Prospects of 3D Printing Technology in Dental Medicine

With the continuous advancement of technology,the application of 3D printing technology in the field of dental medicine is becoming increasingly widespread.This article aims to explore the current applications and future potential of 3D printing technology in dental medicine and to analyze its benefits and challenges.It first introduces the current state of 3D printing technology in dental implants,crowns,bridges,orthodontics,and maxillofacial surgery.It then discusses the potential applications of 3D printing technology in oral tissue engineering,drug delivery systems,personalized dental prosthetics,and surgical planning.Finally,it analyzes the benefits of 3D printing technology in dental medicine,such as improving treatment accuracy and patient comfort,and shortening treatment times,while also highlighting the challenges faced,such as costs,material choices,and technical limitations.This article aims to provide a reference for professionals in the field of dental medicine and to promote the further application and development of 3D printing technology in this area.

Anisotropic creep behavior of soft-hard interbedded rock masses based on 3D printing and digital imaging correlation technology

Three-dimensional(3D)printing technology is increasingly used in experimental research of geotechnical engineering.Compared to other materials,3D layer-by-layer printing specimens are extremely similar to the inherent properties of natural layered rock masses.In this paper,soft-hard interbedded rock masses with different dip angles were prepared based on 3D printing(3DP)sand core technology.Uniaxial compression creep tests were conducted to investigate its anisotropic creep behavior based on digital imaging correlation(DIC)technology.The results show that the anisotropic creep behavior of the 3DP soft-hard interbedded rock mass is mainly affected by the dip angles of the weak interlayer when the stress is at low levels.As the stress level increases,the effect of creep stress on its creep anisotropy increases significantly,and the dip angle is no longer the main factor.The minimum value of the long-term strength and creep failure strength always appears in the weak interlayer within 30°–60°,which explains why the failure of the layered rock mass is controlled by the weak interlayer and generally emerges at 45°.The tests results are verified by comparing with theoretical and other published studies.The feasibility of the 3DP soft-hard interbedded rock mass provides broad prospects and application values for 3DP technology in future experimental research.

The Controlled-releasing Drug Implant based on the Three Dimensional Printing Technology: Fabrication and Properties of Drug Releasing in vivo

Three dimensional （3D） printing technology was utilized to fabricate a new type of drug implant with complicated architectures, employing levofloxacin （LVFX） and rifampicine （RFP） as model drugs. The prepared drug implant prototype consists of a doublelayer structure, of which the upper region is a reservoir system containing RFP and the lower region is a matrix one containing LVFX. The release test in vivo revealed that LVFX was released in the early stage; no RFP was detected until 8th day; both of them continuously released more than 6 weeks. Therefore, 3D printing technology provides a precise and feasible method to fabricate a controlled-releasing drug implant with complicated architectures and this drug implant may present a new strategy for the prophylaxis and treatment of bone diseases such as combined bone infections and bone tuberculosis in the near future.

Experimental investigation on the invert stability of operating railway tunnels with different drainage systems using 3D printing technology

In recent years, the invert anomalies of operating railway tunnels in water-rich areas occur frequently,which greatly affect the transportation capacity of the railway lines. Tunnel drainage system is a crucial factor to ensure the invert stability by regulating the external water pressure(EWP). By means of a threedimensional(3D) printing model, this paper experimentally investigates the deformation behavior of the invert for the tunnels with the traditional drainage system(TDS) widely used in China and its optimized drainage system(ODS) with bottom drainage function. Six test groups with a total of 110 test conditions were designed to consider the design factors and environmental factors in engineering practice,including layout of the drainage system, blockage of the drainage system and groundwater level fluctuation. It was found that there are significant differences in the water discharge, EWP and invert stability for the tunnels with the two drainage systems. Even with a dense arrangement of the external blind tubes, TDS was still difficult to eliminate the excessive EWP below the invert, which is the main cause for the invert instability. Blockage of drainage system further increased the invert uplift and aggravated the track irregularity, especially when the blockage degree is more than 50%. However, ODS can prevent these invert anomalies by reasonably controlling the EWP at tunnel bottom. Even when the groundwater level reached 60 m and the blind tubes were fully blocked, the invert stability can still be maintained and the railway track experienced a settlement of only 1.8 mm. Meanwhile, the on-site monitoring under several rainstorms further showed that the average EWP of the invert was controlled within 84 k Pa, while the maximum settlement of the track slab was only 0.92 mm, which also was in good agreement with the results of model test.

Three-dimensional printing technology for patient-matched instrument in treatment of cubitus varus deformity:A case report

BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an osteotomy guide,with or without a patient-mated plate.Here,we present an interesting CVD case,involving a patient who was treated with corrective biplanar chevron osteotomy using an innovative customized osteotomy guide and a newly designed patient-matched monoblock crosslink plate created with 3DPT.CASE SUMMARY A 32-year-old female presented with a significant CVD from childhood injury.A computer simulation was processed using images from computerized tomography scans of both upper extremities.The biplanar chevron osteotomy was designed to create identical anatomy between the mirror image of the contralateral distal humerus and the osteotomized distal humerus.Next,the customized osteotomy guide and patient-matched monoblock crosslink plate were designed and printed.A simulation osteotomy was created for the real-sized bone model,and the operation was performed using the posterior paratricipital approach with k-wire positioning from the customized osteotomy guide as a predrilled hole for screw fixation to achieve immediate control of the reduction after osteotomy.Our method allowed for successful treatment of the CVD case,significantly improving the patient’s radiographic and clinical outcomes,with satisfactory result.CONCLUSION 3DPT-created patient-matched osteotomy guide and instrumentation provides accurate control during CVD correction.

Application Status and Prospect of Three-Dimensional Printing Technology in the Field of Medical Devices

Three-dimensional(3D)printing technology belongs to a new manufacturing science and has been widely used in various fields of industry.This article will apply 3D printing technology as its main research topic,with emphasis on its application in the field of medical devices and prospects for contribution.

Interventional Therapy for Cerebral Aneurysms Under the Guidance of 3D Printing Technology

Objective:To explore the clinical method and effect of 3D printing in the treatment of cerebral aneurysms.Methods:The authors research work on the hospital,work time in February 2019-February 2020,this study selected patients of cerebral aneurysms,this period are selected for treatment of 100 cases of patients,randomly divided into two groups,a group to give simple intervention,named as the control group,another group for the interventional therapy under the guidance of 3 D printing,named as experimental group,analyze the effect of two groups of patients with clinical intervention.Results:The length of hospital stay in the experimental group was shorter than that in the control group.Meanwhile,the incidence of complications and adverse reactions in the experimental group and the control group were 6.00%and 18.00%,the experimental group was better(P<0.05).Conclusion:3D printing technology can be applied in the treatment of patients with cerebral aneurysms to provide guidance for interventional surgical treatment.It has significant effect,can reduce the incidence complications in patients,has significant clinical effect,and can be popularized.

An analysis of the development trends of China's printing and printing machinery manufacture technology——Presentation in the International Forum for the Development of Printing Technology

2006 is the commencing year of the Eleventh Five-Year Plan for National Economic and Social Development, and also the fifth anniversary of China joining the World Trade Organization. After the development of the transition period in these years, China’s national economy has successfully inte grated into the global system. National economy remains de- veloping at a high speed. The total amount of import and export reached more than 1.4 trillion USD,

The First International Digital Printing and Image Technology Exhibition & The Sixth International Exhibition of Quick Printing Equipment & Technology

Time: Sept.4-6, 2008Venue: Shenzhen Convention & Exhibition CenterSponsor: Printing and Printing Equipment Industries Association of China (PEIAC)Organizers: The Exhibition Department of

It's Closed In Triumph,'97 International Screen Special Printing Technology Exhibition

’97 Wuhan International Screen Special Printing Technology Exhibition was held from May 21—24, 1997 in Wuhan city,the capital of Hubei Province. 120 famous exhibitors from China, USA, Canada, Holland, Japan, Korea, and Hong Kong, Taiwan districts attended the Exhibition. The booth area was more than 5000 m^2.

互联网+翻转课堂教学模式在“机械工程英语”课程中的应用——以“3D Printing Technology”教学为例

相比于传统教学模式,互联网+翻转课堂教学模式能充分利用课前、课后的零碎学习时间,在面授课堂上开展任务型教学活动,但需根据不同教学情况进行恰当应用才能发挥效能,如运用在"机械工程英语"课程文献"3D打印技术"的教学中,根据高职生的学情,将记忆性和难度低的知识点置于课前,将较难的知识点和任务型教学活动及实验室观摩操作活动置于课上进行"部分翻转",辅以课后拓展,使学生能够扎实掌握知识,熟练运用技能。

Three-dimensional printing: review of application in medicine and hepatic surgery

Three-dimensional(3D) printing(3DP) is a rapid prototyping technology that has gained increasing recognition in many different fields. Inherent accuracy and low-cost property enable applicability of 3DP in many areas, such as manufacturing, aerospace,medical, and industrial design. Recently, 3DP has gained considerable attention in the medical field. The image data can be quickly turned into physical objects by using 3DP technology. These objects are being used across a variety of surgical specialties. The shortage of cadaver specimens is a major problem in medical education. However, this concern has been solved with the emergence of 3DP model. Custom-made items can be produced by using 3DP technology. This innovation allows 3DP use in preoperative planning and surgical training. Learning is difficult among medical students because of the complex anatomical structures of the liver. Thus, 3D visualization is a useful tool in anatomy teaching and hepatic surgical training. However,conventional models do not capture haptic qualities. 3DP can produce highly accurate and complex physical models. Many types of human or animal differentiated cells can be printed successfully with the development of 3D bio-printing technology. This progress represents a valuable breakthrough that exhibits many potential uses, such as research on drug metabolism or liver disease mechanism. This technology can also be used to solve shortage of organs for transplant in the future.

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium- and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems.Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems.Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion.Additionally,these switches did not employ any structures in securing internal gas composition,resulting in inconsistent performance under harsh atmospheres.In this work,a novel planar triggered spark-gap switch(PTS)with a hermetically sealed cavity was batched-prepared with printed circuit board(PCB)technology,to achieve reusability with low cost.The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision.The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times.The calculated switch voltage and circuit current were consistent with those derived from real-world measurements.Finally,PCB PTS was used to introduce hexanitrostilbene(HNS)pellets in a pulse power system to verify its performance.

Teaching Reform of Building Construction Course under the Background of New Digital Technology

With the advent of the information age,all walks of life have paid more and more attention to the development and application of digital technology.At the same time,the construction industry,which is a traditionally important industry,is not an exception.A series of high-tech digital technologies have been widely used in architectural design and construction,such as BIM technology,3D printing technology,and VR technology.In view of the teaching link of architectural talent training,it is necessary to keep up with the development trend of the digital age,integrate these three kinds of technology into architectural teaching,and impart knowledge to students from planar 2D textbooks to 3D visual digital models,and further transform it from 3D digital to physical perceive or virtual simulation level,and reform teaching methods in all dimensions and in all dimensions to improve teaching effect.In this paper,the feasibility and necessity of integration of the above three architectural digital techniques into the teaching process of"building construction"from the aspects of teaching content,teaching method and teaching evaluation were discussed,and a new teaching model under the background of digital technology was proposed,which has certain teaching reference significance.

Mechanical Experiment for 3D Printing of Titanium Bone Bionic Dental Implants

[Objectives] To explore the flexural strength of 3D printed titanium bone bionic dental implants and provide a scientific basis for the clinical application of 3D printed porous bionic bone dental implants. [Methods] The cone-beam CT( CBCT) image information of 20 premolars extracted by orthodontic requirement was collected,and a new porous bone bionic dental implant was produced using modeling software and 3D printer. The premolars were divided into two groups( A and B). The universal testing machine was used to test the flexural strength of the two groups and the difference in flexural strength between the two groups was compared through statistics. [Results]Twenty 3D printed porous titanium bone bionic implants were accurately produced; the morphology of group A and group B were extremely similar to each other; the average flexural strength of group A was 2 767. 92 N,while the average flexural strength of group B was 778. 77 N,showing that the average flexural strength of group A was significantly higher than that of group B,and the difference was statistically significant( P < 0. 05).[Conclusions]The personalized porous structure root implants produced by 3D printing technology are very similar to the target tooth morphology,and show high accuracy and small error of production. Besides,the flexural strength of 3D printed personalized porous structure root implants can fully meet the requirements of the maximum occlusal force for dental implant restoration. It is expected to provide a scientific basis for clinical application of 3 D printed porous bionic bone tooth implants.

Found Different Attitude Fracture Characteristics of the NMR Curve by Application of 3D Printing Samples

Nuclear magnetic resonance (NMR) has many advantages, such as little testing time, no harm to rock specimen, and is widely used in the measurement of reservoir pore structure. 3D printing also has many advantages, such as repeating the printing the same attributes samples, forming sample by known rock pore structure, adding different pores or fractures to sample. For the study of fractured reservoir provides a new train of thought by combining NMR and 3D printing. Nuclear magnetic core analysis is an important work in the study of core, using a T2 spectrum at a certain echo time can also be found in the core fractures. The study, by CT scans to establish reservoir pore structure, based on the basic of adding different attitude fracture forming four fracture characteristics of rock sample, using 3D printing for solid sample, through the analysis of the nuclear magnetic resonance (NMR) of these sample, get the response characteristics of fracture characteristics on the T2 curve, the quantitative calculation of fracture porosity of rock sample, the result accord with to establish the model of fracture porosity is very good. For the study of fractured oil and gas reservoir development the new field.

Big Future for Chinese 3D Printing

The Chinese national standardization technical committee on additive manufacturing(SAC/TC 562)was set up in Beijing on April 21,which was composed of 61 members from relevant universities,enterprises,institutes and trade associations with the scope covering various fields of materials,equipment,testing,certification, medicine,etc. Chinese technology on additive manufac turing

Application of digital technology in nasal reconstruction

Nasal defects are facial defects caused by trauma,tumors,or congenital diseases that seriously damage a patient’s physical and mental health.Nasal defects,from skin defects to total nasal defects,require surgical repair and reconstruction to restore the appearance and function of the nose,which have always been challenges for rhinoplasty.The development of digital technology has increased the possibility of nasal reconstruction.Digital technology is involved in the preoperative,intraoperative,and postoperative stages of nasal construction and is of great significance in improving the effect of this surgery.This article reviews the application of major digital technologies,including three-dimensional(3D)imaging technology,computer-assisted surgical navigation,and 3D printing,in nasal reconstruction and discusses the shortcomings of the current application of digital technology.

Talent-led design endows apparel printing with new vitality

Recently, the First “Primary Color Cup” Fashion Women’s Print Design Competition Award Ceremony and New Product Launch Conference was held in Keqiao. It was sponsored by China Printing Technology Association, and jointly organized by Screenprinting & Graphic Imaging Branch of China Printing Technology Association and Shaoxing Primary Color Digital Technology Co., Ltd.