期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Preparation,Microstructure and Properties of NiO-Cr_2O_3-TiO_2 Infrared Radiation Coating 被引量:8
1
作者 Wu Chen Weiping Ye +3 位作者 Xudong Cheng Wei Duan Fang Mao Deliang Li 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2009年第5期695-698,共4页
The spherical agglomerated particles were fabricated by spray drying with the powders of NiO, Cr2O3 and TiO2. Plasma spray power, which has good property of flowability, was acquired by heat treatment from the particl... The spherical agglomerated particles were fabricated by spray drying with the powders of NiO, Cr2O3 and TiO2. Plasma spray power, which has good property of flowability, was acquired by heat treatment from the particles at 1200℃ in the reducing atmosphere. Dark and uniform coating of More than 50 μm thick was deposited on the copper sheet substrate by plasma spraying. It is found that the infrared normal total emissivity of the coating is up to 0.91 at 600℃ by infrared radiation testing. The X-ray diffraction analysis shows that the formation of (Cr0.88Ti0.12)2O3 and spinel structural NiCr2O4 in the coating is the main reason for high efficient infrared radiation, and the phase structure and performance of coating is favorable under the thermal cycle between room temperature and 600℃. 展开更多
关键词 Spray drying Agglomerated particles Plasma spraying normal total emissivity
下载PDF
Study of Thermal Radiation Properties of Pyrolytic Carbon Protective Coatings for Monocrystalline Silicon Furnace
2
作者 Wei-Wei Cao Bo Zhu +3 位作者 Wei Zhao Yong-Wei Wang Yang Chen Xi-Hai Wang 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2013年第4期36-40,共5页
The thermal radiation properties of pyrolytic carbon(PyC)protective coatings for monocrystalline silicon furnace prepared by different processes were tested.The changes of normal emissivity of carbon materials caused ... The thermal radiation properties of pyrolytic carbon(PyC)protective coatings for monocrystalline silicon furnace prepared by different processes were tested.The changes of normal emissivity of carbon materials caused by PyC protective coatings were discussed,and the influence of phase structure and surface appearance on the thermal radiation properties was investigated.The results show that the thermal radiation properties of PyC protective coatings with the wave band of 5-25μm are better than C/C substrate,further,normal spectral emissivity of CVD PyC coating remains basically at 0.85-0.90,and the normal total emissivity can reach0.89,which shows high thermal radiation performance.For resin PyC coating and CVD PyC coating,the degree of graphitization are 44.53%and 16.28%respectively,and the R value of Raman spectrum are 0.964and 1.384 respectively.Relatively disorder graphite structure of the latter causes various vibration modes,and the spectral emissivity is better,so the thermal radiation property of CVD PyC coating is excellent.A lot of spherical particles exists on the surface of the CVD PyC coating,and the more interface and spacing of particles reduce the number of particles per unit volume.Therefore,the scattering of thermal radiation is strongly strengthened,and the spectral emissivity is higher. 展开更多
关键词 Monocrystalline silicon furnace PyC protective coating normal spectral emissivity normal total emissivity Graphite structure
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部