodots is developed to prepare two porous carbon substrates for anode and cathode.Starting with cotton cloth,the resulting hollow carbon fibers substrate with nanopores effectively prevents from Li dendrites formation and large volume change in lithium metal anode(LMA).Simulations indicate that the porous structure leads to homogeneous ion flux,Li-ion concentration,and electric field during Li deposition.Li symmetrical cell based on this substrate remains stable for 8300 h with an ultralow voltage hysteresis of 9 mV.Via a similar route,porous carbon cloth substrate is obtained for subsequently seeding V_(2)O_(5)nanowires to prepare the cathode.The assembled FLMBs pouch cell delivers a capacity of 8.2 mAh with a high capacity retention of~100%even under dramatic deformation.The demonstrated strategy has far-reaching potential in preparing free-standing porous carbon-based materials for flexible energy storage devices. 展开更多
关键词 dual-function carbon substrates flexible lithium metal full batteries lithium metal anode porous structure V_(2)O_(5)cathode
下载PDF
电沉积Ni-W及Ni-W-SiC镀层的组织与性能 被引量:1
11
作者 赵显蒙 李长青 +2 位作者 鞠辉 张庆霞 孙淑伟 《电镀与精饰》 CAS 北大核心 2024年第4期18-23,共6页
采用电沉积法在钢基体表面制备了Ni-W和Ni-W-SiC镀层,并对镀层的成分及组织结构、维氏硬度、与基体的结合力、耐磨性和耐蚀性进行了测试与分析。结果表明,镀层在镀态为非晶结构,在500℃热处理2 h会发生明显晶化,Ni-W和Ni-W-SiC镀层的维... 采用电沉积法在钢基体表面制备了Ni-W和Ni-W-SiC镀层,并对镀层的成分及组织结构、维氏硬度、与基体的结合力、耐磨性和耐蚀性进行了测试与分析。结果表明,镀层在镀态为非晶结构,在500℃热处理2 h会发生明显晶化,Ni-W和Ni-W-SiC镀层的维氏硬度分别高达1036 HV和1136 HV,硬度和耐磨性均明显高于Cr镀层。经过中性盐雾试验,镀层表现出良好的耐蚀性,保护评级可达到10级。 展开更多
关键词 ni-w镀层 ni-w-SiC镀层 维氏硬度 耐磨性 耐蚀性
下载PDF
用于金刚石摩擦化学抛光的Ni-W合金盘制备
12
作者 牛昊 金洙吉 +1 位作者 沈煜 杨辉鹏 《金刚石与磨料磨具工程》 CAS 北大核心 2024年第1期39-49,共11页
为探究镀液成分、工艺条件等因素对Ni-W合金镀层的影响,制备出低内应力、高硬度的Ni-W合金盘,用于金刚石的摩擦化学抛光。采用单一性实验分别探究络合剂浓度、溶液pH、糖精钠浓度对镀层内应力、钨含量、硬度以及沉积速率的影响,并探究... 为探究镀液成分、工艺条件等因素对Ni-W合金镀层的影响,制备出低内应力、高硬度的Ni-W合金盘,用于金刚石的摩擦化学抛光。采用单一性实验分别探究络合剂浓度、溶液pH、糖精钠浓度对镀层内应力、钨含量、硬度以及沉积速率的影响,并探究不同添加剂对镀层表面整平的效果。最终选用水杨醛为整平剂,并采用反向脉冲电流降低了镀层表面粗糙度,制备出硬度达HV 713,镀层厚度约为0.66 mm的Ni-W合金盘。使用合金盘对金刚石进行摩擦化学抛光,并探究合适的抛光工艺参数。在合金盘转速为8000 r/min,压力为40 N时,金刚石的抛光效果较好,其材料去除率为5.56μm/min,磨削比达0.394,金刚石表面粗糙度Sa为3.7 nm。使用传统铸铁盘对金刚石进行摩擦化学抛光,通过对比磨损参数发现,Ni-W合金盘能够达到更好的抛光效果。 展开更多
关键词 金刚石 ni-w合金 镀层内应力 摩擦化学抛光
下载PDF
Performance of Two Food Substrates in the Mass Rearing of Bactrocera dorsalis Hendel (Diptera: Tephritidae)
13
作者 Karim Nébié Ilboudo Zakaria +2 位作者 Pagabeleguem Soumaila Zaoua Hamoumapi Delphine Dabiré Rémy 《Advances in Entomology》 2023年第3期188-203,共16页
The fruit fly Bactrocera dorsalis Hendel is a major constraint to mango production in Burkina Faso. The objective of this study was to evaluate the performance of two types of food substrates in optimizing the mass re... The fruit fly Bactrocera dorsalis Hendel is a major constraint to mango production in Burkina Faso. The objective of this study was to evaluate the performance of two types of food substrates in optimizing the mass rearing of B. dorsalis larvae. For this purpose, 200 eggs of B. dorsalis were divided into four batches of 50 eggs and incubated in Petri dishes containing the different food substrates (Diet 1 and Diet 2). This method was used to evaluate the rate and duration of egg hatching, as well as the development time of the different larval stages. In addition, 1200 pupae divided into four batches of 300 pupae, contained in PVC tubes, were placed inside the rearing cages to monitor the emergence of B. dorsalis. Ten pairs of B. dorsalis were placed in rearing cages and fed with Enzymatic Yeast Hydrolysate and sugar to evaluate the fecundity of female flies and the survival of both sexes. The developmental cycle length in Diet 1 and Diet 2 was 23.03 days and 23.24 days, respectively. Fecundity duration ranged from 57.75 ± 2.29 to 109.81 ± 3.81 days for females from Diet 1 and Diet 2, respectively. The pupal hatching rate varied significantly (P B. dorsalis, but the spawning index was 4 times higher with Diet 1. Most of the components of Diet 1 are available on the local market and are cheaper. Thus, we recommend the use of Diet 1 for B. dorsalis larvae mass rearing. 展开更多
关键词 Fruit Fly Diachasmimorpha longicaudata BIOLOGY Food substrates Mass Rearing
下载PDF
Evaluation of Different Substrates Compositions for Acclimatization of Tissue Culture Taro Plantlets in a Propagator
14
作者 Evelyn Bi Manju Victorine Yaya Fornkwav +1 位作者 Irene Bonsiysi Bam Raissa Akwa Tima 《Agricultural Sciences》 2023年第7期925-938,共14页
Taro is cultivated in most Regions of Cameroon and it is affected by taro leaf blight disease since 2010 which has decreased its production. Lack of disease-free planting materials has been a main problem to farmers. ... Taro is cultivated in most Regions of Cameroon and it is affected by taro leaf blight disease since 2010 which has decreased its production. Lack of disease-free planting materials has been a main problem to farmers. This study was carried out at International Institute of Tropical Agriculture (IITA) Yaounde and Institute of Agricultural Research for Development (IRAD) Bambui to assess different substrates for acclimatization of tissue culture taro plantlets in apropagator. No information is available on acclimatization of Cameroonian taro plantlets in different substrates. Taro plantlets from tissue culture were acclimatised in a propagator for six weeks under different substrates, the first substrate consisted of sterile three parts of soil and one part of river sand mixed together (3:1), the second substrate consisted of sterile two parts of soil and two parts of river sand mixed together (2:2), the third substrate consisted of sterile two parts of soil, one part of rice husk and one part of river sand mixed together (2:1:1) and the fourth substrate consisted of sterile one part of soil and three parts of river sand mixed together (1:3). After acclimatisation of the different taroplantlets (Dark green petiole with small leaves (L1), Red petiole with small leaves (L2), Light green petiole with large leaves (L3) and Light green petiole with small leaves (L4) in these four substrates, it was observed that the best growth rate of plant was recorded on substrate sand + soil (1:3). The other substrates showed moderate growth of plants. Substrate sand + soil (1:3) can be recommended for acclimatization of Cameroonian taro plantlets. 展开更多
关键词 Taro Tissue Culture Plantlets substrates ACCLIMATIZATION PROPAGATOR
下载PDF
Structure of Cu-Phthalocyanine Vacuum Deposited on Inclined Glass Substrates
15
作者 Masato Ohmukai Yasutaka Kato 《World Journal of Engineering and Technology》 2023年第4期770-774,共5页
Cu-phthalocyanine is widely studied as a hole-transport layer in organic electronic devices. Since Cu-phthalocyanine is a molecular solid, the crystal structure depends on a circumstance to a great extent. Vacuum depo... Cu-phthalocyanine is widely studied as a hole-transport layer in organic electronic devices. Since Cu-phthalocyanine is a molecular solid, the crystal structure depends on a circumstance to a great extent. Vacuum deposited layers were known to consist of two consecutive layers. In this article, Cu-phthalocyanine was deposited on the glass substrate inclined at several angles. The thickness of the first layer was found to be dependent on the substrate angle. 展开更多
关键词 Cu-Phthalocyanine Vacuum Deposition Crystal Structure Inclined substrate
下载PDF
High-temperature annealing of(201)β-Ga_(2)O_(3) substrates for reducing structural defects after diamond sawing
16
作者 Pavel Butenko Michael Boiko +5 位作者 Mikhail Sharkov Aleksei Almaev Aleksnder Kitsay Vladimir Krymov Anton Zarichny Vladimir Nikolaev 《Journal of Semiconductors》 EI CAS CSCD 2023年第12期125-132,共8页
A commercial epi-ready(201)β-Ga_(2)O_(3) wafer was investigated upon diamond sawing into pieces measuring 2.5×3 mm^(2).The defect structure and crystallinity in the cut samples has been studied by X-ray diffract... A commercial epi-ready(201)β-Ga_(2)O_(3) wafer was investigated upon diamond sawing into pieces measuring 2.5×3 mm^(2).The defect structure and crystallinity in the cut samples has been studied by X-ray diffraction and a selective wet etching technique.The density of defects was estimated from the average value of etch pits calculated,including near-edge regions,and was obtained close to 109 cm^(-2).Blocks with lattice orientation deviated by angles of 1-3 arcmin,as well as non-stoichiometric fractions with a relative strain about(1.0-1.5)×10^(-4)in the[201]direction,were found.Crystal perfection was shown to decrease significantly towards the cutting lines of the samples.To reduce the number of structural defects and increase the crystal perfection of the samples via increasing defect motion mobility,the thermal annealing was employed.Polygonization and formation of a mosaic structure coupled with dislocation wall appearance upon 3 h of annealing at 1100℃ was observed.The fractions characterized by non-stoichiometry phases and the block deviation disappeared.The annealing for 11 h improved the homogeneity and perfection in the crystals.The average density of the etch pits dropped down significantly to 8×10^(6) cm^(-2). 展开更多
关键词 gallium oxide epi-ready substrate etch pits crystal defect mosaic structure crystal perfection
下载PDF
11.2 W/mm power density AlGaN/GaN high electron-mobility transistors on a GaN substrate 被引量:1
17
作者 Yansheng Hu Yuangang Wang +11 位作者 Wei Wang Yuanjie Lv Hongyu Guo Zhirong Zhang Hao Yu Xubo Song Xingye zhou Tingting Han Shaobo Dun Hongyu Liu Aimin Bu Zhihong Feng 《Journal of Semiconductors》 EI CAS CSCD 2024年第1期38-41,共4页
In this letter,high power density AlGaN/GaN high electron-mobility transistors(HEMTs)on a freestanding GaN substrate are reported.An asymmetricΓ-shaped 500-nm gate with a field plate of 650 nm is introduced to improv... In this letter,high power density AlGaN/GaN high electron-mobility transistors(HEMTs)on a freestanding GaN substrate are reported.An asymmetricΓ-shaped 500-nm gate with a field plate of 650 nm is introduced to improve microwave power performance.The breakdown voltage(BV)is increased to more than 200 V for the fabricated device with gate-to-source and gate-to-drain distances of 1.08 and 2.92μm.A record continuous-wave power density of 11.2 W/mm@10 GHz is realized with a drain bias of 70 V.The maximum oscillation frequency(f_(max))and unity current gain cut-off frequency(f_(t))of the AlGaN/GaN HEMTs exceed 30 and 20 GHz,respectively.The results demonstrate the potential of AlGaN/GaN HEMTs on freestanding GaN substrates for microwave power applications. 展开更多
关键词 freestanding GaN substrates AlGaN/GaN HEMTs continuous-wave power density breakdown voltage Γ-shaped gate
下载PDF
Evolution of microstructure, stress and dislocation of AlN thick film on nanopatterned sapphire substrates by hydride vapor phase epitaxy
18
作者 王闯 高晓冬 +7 位作者 李迪迪 陈晶晶 陈家凡 董晓鸣 王晓丹 黄俊 曾雄辉 徐科 《Chinese Physics B》 SCIE EI CAS CSCD 2023年第2期399-404,共6页
A crack-free AlN film with 4.5 μm thickness was grown on a 2-inch hole-type nano-patterned sapphire substrates(NPSSs) by hydride vapor phase epitaxy(HVPE). The coalescence, stress evolution, and dislocation annihilat... A crack-free AlN film with 4.5 μm thickness was grown on a 2-inch hole-type nano-patterned sapphire substrates(NPSSs) by hydride vapor phase epitaxy(HVPE). The coalescence, stress evolution, and dislocation annihilation mechanisms in the AlN layer have been investigated. The large voids located on the pattern region were caused by the undesirable parasitic crystallites grown on the sidewalls of the nano-pattern in the early growth stage. The coalescence of the c-plane AlN was hindered by these three-fold crystallites and the special triangle void appeared. The cross-sectional Raman line scan was used to characterize the change of stress with film thickness, which corresponds to the characteristics of different growth stages of AlN. Threading dislocations(TDs) mainly originate from the boundary between misaligned crystallites and the c-plane AlN and the coalescence of two adjacent c-plane AlN crystals, rather than the interface between sapphire and AlN. 展开更多
关键词 hydride vapor phase epitaxy(HVPE) ALN threading dislocations nano-patterned sapphire substrate
下载PDF
Effects of Scarification and Substrates on Seed Germination Quality for Domestication of Stereospermum kunthianum(Bignoniaceae)
19
作者 Beunon Tchimbi Aziber Hamza Ousman +2 位作者 Sabre Idriss Absakine Anjah Gâce Mendi BéréNangndi 《Journal of Environmental Science and Engineering(B)》 2023年第6期280-288,共9页
The demand for medicinal plants at the origin of phyto-drugs,like all ethnobotanical plants,threatens their existence today.The aim of this work was to determine suitable methods for optimizing the possibilities of re... The demand for medicinal plants at the origin of phyto-drugs,like all ethnobotanical plants,threatens their existence today.The aim of this work was to determine suitable methods for optimizing the possibilities of regenerating Stereospermum kunthianum.To achieve this objective,3 levels of mechanical scarification(light scarification,medium scarification and deep scarification)were applied to the seeds of this species using a rough instrument,and 5 days after germination,the seedlings were transplanted into 5 types of substrate to study their effects on seedling growth.The length of the seedlings was measured using a graduated ruler.The results obtained showed that the best latency time was 2 days for average seed scarifications.The highest germination half-time was 4.00±0.06 days observed for average seed scarification,the highest germination speed was 22.50±1.00 and the highest germination rate was 100.00%±0.00%for average scarification.The homogeneous substrate mixes black earth/woodsilk and Fine sand/woodsilk were more effective for seedling growth(1.9 cm/day in the juvenile state)and development.Medium seed scarification is the most effective method for regenerating Stereospermum kunthianum,and the black earth/wood shavings substrate mix is the best for its cultivation. 展开更多
关键词 SCARIFICATION substrate GERMINATION DOMESTICATION Stereospermum kunthianum
下载PDF
钨含量对Ni-W合金镀层摩擦学性能的影响
20
作者 高强 白霄 +2 位作者 牟毅 张德建 万勇 《润滑与密封》 CAS CSCD 北大核心 2024年第9期135-141,190,共8页
为探究W含量对Ni-W合金镀层摩擦学性能的影响,采用脉冲电沉积技术在45钢基体表面制备Ni-W合金镀层,探究钨含量对Ni-W合金镀层微观结构、力学及摩擦学性能的影响。研究结果显示:制备的Ni-W合金镀层晶粒尺寸均匀致密,镀层与基体之间结合紧... 为探究W含量对Ni-W合金镀层摩擦学性能的影响,采用脉冲电沉积技术在45钢基体表面制备Ni-W合金镀层,探究钨含量对Ni-W合金镀层微观结构、力学及摩擦学性能的影响。研究结果显示:制备的Ni-W合金镀层晶粒尺寸均匀致密,镀层与基体之间结合紧密;与基体材料相比,Ni-W合金镀层具有更高的硬度,且硬度随着钨含量增加而增加;45钢基体磨损行为主要表现为磨粒磨损,Ni-W镀层主要表现为黏着磨损和磨粒磨损,且随着W含量的增加,镀层的耐磨性能逐渐提高;在干摩擦和PAO6油润滑条件下,Ni-W合金镀层能够显著降低基体的磨损,尤其在油润滑条件下,镀层表面几乎没有出现磨损。因此,脉冲电沉积Ni-W合金镀层具备优异的摩擦学性能,通过调节镀层中的钨含量可有效改善其力学性能和摩擦学性能。 展开更多
关键词 脉冲电沉积 ni-w合金镀层 力学性能 摩擦学性能
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部