Welding of high strength low alloy steels (HSLA) involves usage of low, even and high strength filler materials (electrodes) than the parent material depending on the application of the welded structures and the avail...Welding of high strength low alloy steels (HSLA) involves usage of low, even and high strength filler materials (electrodes) than the parent material depending on the application of the welded structures and the availability of the filler material. In the present investigation, the fatigue crack growth behaviour of weld metal (WM) and heat affected zone (HAZ) regions of under matched (UM), equal matched (EM) and over matched (OM) joints has been studied. The base material used in this investigation is HSLA-80 steel of weldable grade. Shielded metal arc welding (SMAW) process has been used to fabricate the butt joints. Centre cracked tension (CCT) specimen has been used to evaluate the fatigue crack growth behaviour of the welded joints. Fatigue crack growth experiments have been conducted using servo hydraulic controlled fatigue testing machine at constant amplitude loading (R=0).A method has been proposed to predict the fatigue life of HSLA steel welds using fracture mechanics approach by incorporating influences of mismatch ratio (MMR) and notch location.展开更多
Shear strength and shear-induced Hertzian contact damage in Ti_3SiC_2 were investigated using double-notched-beam specimen and steel spherical indenter, respectively. The shear strength of 40 MPa that was only about 1...Shear strength and shear-induced Hertzian contact damage in Ti_3SiC_2 were investigated using double-notched-beam specimen and steel spherical indenter, respectively. The shear strength of 40 MPa that was only about 10% of bending strength was obtained for this novel ceramic. The SEM fractograph of specimens failed in shear test indicated a combination of intergranular and transgranular fracture. Under a contact load, plastic indent without cone crack could be formed on the surface of Ti3SiC2 sample. Optical observation on side view showed half-circle cracks around the damage zone below the indent, and the crack shape was consistent with the contrail of the principal shearing stress. The low shear strength and the shearing-activated intergranular sliding were confirmed being the key factors for failure in Ti3SiC2.展开更多
文摘Welding of high strength low alloy steels (HSLA) involves usage of low, even and high strength filler materials (electrodes) than the parent material depending on the application of the welded structures and the availability of the filler material. In the present investigation, the fatigue crack growth behaviour of weld metal (WM) and heat affected zone (HAZ) regions of under matched (UM), equal matched (EM) and over matched (OM) joints has been studied. The base material used in this investigation is HSLA-80 steel of weldable grade. Shielded metal arc welding (SMAW) process has been used to fabricate the butt joints. Centre cracked tension (CCT) specimen has been used to evaluate the fatigue crack growth behaviour of the welded joints. Fatigue crack growth experiments have been conducted using servo hydraulic controlled fatigue testing machine at constant amplitude loading (R=0).A method has been proposed to predict the fatigue life of HSLA steel welds using fracture mechanics approach by incorporating influences of mismatch ratio (MMR) and notch location.
基金This work was supported by the National Outstanding Young Scientist Foundation(No.50125204 for Y.Bao and No.59925208 for Y.Zhou)“The Hundred-Talent Program”of Chinese Academy of Sciences and“863”program in China.
文摘Shear strength and shear-induced Hertzian contact damage in Ti_3SiC_2 were investigated using double-notched-beam specimen and steel spherical indenter, respectively. The shear strength of 40 MPa that was only about 10% of bending strength was obtained for this novel ceramic. The SEM fractograph of specimens failed in shear test indicated a combination of intergranular and transgranular fracture. Under a contact load, plastic indent without cone crack could be formed on the surface of Ti3SiC2 sample. Optical observation on side view showed half-circle cracks around the damage zone below the indent, and the crack shape was consistent with the contrail of the principal shearing stress. The low shear strength and the shearing-activated intergranular sliding were confirmed being the key factors for failure in Ti3SiC2.
