Research on the Nickel Metal Hydride Battery Quick Charger

In order to design a new type of quick charger for NiMH battery, the new method of pulse charge discharge was adopted after studying the charge process and analyzing the NiMH battery charge characteristics. The charge and discharge experiments were carried out to check feasibility and superiority of the new method. The results indicated that with the discharge pulse added the charger can charge quickly, the battery voltage and temperature can be properly controlled to prevent the battery being destroyed, and the capacity of the NiMH battery is greater than that of the battery without the discharge pulse added.

Hydrometallurgy two stage process for preparation of (Nd,La,Ce)_(2)O_(3) from end-of-life NiMH batteries

The present work aims to investigate the recovery of light rare earth elements(LREEs) oxides from end-oflife NiMH batteries using a hydro metallurgical process followed by effective precipitation.The operational leaching parameters such as phosphoric acid concentration,temperature,and the solid-liquid ratio were first optimized by Box-Behnken design.The results reveal that under optimum conditions([H_(3)PO_(4)]=2 mol/L,T=80℃,and S/L=1:10 g/mL) the leaching efficiencies of Ni,Co reach 98.1% and99.3%.While La,Ce,and Nd elements remain in the leaching residue as(La,Ce,Nd)PO_(4) with yields of 98.2%,98.6%,and 99.6% for La,Ce,and Nd,respectively.Afterward,the(La,Ce,Nd)PO_(4) is leached with HCl acid,then the rare earth oxalate was precipitated using oxalic acid at a pH of 1.8 and then the product was calcined at 800℃ for 2 h in order to synthesize the(Nd,La,Ce)_(2)O_(3).The analysis using scanning electron microscopy(SEM) coupled with energy dispersive X-ray spectroscopy(EDX) confirms the homogeneity of(Nd,La,Ce)_(2)O_(3) particles that have two morphologies,i.e.,flower and sticks with a particle size between 3and 6 μm.The unit cell parameters of(Nd,La,Ce)_(2)O_(3) were calculated after Rietveld refinement of the XRD patterns,in the space group of Fm-3m are a=b=c=0.57921 nm and the volume equal to 0.194322 nm^(3).

High-performance nickel metal hydride battery anode with enhanced durability and excellent low-temperature discharge capability

Current AB_(5)-type hydrogen storage alloys employed in nickel-metal hydride(NiMH)batteries exhibit exceptional low-temperature discharge performance but suffer from limited cycle life and insufficient high-temperature stability.To overcome these challenges,we introduce a hydrothermal synthesized LaF_(3)coating layer on the surface of the AB_(5)anode material.This LaF_(3)coating layer adds a protective barrier for the active material,significantly improving the battery's cycle life and high-temperature stability.Our findings indicate that(1)the LaF_(3)coated anode demonstrates an extended cycle life with increased specific capacity and a capacity retention of 88%after 40 cycles of abusive overcharging and rapid discharging at room temperature.(2)The synthesized anode exhibits a 97%recovery of its specific capacity of 292.7 mAh/g following 144 h of high-temperature storage.(3)The low-temperature discharge capacity of the synthesized anode remains on par with the pristine AB_(5)alloy at 230.4 mAh/g in a-40℃environment.This research presents a significant advancement in hydrogen storage alloy coatings and offers valuable insights for designing electrodes in NiMH batteries.