In Situ Determination of the Effect of Drilling Noise and Vibration on Growth of Grass Carp, Myloparyngodon Piceus

The study is carried out on the effect of drilling noise and vibration on growth of grass carp, Myloparyngodon Piceus, by using cut-fin marking method in situ. Compared with other methods, the method is more appropriate, for its operation is simpler and more data may be obtained under the same condition. The results show that drilling noise and vibration have significant effect on the growth of grass carp. Critical equivalent noise and vibration grade ( Nleq and Vleq ) are about 84.4 dB and 90.2 dB, and the affecting radius is about 8.5 m. The effect of drilling noise and vibration could be influenced by some factors, such as duration of pollution and body weight of grass carp, etc. Grass carp’s growth could rapidly recover after removing drilling noise and vibration, indicating that the drilling noise and vibration do not damage the fish organs and the effect is reversible. Therefore, the effect mechanism may be due to the activating response of non-hearing system.

INCE PUBLISHES BERANEK ’S NOISE AND VIBRATION CONTROL

A Revised Edition of the now-classical 1971 text edited by L.Beranek,Noise and Vibration Control,has been published by the Institute of NoiseControl Engineering.Noise and Vibration Control is of great value to designand safety engineers,consultants,scientists,architects,governmentresearchers,public officials and others concerned with the control of noiseemitted by machinery and with control of environmental noise in buildings,in the workplace,near airports and highways,and in the community.This

State Estimation for Sound and Vibration Emitted from a Machine Based on Sound Measurement Under Existenceof Background Noise

Many studies on the diagnosis for machines have become important recently because of increased use of various complex industrial systems.The correlation information between sound and vibration is very important for machine diagnosis.Usually,vibration pickups are attached directly to the machine in order to measure vibration data.However,in some cases,the sensors can not be attached directly on highly precise devices.In this study,a method to estimate the fluctuation of sound and vibration is proposed based on the measurement data of sound emitted from the machine under existence of background noise.The effectiveness of the proposed theory is experimentally confirmed by applying it to the observed data emitted from a rotational machine driven by an electric motor.

Railway ground vibration and mitigation measures: benchmarking of best practices

Vibration and noise aspects play a relevant role in the lifetime and comfort of urban areas and their resi-dents.Among the different sources,the one coming from the rail transit system will play a central concern in the following years due to its sustainability.Ground-borne vibration and noise assessment as well as techniques to mitigate them become key elements of the environmental impact and the global enlargement planned for the railway industry.This paper aims to describe and compare the different mitigation systems existing and reported in liter-ature through a comprehensive state of the art analysis providing the performance of each measure.First,an introduction to the ground-borne vibration and noise gen-erated from the wheel-rail contact and its propagation through the transmission path is presented.Then,the impact and the different ways of evaluating and assessing these effects are presented,and the insertion loss indicator is introduced.Next,the different mitigation measures at different levels(vehicle,track,transmission path and receiver)are discussed by describing their possible appli-cation and their efficiency in terms of insertion loss.Finally,a summary with inputs of how it is possible to address the future of mitigation systems is reported.

Research on Influence of Damping Material on Structure Performance of Torpedo

Reducing the self-noise and radiated noise of torpedo is an effective way to enhance its detection and concealment capabilities.After discussing the basic principle on noise and vibration control and main noise sources in torpedo,the application of damping treatment for noise and vibration absorption was proposed in this paper.Compared composite materials(damping and metal materials)used as segment joint,their different contributions to the damping performance of base structure were investigated.The results show that the damping material can be used as segment joint effectively in vibration control.Taking cantilever beam as an example,four different damping treatments were compared in natural frequency and damping loss factor,the results show the influences of different damping layer layouts on the structure damping performance,and offer a reference for the torpedo shell design.

Overview on Amorphous Alloy Electrical Machines and Their Key Technologies

Amorphous alloy(AA)is attracting more and more attention in electrical machines due to its excellent low loss characteristics.This paper overviews advances on AA electrical machines over the last 30 years,with particular reference to new and novel topologies and processing techniques of AA electrical machines and their key technologies.These include current states and trends for radial-flux AA electrical machines,axial-flux AA electrical machines,influences of processing techniques on electrical performance of AA iron cores,the characteristics of loss and vibration and noise of AA core and AA machines,optimum design of AA electrical machines,etc.The paper highlights the application prospects of the AA electrical machines.

Technical note：Large amplitude free vibration of a flexible panel coupled with a leaking cavity

This paper addresses the effect of leakage on the natural frequencies of a large amplitude vibrating panel backed by a cavity, which has not been considered in many other related studies. The structural-acoustic governing equations are employed to study this nonlinear problem. An elliptical integral method, which was recently developed for the nonlinear panel cavity problem, is introduced here to solve for the structural-acoustics responses. The present results agree reasonably well with those obtained from the classical harmonic balance method. Modal convergences of the nonlinear solutions are performed to verify the proposed method. The effects of vibration amplitude and leakage size are studied and discussed. It is found that （1） the edge leakages in a panel cavity system significantly affect the natural frequency properties, and （2） the edge leakages induce a low frequency acoustic resonance.