The effect of surface state on the nodular corrosion resistance of Zircaloy-4 alloy was investigated in super- heated steam at 500 ℃/10.3 MPa by autoclave tests. The microstructures of oxide films on the corroded spe...The effect of surface state on the nodular corrosion resistance of Zircaloy-4 alloy was investigated in super- heated steam at 500 ℃/10.3 MPa by autoclave tests. The microstructures of oxide films on the corroded specimens were observed by TEM and SEM. The results indicate that surface strained layer delays the appearance of nodular spots on the specimen surfaces and improves the nodular corrosion resistance. The columnar grains orientation of the oxide films formed on the specimens with surface strained layer was more consistent than that on the specimens without surface strained layer when a comparison was made on the same orientation of the grain surfaces. Such a kind of oxide micro- structure formed on the specimens with surface strained layer can hinder the diffusion of oxygen ions along the grain boundaries and delay the growth of oxide films, therefore retard the formation process of nodular spots. This indicates that the microstructure of the initial oxide films has an important influence on the subsequent growth of the oxide films.展开更多
Corrosion re sistance of Zircaloy-4 alloy tube in superheated steam at 673 K/10.3 MPa is anisotropic.A part of the surface undergoes uniform corrosion while the other suffers nodular corrosion.Narrow and wide nodules ...Corrosion re sistance of Zircaloy-4 alloy tube in superheated steam at 673 K/10.3 MPa is anisotropic.A part of the surface undergoes uniform corrosion while the other suffers nodular corrosion.Narrow and wide nodules are observed after an exposure period of 3 and 30 days,respectively.A new matrix transformation method is established in order to study the formation mechanism of nodules in the cross-section(CS) of Zircaloy-4 alloy tube using the EBSD technique,while the CS perpendicular to axial direction(AD).The results reveal that the microtexture is a key factor behind the two types of corrosion.Furthermore,the oxide layers grow anisotropically over the corroded surface.A thick oxide layer forms over the nodular corrosion region on the grains with c-axis oriented in the range of 40° around tangential direction(TD),whereas a thin oxide layer over the uniform corrosion region is detected on the grains with c-axis oriented in the range of 68° around TD.In short,the anisotropic growth of oxide layer was caused by the change of microtexture of the Zr-4 alloy tube,and this anisotropic growth of oxide layer contributed to the nodules formation.展开更多
基金financially supported by the National Natural Science Foundation of China (No. 51171102)
文摘The effect of surface state on the nodular corrosion resistance of Zircaloy-4 alloy was investigated in super- heated steam at 500 ℃/10.3 MPa by autoclave tests. The microstructures of oxide films on the corroded specimens were observed by TEM and SEM. The results indicate that surface strained layer delays the appearance of nodular spots on the specimen surfaces and improves the nodular corrosion resistance. The columnar grains orientation of the oxide films formed on the specimens with surface strained layer was more consistent than that on the specimens without surface strained layer when a comparison was made on the same orientation of the grain surfaces. Such a kind of oxide micro- structure formed on the specimens with surface strained layer can hinder the diffusion of oxygen ions along the grain boundaries and delay the growth of oxide films, therefore retard the formation process of nodular spots. This indicates that the microstructure of the initial oxide films has an important influence on the subsequent growth of the oxide films.
文摘Corrosion re sistance of Zircaloy-4 alloy tube in superheated steam at 673 K/10.3 MPa is anisotropic.A part of the surface undergoes uniform corrosion while the other suffers nodular corrosion.Narrow and wide nodules are observed after an exposure period of 3 and 30 days,respectively.A new matrix transformation method is established in order to study the formation mechanism of nodules in the cross-section(CS) of Zircaloy-4 alloy tube using the EBSD technique,while the CS perpendicular to axial direction(AD).The results reveal that the microtexture is a key factor behind the two types of corrosion.Furthermore,the oxide layers grow anisotropically over the corroded surface.A thick oxide layer forms over the nodular corrosion region on the grains with c-axis oriented in the range of 40° around tangential direction(TD),whereas a thin oxide layer over the uniform corrosion region is detected on the grains with c-axis oriented in the range of 68° around TD.In short,the anisotropic growth of oxide layer was caused by the change of microtexture of the Zr-4 alloy tube,and this anisotropic growth of oxide layer contributed to the nodules formation.
