Solid-state cooling technologies have been considered as potential alternatives for vapor compression cooling systems.The search for refrigeration materials displaying a unique combination of pronounced caloric effect...Solid-state cooling technologies have been considered as potential alternatives for vapor compression cooling systems.The search for refrigeration materials displaying a unique combination of pronounced caloric effect,low hysteresis,and high reversibility on phase transformation was very active in recent years.Here,we achieved increase in the elastocaloric reversibility and decrease in the friction dissipation of martensite transformations in the superelastic nano-grained NiTi alloys obtained by cold rolling and annealing treatment,with very low stress hysteresis(6.3 MPa)under a large applied strain(5%).Large adiabatic temperature changes(△T_(max)=16.3 K atε=5%)and moderate COP_(mater)values(maximum COP_(mater)=11.8 atε=2%)were achieved.The present nano-grained NiTi alloys exhibited great potential for applications as a highly efficient elastocaloric material.展开更多
激光粉末床熔融(laser powder bed fusion,LPBF)成形NiTi合金由于Ni元素的蒸发导致成分偏离粉末设计成分,而NiTi合金的形状记忆效应、超弹性等性能受Ni含量影响极大。因此有必要对不同Ni含量NiTi合金的LPBF成形性、显微组织以及力学性...激光粉末床熔融(laser powder bed fusion,LPBF)成形NiTi合金由于Ni元素的蒸发导致成分偏离粉末设计成分,而NiTi合金的形状记忆效应、超弹性等性能受Ni含量影响极大。因此有必要对不同Ni含量NiTi合金的LPBF成形性、显微组织以及力学性能开展研究。采用真空电极感应熔炼气雾化技术制备了Ni_(50.8)Ti、Ni_(51.0)Ti以及Ni_(51.5)Ti(原子分数,%)3种预合金粉末,研究其在不同工艺参数下的冶金缺陷、显微组织及力学性能的演化规律。结果表明,高Ni含量NiTi合金在LPBF成形过程中容易产生垂直于建造方向的裂纹,成形性较低Ni含量NiTi合金差。Ni_(51.5)Ti合金室温下的临界应力可达476 MPa,但断裂伸长率仅为2%;Ni_(50.8)Ti合金临界应力仅为122 MPa,断裂伸长率可达8%。展开更多
基金Project supported by the Science Fund of the Key Laboratory of Cryogenic Science and Technology(Grant Nos.CRYO20230203 and CRYO202106)the National Natural Science Foundation of China(Grant Nos.51872299 and 52071223)the National Key Research and Development Program of China(Grant No.2019YFA0704904)。
文摘Solid-state cooling technologies have been considered as potential alternatives for vapor compression cooling systems.The search for refrigeration materials displaying a unique combination of pronounced caloric effect,low hysteresis,and high reversibility on phase transformation was very active in recent years.Here,we achieved increase in the elastocaloric reversibility and decrease in the friction dissipation of martensite transformations in the superelastic nano-grained NiTi alloys obtained by cold rolling and annealing treatment,with very low stress hysteresis(6.3 MPa)under a large applied strain(5%).Large adiabatic temperature changes(△T_(max)=16.3 K atε=5%)and moderate COP_(mater)values(maximum COP_(mater)=11.8 atε=2%)were achieved.The present nano-grained NiTi alloys exhibited great potential for applications as a highly efficient elastocaloric material.
基金sponsored by the National Key Research and Development Program of China(No.2020YFB0311102)the Ningbo“Science and Technology Innovation 2025”Major Project,China(No.2019B10087)+1 种基金the Project of State Key Laboratory of Powder Metallurgy at Central South UniversityYoung People Fund of Jiangxi Province,China(No.2018BAB216005)。
文摘采用Gleeble-3500热模拟试验机对在变形温度500~650℃和应变速率0.001~1 s^(-1)条件下的60NiTi合金进行热压缩变形,分析其热变形行为和显微组织,建立变形本构模型,绘制热加工图。结果表明,当压缩温度升高或应变速率降低时,峰值应力减小。合金的热变形激活能为327.89 k J/mol,热加工工艺参数为变形温度600~650℃和应变速率0.005~0.05 s^(-1)。当变形温度升高时,合金的再结晶程度增大;当应变速率增大时,位错密度和孪晶数量增大,Ni3Ti相易于聚集;Ni3Ti析出相有利于诱发合金基体的动态再结晶。动态回复、动态再结晶和孪生是60NiTi合金热变形的主要机制。
