A Non-Intrusive Stochastic Phase-Field for Fatigue Fracture in Brittle Materials with Uncertainty in Geometry and Material Properties

Understanding the probabilistic nature of brittle materials due to inherent dispersions in their mechanical properties is important to assess their reliability and safety for sensitive engineering applications.This is all the more important when elements composed of brittle materials are exposed to dynamic environments,resulting in catastrophic fatigue failures.The authors propose the application of a non-intrusive polynomial chaos expansion method for probabilistic studies on brittle materials undergoing fatigue fracture when geometrical parameters and material properties are random independent variables.Understanding the probabilistic nature of fatigue fracture in brittle materials is crucial for ensuring the reliability and safety of engineering structures subjected to cyclic loading.Crack growth is modelled using a phase-field approach within a finite element framework.For modelling fatigue,fracture resistance is progressively degraded by modifying the regularised free energy functional using a fatigue degradation function.Number of cycles to failure is treated as the dependent variable of interest and is estimated within acceptable limits due to the randomness in independent properties.Multiple 2D benchmark problems are solved to demonstrate the ability of this approach to predict the dependent variable responses with significantly fewer simulations than the Monte Carlo method.This proposed approach can accurately predict results typically obtained through 105 or more runs in Monte Carlo simulations with a reduction of up to three orders of magnitude in required runs.The independent random variables’sensitivity to the system response is determined using Sobol’indices.The proposed approach has low computational overhead and can be useful for computationally intensive problems requiring rapid decision-making in sensitive applications like aerospace,nuclear and biomedical engineering.The technique does not require reformulating existing finite element code and can perform the stochastic study by direct pre/post-processing.

Uncertainty Quantification of Numerical Simulation of Flows around a Cylinder Using Non-intrusive Polynomial Chaos

The uncertainty quantification of flows around a cylinder is studied by the non-intrusive polynomial chaos method. Based on the validation with benchmark results, discussions are mainly focused on the statistic properties of the peak lift and drag coefficients and base pressure drop over the cylinder with the uncertainties of viscosity coefficient and inflow boundary velocity. As for the numerical results of flows around a cylinder, influence of the inflow boundary velocity uncertainty is larger than that of viscosity. The results indeed demonstrate that a five-order degree of polynomial chaos expansion is enough to represent the solution of flow in this study.

Non-intrusive hybrid interval method for uncertain nonlinear systems using derivative information

This paper proposes a new non-intrusive hybrid interval method using derivative information for the dynamic response analysis of nonlinear systems with uncertain-but- bounded parameters and/or initial conditions. This method provides tighter solution ranges compared to the existing polynomial approximation interval methods. Interval arith- metic using the Chebyshev basis and interval arithmetic using the general form modified affine basis for polynomials are developed to obtain tighter bounds for interval computation. To further reduce the overestimation caused by the ＂wrap- ping effect＂ of interval arithmetic, the derivative information of dynamic responses is used to achieve exact solutions when the dynamic responses are monotonic with respect to all the uncertain variables. Finally, two typical numerical examples with nonlinearity are applied to demonstrate the effective- ness of the proposed hybrid interval method, in particular, its ability to effectively control the overestimation for specific timepoints.

Non-Intrusive Load Identification Model Based on 3D Spatial Feature and Convolutional Neural Network

Load identification method is one of the major technical difficulties of non-intrusive composite monitoring. Binary V-I trajectory image can reflect the original V-I trajectory characteristics to a large extent, so it is widely used in load identification. However, using single binary V-I trajectory feature for load identification has certain limitations. In order to improve the accuracy of load identification, the power feature is added on the basis of the binary V-I trajectory feature in this paper. We change the initial binary V-I trajectory into a new 3D feature by mapping the power feature to the third dimension. In order to reduce the impact of imbalance samples on load identification, the SVM SMOTE algorithm is used to balance the samples. Based on the deep learning method, the convolutional neural network model is used to extract the newly produced 3D feature to achieve load identification in this paper. The results indicate the new 3D feature has better observability and the proposed model has higher identification performance compared with other classification models on the public data set PLAID.

Non-intrusive modeling for integrated energy system based on two-stage GAN

Generally,an accurate model can describe the operating states of a system more effectively and provide a more reliable theoretical basis for the system optimization and control.Different from the traditional intrusive modeling,a non-intrusive modeling method based on two-stage generative adversarial network(TS-GAN)is proposed for integrated energy system(IES).By using this method,non-intrusive modeling for the IES including photovoltaic,wind power,energy storage,and energy coupling equipment can be carried out.First,the characteristics of IES are analyzed and extracted based on the meteorological data,energy output,and energy price,and then the characteristic database is established.Meanwhile,the loads are classified as uncontrollable loads and schedulable loads based on frequency domain decomposition to facilitate energy management.Furthermore,TS-GAN algorithm based on the Stackelberg game is designed.In the TS-GAN,the first-stage GAN is used to generate the operating data of each equipment identified by non-invasive monitoring,and the second-stage GAN distinguishes the accumulated data generated by first-stage GAN and further modifies the generator models of the first-stage GAN.Finally,the effectiveness and accuracy of the proposed method are verified by the simulation of an energy region.

Non-intrusive temperature rise fault-identification of distribution cabinet based on tensor block-matching

In this study,a novel non-intrusive temperature rise fault-identification method for a distribution cabinet based on tensor block-matching is proposed.Two-stage data repair is used to reconstruct the temperature-field information to support the demand for temperature rise fault-identification of non-intrusive distribution cabinets.In the coarse-repair stage,this method is based on the outside temperature information of the distribution cabinet,using tensor block-matching technology to search for an appropriate tensor block in the temperature-field tensor dictionary,filling the target space area from the outside to the inside,and realizing the reconstruction of the three-dimensional temperature field inside the distribution cabinet.In the fine-repair stage,tensor super-resolution technology is used to fill the temperature field obtained from coarse repair to realize the smoothing of the temperature-field information inside the distribution cabinet.Non-intrusive temperature rise fault-identification is realized by setting clustering rules and temperature thresholds to compare the location of the heat source with the location of the distribution cabinet components.The simulation results show that the temperature-field reconstruction error is reduced by 82.42%compared with the traditional technology,and the temperature rise fault-identification accuracy is greater than 86%,verifying the feasibility and effectiveness of the temperature-field reconstruction and temperature rise fault-identification.

Event-Driven Non-Intrusive Load Monitoring Algorithm Based on Targeted Mining Multidimensional Load Characteristics

Nowadays,the advancement of nonintrusive load monitoring(NILM)has been hastened by the ever-increasing requirements for the reasonable use of electricity by users and demand side management.Although existing researches have tried their best to extract a wide variety of load features based on transient or steady state of electrical appliances,it is still very difficult for their algorithm to model the load decomposition problem of different electrical appliance types in a targeted manner to jointly mine their proposed features.This paper presents a very effective event-driven NILM solution,which aims to separately model different appliance types to mine the unique characteristics of appliances from multi-dimensional features,so that all electrical appliances can achieve the best classification performance.First,we convert the multi-classification problem into a serial multiple binary classification problem through a pre-sort model to simplify the original problem.Then,ConTrastive Loss K-Nearest Neighbour(CTLKNN)model with trainable weights is proposed to targeted mine appliance load characteristics.The simulation results show the effectiveness and stability of the proposed algorithm.Compared with existing algorithms,the proposed algorithm has improved the identification performance of all electrical appliance types.

Non-Intrusive Objective Speech Quality Measurement Based on Fuzzy GMM and SVR for Narrowband Speech

Based on fuzzy Gaussian mixture model （FGMM） and support vector regression （SVR）,an improved version of non-intrusive objective measurement for assessing quality of output speech without inputting clean speech is proposed for narrowband speech.Its perceptual linear predictive （PLP） features extracted from clean speech and clustered by FGMM are used as an artificial reference model.Input speech is separated into three classes,for each a consistency parameter between each feature pair from test speech signals and its counterpart in the pre-trained FGMM reference model is calculated and mapped to an objective speech quality score using SVR method.The correlation degree between subjective mean opinion score （MOS） and objective MOS is analyzed.Experimental results show that the proposed method offers an effective technique and can give better performances than the ITU-T P.563 method under most of the test conditions for narrowband speech.

Performance and Challenges in Utilizing Non-Intrusive Sensors for Traffic Data Collection

Extensive field tests of non-intrusive sensors for traffic volume, speed and classification detection were conducted under a variety of traffic composition and road width conditions. The accuracy challenges of utilizing non-intrusive sensors for traffic data collection were studied. Both fixed and portable sensors with infrared, microwave and image recognition technologies were tested. Most sensors obtained accurate or fairly accurate measurements of volume and speed, but vehicle classification counts were problematic even when classes were reduced to 3 to 5 compared to FHWA’s 13-class standard scheme.

Design, Implementation and Simulation of Non-Intrusive Sensor for On-Line Condition Monitoring of MV Electrical Components

Non-intrusive measurement technology is of great interest for the electrical utilities in order to avoid an interruption in the normal operation of the supply network during diagnostics measurements and inspections. Inductively coupled electromagnetic sensing provides a possibility of non-intrusive measurements for online condition monitoring of the electrical components in a Medium Voltage (MV) distribution network. This is accomplished by employing Partial Discharge (PD) activity monitoring, one of the successful methods to assess the working condition of MV components but often requires specialized equipment for carrying out the measurements. In this paper, Rogowski coil sensor is presented as a robust solution for non-intrusive measurements of PD signals. A high frequency prototype of Rogowski coil is designed in the laboratory. Step-by-step approach of constructing the sensor system is presented and performance of its components (coil head, damping component, integrator and data acquisition system) is evaluated using practical and simulated environments. Alternative Transient Program-Electromagnetic Transient Program (ATP-EMTP) is used to analyze the designed model of the Rogowski coil. Real and simulated models of the coil are used to investigate the behavior of Rogowski coil sensor at its different stages of development from a transducer coil to a complete measuring device. Both models are compared to evaluate their accuracy for PD applications. Due to simple design, flexible hardware, and low cost of Rogowski coil, it can be considered as an efficient current measuring device for integrated monitoring applications where a large number of sensors are required to develop an automated online condition monitoring system for a distribution network.

Partial Discharge Simulations Used for the Design of a Non-Intrusive Cable Condition Monitoring Technique

The purpose of this paper is to investigate the effect of PD （partial discharge） activity within medium voltage XLPE （cross-linked polyethylene） cables. The effect of partial discharge was studied by means of a number of simulations. The simulations were based on the well-known three capacitor model for partial discharge. An equivalent circuit was derived for partial discharge due to a single void in the insulation material of a power cable. The results obtained from the simulations will form the basis of the design proses of a non-intrusive condition monitoring technique. The technique is based on the classification of discharge activity according to five levels of PD. Future work will include the improvement of the simulation model by investigating the high frequency model of a power cable as well as the statistical nature of PD activity. This will improve the accuracy of the simulation results when compared to actual measurements. The work discussed in this paper will be used to construct and calibrate a practical model which will make use of PD measurements for non-intrusive condition monitoring of medium voltage electrical cables.

A novel non-intrusive load monitoring technique using semi-supervised deep learning framework for smart grid

Non-intrusive load monitoring(NILM)is a technique which extracts individual appliance consumption and operation state change information from the aggregate power consumption made by a single residential or commercial unit.NILM plays a pivotal role in modernizing building energy management by disaggregating total energy consumption into individual appliance-level insights.This enables informed decision-making,energy optimization,and cost reduction.However,NILM encounters substantial challenges like signal noise,data availability,and data privacy concerns,necessitating advanced algorithms and robust methodologies to ensure accurate and secure energy disaggregation in real-world scenarios.Deep learning techniques have recently shown some promising results in NILM research,but training these neural networks requires significant labeled data.Obtaining initial sets of labeled data for the research by installing smart meters at the end of consumers’appliances is laborious and expensive and exposes users to severe privacy risks.It is also important to mention that most NILM research uses empirical observations instead of proper mathematical approaches to obtain the threshold value for determining appliance operation states(On/Off)from their respective energy consumption value.This paper proposes a novel semi-supervised multilabel deep learning technique based on temporal convolutional network(TCN)and long short-term memory(LSTM)for classifying appliance operation states from labeled and unlabeled data.The two thresholding techniques,namely Middle-Point Thresholding and Variance-Sensitive Thresholding,which are needed to derive the threshold values for determining appliance operation states,are also compared thoroughly.The superiority of the proposed model,along with finding the appliance states through the Middle-Point Thresholding method,is demonstrated through 15%improved overall improved F1micro score and almost 26%improved Hamming loss,F1 and Specificity score for the performance of individual appliance when compared to the benchmarking techniques that also used semi-supervised learning approach.

Non-intrusive Load Monitoring Based on Graph Total Variation for Residential Appliances

Non-intrusive load monitoring is a technique for monitoring the operating conditions of electrical appliances by collecting the aggregated electrical information at the household power inlet.Despite several studies on the mining of unique load characteristics,few studies have extensively considered the high computational burden and sample training.Based on lowfrequency sampling data,a non-intrusive load monitoring algorithm utilizing the graph total variation(GTV)is proposed in this study.The algorithm can effectively depict the load state without the need for prior training.First,the combined Kmeans clustering algorithm and graph signals are used to build concise and accurate graph structures as load models.The GTV representing the internal structure of the graph signal is introduced as the optimization model and solved using the augmented Lagrangian iterative algorithm.The introduction of the difference operator reduces the computing cost and addresses the inaccurate reconstruction of the graph signal.With low-frequency sampling data,the algorithm only requires a little prior data and no training,thereby reducing the computing cost.Experiments conducted using the reference energy disaggregation dataset and almanac of minutely power dataset demonstrated the stable superiority of the algorithm and its low computational burden.

Reconstructing hourly residential electrical load profiles for Renewable Energy Communities using non-intrusive machine learning techniques

The successful implementation of Renewable Energy Communities(RECs)involves maximizing the self-consumption within a community,particularly in regulatory contexts in which shared energy is incentivized.In many countries,the absence of a metering infrastructure that provides data at an hourly or sub-hourly resolution level for low-voltage users(e.g.,residential and commercial users)makes the design of a new energy community a challenging task.This study proposes a non-intrusive machine learning methodology that can be used to generate residential electrical consumption profiles at an hourly resolution level using only monthly consumption data(i.e.,billed energy),with the aim of estimating the energy shared by RECs.The proposed methodology involves three phases:first,identifying the typical load patterns of residential users through k-Means clustering,then implementing a Random Forest algorithm,based on monthly energy bills,to identify typical load patterns and,finally,reconstructing the hourly electrical load profile through a data-driven rescaling procedure.The effectiveness of the proposed methodology has been evaluated through an REC case study composed by 37 residential users powered by a 70 kWp photovoltaic plant.The Normalized Mean Absolute Error(NMAE)and the Normalized Root Mean Squared Error(NRMSE)were evaluated over an entire year and whenever the energy was shared within the REC.The Relative Absolute Error was also measured when estimating the shared energy at both a monthly(MRAE)and at an annual basis.(RAE).A comparison between the REC load profile reconstructed using the proposed methodology and the real load profile yielded an overall NMAE of 20.04%,an NRMSE of 26.17%,and errors of 18.34%and 23.87%during shared energy timeframes,respectively.Furthermore,our model delivered relative absolute errors for the estimation of the shared energy at a monthly and annual scale of 8.31%and 0.12%,respectively.

Energy Disaggregation of Industrial Machinery Utilizing Artificial Neural Networks for Non-intrusive Load Monitoring

This paper explores the application of non-intrusive load monitoring techniques in the industrial sector for disaggregating the energy consumption of machinery in manufacturing processes. With an increasing focus on energy efficiency and decarbonization measures, achieving energy transparency in production becomes crucial. Utilizing non-intrusive load monitoring, energy data analysis and processing can provide valuable insights for informed decision-making on energy efficiency improvements and emission reductions. While non-intrusive load monitoring has been extensively researched in the building and residential sectors, the application in the industrial manufacturing domain needs to be further explored. This paper addresses this research gap by adapting established non-intrusive load monitoring techniques to an industrial dataset. By employing artificial neural networks for energy disaggregation, the determination of energy consumption of industrial machinery is made possible. Therefore, a generally applicable cross-energy carrier method to disaggregate the energy consumption of machinery in manufacturing processes is developed using a design science research approach and validated through a practical case study utilizing a compressed air demonstrator. The results show that the utilization of artificial neural networks is well-suited for energy disaggregation of industrial data, effectively identifying on and off states, multi-level states and continuously variable states. Non-intrusive load monitoring should be further considered in the research of emerging artificial intelligence technologies in energy consumption evaluation. It can be a viable alternative for intrusive load monitoring and is a prerequisite to installing energy meters for every machine.

Non-intrusive reduced-order model for predicting transonic flow with varying geometries

A Non-Intrusive Reduced-Order Model(NIROM)based on Proper Orthogonal Decomposition(POD)has been proposed for predicting the flow fields of transonic airfoils with geometry parameters.To provide a better reduced-order subspace to approximate the real flow field,a domain decomposition method has been used to separate the hard-to-predict regions from the full field and POD has been adopted in the regions individually.An Artificial Neural Network(ANN)has replaced the Radial Basis Function(RBF)to interpolate the coefficients of the POD modes,aiming at improving the approximation accuracy of the NIROM for non-samples.When predicting the flow fields of transonic airfoils,the proposed NIROM has demonstrated a high performance.

A Robust Blade Design Method based on Non-Intrusive Polynomial Chaos Considering Profile Error

To weaken the influence of profile error on compressor aerodynamic performance, especially on pressure ratio and efficiency, a robust design method considering profile error is built to improve the robustness of aerodynamic performance of the blade. The characteristics of profile error are random and small-scaled, which means that to evaluate the influence of profile error on blade aerodynamic performance is a time-intensive and high-precision work. For this reason, non-intrusive polynomial chaos(NIPC) and Kriging surrogate model are introduced in this robust design method to improve the efficiency of uncertainty quantification(UQ) and ensure the evaluate accuracy. The profile error satisfies the Gaussian distribution, and NIPC is carried out to do uncertainty quantification since it has advantages in prediction accuracy and efficiency to get statistical behavior of random profile error. In the integrand points of NIPC, several surrogate models are established based on Latin hypercube sampling(LHS)+ Kriging, which further reduces the costs of optimization design by replacing calling computational fluid dynamic(CFD) repeatedly. The results show that this robust design method can significantly improve the performance robustness in shorter time(40 times faster) without losing accuracy, which is meaningful in engineering application to reduce manufacturing cost in the premise of ensuring the aerodynamic performance. Mechanism analysis of the robustness improvement samples carried out in current work can help find out the key parameter dominating the robustness under the disturbance of profile error, which is meaningful to further improvement of compressor robustness.

A systematic approach to ON-OFF event detection and clustering analysis of non-intrusive appliance load monitoring

The aim of non-intrusive appliance load monitoring （NIALM） is to disaggregate the energy consumption of individual electrical appliances from total power consumption utilizing non-intrusive methods. In this paper, a systematic approach to 0N-0FF event detection and clustering analysis for NIALM were presented. From the aggregate power consumption data set, the data are passed through median filtering to reduce noise and prepared for the event detection algorithm. The event detection algorithm is to determine the switching of ON and OFF status of electrical appliances. The goodness- of-fit （GOF） methodology is the event detection algorithm implemented. After event detection, the events detected were paired into ON-0FF pairing appliances. The results from the ON-OFF pairing algorithm were further clustered in groups utilizing the K-means clustering analysis. The K- means clustering were implemented as an unsupervised learning methodology for the clustering analysis. The novelty of this paper is the determination of the time duration an electrical appliance is turned ON through combination of event detection, ON-OFF pairing and K- means clustering. The results of the algorithm implemen- tation were discussed and ideas on future work were also proposed.

Analysis of Dynamic Appliance Flexibility Considering User Behavior via Non-intrusive Load Monitoring and Deep User Modeling

The research on non-intrusive load monitoring(NILM)and the growing deployment of home energy manage-ment system(HEMS)have made it possible for households to have a detailed understanding of their power usage and to make appliances participate in demand response(DR)programs.Appliance flexibility analysis helps the HEMS dispatching appli-ances to participate in DR programs without violating user’s comfort level.In this paper,a dynamic appliance flexibility analysis approach using the smart meter data is presented.In the training phase,the smart meter data is preprocessed by NILM to obtain user’s appliances usage behaviors,which is used to train the user model.During operation,the NILM is used to infer recent appliances usage behaviors,and then the user model predicts user’s appliances usage behaviors in the DR period considering long-term behaviors dependences,correlations between appliances and temporal information.The flexibility of each appliance is calculated based on the appliance characteristics as well as the predicted user’s appliances usage behaviors caused by the control of the appliance.The HEMS can choose the appliance with high flexibility to participate in the DR programs.The case study demonstrates the performance of the user model and illustrates how the appliance flexibility analysis is performed using a real-world case.

Comparative Evaluation of Machine Learning Models and Input Feature Space for Non-intrusive Load Monitoring

Recent advancement in computational capabilities has accelerated the research and development of non-intrusive load disaggregation.Non-intrusive load monitoring(NILM)offers many promising applications in the context of energy efficiency and conservation.Load classification is a key component of NILM that relies on different artificial intelligence techniques,e.g.,machine learning.This study employs different machine learning models for load classification and presents a comprehensive performance evaluation of the employed models along with their comparative analysis.Moreover,this study also analyzes the role of input feature space dimensionality in the context of classification performance.For the above purposes,an event-based NILM methodology is presented and comprehensive digital simulation studies are carried out on a low sampling real-world electricity load acquired from four different households.Based on the presented analysis,it is concluded that the presented methodology yields promising results and the employed machine learning models generalize well for the invisible diverse testing data.The multi-layer perceptron learning model based on the neural network approach emerges as the most promising classifier.Furthermore,it is also noted that it significantly facilitates the classification performance by reducing the input feature space dimensionality.