Terahertz Three-Dimensional Imaging Based on Computed Tomography with Photonics-Based Noise Source

Computed tomography has been proven to be useful for non-destructive inspection of structures and materials. We build a three-dimensional imaging system with the photonically generated incoherent noise source and the Schottky barrier diode detector in the terahertz frequency band （90–140GHz）. Based on the computed tomography technique, the three-dimensional image of a ceramic sample is reconstructed successfully by stacking the slices at different heights. The imaging results not only indicate the ability of terahertz wave in the non-invasive sensing and non-destructive inspection applications, but also prove the effectiveness and superiority of the uni-traveling-carrier photodiode as a terahertz source in the imaging applications.

A Fast Approach for Predicting Aerodynamic Noise Sources of High-Speed Train Running in Tunnel

The aerodynamic noise of high-speed trains passing through a tunnel has gradually become an important issue.Numerical approaches for predicting the aerodynamic noise sources of high-speed trains running in tunnels are the key to alleviating aerodynamic noise issues.In this paper,two typical numerical methods are used to calculate the aerodynamic noise of high-speed trains.These are the static method combined with non-reflective boundary conditions and the dynamic mesh method combined with adaptive mesh.The fluctuating pressure,flow field and aerodynamic noise source are numerically simulated using the abovemethods.The results showthat the fluctuating pressure,flow field structure and noise source characteristics obtained using different methods,are basically consistent.Compared to the dynamic mesh method,the pressure,vortex size and noise source radiation intensity,obtained by the static method,are larger.The differences are in the tail car and its wake.The two calculation methods show that the spectral characteristics of the surface noise source are consistent.The maximum difference in the sound pressure level is 1.9 dBA.The static method is more efficient and more suitable for engineering applications.

Effect of uneven noise source and/or station distribution on estimating the azimuth anisotropy of surface waves

With the development of the dense array,the surface wave velocity and azimuthal anisotropy under the array can be directly obtained by beamforming the noise cross-correlation functions(NCFs). However, the retrieval of the Green’s function by cross-correlating the seismic noise requires that the noise source has a uniform distribution. For the case with uneven noise source, the azimuthal dependence on the sources in the expression for the spatial coherence function, which corresponds to the NCF in the time domain,has the same form as the azimuthal dependence of the surface wave velocity in weakly anisotropic media. Therefore, the uneven noise source will affect the surface wave anisotropy extraction. In this study, three passive seismic methods, i.e.,beamforming, SPAC(spatial autocorrelation), and NCF, are compared to demonstrate that an uneven source distribution and uneven station distribution have equivalent effects on the outcome from each method. A beamforming method is proposed to directly extract the velocity and azimuthal anisotropy of surface waves. The effect of uneven noise source and/or station distribution on estimating the azimuth anisotropy of surface waves was investigated using data from the ChinArray Phase Ⅱ. A method for correcting the apparent anisotropy in beamforming results caused by an uneven station distribution is suggested.

Turbocharger Noise Prediction Using Broadband Noise Source Model

The noise prediction of the turbocharger is studied.The broadband noise source model is employed to predict the near-field noise of the turbocharger.The 3D software Solidworks is adopted to establish the model blades and inlet of turbocharger compressor,then this 3D model is introduced into the software CFD to calculate the flow-field under different inlet shapes,different blades shapes and different clearances between casing and impeller.On the base of the above simulation,the broadband noise source model is employed to calculate and analyze the near-field noise.The calculation shows that compressor static pressure values and the sound power values near the impeller outlet are the largest.Through the noise calculation by using broadband noise source model under different inlet shapes and blade shapes,we find that the noise level of the inlet of cylindrical and cone types are smaller.Compared with the current widespread used backward skewed or radial blades,there is little difference of the noise value of the inlet of the forward skewed blades.

Scanning paths for estimating sound power of noise sources by sound intensity scanning method

A mathematical model of deterndulng sound power by using the scanning method is developed. It is assumed that the scanning speed is constant and the noise source is stationary The accuracy of estimating sound power along some simple paths on the surfaces such as rectangle, disc and hemisphere is analyzed. It is argued that the accuracy of estimating sound power is strongly depended on a suitable selection of scan path. The accurate estdriation of sound power can be made by scanning along some simple paths.

Numerical Study on the Duct Noise Control of Single-Stage Axial Flow Fan with Wave Leading Edge Stator Blade Configurations

This study focuses on a single-stage axial flow fan, investigating the effect of three kinds of wave leading edge stator blades on its noise reduction. The DDES method and the duct acoustic analogy theory based on the penetrable data surface were used for noise prediction. The results showed that the three kinds of wave leading edge blades were effective in reducing the rotor-stator interaction tonal noise and also have a certain inhibitory effect on broadband noise. The A10W15 stator blade can effectively reduce broadband noise in the frequency range of 2200 - 4200 Hz. When the amplitude is increased to 20, the noise reduction effect is further enhanced. However, when the amplitude is increased to 30, the broadband noise reduction effect is no longer significant. Further research shows that the wave leading edge stator blades can significantly change the pressure fluctuation distribution on the leading edge and suction surface, which control the modal energy distribution. Finally, this paper analyzed multiple factors affecting the broadband noise reduction, such as the noise source cut-off and cut-on effect and correlation. The purpose of this paper is to explore the laws of the influence of wave leading edge blades on the duct noise of real fan, and to reveal its noise control mechanism. .

Outboard abnormal noise source localization method with curved surface projection based on time delay matching and weighting criterion

An improved localization method consisting of ＂filtering-time delay estimationhyperbolic localization＂ is proposed. Combining the empirical mode decomposition（EMD）and time delay estimation method based on generalized average magnitude difference function,the original signals are decomposed into intrinsic mode function（IMF） components. The energy distribution criterion and spectrum consistency criterion are used to select the IMFs, which can represent the physical characteristics of the source signal. Several sets of signals are applied to estimate the time delay, and then a vector matching criterion is proposed to select the correct time delay estimation. Considering the hydrophones location, a shell model is established and projected to a plane according to the quadrant before the hyperbolic localization. Results of mooring and sailing tests show that the proposed method improves the localization accuracy,and reduces the error caused by time delay estimation.

Joint DOA and polarization estimation for unequal power sources based on reconstructed noise subspace

In most literature about joint direction of arrival（DOA） and polarization estimation, the case that sources possess different power levels is seldom discussed. However, this case exists widely in practical applications, especially in passive radar systems. In this paper, we propose a joint DOA and polarization estimation method for unequal power sources based on the reconstructed noise subspace. The invariance property of noise subspace（IPNS） to power of sources has been proved an effective method to estimate DOA of unequal power sources. We develop the IPNS method for joint DOA and polarization estimation based on a dual polarized array. Moreover, we propose an improved IPNS method based on the reconstructed noise subspace, which has higher resolution probability than the IPNS method. It is theoretically proved that the IPNS to power of sources is still valid when the eigenvalues of the noise subspace are changed artificially. Simulation results show that the resolution probability of the proposed method is enhanced compared with the methods based on the IPNS and the polarimetric multiple signal classification（MUSIC） method. Meanwhile, the proposed method has approximately the same estimation accuracy as the IPNS method for the weak source.

Numerical Investigation on the Aerodynamic Noise Generated by a Simplified Double-Strip Pantograph

In order to understand the mechanism by which a pantograph can generate aerodynamic noise and grasp its farfield characteristics,a simplified double-strip pantograph is analyzed numerically.Firstly,the unsteady flow field around the pantograph is simulated in the frame of a large eddy simulation(LES)technique.Then the location of the main noise source is determined using surface fluctuating pressure data and the vortex structures in the pantograph flow field are analyzed by means of the Q-criterion.Based on this,the relationship between the wake vortex and the intensity of the aerodynamic sound source on the pantograph surface is discussed.Finally,the far-field aerodynamic noise is calculated by means of the Ffowcs Williams-Hawkings(FW-H)equation,and the contribution of each component to total noise and the frequency spectrum characteristics are analyzed.The results show that on the pantograph surface where vortex shedding or interaction with the wake of upstream components occurs,the pressure fluctuation is more intense,resulting in strong dipole sources.The far-field aerodynamic noise energy of the pantograph is mainly concentrated in the frequency band below 1500 Hz.The peaks in the frequency spectrum are mainly generated by the base frame,balance arm and the rear strip,which are also the main contributors to the aerodynamic noise.

载人潜水器支持母船水下辐射噪声评估和试验分析研究

This study investigates the underwater radiated noise(URN)of a manned submersible support mother ship.To this end,a detailed finite element model of the hull and outflow field is established,and the vibration wet mode of the scientific research ship is calculated.A combination of finite element and boundary element methods is used to analyze the spectral features of ship low-frequency URN.The URN source is comprehensively analyzed,the vibration energy is considered the basic parameter to describe the vibration,and the medium-and high-frequency URN of the ship are calculated using the statistical energy analysis.To obtain the full frequency-band URN of the ship,the risk position of exceeding the standard is determined,and the contribution of each main noise source in the ship to the URN is analyzed.The URN level of the ship is comprehensively measured in the free navigation state.The accuracy of the URN control evaluation model,and the method of the ship are verified.The data support for the ship to apply for the classification society certificate provides a scheme reference for the URN control of other scientific research ship in the future.

Numerical and experimental studies of hydraulic noise induced by surface dipole sources in a centrifugal pump

The influences of the four different surface dipole sources in a centrifugal pump on the acoustic calculating accuracy are studied in this paper, by using the CFD combined with the Lighthill acoustic analogy methods. Firstly, the unsteady flow in the pump is solved based on the large eddy simulation method and the pressure pulsations on the four different surfaces are obtained. The four surfaces include the volute surface, the discharge pipe surface, the inner surface of the pump cavity, and the interfaces between the impeller and the stationary parts as well as the outer surface of the impeller. Then, the software Sysnoise is employed to interpolate the pressure fluctuations onto the corresponding surfaces of the acoustic model. The Fast Fourier Transform with a Hanning window is used to analyze the pressure fluctuations and transform them into the surface dipole sources. The direct boundary element method is applied to calculate the noise radiated from the dipole sources. And the predicted sound pressure level is compared with the experimental data. The results show that the pressure fluctuations on the discharge pipe surface and the outer surface of the impeller have little effect on the acoustic simulation results. The pressure pulsations on the inner surface of the pump cavity play an important role in the internal flow and the acoustic simulation. The acoustic calculating error can be reduced by about 7% through considering the effect of the pump cavity. The sound pressure distributions show that the sound pressure level increases with the growing flow rate, with the largest magnitude at the tongue zone.

Passive phase noise compensation for fiber-optic radio frequency transfer with a nonsynchronized source

We propose a passive compensation fiber-optic radio frequency（RF） transfer scheme with a nonsynchronized RF stable source during a round-trip time, which can avoid high-precision phase-locking and efficiently suppress the effect of backscattering only using two wavelengths at the same time. A stable frequency signal is directly reproduced by frequency mixing at the remote site. The proposed scheme is validated by the experiment over a 40 km single mode fiber spool using nonsynchronized common commercial RF sources. The influence of the stability of nonsynchronized RF sources on the frequency transfer is investigated over different length fiber links.

STATISTIC PROPERTIES OF NOISE FIELD OF MOVING SOURCE IN SHALLOW WATER AND ITS EFFECTS ON SIGNAL PROCESSING FOR THE NOISE RANGING SONAR

In this paper the properties of space- time correlation function of the noise field of moving source in layered statistic inhomogeneous medium are studied and the effects of random fluctuating boundary are considered as well.It has been shown, theoretically and experimentally, multi-path propergating effects cause the dispersion of the correlation function and fluctuations of the medium refraction index and the boundary cause the fluctuation of it.The effect of the movement of the noise source on the output of real- time correlator is equivalent to a low- pass filter added the drift of space- time correlation function.These properties of the correlation function cause grave degradation of the signal processing gain of noise ranging sonar system.The fluctuating and the distortion of conrrelation function made it difficult to realize the noise ranging.So in this paper, a method of space correlation ranging by a linear array of four points with short separation and long span and a technigue of dual- correlation signal processing are presented. By this, the influences of previously mentioned factors are greatly overcomed.Futhermore, for the long period and great delay fluctuation of the dual- correlation function output caused by internal wave, a method of limited memory Quasi- Kalman filtering is developed and the effective accurate ranging and tracing of noise ranging sonar are able to be tralized finally.

Network Sorting Algorithm of Multi-Frequency Signal with Adaptive SNR

An signal noise ratio（ SNR） adaptive sorting algorithm using the time-frequency（ TF）sparsity of frequency-hopping（ FH） signal is proposed in this paper. Firstly,the Gabor transformation is used as TF transformation in the system and a sorting model is established under undetermined condition; then the SNR adaptive pivot threshold setting method is used to find the TF single source. The mixed matrix is estimated according to the TF matrix of single source. Lastly,signal sorting is realized through improved subspace projection combined with relative power deviation of source. Theoretical analysis and simulation results showthat this algorithm has good effectiveness and performance.

Novel Affine Power Flow Method for Improving Accuracy of Interval Power Flow Data in Cyber Physical Systems of Active Distribution Networks

A large number of load power and power output of distributed generation in an active distribution network(ADN)are uncertain,which causes the classical affine power flow method to encounter problems of interval expansion and low efficiency when applied to an AND.This then leads to errors of interval power flow data sources in the cyber physical system(CPS)of an ADN.In order to improve the accuracy of interval power flow data in the CPS of an ADN,an affine power flow method of an ADN for restraining interval expansion is proposed.Aiming at the expansion of interval results caused by the approximation error of non-affine operations in an affine power flow method,the approximation method of the new noise source coefficient is improved,and it is proved that the improved method is superior to the classical method in restraining interval expansion.To overcome the decrease of computational efficiency caused by new noise sources,a novel merging method of new noise sources in an iterative process is designed.Simulation tests are conducted on an IEEE 33-bus,PG&E 69-bus and an actual 1180-bus system,which proves the validity of the proposed affine power flow method and its advantages in terms of computational efficiency and restraining interval expansion.