Kaempferia parviflora, a plant in the family Zingiberaceae, has been used in Thai traditional medicines for treating hypertension and promoting longevity with good health and wellbeing. However, its limited aqueous so...Kaempferia parviflora, a plant in the family Zingiberaceae, has been used in Thai traditional medicines for treating hypertension and promoting longevity with good health and wellbeing. However, its limited aqueous solubility and low dissolution restrict its bioavailability.The aim of the study was therefore to improve the dissolution rate of K. parviflora extracted with dichloromethane(KPD) by solid dispersions. Different water-soluble polymers were applied to improve dissolution of KPD. The solid dispersions in different ratios were prepared by solvent evaporation method. Only hydroxypropyl methylcellulose(HPMC) and polyvinyl alcohol-polyethylene glycol grafted copolymer(PVA-co-PEG) could be used to produce homogeneous, powdered solid dispersions. Physical characterization by scanning electron microscopy, hot stage microscopy, differential scanning calorimetry and powder X-ray diffractometry, in comparison with corresponding physical mixtures, showed the changes in solid state during the formation of solid dispersions. Dissolution of a selected marker,5,7,4′-trimethoxyflavone(TMF), from KPD/HPMC and KPD/PVA-co-PEG solid dispersions was significantly improved, compared with pure KPD. The dissolution enhancement by solid dispersion was influenced by both type and content of polymers. The stability of KPD/HPMC and KPD/PVA-co-PEG solid dispersions was also good after 6-month storage in both longterm and accelerated conditions. These results identified that the KPD/HPMC and KPD/PVAco-PEG solid dispersions were an effective new approach for pharmaceutical application of K. parviflora.展开更多
This paper reports an efficient method of preparing porous polymeric microspheres by solvent evaporation in foam phase,in which phase separation between polymer and porogen occurs in foam phase instead of that in wate...This paper reports an efficient method of preparing porous polymeric microspheres by solvent evaporation in foam phase,in which phase separation between polymer and porogen occurs in foam phase instead of that in water phase by using the traditional solvent eva poration method.The method provides outstanding features,including being time-saving,of high-yield and able for continuous production,in which formation of porous polymeric microspheres finished within 3 min with a high production yield up to approximate 95 wt% and the process was able to be developed into a continuous process for production of porous polymeric microspheres.It was also universal to non-crosslinked polymers since the method is a development on the traditional emulsion solvent evaporation method.The new method is efficient and can be used potentially on the industrial scale for continuous production of porous polymeric microsphere s.展开更多
Standard free energies (ΔG0t(i) ) and entropies (ΔS0t(i)) of transfer of some homologous α-amino acids viz. glycine (gly), dl-alanine (ala), dl-α-amino butyric acid (aba) and dl-nor-valine (nor-val) from protic et...Standard free energies (ΔG0t(i) ) and entropies (ΔS0t(i)) of transfer of some homologous α-amino acids viz. glycine (gly), dl-alanine (ala), dl-α-amino butyric acid (aba) and dl-nor-valine (nor-val) from protic ethylene glycol (EG) to dipolar aprotic N,N-dimethyl formamide (DMF) have been evaluated from solubility measure-ments at five equidistant temperatures i.e from 15 to 350C. The observed ΔG0t(i) and TΔS0t(i) Vs composition profiles are complicated because of the various interaction effects. The chemical effects of the transfer Gibbs energies (ΔG0t.ch(i)) and entropies of transfer (ΔS0t.ch(i)) have been obtained after elimination of cavity effect, estimated by the scaled particle theory and dipole-dipole interaction effects, estimated by the use of Keesom-orientation expression. The chemical contributions of transfer energetics of homologous α-amino acids are guided by the composite effects of increased dispersion interaction, basicity and decreased acidity, hydrogen bonding effects and solvophobic solvation of ethylene glycol and N, N-dimethyl formamide mixed solvent as compared to that of reference solvent (ethylene glycol).展开更多
Ni-rich layered oxides in lithium-ion batteries have problems with gas generation and electrochemical performance reduction due to residual lithium's reaction on the surface with the electrolyte.To address this is...Ni-rich layered oxides in lithium-ion batteries have problems with gas generation and electrochemical performance reduction due to residual lithium's reaction on the surface with the electrolyte.To address this issue,in this study,the Acid solvent evaporation(AsE)method has been proposed as a potential method to remove residual lithium while promoting the formation of a new LiNO_(3)-derived coating layer on the cathode surface.The reduction of residual lithium using the ASE method and the construction of a LiNO_(3)-derived coating layer suppresses gas evolution caused by the side effects of the electrolyte,improves electrochemical performance,and improves thermal stability by facilitating the smooth movement of lithium ions.Furthermore,the structural stability and resistance change due to the LiNO_(3)-derived coating layer effects is guaranteed through cycling and DCIR of the pouch cell.As a result,compared to Pristine,the capacity retention of coin cells increased by 8%after 100 cycles,and pouch cells increased by 25%after 160 cycles.In addition,after cycling the pouch cell,CO_(2) gas has significantly reduced by about 30%compared to Pristine using gas chromatography.The ASE method effectively forms a robust LiNO_(3)-derived coating layer on the cathode active material,which helps minimize electrolyte reactivity,suppress ,CO_(2) emissions,enhance surface structure stability,improve thermal stability,and improveoverallbatteryperformance.展开更多
[Objectives]To prepare 20(S)-protopanaxadiol PLGA nanoparticles(20(S)-PPD-PLGA-NPs).[Methods]20(S)-PPD-PLGA-NPs were prepared by emulsion solvent evaporation method,and the optimal formulation was screened by Box-Behn...[Objectives]To prepare 20(S)-protopanaxadiol PLGA nanoparticles(20(S)-PPD-PLGA-NPs).[Methods]20(S)-PPD-PLGA-NPs were prepared by emulsion solvent evaporation method,and the optimal formulation was screened by Box-Behnken experiment with particle size and drug loading as the indicators through single factor experiment,and the drug release in vitro was carried out.[Results]The average diameter of the nanoparticles was(119.60±2.29)nm and the polydispersity index was(0.12±0.02),the size was uniform.The encapsulation efficiency and drug loading of protopanaxadiol were(87.99±1.29)%and(14.86±0.25)%,respectively.[Conclusions]The 20(S)-PPD-PLGA-NPs were successfully prepared by emulsion solvent evaporation method,and the 20(S)-PPD-PLGA-NPs had good stability,to lay a foundation for the study of 20(S)-PPD-PLGA-NPs in vitro and in vivo.展开更多
文摘Kaempferia parviflora, a plant in the family Zingiberaceae, has been used in Thai traditional medicines for treating hypertension and promoting longevity with good health and wellbeing. However, its limited aqueous solubility and low dissolution restrict its bioavailability.The aim of the study was therefore to improve the dissolution rate of K. parviflora extracted with dichloromethane(KPD) by solid dispersions. Different water-soluble polymers were applied to improve dissolution of KPD. The solid dispersions in different ratios were prepared by solvent evaporation method. Only hydroxypropyl methylcellulose(HPMC) and polyvinyl alcohol-polyethylene glycol grafted copolymer(PVA-co-PEG) could be used to produce homogeneous, powdered solid dispersions. Physical characterization by scanning electron microscopy, hot stage microscopy, differential scanning calorimetry and powder X-ray diffractometry, in comparison with corresponding physical mixtures, showed the changes in solid state during the formation of solid dispersions. Dissolution of a selected marker,5,7,4′-trimethoxyflavone(TMF), from KPD/HPMC and KPD/PVA-co-PEG solid dispersions was significantly improved, compared with pure KPD. The dissolution enhancement by solid dispersion was influenced by both type and content of polymers. The stability of KPD/HPMC and KPD/PVA-co-PEG solid dispersions was also good after 6-month storage in both longterm and accelerated conditions. These results identified that the KPD/HPMC and KPD/PVAco-PEG solid dispersions were an effective new approach for pharmaceutical application of K. parviflora.
基金financially supported by National Natural Science Foundation of China (22068018, 21466016 and 51863011)Natural Science Foundation of Yunnan Province (2016FB024)Yunnan Ten Thousand Talents Plan Young & Elite Talents Project。
文摘This paper reports an efficient method of preparing porous polymeric microspheres by solvent evaporation in foam phase,in which phase separation between polymer and porogen occurs in foam phase instead of that in water phase by using the traditional solvent eva poration method.The method provides outstanding features,including being time-saving,of high-yield and able for continuous production,in which formation of porous polymeric microspheres finished within 3 min with a high production yield up to approximate 95 wt% and the process was able to be developed into a continuous process for production of porous polymeric microspheres.It was also universal to non-crosslinked polymers since the method is a development on the traditional emulsion solvent evaporation method.The new method is efficient and can be used potentially on the industrial scale for continuous production of porous polymeric microsphere s.
文摘Standard free energies (ΔG0t(i) ) and entropies (ΔS0t(i)) of transfer of some homologous α-amino acids viz. glycine (gly), dl-alanine (ala), dl-α-amino butyric acid (aba) and dl-nor-valine (nor-val) from protic ethylene glycol (EG) to dipolar aprotic N,N-dimethyl formamide (DMF) have been evaluated from solubility measure-ments at five equidistant temperatures i.e from 15 to 350C. The observed ΔG0t(i) and TΔS0t(i) Vs composition profiles are complicated because of the various interaction effects. The chemical effects of the transfer Gibbs energies (ΔG0t.ch(i)) and entropies of transfer (ΔS0t.ch(i)) have been obtained after elimination of cavity effect, estimated by the scaled particle theory and dipole-dipole interaction effects, estimated by the use of Keesom-orientation expression. The chemical contributions of transfer energetics of homologous α-amino acids are guided by the composite effects of increased dispersion interaction, basicity and decreased acidity, hydrogen bonding effects and solvophobic solvation of ethylene glycol and N, N-dimethyl formamide mixed solvent as compared to that of reference solvent (ethylene glycol).
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIP)(2021R1F1A1055946)SolarEdge Technologies Korea(GCU-202203070002)。
文摘Ni-rich layered oxides in lithium-ion batteries have problems with gas generation and electrochemical performance reduction due to residual lithium's reaction on the surface with the electrolyte.To address this issue,in this study,the Acid solvent evaporation(AsE)method has been proposed as a potential method to remove residual lithium while promoting the formation of a new LiNO_(3)-derived coating layer on the cathode surface.The reduction of residual lithium using the ASE method and the construction of a LiNO_(3)-derived coating layer suppresses gas evolution caused by the side effects of the electrolyte,improves electrochemical performance,and improves thermal stability by facilitating the smooth movement of lithium ions.Furthermore,the structural stability and resistance change due to the LiNO_(3)-derived coating layer effects is guaranteed through cycling and DCIR of the pouch cell.As a result,compared to Pristine,the capacity retention of coin cells increased by 8%after 100 cycles,and pouch cells increased by 25%after 160 cycles.In addition,after cycling the pouch cell,CO_(2) gas has significantly reduced by about 30%compared to Pristine using gas chromatography.The ASE method effectively forms a robust LiNO_(3)-derived coating layer on the cathode active material,which helps minimize electrolyte reactivity,suppress ,CO_(2) emissions,enhance surface structure stability,improve thermal stability,and improveoverallbatteryperformance.
文摘[Objectives]To prepare 20(S)-protopanaxadiol PLGA nanoparticles(20(S)-PPD-PLGA-NPs).[Methods]20(S)-PPD-PLGA-NPs were prepared by emulsion solvent evaporation method,and the optimal formulation was screened by Box-Behnken experiment with particle size and drug loading as the indicators through single factor experiment,and the drug release in vitro was carried out.[Results]The average diameter of the nanoparticles was(119.60±2.29)nm and the polydispersity index was(0.12±0.02),the size was uniform.The encapsulation efficiency and drug loading of protopanaxadiol were(87.99±1.29)%and(14.86±0.25)%,respectively.[Conclusions]The 20(S)-PPD-PLGA-NPs were successfully prepared by emulsion solvent evaporation method,and the 20(S)-PPD-PLGA-NPs had good stability,to lay a foundation for the study of 20(S)-PPD-PLGA-NPs in vitro and in vivo.
