GN-g-MAH/PPy多功能PET非织造布的制备及应用

为提高聚酯(PET)非织造布的性能,将导电材料通过表面改性引入PET非织造布,采用单宁酸(TA)作为桥联剂,功能化石墨烯(GN-g-MAH)和聚吡咯(PPy)作为导电功能层,制备得到多功能PET非织造布,并使用SEM、XRD、TG等测试了PET/GN-g-MAH/PPy的微观结构和热稳定性。结果表明:通过循环自组装法及低温化学聚合法成功制备了PET/GN-g-MAH/PPy非织造布,表现出良好的导电性,表面电阻率低至3.11×10^(-2)Ω·m,表面由疏水转变为亲水。基于此,非织造布也表现出优异的电热性能,对其施加3 V驱动电压时,可在20s内产生约40℃的饱和温度。此外,还具有良好的光热转换性能,当光照强度为300 mW/cm^(2)时,照射20 s后,表面温度可稳定到105.8℃,非织造布还表现出优异的光热抗菌性,当大肠杆菌的菌液浓度为1.6×10^(8)CFU/mL时,使用氙灯模拟太阳光源照射后,抗菌率达到99.6%。

“无机粒子-无纺布”协同改性碳纤维复合材料及其增韧机理

针对碳纤维复合材料层间性能较差、易发生分层损伤的问题,提出一种采用SiC粒子和热塑性共聚酰胺(PA)无纺布对碳纤维/环氧树脂基复合材料(CFRP)进行增韧改性的技术,在层间构筑一种“无机颗粒/热塑性纤维/树脂基体”多组分多尺度增韧相体系,对比分析改性前后复合材料的Ⅰ型、Ⅱ型层间断裂韧性和耐热性,借助扫描电子显微镜(SEM)和动态热机械分析仪揭示其增韧和耐热性机制。结果表明,与未改性的CFRP材料相比,当SiC填充量(质量分数)为1%、PA无纺布面密度为25 g/m2时,改性CFRP材料Ⅰ型层间断裂韧性(GⅠC)和Ⅱ型层间断裂韧性(GⅡC)分别提高了52.7%和222.6%。无机粒子的阻滞效应、纤维的桥连效应和基体树脂的塑性变形是其主要增韧机制。

Turbulent Flow Action of Pulp in Wet - Laid Non - Woven Processes

The paper deals with the fluid field of web forming in wet-laid non-woven production.The influence of the turbulent flow on blending fiber and occluded fluid produced in pulp flow has been discussed in theory and practice.The suitable use of the imported velocity of pulp is very important in producing wet-laid products of good quality.

VARIATION OF WOVEN FABRIC GEOMETRY——Non-uniform Flattening of Yarns

In previous research much effort has been devoted to the geometry of woven fabrics and relat-ed problems under the assumption of constant yarn configuration in fabric.This paper will first re-port that image crimp (yarn crimp measured by an image analysis method) seems larger than actualvalue.From the explanation of this result,the variation of yarn configuration in woven fabric dueto the non-uniform flattening is revealed.The significance of this actual structure of woven fabricsis discussed.It is believed that the variation of yarn configuration is very important for fabric per-formance,and may be an advantage for fabric quality.

TiO₂PC500 Coated on Non Woven Paper with SiO₂as a Binder-Assisted Photocatalytic Degradation of Reactive Black 5 in Aqueous Solution

Photocatalytic discoloration kinetics of Reactive Black 5 (RB5), a vinylsulfone dye, has been studied spectrophotometrically by following the decrease in dye concentration with time at ambient conditions using a flow loop reactor. UV lump, Black Light Blue (BLB) emitting at maximum wavelength of 365 nm and Ahlstrom Research Service paper consistent of TiO2 P500 coated on non woven paper was used respectively as source of UV light and photocatalyst. At natural pH, the result shows that photolysis of RB5 and its adsorption in the presence of photocatalyst was negligible while the photocatalytic oxidation (PCO) permits 30.8% of RB5 degradation. The degradation of dye was studied under a variety of conditions such as volumetric flow rate, initial pH, photocatalyst reuse, and in the presence of electron acceptor such as sodium persulphate ((Na)2S2O8). The degradation rates were found to be strongly influenced by all the above parameters. The circulation flow rate of 108 L/h was the best. The rate constant calculated when the initial pH was varied shows that pH 3 was more favorable for RB5 removal. Peroxydisulphate ions have the strong effect on RB5 discoloration even in dark without and with photocatalyst. When UV light was used in the presence of photocatalyst, 50 min was enough for quasi-total removal of RB5 with (0.2 M).

Comparative Study of Polypropylene Non-Woven Surgical Mask and Locally Manufactured Woven and Knitted Fabrics Facial Masks

The outbreak of coronavirus has led to an increase in the demand for facemasks globally. Unavailability of appropriate polypropylene non-woven fabrics face masks as a result of inadequate supply to satisfy the growing population has brought about the manufacturing of locally fabrics masks to augment or substitute standard medical class facemasks. The study aims at analyzing airflow of these locally manufactured fabrics to determine possible means of transmitting the virus as well as establish comfort of the user of these masks. Standard polypropylene non-woven, woven and knitted fabrics were considered for the study. Air permeability test was conducted on these fabrics using Frazier Air permeability tester. Depending on the property significant variation in the textile fabrics, polypropylene non-woven is widely accepted for facial masks. Nevertheless, this study illustrates that woven and knitted fabrics have more open structures, which allow a high rate of air penetration and so may require two or three layers to prevent antimicrobial or antiviral potential.

High Oil-absorptive Composites Prepared from Non-woven Fiber and Sponges with 4-tert- butylstyrene-EPDM-divinylbenzene Graft Polymer

4-tert-butylstyrene-EPDM-divinylbenzene graft terpolymer (PBED) was prepared by graft cross-polymerization in toluene using BPO as an initiator. The gel-PBED and solPBED were isolated from extraction of tetrahydrofuran (THF), and then they were identified by IR spectroscopy. The maximum oil-absorptivity of gel-PBED produced from the optinum reaction conditions was 8 420% but its swelling rate was very low. The highest oil-absorptivity of photocrosslinked sol-PBED film was 5 800%. Although its oil absorbency was not as high as gel-PBED' s, swelling rate was higher than that of gelPBED and was suitable for commercial purpose. After swelling in oil, neither gel PBED nor photocrosslinked sol-PBED film having high oil-absorptivity had sufficient mechanical strength to be taken out of oil wholly. As is known, composite technique is one of the useful methods for reinforcing them. Fibers, sponges and non-woven cloths were used as reinforcers or supporters in this work. Oil-absorptivities and swelling kinetics were evaluated by method ASTM (F726 - 81 ) and an experimental equation. The mechanical properties and the morphologies of some composites were measured by tensile tester and SEM , respectively.

A STUDY OF THE SPECIMEN SIZE OF STRIP TENSILE TEST FOR NEEDLE-PUNCHED NON-WOVEN GEOTEXTILES

In this paper,the failure features of strip tensile specimen were observed and analysed for need-le-punched non-woven geotextiles.A mechanical model which expresses the relation between thetensile modulus,the strip specimen size,contraction factor and the tensile strength of non-wovenfabric was derived.The theoretical prediction showed that the main factor influencing tensilestrength of non-woven geotextile specimens with different size is the contraction factor of specimenor the specimen aspect ratio(width/length).The larger the aspect ratio,the higher the tensilestrength test value of geotextiles,but the experiments showed that the specimen tensile strength isnot increased with increasing the width of specimen.The reason was discussed and it seemed thatthe deviation could be served as an indication of the degree of imperfectness of the non-wovenstructure.

Preparation of UV-curable Nano-silver Antimicrobial Agent and Its Application in Non-woven Fabric

Nano-silver and waterborne polyurethane(WPU)composite emulsion was synthesized.The average diameter of silver nanoparticles(SNPs)was about 20 nm,and the average diameter of WPU was 101.32 nm.The anti-bacteria finishing of a polypropylene non-woven fabric(NWF)was carried out by ultraviolet finishing technology and the double dipping twin-roll method.The standard AATCC100 was used to test the antimicrobial activity of the samples.The results showed that the antimicrobial rates of Klebsiella pneumoniae(K.pneumoniae)and Staphylococcus aureus(S.aureus)were above 90%,which indicated that the NWF finishing had good antimicrobial activity.In addition,the thermal stability,mechanical properties,whiteness and contact angle of antimicrobial finishing nonwovens were characterized.The results showed that the performance of antimicrobial nonwovens was stable at 300℃.The breaking strength was better than that of untreated nonwovens,and the contact angle reached 119.1°.

Modelling the Influence of Air Jet Configurations on Non-Woven Steel Fibre Mixing in the Melt Overflow Process

The mixing of non-woven steel fibres in melt overflow process for use in automotive muffler systems was simulated. The aim was to identify optimum parameters for achieving a good fibre mix. Numerical models of mixing chambers of melt overflow process were developed. Multiphysics analyses involving heat transfer, fluid flow and particle tracking were carried out using COMSOL code. The influence of air jet configurations on the fibre distribution was studied. The fibres settled on the moving bed within the mixing chamber were examined for their uniformity. The effect of additional air jets to the existing chamber in a range of regions was explored. An optimum configuration was identified by analyzing the compactness of the particle clusters deposited in the simulation and validated using pixel data acquired from real time imaging. The results showed that by employing dual air jets at the front end of the chamber, the density of the fibre material has improved. We conclude that through multi-physics modelling, it was possible to identify the optimum air-jet configurations leading to fibre uniformity and its distribution. This work also paves the way for incorporating a vision system to evaluate fibre density in real time.

肥胖儿童non-HDL-C、remnant cholesterol与亚临床动脉粥样硬化的关系

目的:了解non-HDL-C和remnant cholesterol与肥胖儿童亚临床动脉粥样硬化(AS)的关系。方法:根据甘油三酯(TG)水平将65例肥胖儿童(肥胖组)分为I组(TG≥2.3 mmol/L)32例,II组(TG<2.3 mmol/L)33例,与肥胖组儿童性别年龄相匹配的正常体质量儿童30例为III组(对照组)。比较3组儿童血脂指标,对肥胖组各项血脂指标与血浆致动脉粥样硬化指数(AIP)进行相关性分析,肥胖患儿体质指数、血脂指标与颈动脉内径、内膜-中层厚度(c-IMT)、血流参数进行相关性分析。结果:I组、II组的TG、总胆固醇(TC)、低密度脂蛋白胆固醇(LDL-C)、non-HDL-C、remnant cholesterol、AIP均较对照组升高,高密度脂蛋白胆固醇(HDL-C)较对照组降低,且I组的remnant cholesterol、AIP均较II组升高。肥胖组儿童AIP与TG、non-HDL-C、remnant cholesterol呈正相关,与HDL-C呈负相关。37例行颈动脉超声检查的肥胖儿童的c-IMT较正常儿童的增厚。结论:non-HDL-C、remnant cholesterol在肥胖儿童亚临床AS中有重要作用,在肥胖儿童血脂异常的治疗中应关注non-HDL-C、remnant cholesterol的变化。

Analysis of Numerical Results in High Temperature Congealment and Chemistry Non-equilibrium Flow Field

Using the air plasma ignition technique, physicochemical process of burning can be accelerated; concentration limit ofretrofires both can be extended; reliability of retrofires and stability of burning can be improved. In this paper, using internalequivalent heat area in place of electric are that created Ohm heat, the flow fields of thermodynamic equilibrium chemistry con-gealment and chemistry non-equilibrium in the plasma generator were simulated. The influences of the inlet prerotation angleof air, the inlet total pressure of air and the airflow compression angle of spray nozzle on the temperature on the surface of elec-

预辐射接枝包埋法制备NWF-g-DMC@Al_(2)O_(3)吸附剂及其对亚氯酸盐的去除

亚氯酸盐等消毒副产物,已经被国际癌症研究中心列为致癌物,对其进行有效的处理,成为饮用水净化过程中的当务之急。本文以水为溶剂,通过预辐射接枝包埋反应,成功合成了系列无纺布-甲基丙烯酸乙酯基三甲基氯化铵-纳米三氧化二铝(NWF-g-DMC@Al_(2)O_(3))吸附材料,并系统探讨了吸收剂量、单体浓度等多种因素对增重率的影响,进而探讨不同增重率、包埋率、溶液pH对吸附率的影响,获得了完整的静态吸附平衡曲线。利用红外光谱仪(IR)、扫描电镜(SEM)、热重分析仪(TG)、X射线衍射仪(XRD)、水质分析仪等表征手段对该制得的样品的结构与吸附性能等进行表征与测试。结果表明:单体浓度为40%时,增重率最大。吸收剂量为100 kGy、包埋量为4%、pH为2、初始浓度为10 mg/L时的吸附率最高,NWF-g-DMC@Al_(2)O_(3)吸附剂对消毒剂副产物亚氯酸盐的脱除率高达89%。该吸附剂有望在饮用水、工业用水领域得到广泛的应用。

On the Representation of Multi-layer Woven Structure

A quantitative method is developed to identify the structures of multi-layer woven fabric in this study. Six structural parameters are selected to represent the fabric structure. With some design criteria for the reinforcement of textile composites, the relationships among the structural parameters are derived for different binding patterns of the fabric structure. The conditions, which meet the requirements of structural cell stability,are also discussed.

MiR-16-5p plays an inhibitory role in human non-small cell lung cancer through Fermitin family member 2

Increasing evidence indicates that aberrant expressions of some microRNAs are associated with cancer progression.However,the roles and biological mechanisms of miRNA-16-5p in human non-small cell lung cancer(NSCLC)are not to be well studied.Here,we validated that the expression of miR-16-5p was decreased significantly in NSCLC samples and cell lines.The correlation between the clinicopathological features of NSCLC and the miR-16-5p expression showed that the expression of miR-16-5p in non-small cell lung cancer was linked with the advanced TNM stage,positive lymph node metastasis,with short overall survival(OS).Also,a negative correlation between miR-16-5p and Fermitin family member 2(FERMT2)was observed,implying there may be a potential link about their regulation.The hypothesis was further confirmed by in-silico analysis and dual-luciferase reporter assay.Moreover,we demonstrated that the transfections of miR-16-5p mimics could alter some biological characteristics of NSCLC cells remarkably accomplished by the expression variance of FERMT2 in vitro and in vivo assays.Summarily,this study demonstrated that miR-16-5p,as a tumor suppression factor in NSCLC by targeting FERMT2,could serve as one promising biomarker in the prediction for NSCLC patients.

Relationships between the Processing Parameters of Melt Blown Nonwoven Fabric and Its Structure and Filtration Property

Based on the processing experiment and sodium flame test this paper deals with the relationship between processing parameters, structure, and filtration property of melt blown fabric. Through the image analysis of Questar micro-images in combination with the SEM observation and the measurement of some macrostructure indices, the relationship between the processing parameters and the structure especially the microstructure is emphasized Finally the effect of somestructure factors on filtration properties is discussed theoretically.

多色无纺布包装材料在手术器械灭菌管理中的应用效果

目的:分析多色无纺布包装材料在手术器械灭菌管理对手术周转效率、手术器械准备情况及外科医护人员与患者满意度等影响。方法:选取2016年3月至2021年12月首都医科大学附属北京友谊医院消毒供应中心的31589件手术器械,根据管理方法不同,将2016年3月至2019年1月的71007例手术患者及患者使用的16224件手术器械纳入对照组,采用传统的纱棉布包包装手术器械管理方法。将2019年2月至2021年12月的62548例手术患者及患者使用的15365件手术器械纳入观察组,采用多色无纺布包装材料手术器械管理方法,比较两组手术周转效率、手术器械准备情况及患者与外科医护人员的使用管理满意度。结果:观察组患者手术的入室时间、入室-切皮时间、接台手术入室-切皮时间及手术延误率均低于对照组,差异有统计学意义(t=52.681、37.167、72.524,χ^(2)=9.605,P<0.05)。与对照组比较,观察组外出送物品次数、装配错误和器械丢失明显降低,器械完好件数明显提高,差异有统计学意义(χ^(2)=107.345、11.782、8.727、66.223,P<0.05);观察组患者及医护人员器械使用管理的满意度显著高于对照组,差异有统计学意义(t=100.723、6.756,P<0.05)。结论:手术器械运用多色无纺布包装材料有助于提高手术周转率,通过降低外出送物品次数、装配错误及器械丢失提高消毒供应中心工作效率,改善外科医护人员与患者对手术器械多色无纺布包装材料的满意度。

空气净化技术研究(1):纤维过滤

纤维过滤是目前使用最广泛的空气净化技术,主要滤材有无纺布、玻璃纤维、驻极体静电纤维、聚四氟乙烯(PTFE)膜和纳米纤维。本文比较了国内外主要空气过滤器标准中的效率规格,介绍了这5种纤维过滤器的特点,分析了国内外文献报道的这些过滤器的主要性能和优缺点。对3种空气过滤器,即用驻极体静电纤维、PTFE纤维和静电纺丝纳米纤维制造的空气过滤器进行了测试,其中静电纺丝纳米纤维和PTFE纤维空气过滤器虽然仍存在不足,但是已实现了高效低阻的目标。面对全球肆虐不断的各种流行性疾病,空气过滤器不但需要实现高效率、低阻力,更应具备杀灭细菌和灭活病毒的功能,新的、性能更优的纤维过滤材料和空气过滤器有待开发和应用。

黄麻可降解阻燃型非织造材料的制备及性能

探讨黄麻可降解阻燃汽车内饰材料的制备工艺。采用针刺工艺和热压工艺制备了阻燃型黄麻/粘胶/PBAT/CMC可降解非织造材料,对非织造材料进行垂直燃烧测试、力学性能测试和扫描电镜测试。试验分析得出合适的阻燃剂及用量,探究了材料的面密度、热压条件对阻燃型非织造材料力学性能的影响,并通过正交试验得到热压成型的最优工艺参数。结果表明:阻燃剂低聚磷酸铵(APP)阻燃效果基本不受热压条件影响,其用量为黄麻、粘胶、黏结剂总质量的20%时,材料阻燃等级达到V-0级别;且样品组分为黄麻/粘胶/PBAT/CMC 40/40/15/5、APP质量分数12%、面密度约170.0 g/m^(2),热压条件为热压温度150℃、压强6 MPa、热压时间5 s时,得到的样品断裂强力219.2 N,断裂伸长率2.4%。