Estimation of unknown parameters in exponential models by linear and nonlinear fitting methods is discussed. Based on the extreme value theorem and Taylor series expansion, it is proved theoretically that the paramete...Estimation of unknown parameters in exponential models by linear and nonlinear fitting methods is discussed. Based on the extreme value theorem and Taylor series expansion, it is proved theoretically that the parameters estimated by the linear fitting method alone cannot minimize the sum of the squared residual errors in the measurement data when measurement noise is involved in the data. Numerical simulation is performed to compare the performance of the linear and nonlinear fitting methods. Simulation results show that the linear method can obtain only a suboptimal estimate of the unknown parameters and that the nonlinear method gives more accurate results. Application of the fitting methods is demonstrated where the water spectral attenuation coefficient is estimated from underwater images and imaging distances, which supports the improvement in the accuracy of parameter estimation by the nonlinear fitting method.展开更多
The optimal condition and its geometrical characters of the least square adjustment were proposed. Then the relation between the transformed surface and least squares was discussed. Based on the above, a non iterative...The optimal condition and its geometrical characters of the least square adjustment were proposed. Then the relation between the transformed surface and least squares was discussed. Based on the above, a non iterative method, called the fitting method of pseudo polynomial, was derived in detail. The final least squares solution can be determined with sufficient accuracy in a single step and is not attained by moving the initial point in the view of iteration. The accuracy of the solution relys wholly on the frequency of Taylor’s series. The example verifies the correctness and validness of the method. [展开更多
Coal consumption curve of the thermal power plant can reflect the function relationship between the coal consumption of unit and load, which plays a key role for research on unit economic operation and load optimal di...Coal consumption curve of the thermal power plant can reflect the function relationship between the coal consumption of unit and load, which plays a key role for research on unit economic operation and load optimal dispatch. Now get coal consumption curve is generally obtained by least square method, but which are static curve and these curves remain unchanged for a long time, and make them are incompatible with the actual operation situation of the unit. Furthermore, coal consumption has the characteristics of typical nonlinear and time varying, sometimes the least square method does not work for nonlinear complex problems. For these problems, a method of coal consumption curve fitting of the thermal power plant units based on genetic algorithm is proposed. The residual analysis method is used for data detection;quadratic function is employed to the objective function;appropriate parameters such as initial population size, crossover rate and mutation rate are set;the unit’s actual coal consumption curves are fitted, and comparing the proposed method with least squares method, the results indicate that fitting effect of the former is better than the latter, and further indicate that the proposed method to do curve fitting can best approximate known data in a certain significance, and they can real-timely reflect the interdependence between power output and coal consumption.展开更多
How to reconstruct a dynamic displacement of slender flexible structures is the key technology to develop smart structures and structural health monitoring(SHM), which are beneficial for controlling the structural vib...How to reconstruct a dynamic displacement of slender flexible structures is the key technology to develop smart structures and structural health monitoring(SHM), which are beneficial for controlling the structural vibration and protecting the structural safety. In this paper, the displacement reconstruction method based on cubic spline fitting is put forward to reconstruct the dynamic displacement of slender flexible structures without the knowledge of modeshapes and applied loading. The obtained strains and displacements are compared with the results calculated by ABAQUS to check the method's validity. It can be found that the proposed method can accurately identify the strains and displacement of slender flexible structures undergoing linear vibrations, nonlinear vibrations, and parametric vibrations. Under the concentrated force, the strains of slender flexible structures will change suddenly along the axial direction. With locally densified measurement points, the present reconstruction method still works well for the strain concentration problem.展开更多
目的通过一组单线性梯度洗脱实验获取线性溶剂强度模型的参数值,为色谱图的预测提供所必须的参数值。方法首先,在实验中固定流动相组成的起始和结束值,通过改变梯度洗脱的时间,从而改变梯度的斜率(B)。测定溶质在这些梯度条件下的保留时...目的通过一组单线性梯度洗脱实验获取线性溶剂强度模型的参数值,为色谱图的预测提供所必须的参数值。方法首先,在实验中固定流动相组成的起始和结束值,通过改变梯度洗脱的时间,从而改变梯度的斜率(B)。测定溶质在这些梯度条件下的保留时间,计算其流出色谱柱时所对应的流动相组成(φR)。然后,将描述φR与B之间关系的数学公式对实验数据进行非线性拟合,从而获取线性溶剂强度模型的参数值。拟合基于Levenberg-Marquardt算法,通过Excel中的Visual Basic for Applications(VBA)语言编程实现。结果计算机程序的可靠性通过实验进行验证。以12种芳环化合物为分离的对象,以C18柱为固定相,含1%乙酸的甲醇-水溶液为流动相,应用所编写的程序对单线性梯度洗脱实验数据进行处理,获取溶剂强度模型的参数值。然后,根据所得到的参数值预测多线性梯度洗脱条件下的色谱图,得到的理论色谱图与实验色谱图吻合。结论所建立的方法可快速准确地获取线性溶剂强度模型的参数值,具有良好的实用价值。展开更多
基金Project supported by the National Natural Science Foundation of China(Nos.61605038 and 11304278)the National High-Tech R&D Program(863)of China(No.2014AA093400)the Open Fund of State Key Laboratory of Satellite Ocean Environment Dynamics(No.SOED1606)
文摘Estimation of unknown parameters in exponential models by linear and nonlinear fitting methods is discussed. Based on the extreme value theorem and Taylor series expansion, it is proved theoretically that the parameters estimated by the linear fitting method alone cannot minimize the sum of the squared residual errors in the measurement data when measurement noise is involved in the data. Numerical simulation is performed to compare the performance of the linear and nonlinear fitting methods. Simulation results show that the linear method can obtain only a suboptimal estimate of the unknown parameters and that the nonlinear method gives more accurate results. Application of the fitting methods is demonstrated where the water spectral attenuation coefficient is estimated from underwater images and imaging distances, which supports the improvement in the accuracy of parameter estimation by the nonlinear fitting method.
文摘The optimal condition and its geometrical characters of the least square adjustment were proposed. Then the relation between the transformed surface and least squares was discussed. Based on the above, a non iterative method, called the fitting method of pseudo polynomial, was derived in detail. The final least squares solution can be determined with sufficient accuracy in a single step and is not attained by moving the initial point in the view of iteration. The accuracy of the solution relys wholly on the frequency of Taylor’s series. The example verifies the correctness and validness of the method. [
文摘Coal consumption curve of the thermal power plant can reflect the function relationship between the coal consumption of unit and load, which plays a key role for research on unit economic operation and load optimal dispatch. Now get coal consumption curve is generally obtained by least square method, but which are static curve and these curves remain unchanged for a long time, and make them are incompatible with the actual operation situation of the unit. Furthermore, coal consumption has the characteristics of typical nonlinear and time varying, sometimes the least square method does not work for nonlinear complex problems. For these problems, a method of coal consumption curve fitting of the thermal power plant units based on genetic algorithm is proposed. The residual analysis method is used for data detection;quadratic function is employed to the objective function;appropriate parameters such as initial population size, crossover rate and mutation rate are set;the unit’s actual coal consumption curves are fitted, and comparing the proposed method with least squares method, the results indicate that fitting effect of the former is better than the latter, and further indicate that the proposed method to do curve fitting can best approximate known data in a certain significance, and they can real-timely reflect the interdependence between power output and coal consumption.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51679167 and 51525803)
文摘How to reconstruct a dynamic displacement of slender flexible structures is the key technology to develop smart structures and structural health monitoring(SHM), which are beneficial for controlling the structural vibration and protecting the structural safety. In this paper, the displacement reconstruction method based on cubic spline fitting is put forward to reconstruct the dynamic displacement of slender flexible structures without the knowledge of modeshapes and applied loading. The obtained strains and displacements are compared with the results calculated by ABAQUS to check the method's validity. It can be found that the proposed method can accurately identify the strains and displacement of slender flexible structures undergoing linear vibrations, nonlinear vibrations, and parametric vibrations. Under the concentrated force, the strains of slender flexible structures will change suddenly along the axial direction. With locally densified measurement points, the present reconstruction method still works well for the strain concentration problem.
文摘目的通过一组单线性梯度洗脱实验获取线性溶剂强度模型的参数值,为色谱图的预测提供所必须的参数值。方法首先,在实验中固定流动相组成的起始和结束值,通过改变梯度洗脱的时间,从而改变梯度的斜率(B)。测定溶质在这些梯度条件下的保留时间,计算其流出色谱柱时所对应的流动相组成(φR)。然后,将描述φR与B之间关系的数学公式对实验数据进行非线性拟合,从而获取线性溶剂强度模型的参数值。拟合基于Levenberg-Marquardt算法,通过Excel中的Visual Basic for Applications(VBA)语言编程实现。结果计算机程序的可靠性通过实验进行验证。以12种芳环化合物为分离的对象,以C18柱为固定相,含1%乙酸的甲醇-水溶液为流动相,应用所编写的程序对单线性梯度洗脱实验数据进行处理,获取溶剂强度模型的参数值。然后,根据所得到的参数值预测多线性梯度洗脱条件下的色谱图,得到的理论色谱图与实验色谱图吻合。结论所建立的方法可快速准确地获取线性溶剂强度模型的参数值,具有良好的实用价值。
