Geochemistry and origins of hydrogen-containing natural gases in deep Songliao Basin,China:Insights from continental scientific drilling

The different reservoirs in deep Songliao Basin have non-homogeneous lithologies and include multiple layers with a high content of hydrogen gas.The gas composition and stable isotope characteristics vary significantly,but the origin analysis of different gas types has previously been weak.Based on the geochemical parameters of gas samples from different depths and the analysis of geological settings,this research covers the diverse origins of natural gas in different strata.The gas components are mainly methane with a small amount of C_(2+),and non-hydrocarbon gases,including nitrogen(N_(2)),hydrogen(H_(2)),carbon dioxide(CO_(2)),and helium(He).At greater depth,the carbon isotope of methane becomes heavier,and the hydrogen isotope points to a lacustrine sedimentary environment.With increasing depth,the origins of N_(2)and CO_(2)change gradually from a mixture of organic and inorganic to inorganic.The origins of hydrogen gas are complex and include organic sources,water radiolysis,water-rock(Fe^(2+)-containing minerals)reactions,and mantle-derived.The shales of Denglouku and Shahezi Formations,as source rocks,provide the premise for generation and occurrence of organic gas.Furthermore,the deep faults and fluid activities in Basement Formation control the generation and migration of mantle-derived gas.The discovery of a high content of H_(2)in study area not only reveals the organic and inorganic association of natural-gas generation,but also provides a scientific basis for the exploration of deep hydrogen-rich gas.

Key geological factors governing sweet spots in the Wufeng-Longmaxi shales of the Sichuan Basin,China

Production performance of the Wufeng-Longmaxi shales varies significantly among Fuling,Weirong,and Wulong fields in the Sichuan Basin.Total organic carbon(TOC)content,mineralogy,and organic matter(OM)pore characteristics are investigated to identify key factors governing sweet spots.Siliceous shales with good preservation conditions in the Fuling Field exhibit large thickness,high TOC content and thin-section porosity(TSP),and well-developed OM macropores,thus high initial production and estimated ultimate recovery(EUR).Thin carbonate-containing siliceous shales with good preservation conditions in the Weirong Field feature medium-to-high TOC and well-developed OM macropores but low TSP,leading to high initial production but low EUR.Siliceous shales with poor preservation conditions in the Wulong Field are characterized by large thickness,high TOC,low TSP and poorly-developed OM macropores,causing low initial production and EUR.Both sedimentary and preservation conditions are intrinsic decisive factors of sweet spots,as they control the mineral composition,TOC,and OM macropore development.Deep-water shales in transgressive systems tracts(TSTs)exhibit better-developed OM macropores and greater TOC compared to highstand systems tracts(HSTs).OM macropores are most prevalent in siliceous shales,followed by carbonate-containing siliceous shales and then argillaceous shales.Furthermore,good preservation conditions are conducive to retain OM macropores with low pore aspect ratio(PAR).Comparison among the three fields shows that high-TOC silicious shales with good preservation conditions are the highest in TSP and EUR.Therefore,organic richness,lithofacies,and preservation conditions are the major factors which determine OM pore development,governing the sweet spots of the Wufeng-Longmaxi shales.

Improved reservoir characterization by means of supervised machine learning and model-based seismic impedance inversion in the Penobscot field,Scotian Basin

The present research work attempted to delineate and characterize the reservoir facies from the Dawson Canyon Formation in the Penobscot field,Scotian Basin.An integrated study of instantaneous frequency,P-impedance,volume of clay and neutron-porosity attributes,and structural framework was done to unravel the Late Cretaceous depositional system and reservoir facies distribution patterns within the study area.Fault strikes were found in the EW and NEE-SWW directions indicating the dominant course of tectonic activities during the Late Cretaceous period in the region.P-impedance was estimated using model-based seismic inversion.Petrophysical properties such as the neutron porosity(NPHI)and volume of clay(VCL)were estimated using the multilayer perceptron neural network with high accuracy.Comparatively,a combination of low instantaneous frequency(15-30 Hz),moderate to high impedance(7000-9500 gm/cc*m/s),low neutron porosity(27%-40%)and low volume of clay(40%-60%),suggests fair-to-good sandstone development in the Dawson Canyon Formation.After calibration with the welllog data,it is found that further lowering in these attribute responses signifies the clean sandstone facies possibly containing hydrocarbons.The present study suggests that the shale lithofacies dominates the Late Cretaceous deposition(Dawson Canyon Formation)in the Penobscot field,Scotian Basin.Major faults and overlying shale facies provide structural and stratigraphic seals and act as a suitable hydrocarbon entrapment mechanism in the Dawson Canyon Formation's reservoirs.The present research advocates the integrated analysis of multi-attributes estimated using different methods to minimize the risk involved in hydrocarbon exploration.

Response of ecosystem carbon storage to land use change from 1985 to 2050 in the Ningxia Section of Yellow River Basin,China

Regional sustainable development necessitates a holistic understanding of spatiotemporal variations in ecosystem carbon storage(ECS),particularly in ecologically sensitive areas with arid and semi-arid climate.In this study,we calculated the ECS in the Ningxia Section of Yellow River Basin,China from 1985 to 2020 using the Integrated Valuation of Ecosystem Services and Tradeoffs(InVEST)model based on land use data.We further predicted the spatial distribution of ECS in 2050 under four land use scenarios:natural development scenario(NDS),ecological protection scenario(EPS),cultivated land protection scenario(CPS),and urban development scenario(UDS)using the patch-generating land use simulation(PLUS)model,and quantified the influences of natural and human factors on the spatial differentiation of ECS using the geographical detector(Geodetector).Results showed that the total ECS of the study area initially increased from 1985 until reaching a peak at 402.36×10^(6) t in 2010,followed by a decreasing trend to 2050.The spatial distribution of ECS was characterized by high values in the eastern and southern parts of the study area,and low values in the western and northern parts.Between 1985 and 2020,land use changes occurred mainly through the expansion of cultivated land,woodland,and construction land at the expense of unused land.The total ECS in 2050 under different land use scenarios(ranked as EPS>CPS>NDS>UDS)would be lower than that in 2020.Nighttime light was the largest contributor to the spatial differentiation of ECS,with soil type and annual mean temperature being the major natural driving factors.Findings of this study could provide guidance on the ecological construction and high-quality development in arid and semi-arid areas.

Exploration Experience and Problem concerning Deep Basin Gas in the Ordos Basin

Deep basin gas (DBG) reservoirs, in view of the characteristics of their main parts containing gas, are a type of subtle stratigraphic lithologic traps. But they have different reservoir-forming principles, especially in the distribution of oil, gas and water. DBG is characterized by gas-water invertion, namely the water located above the gas; however, normal non-anticline subtle reservoirs have normal distribution of gas and water, namely the water located under the gas. The theory of DBG broke the conventional exploration idea that gas is usually found in the high part of reservoir and water is under the gas. So, it provided a wide field and a new idea for the exploration of natural gas. Recently Ben E. Law (2002), in his article entitled "Basin-centered Gas Systems", discussed global DBG systemically. He listed 72 basins or areas containing known or suspected DBG, covering North America, South America, Europe, Asia-Pacific, South Asia, Middle East and Africa. Ordos basin, the Sichuan basin and the Jungar basin in China are presented and assumed to be of very high possibility. In China more attention has been paid to the research and exploration of DBG in the past years. The symposiums on DBG were held twice, in Guangzhou in 1998 and in Xi'an in 2000 respectively. In 2002 in particular, the publication of the book named Deep Basin Gas in China by Professor Wangtao indicated that China has entered a new stage in the research on DBG Meanwhile, it is more cheering that the exploration of DBG in the Ordos Basin has achieved remarkable success. Therefore, analyzing the exploration experiences and problems regarding the Ordos basin will promote the exploration and research of DBG in China.

Alteration and Reformation of Hydrocarbon Reservoirs and Prediction of Remaining Potential Resources in Superimposed Basins

Complex hydrocarbon reservoirs developed widely in the superimposed basins of China formed from multiple structural alterations, reformation and destruction of hydrocarbon reservoirs formed at early stages. They are characterized currently by trap adjustment, component variation, phase conversion, and scale reformation. This is significant for guiding current hydrocarbon exploration by revealing evolution mechanisms after hydrocarbon reservoir formation and for predicting remaining potential resources. Based on the analysis of a number of complex hydrocarbon reservoirs, there are four geologic features controlling the degree of destruction of hydrocarbon reservoirs formed at early stages： tectonic event intensity, frequency, time and caprock sealing for oil and gas during tectonic evolution. Research shows that the larger the tectonic event intensity, the more frequent the tectonic event, the later the last tectonic event, the weaker the caprock sealing for oil and gas, and the greater the volume of destroyed hydrocarbons in the early stages. Based on research on the main controlling factors of hydrocarbon reservoir destruction mechanisms, a geological model of tectonic superimposition and a mathematical model evaluating potential remaining complex hydrocarbon reservoirs have been established. The predication method and technical procedures were applied in the Tazhong area of Tarim Basin, where four stages of hydrocarbon accumulation and three stages of hydrocarbon alteration occurred. Geohistorical hydrocarbon accumulation reached 3.184 billion tons, of which 1.271 billion tons were destroyed. The total volume of remaining resources available for exploration is -1.9 billion tons.

Mining seismicity in the Witwatersrand Basin:monitoring,mechanisms and mitigation strategies in perspective

The Kaapvaal Craton in South Africa hosts one of the largest gold placer deposits in the world. Mining in the Witwatersrand Basin here has been the source of about one third to one half of the gold ever produced in the world. Gold was discovered in the Johannesburg area in 1886 and after 120 years of continuous operation, mining is currently approaching depths of 4 000 m. In spite of the challenges and risks that the industry has had to deal with including rock temperature, ventilation and water, one of the most feared hazards in the basin has been the threat from the ongoing occurrence of seismicity and rockbursts. The problem first manifested itself by way of the occurrence of tremors roughly twenty years after the commencement of mining operations. This paper traces the history of the approach to rockbursts and seismicity during the 120 year history of mining in the basin. It portrays a picture of the mining seismicity in terms of monitoring phases, mechanisms and mitigation strategies. The work of research organizations over the years is highlighted with a brief mention of current regulation strategies on the part of the mining inspectorate.

Modes of Occurrence and Cleaning Potential of Trace Elements in Coals from the Northern Ordos Basin and Shanxi Province, China

Based on the analyses of 43 elements in 16 samples of the raw coal and feed coal collected from the northern Ordos basin and Shanxi Province, the modes of occurrence of these elements were studied using the method of cluster analysis and factor analysis, and the cleaning potential of the hazardous elements relatively enriched in the coals was discussed by analyzing six samples of the cleaned coal from the coal-washing plants and coal cleaning simulation experiments. The results shows that the elements Br and Ba show a strong affinity to the organic matter, Cs, Cd, Pb, Zn and Hg partly to the organic matter, and the other trace elements are mainly associated with the mineral matter. Cs, Mo, P, Pb, Zn and S have positive correlations with the two principal factors, reflecting the complexity of their modes of occurrence. Some elements that were thought to show a faint relationship (Be with S and Sb with carbonates) in other rocks are found to have a strong interrelation in the coals. Clay minerals (mainly kaolinite) dominate in the coals, and Ta, Th, Ti, Sc, REE, Hf, U, Se, W, V, Nb, Mo, Al, P, Cr, Pb and Zn are distributed mostly in kaolinite, while K, Rb, Cs, and Na have much to do with illite. Conventional cleaning can reduce the concentrations of most hazardous elements in various degrees. The hazardous elements S, As, Sb, Se, Mo, Pb, Cd and Hg relatively enriched in some coals from the area studied have a relatively high potential of environmental risks. However, by physical coal cleaning processes, more than 60% of As and Hg were removed, showing a high degree of removal, more than 30% of Sb, as well as S, Pb and Cd partly associated with the inorganic matter were removed. Se and Mo showing a relatively low degree of removal could be further removed by deep crushing of the coal during physical cleaning processes, and the concentrations of S, Pb, Cd and Hg with a partial association with the organic matter could be decreased in such ways as the coal blending. Cluster analysis together with factor analysis is a rapid and effective way to deduce the mode of occurrence of an element from bulk samples, and the removability data of most hazardous elements are basically consistent with their modes of occurrence suggested, which indicates that the statistical analysis could predict the cleaning potential of hazardous elements during the physical coal cleaning.

HOH XIL PIGGYBACK BASINS:IMPLICATIONS FOR PALEOGENE SHORTENING OF THE TIBETAN PLATEAU

Strong deformed sediments investigated in the Hoh Xil basin may contain detailed records for early Tertiary crustal shortening in northern Tibet (Fig.1A). Sedimentary sequences in the basin consist of the Fenghuoshan Group, the Yaxicuo Group, and the early Miocene Wudaoliang Group from lower to upper. Magnetostratigraphic research has indicated the Eocene to early Oligocene ages for the Fenghuoshan and Yaxicuo Groups (Liu, et al., 2000). Total 29 lithological sections with 20487 7m thick were measured spread all over the 101000km\+2 Hoh Xil basin, the largest Tertiary sedimentary basin in the hinterland of the Tibetan plateau, to reveal the prototype basin and its evolution processes. They include 17 sections with 14925 3m thick of the Fenghuoshan Group, 8 sections with 4273 5m thick of the Yaxicuo Group, and 4 sections with 1284 9m thick of the Wudaoliang Group.

Mathematical simulation and observation of ground subsidence basin in coal mining area

Based on a great amount of practically observational data and by computer simulation, a formula for estimating the ground subsidence caused by coal mining was derived. Meanwhile, an empirical mathematical model for ground subsidence basin in coal mining was given.

Fracability Evaluation of Shale of the Wufeng-Longmaxi Formation in the Changning Area, Sichuan Basin

The fracturing technology for shale gas reservoir is the key to the development of shale gas industrialization.It makes much sense to study the mechanical properties and deformation characteristics of shale,due to its close relationship with the fracability of shale gas reservoir.This paper took marine shale in the Changning area,southern Sichuan Basin of China as the research object.Based on field profile and hand specimen observation,we analyzed the development of natural fractures and collected samples from Wufeng Formation and Longmaxi Formation.Combining with the indoor experiment,we investigated the macroscopic and microscopic structural features and the remarkable heterogeneity of shale samples.Then we illustrated the mechanics and deformation characteristics of shale,through uniaxial compression test and direct shear test.The shale has two types of fracture modes,which depend on the angular relation between loading direction and the bedding plane.Besides,the Wufeng shale has a higher value of brittleness index than the Longmaxi shale,which was calculated using two methods,mechanical parameters and mineral composition.Given the above results,we proposed a fracability evaluation model for shale gas reservoir using the analytic hierarchy process.Four influence factors,brittleness index,fracture toughness,natural fractures and cohesive force,are considered.Finally,under the control of normalized value and weight coefficient of each influence factor,the calculations results indicate that the fracability index of the Wufeng Formation is higher than that of the Longmaxi Formation in Changning area,southern Sichuan Basin.

Effects of torpedo blasting on rockburst prevention during deep coal seam mining in the Upper Silesian Coal Basin

In the Upper Silesian Coal Basin(USCB),coal seams are exploited under progressively more difficult geological and mining conditions(greater depth,higher horizontal stress,more frequent occurrence of competent rock layers,etc.).Mining depth,dislocations and mining remnants in coal seams are the most important factors responsible for the occurrence of rockburst hazards.Longwall mining next to the mining edges of neighbouring coal seams is particularly disadvantageous.The levels of rockburst hazards are minimised via the use of rockburst prevention methods.One active prevention method is torpedo blasting in roof rocks.Torpedo blastings are performed in order to decrease local stress concentrations in rock masses and to fracture the roof rocks to prevent or minimise the impact of high-energy tremors on excavations.The estimation of the effectiveness of torpedo blasting is particularly important when mining is under difficult geological and mining conditions.Torpedo blasting is the main form of active rockburst prevention in the assigned colliery in the Polish part of the USCB.The effectiveness of blasting can be estimated using the seismic effect method,in which the seismic monitoring data and the mass of explosives are taken into consideration.The seismic effect method was developed in the Czech Republic and is always being used in collieries in the Czech part of the coal basin.Now,this method has been widely adopted for our selected colliery in the Polish part of the coal basin.The effectiveness of torpedo blastings in the faces and galleries of the assigned longwall in coal seam 506 has been estimated.The results show that the effectiveness of torpedo blastings for this longwall was significant in light of the seismic effect method,which corresponds to the in situ observations.The seismic effect method is regularly applied to estimating the blasting effectiveness in the selected colliery.

Physiographic-Tectonic Zoning of Iran’s Sedimentary Basins

Base on geological history evaluation using regional stratigraphy, sedimentary environments, magmatic activities, metamorphism and structural trend in Iran, physiographic-tectonic zoning map of Iran’s sedimentary basins has prepared. This map has prepared to point out the basement tectonics role in Iran. It contains twenty-four different provinces. Iran has composed from different plates: Arabian plate in south and west, Cimmerian manipulated in north and east, Eurasian plate in northeast margin. Cimmerian manipulated at least can be divided to the smaller part, East-Central Iran and North-Central Iran microcontinents. There are evidences for thick-skinned tectonics in the border zones of these plates and microcontinents, especially in Sanandaj-Sirjan overthrust belts that it formed by crustal stacking wedges. Also, Neoproterozoic-Phanerozoic Tectonic column in the Arabian, Cimmerian and Eurasian plates under Iran Country area have introduced.

Generation of Back-Arc Basins as Side Effect of Shortening Processes: Examples from the Central Mediterranean

The evolution of the Mediterranean area since the Oligocene-Lower Miocene has been driven by the convergence of the surrounding plates. This implies that the observed deformation pattern in that region must be the most convenient shortening pattern, i.e. the one controlled by the minimum action principle. To understand why the fulfilment of such condition has required a complex spatio-temporal distribution of major tectonic events, such as uplift, lateral displacement and bending of orogenic belts, consumption of large lithospheric domains and formation of back arc basins, it may be very useful to take into account a basic tectonic concept, which helps to identify the process that can minimize the resistance of tectonic forces. Such concept starts from the fact that the most convenient consumption process is the one that involves low buoyancy oceanic lithosphere (Tethyan domains). However, such process is highly favoured where the oceanic lithosphere is stressed by vertical forces, a situation that develops when orogenic wedges are forced to over thrust and load the oceanic domain to be consumed. This interpretation can provide plausible and coherent explanations for the complex pattern of the observed deformations. In this view, the generation of back arc basins is taken as a side effect of an extrusion process, as suggested by numerical and mechanical experiments.

TECTONO-SEDIMENTARY EVOLUTION OF THE TERTIARY BASINS IN EASTERN TIBET: CONSTRAINING THE RAISING OF TIBETAN PLATEAU

The Tertiary basins are distributed in the eastern margin of the Tibetan Plateau along the large\|scale arc\|shaped strike\|slip belt of the Qiangtang—Hengduan Shan—Jinshajiang—Red River belt. Most of basins were controlled by regional northwest\| and south\|north treading faults, and a few basins were constrained by northwest\| or north\|north\|east\|treading local faults.The detailed field mapping and sedimentologic observations for 6 typical Tertiary basins in eastern Tibet show that their types include depressive basins, rifting basins, pull\|apart and extensional basins related to strike\|slip faulting, and erosion\|residual basins. Recently, most of them are controlled by compression\| or thrust\|related margin faults in single side or double laterals of these basins. Not\|well\|developed strata in the Tertiary basins were deformed to form various tight folds and thrusts. High\|K magma intruded widely into the basins. The tectono\|sedimentary evolution of the Tertiary basins appears tempo\|spatially inhomogeneous. The preliminary model to interpret the Tertiary basin evolution is described as below.

Investigation of plateau basin crustal structures and thickening mechanisms in the northeastern margin of the Tibetan plateau

This paper uses deep seismic sounding （DSS） data to contrast and analyze the crustal structures of three plateau basins （Songpan-Garze, Qaidam, Longzhong） in the northeastern margin of the Qinghai-Xizang （Tibetan） plateau, as well as two stable cratonic basins （Ordos, Sichuan） in its peripheral areas. Plateau basin crustal structures, lithological variations and crustal thickening mechanisms were investigated. The results show that, compared to the peripheral stable cratonic basins, the crystalline crusts of plateau basins in the northeastern margin are up to 10 15 km thicker, and the relative medium velocity difference is about 5% less. The medium velocity change in crustal layers of plateau basin indicates that the upper crust undergoes brittle deformation, whereas the lower crust deforms plastically with low velocity. The middle crust shows a brittle-to-plastic transition zone in this region. Thickening in the lower crust （about 5 10 km）, and rheological characteristics that show low- medium velocity （relatively reduced by 7%）, suggest that crustal thickening mainly takes place in lower crust in the northeastern margin of the Tibetan plateau. The crust along the northeastern margin shows evidence of wholesale block movement, and crustal shortening and thickening seem to be the main deformation features of this region. The GPS data show that the block motion modes and crustal thickening in the Tibetan plateau is closely related to the peripheral tectonic stress field and motion direction of the Indian plate. The Mani-Yushu- Xianshuihe fold belt along the boundary between the Qiangtang block and the Bayan Har block divides the different plateau thickening tectonic environments into the middle-western plateau, the northeastern margin and the southeastern plateau.

Maintaining healthy rivers and lakes through water diversion from Yangtze River to Taihu Lake in Taihu Basin

On the basis of the Taihu water resources assessment, an analysis of the importance and rationality of the water diversion from the Yangtz,e River to Taihu Lake in solving the water problem and establishing a harmonious eco-environment in the Taihu Basin is performed. The water quantity and water quality conjunctive dispatching ＇decisi＂ofi-makifig support system, which ensures flood control, water supply and eco-aimed dispatching, is built by combining the water diversion with flood control dispatching and strengthening water resources monitoring and forecasting. With the practice and effect assessment, measures such as setting the -integrated basin management format, further developing water diversion and improving the hydraulic engineering projects system and water monitoring system are proposed in order to maintain healthy rivers and guarantee the development of the economy and society in the Taihu Basin.

Exhumation History of the Xining Basin Since the Mesozoic and Its Tectonic Significance

The Xining Basin is located in the northeastern Qinghai-Tibetan Plateau, and its continuous Cenozoic strata record the entire uplift and outgrowth history of the Tibetan Plateau during the Cenozoic. The newly obtained apatite fission track data presented here shows that the Xining Basin and two marginal mountain ranges have experienced multiphase rapid cooling since the Jurassic, as follows. In the Middle-Late Jurassic, the rapid exhumation of the former Xining Basin resulted from collision between the Qiangtang Block and the Tarim Block. During the Early-Late Cretaceous, the former Xining Basin underwent a tectonic event due to marginal compression, causing the angular unconformity between the Upper and Lower Cretaceous. In the Late Cretaceous to the Early Cenozoic, collision between the Qiangtang Block and the Lhasa Block may have resulted in the rapid exhumation of the Xining Basin and the Lajishan to the south. In the Early Cenozoic （ca. 50-30 Ma）, collision between the Indian and Eurasia plates affected the region that corresponds to the present northeastern Qinghai-Tibetan Plateau. During this period, the central Qilian Block rotated clockwise by approximately 24° to form a wedge-shaped basin （i.e., the Xining Basin） opening to the west. During ca. 17-8 Ma, the entire northeastern Qinghai-Tibetan Plateau underwent dramatic deformation, and the Lajishan uplifted rapidly owing to the northward compression of the Guide Basin from the south. A marked change in subsidence occurred in the Xining Basin during this period, when the basin was tectonically inverted.

Three Types of Spatial Function Zoning in Key Ecological Function Areas Based on Ecological and Economic Coordinated Development: A Case Study of Tacheng Basin, China

Three types of spatial function zoning is an effective measure for regional environmental protection and orderly development.For ecological and economic coordinated development, spatial function zones should be divided scientifically to clear its direction of development and protection. Therefore, based on ecological constraints, a beneficial discussion would be about the key ecological function areas adopting the concept of ecological protection restriction and supporting socioeconomic development for spatial function zoning. In this paper, the researchers, taking Tacheng Basin, Xinjiang of China as an example, choose township as basic research unit and set up an evaluation index system from three aspects, namely, ecological protection suitability, agricultural production suitability, and urban development suitability, which are analyzed by using spatial analysis functions and exclusive matrix method. The results showed that: 1) This paper formed a set of multilevel evaluation index systems for three types of spatial function zoning of the key ecological function areas based on a novel perspective by scientifically dividing Tacheng Basin into ecological space, agricultural space, and urban space,which realized the integration and scientific orientation for spatial function at the township scale. 2) Under the guidance of three types of spatial pattern, the functional orientation and suggestions of development and protection was clearly defined for ecological protection zones,ecological economic zones, agricultural production zones, and urban development zones. 3) A new idea of space governance is provided to promote the coordinated and sustainable development between ecology and economy, which can break the traditional mode of thinking about regional economic development, and offers a scientific basis and reference for macro decision-making.

DEFINITING AND ITS GEOLOGIC MEANING OF SOUTH-NORTH TREND FAULTED STRUCTURE BELT IN QIANGTANG BASIN, NORTH PART OF TIBET

There were more expounding to north—west (west) trend fault and north\|east trend fault within Qiangtang Basin, North Part of Tibet, in the past literature. With increasing of geophysical exploration data, nearly east\|west trend structure began to be taken note to. Since the year of 1995, by a synthetic study to geophysical and geological data, that south\|north trend faulted structures are well developed. These structures should be paid much more attention to, because they have important theoretical meaning and practical significance.1 Spreading of south\|north faulted structure belt According to different geological and geophysical data, the six larger scale nearly south\|north faulted structure belt could be distinguished within the scope of east longitude 84°～96° and near Qiangtang Basin. The actual location of the six belts are nearly located in the west of the six meridian of east longitude 85°,87°,89°,91°,93°,95° or located near these meridian. The six south\|north faulted structure belts spread in the same interval with near 2° longitude interval. The more clear and much more significance of south\|north trend faulted structure belts are the two S—N trend faulted structure belts of east longitude 87° and 89°. There are S—N trend faulted structure belts in the west of east longitude 83°,81°, or near the longitudes. The structure belts spreading features,manifestation,geological function and its importance, and inter texture and structure are not exactly so same. The structure belts all different degree caused different region of geological structure or gravity field and magnetic field. There is different scale near S—N trend faulted structure belt between the belts.