Cellular thin-shell structures are widely applied in ultralightweight designs due to their high bearing capacity and strength-to-weight ratio.In this paper,a full-scale isogeometric topology optimization(ITO)method ba...Cellular thin-shell structures are widely applied in ultralightweight designs due to their high bearing capacity and strength-to-weight ratio.In this paper,a full-scale isogeometric topology optimization(ITO)method based on Kirchhoff-Love shells for designing cellular tshin-shell structures with excellent damage tolerance ability is proposed.This method utilizes high-order continuous nonuniform rational B-splines(NURBS)as basis functions for Kirchhoff-Love shell elements.The geometric and analysis models of thin shells are unified by isogeometric analysis(IGA)to avoid geometric approximation error and improve computational accuracy.The topological configurations of thin-shell structures are described by constructing the effective density field on the controlmesh.Local volume constraints are imposed in the proximity of each control point to obtain bone-like cellular structures.To facilitate numerical implementation,the p-norm function is used to aggregate local volume constraints into an equivalent global constraint.Several numerical examples are provided to demonstrate the effectiveness of the proposed method.After simulation and comparative analysis,the results indicate that the cellular thin-shell structures optimized by the proposed method exhibit great load-carrying behavior and high damage robustness.展开更多
Hollow core-shell structure nanomaterials have been broadly used in energy storage, catalysis, reactor,and other fields due to their unique characteristics, including the synergy between different materials,a large sp...Hollow core-shell structure nanomaterials have been broadly used in energy storage, catalysis, reactor,and other fields due to their unique characteristics, including the synergy between different materials,a large specific surface area, small density, large charge carrying capacity and so on. However, their synthesis processes were mostly complicated, and few researches reported one-step encapsulation of different valence states of precious metals in carbon-based materials. Hence, a novel hollow core-shell nanostructure electrode material, RuO_(2)@Ru/HCs, with a lower mass of ruthenium to reduce costs was constructed by one-step hydrothermal method with hard template and co-assembled strategy, consisting of RuO_(2) core and ruthenium nanoparticles(Ru NPs) in carbon shell. The Ru NPs were uniformly assembled in the carbon layer, which not only improved the electronic conductivity but also provided more active centers to enhance the pseudocapacitance. The RuO_(2) core further enhanced the material’s energy storage capacity. Excellent capacitance storage(318.5 F·g^(-1)at 0.5 A·g^(-1)), rate performance(64.4%) from 0.5 A·g^(-1)to 20 A·g^(-1), and cycling stability(92.3% retention after 5000 cycles) were obtained by adjusting Ru loading to 0.92%(mass). It could be attributed to the wider pore size distribution in the micropores which increased the transfer of electrons and protons. The symmetrical supercapacitor device based on RuO_(2)@Ru/HCs could successfully light up the LED lamp. Therefore, our work verified that interfacial modification of RuO_(2) and carbon could bring attractive insights into energy density for nextgeneration supercapacitors.展开更多
A theoretical model of a friction pendulum system (FPS) is introduced to examine its application for the seismic isolation of spatial lattice shell structures. An equation of motion of the lattice shell with FPS bea...A theoretical model of a friction pendulum system (FPS) is introduced to examine its application for the seismic isolation of spatial lattice shell structures. An equation of motion of the lattice shell with FPS bearings is developed. Then, seismic isolation studies are performed for both double-layer and single-layer lattice shell structures under different seismic input and design parameters of the FPS. The influence of frictional coefficients and radius of the FPS on seismic performance are discussed. Based on the study, some suggestions for seismic isolation design of lattice shells with FPS bearings are given and conclusions are made which could be helpful in the application of FPS.展开更多
The purpose of the present work is to study the buckling problem with plate/shell topology optimization of orthotropic material. A model of buckling topology optimization is established based on the independent, conti...The purpose of the present work is to study the buckling problem with plate/shell topology optimization of orthotropic material. A model of buckling topology optimization is established based on the independent, continuous, and mapping method, which considers structural mass as objective and buckling critical loads as constraints. Firstly, composite exponential function (CEF) and power function (PF) as filter functions are introduced to recognize the element mass, the element stiffness matrix, and the element geometric stiffness matrix. The filter functions of the orthotropic material stiffness are deduced. Then these filter functions are put into buckling topology optimization of a differential equation to analyze the design sensitivity. Furthermore, the buckling constraints are approximately expressed as explicit functions with respect to the design variables based on the first-order Taylor expansion. The objective function is standardized based on the second-order Taylor expansion. Therefore, the optimization model is translated into a quadratic program. Finally, the dual sequence quadratic programming (DSQP) algorithm and the global convergence method of moving asymptotes algorithm with two different filter functions (CEF and PF) are applied to solve the optimal model. Three numerical results show that DSQP&CEF has the best performance in the view of structural mass and discretion.展开更多
Non-spherical Cu@Cu S yolk–shell structures are successfully obtained using Cu_2 O cube templates in a process combining rapid surface sulfidation followed by disproportionation of the Cu_2 O core upon treatment with...Non-spherical Cu@Cu S yolk–shell structures are successfully obtained using Cu_2 O cube templates in a process combining rapid surface sulfidation followed by disproportionation of the Cu_2 O core upon treatment with a hydrochloric acid solution. By employing the above method,Cu@Cu S yolk–shell structures with different morphologies,including octahedral, truncated octahedral, and cuboctahedral shapes, can be synthesized. The void space within the hollow structures provides a unique confined space, where the metallic copper present in the core of a shell can be protected from agglomeration and oxidation. Furthermore,the presence of metal copper in these hollow structurescontributes to improvement in the photocatalytic properties of these materials. The application of these Cu@Cu S structures indeed shows clearly improved photocatalytic performance.展开更多
A focus of the current nanotechnology has shifted from routine fabrication of nanostructures to designing functional electronic devices and realizing their immense potentials for applications. Due to infusion of multi...A focus of the current nanotechnology has shifted from routine fabrication of nanostructures to designing functional electronic devices and realizing their immense potentials for applications. Due to infusion of multi-functionality into a single system, the utilization of hetero-, core/shell and hierarchical nanostructures has become the key issue for building such devices. ZnS, due to its direct wide bandgap, high index of refraction, high transparency in the visible range and intrinsic polarity, is one of the most useful semiconductors for a wide range of electronics applications. This article provides a dense review of the state-of-the-art research activities in one-dimensional (1D) ZnS-based hetero-, core/shell and hierarchical nanostructures. The particular emphasis is put on their syntheses and applications.展开更多
Reticulated shell structures (RSSs) are characterized as cyclically periodic structures. Mistuning of RSSs will induce structural mode localization. Mode localization has the following two features: some modal vect...Reticulated shell structures (RSSs) are characterized as cyclically periodic structures. Mistuning of RSSs will induce structural mode localization. Mode localization has the following two features: some modal vectors of the structure change remarkably when the values of its physical parameters (mass or stiffness) have a slight change; and the vibration of some modes is mainly restricted in some local areas of the structure. In this paper, two quantitative assessment indexes are introduced that correspond to these two features. The first feature is studied through a numerical example of a RSS, and its induced causes are analyzed by using the perturbation theory. The analysis showed that internally, mode localization is closely related to structural frequencies and externally, slight changes of the physical parameters of the structure cause instability to the RSS. A scaled model experiment to examine mode localization was carried out on a Kiewit single-layer spherical RSS, and both features of mode localization are studied. Eight tests that measured the changes of the physical parameters were carried out in the experiment. Since many modes make their contribution in structural dynamic response, six strong vibration modes were tested at random in the experimental analysis. The change and localization of the six modes are analyzed for each test. The results show that slight changes to the physical parameters are likely to induce remarkable changes and localization of some modal vectors in the RSSs.展开更多
Lithium-ion batteries(LIBs) and sodium-ion batteries(SIBs) have received much attention in energy storage system. In particular, among the great efforts on enhancing the performance of LIBs and SIBs, yolk–shell(YS) s...Lithium-ion batteries(LIBs) and sodium-ion batteries(SIBs) have received much attention in energy storage system. In particular, among the great efforts on enhancing the performance of LIBs and SIBs, yolk–shell(YS) structured materials have emerged as a promising strategy toward improving lithium and sodium storage. YS structures possess unique interior void space, large surface area and short diffusion distance, which can solve the problems of volume expansion and aggregation of anode materials, thus enhancing the performance of LIBs and SIBs. In this review, we present a brief overview of recent advances in the novel YS structures of spheres, polyhedrons and rods with controllable morphology and compositions. Enhanced electrochemical performance of LIBs and SIBs based on these novel YS structured anode materials was discussed in detail.展开更多
To fit in with the strict geometrical integrity and ensure dimensionally consistent fabrication of the welded aerospace structures. the low stress no distortion(LSND)welding, a technique for thin materials, was poinee...To fit in with the strict geometrical integrity and ensure dimensionally consistent fabrication of the welded aerospace structures. the low stress no distortion(LSND)welding, a technique for thin materials, was poineered and developed to provide an ininprocess active control of welding distortion. Satisfactory distortion free results were achieved in both welding of jet engine cases of heat-resistance alloys and rocket fuel tanks of aluminuim alloys, and there need no. reworking operations for post-weld distortion correction. Based on the 'static' method a newly developed method for dvnamic in-process control is also discussed in this paper. Both methods provide quanutiative in-process control of incompatible strains in weld zone and low stress no distortion welding results.展开更多
Zinc-air batteries(ZABs)hold tremendous promise for clean and efficient energy storage with the merits of high theoretical energy density and environmental friendliness.However,the performance of practical ZABs is sti...Zinc-air batteries(ZABs)hold tremendous promise for clean and efficient energy storage with the merits of high theoretical energy density and environmental friendliness.However,the performance of practical ZABs is still unsatisfactory because of the inevitably decreased activity of electrocatalysts when assembly into a thick electrode with high mass loading.Herein,we report a hierarchical electrocatalyst based on carbon microtube@nanotube core-shell nanostructure(CMT@CNT),which demonstrates superior electrocatalytic activity for oxygen reduction reaction and oxygen evolution reaction with a small potential gap of 0.678 V.Remarkably,when being employed as air-cathode in ZAB,the CMT@CNT presents an excellent performance with a high power density(160.6 mW cm^−2),specific capacity(781.7 mAhgZn^−1)as well as long cycle stability(117 h,351 cycles).Moreover,the ZAB performance of CMT@CNT is maintained well even under high mass loading(3 mg cm−2,three times as much as traditional usage),which could afford high power density and energy density for advanced electronic equipment.We believe that this work is promising for the rational design of hierarchical structured electrocatalysts for advanced metal-air batteries.展开更多
It has been challenging to correctly separate the mixed signals into source components when the source number is not known a priori.To reveal the complexity of the measured vibration signals,and provide the priori inf...It has been challenging to correctly separate the mixed signals into source components when the source number is not known a priori.To reveal the complexity of the measured vibration signals,and provide the priori information for the blind source separation,in this paper,we propose a novel source number estimation based on independent component analysis(ICA)and clustering evaluation analysis,and then carry out experiment studies with typical mechanical vibration signals from a shell structure.The results demonstrate that the proposed ICA based source number estimation performs stably and robustly for the shell structure.展开更多
Ark shell Scapharca kagoshimensis is one of the commercially important bivalve resources in East Asia. In Japan, the mass production method for its natural seedlings was developed in the 1880s, and they had been trans...Ark shell Scapharca kagoshimensis is one of the commercially important bivalve resources in East Asia. In Japan, the mass production method for its natural seedlings was developed in the 1880s, and they had been transplanted to an array of the major fishing areas. It has been therefore concerned with its genetic disturbance among not only current but also former fishing areas in Japan. This study was undertaken to ascertain its genetic diversity and population structure in East Asia by means of nucleotide sequence analysis of a 555-bp portion of the mitochondrial DNA COI gene. Of 225 individuals collected from 8 populations and 1 population in Japan and Korea, respectively, a total of 59 haplotypes, including 14 common haplotypes, were found, and Japan and Korea shared 3 common haplotypes. In Japan, the haplotype diversity and nucleotide diversity ranged from 0.65 to 0.93 and from 0.22% to 0.59%, respectively, reflecting relatively high levels of genetic diversity. The values in Korea were determined to be 0.45% and 0.19%, respectively, indicating significantly lower genetic diversity compared with that in Japan. Mismatch distribution analysis and neutrality tests showed a recent history of multiple types of reproduction and signals of demographic change in each population. These results suggest that S. kagoshimensis has experienced rapid population growth or reduction in population size such as a bottleneck in a short period.展开更多
With bamboo shoot shell nanofibers(BSN) and konjac glucomannan(KGM) as precursor materials, the BSN/KGM aerogels were prepared in different proportions by sol-gel method. The surface morphology, microstructure, ch...With bamboo shoot shell nanofibers(BSN) and konjac glucomannan(KGM) as precursor materials, the BSN/KGM aerogels were prepared in different proportions by sol-gel method. The surface morphology, microstructure, characteristic functional groups and thermal properties of BSN/KGM aerogels were characterized by scanning electron microscopy(SEM), infrared spectroscopy(IR), X-ray diffraction(XRD) and thermogravimetric analysis(TGA). The effect of BSN on the structure and properties of BSN/KGM aerogels was also studied. The results showed that the BSN/KGM aerogels possessed network porous structure with compact and homogeneous porosity, high specific surface area and low density. With the increase of BSN, the sheet structure of aerogels was converted into the 3D porous network structure, which contributes significantly higher thermal stability. In addition, the BSN/KGM aerogels showed excellent mechanical properties. The maximum relative compression rate was 62%, suggesting the addition of BSN can enhance the compression properties of the BSN/KGM aerogels.展开更多
[Objectives] This study was conducted to investigate the feasibility of using modified peanut dietary fiber as a functional food ingredient. [Methods]Using peanut shells as a test material,the process parameters of so...[Objectives] This study was conducted to investigate the feasibility of using modified peanut dietary fiber as a functional food ingredient. [Methods]Using peanut shells as a test material,the process parameters of soluble dietary fiber( SDF) modified by extrusion and expansion were studied,and the functional and structural characteristics of SDF before and after modification were discussed. [Results] The optimum conditions were as follows: screw speed 200 rpm,temperature 130 ℃ and moisture content 20 %,and the SDF extraction yield was 22. 3%. The modified SDF showed BCmax values of( 378. 5 ± 5. 3),( 278. 3 ± 3. 2)and( 167. 2 ± 2. 5) μmol/g and BCmin of( 30. 4 ± 1. 3),( 63. 4 ± 3. 7) and( 71. 3 ± 4. 2) μmol/L,for Pb,As and Cu,respectively,indicating that the adsorption to the three heavy metals was enhanced. The modified SDF had a porous network like honeycomb and swelled structure. [Conclusions]Therefore,it is feasible to modify SDF by extrusion and expansion.展开更多
Based on the first-order shear deformation theory,a 3-node co-rotational triangular finite element formulation is developed for large deformation modeling of non-smooth,folded and multi-shell laminated composite struc...Based on the first-order shear deformation theory,a 3-node co-rotational triangular finite element formulation is developed for large deformation modeling of non-smooth,folded and multi-shell laminated composite structures.The two smaller components of the mid-surface normal vector of shell at a node are defined as nodal rotational variables in the co-rotational local coordinate system.In the global coordinate system,two smaller components of one vector,together with the smallest or second smallest component of another vector,of an orthogonal triad at a node on a non-smooth intersection of plates and/or shells are defined as rotational variables,whereas the two smaller components of the mid-surface normal vector at a node on the smooth part of the plate or shell(away from non-smooth intersections)are defined as rotational variables.All these vectorial rotational variables can be updated in an additive manner during an incremental solution procedure,and thus improve the computational efficiency in the nonlinear solution of these composite shell structures.Due to the commutativity of all nodal variables in calculating of the second derivatives of the local nodal variables with respect to global nodal variables,and the second derivatives of the strain energy functional with respect to local nodal variables,symmetric tangent stiffness matrices in local and global coordinate systems are obtained.To overcome shear locking,the assumed transverse shear strains obtained from the line-integration approach are employed.The reliability and computational accuracy of the present 3-node triangular shell finite element are verified through modeling two patch tests,several smooth and non-smooth laminated composite shells undergoing large displacements and large rotations.展开更多
A novel core-shell structure Ag@Al2O3 nano-particles were synthesized and doped into polyimide as conductive fillers to prepare the composite films with high dielectric properties and low dielectric loss. The morpholo...A novel core-shell structure Ag@Al2O3 nano-particles were synthesized and doped into polyimide as conductive fillers to prepare the composite films with high dielectric properties and low dielectric loss. The morphology and structures of the Ag@Al2O3 nano-particles were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and UV-visible spectroscopy. All the results proved that the Ag@Al2O3 nano-parficles had a typical core-shell structure, for the Ag particles were coated by Al2O3 shell and the average sizes ofAg@Al2O3 particles were between 30 to 150 nm. The as-prepared Ag@Al2O3 nanoparticles were doped into the polyimide with different mass fractions to fabricate the Ag@Al2O3/PI composite films via in-situ polymerization process. SEM analysis of composite films showed that the Ag@Al2O3 nano- particles homogeneously dispersed in polyimide matrix with nanoseale. As dielectric materials for electronic packaging systems, the Ag@Al2O3/PI composites exhibited appropriate mechanical properties and erthaneed dielectric properties, including greatly enhanced dielectric constant and just a slight increase in dielectric loss. These improvements were attributed to the core-shell structure of fillers and their fine dispersion in the PI matrix.展开更多
The colloidal Au core/Ag shell structure composite nanoparticles were synthesized in PEG-acetone solution by photochemical route. The monodispersed Au nanoparticles with average diameter of 3.9 nm were used as growth ...The colloidal Au core/Ag shell structure composite nanoparticles were synthesized in PEG-acetone solution by photochemical route. The monodispersed Au nanoparticles with average diameter of 3.9 nm were used as growth seeds. The optical property of colloids and the sizes of composite nanoparticles were characterized when the molar ratio of Au to Ag ranges from 4∶1 to 1∶4. The results show that a composite nanoparticle structure similar to strawberry shape is formed at the molar ratio of Au to Ag from 4∶1 to 1∶1; the composite nanoparticles consisting of a core of Au and shell of Ag were generated at the 1∶4 molar ratio, having a striking feature of forming (interconnected) network structure.展开更多
Fine-grained BaTiO3-based X7R ceramic materials were prepared and the effects of milling process on the core-shell structures and dielectric properties were investigated using scanning electron microscope, transmissio...Fine-grained BaTiO3-based X7R ceramic materials were prepared and the effects of milling process on the core-shell structures and dielectric properties were investigated using scanning electron microscope, transmission electron microscope, and energy dispersive spectroscopy (EDS). As the milling time extends, the dielectric constant of the ceramics increases, whereas the temperature coefficient of capacitance at 125℃ drops quickly. The changes in dielectric properties are considered relevant to the microstructure evolution caused by the milling process. Defects on the surface of BaTiO3 particles increase because of the effects of milling process, which will make it easier for additives to diffuse into the interior grains. As the milling time increases, the shell region gets thicker and the core region gets smaller; however, EDS results show that the chemical inhomogeneity between grain core and grain shell becomes weaker.展开更多
Co@Au core shell nanoparticles(NPs) of different shell thicknesses were fabricated by a combination of the displacement process and the reduction-deposition process in a microfluidic reactor. The effect of the shell t...Co@Au core shell nanoparticles(NPs) of different shell thicknesses were fabricated by a combination of the displacement process and the reduction-deposition process in a microfluidic reactor. The effect of the shell thickness on the fine structures(local atom arrangement) of core materials was investigated by X-ray Absorption Near Edge Structure(XANES) and Extended X-ray Absorption Fine Structure(EXAFS).The results indicate that the shell thickness affects the fine structure of the core materials by causing atomic re-arrangement between the hexagonal close pack(hcp) and the face centered cubic(fcc) structure, and forming Co-Au bonds in the core-shell interface.展开更多
基金supported by the National Key R&D Program of China(Grant Number 2020YFB1708300)China National Postdoctoral Program for Innovative Talents(Grant Number BX20220124)+1 种基金China Postdoctoral Science Foundation(Grant Number 2022M710055)the New Cornerstone Science Foundation through the XPLORER PRIZE,the Knowledge Innovation Program of Wuhan-Shuguang,the Young Top-Notch Talent Cultivation Program of Hubei Province and the Taihu Lake Innovation Fund for Future Technology(Grant Number HUST:2023-B-7).
文摘Cellular thin-shell structures are widely applied in ultralightweight designs due to their high bearing capacity and strength-to-weight ratio.In this paper,a full-scale isogeometric topology optimization(ITO)method based on Kirchhoff-Love shells for designing cellular tshin-shell structures with excellent damage tolerance ability is proposed.This method utilizes high-order continuous nonuniform rational B-splines(NURBS)as basis functions for Kirchhoff-Love shell elements.The geometric and analysis models of thin shells are unified by isogeometric analysis(IGA)to avoid geometric approximation error and improve computational accuracy.The topological configurations of thin-shell structures are described by constructing the effective density field on the controlmesh.Local volume constraints are imposed in the proximity of each control point to obtain bone-like cellular structures.To facilitate numerical implementation,the p-norm function is used to aggregate local volume constraints into an equivalent global constraint.Several numerical examples are provided to demonstrate the effectiveness of the proposed method.After simulation and comparative analysis,the results indicate that the cellular thin-shell structures optimized by the proposed method exhibit great load-carrying behavior and high damage robustness.
基金supported by Jinan Mingzhu Co., Ltd (HX20200364)。
文摘Hollow core-shell structure nanomaterials have been broadly used in energy storage, catalysis, reactor,and other fields due to their unique characteristics, including the synergy between different materials,a large specific surface area, small density, large charge carrying capacity and so on. However, their synthesis processes were mostly complicated, and few researches reported one-step encapsulation of different valence states of precious metals in carbon-based materials. Hence, a novel hollow core-shell nanostructure electrode material, RuO_(2)@Ru/HCs, with a lower mass of ruthenium to reduce costs was constructed by one-step hydrothermal method with hard template and co-assembled strategy, consisting of RuO_(2) core and ruthenium nanoparticles(Ru NPs) in carbon shell. The Ru NPs were uniformly assembled in the carbon layer, which not only improved the electronic conductivity but also provided more active centers to enhance the pseudocapacitance. The RuO_(2) core further enhanced the material’s energy storage capacity. Excellent capacitance storage(318.5 F·g^(-1)at 0.5 A·g^(-1)), rate performance(64.4%) from 0.5 A·g^(-1)to 20 A·g^(-1), and cycling stability(92.3% retention after 5000 cycles) were obtained by adjusting Ru loading to 0.92%(mass). It could be attributed to the wider pore size distribution in the micropores which increased the transfer of electrons and protons. The symmetrical supercapacitor device based on RuO_(2)@Ru/HCs could successfully light up the LED lamp. Therefore, our work verified that interfacial modification of RuO_(2) and carbon could bring attractive insights into energy density for nextgeneration supercapacitors.
基金National Natural Science Foundation of China Under Grand No.50778006Funding Project for Academic Human Resources Development in Institutions of Higher Learning Under the Jurisdiction of Beijing Municipality
文摘A theoretical model of a friction pendulum system (FPS) is introduced to examine its application for the seismic isolation of spatial lattice shell structures. An equation of motion of the lattice shell with FPS bearings is developed. Then, seismic isolation studies are performed for both double-layer and single-layer lattice shell structures under different seismic input and design parameters of the FPS. The influence of frictional coefficients and radius of the FPS on seismic performance are discussed. Based on the study, some suggestions for seismic isolation design of lattice shells with FPS bearings are given and conclusions are made which could be helpful in the application of FPS.
基金supported by the National Natural Science Foundation of China (Grants 11072009, 11172013)the Beijing Education Committee Development Project (Grant SQKM2016100 05001)the Beijing University of Technology Basic Research Fund (Grant 001000514313003)
文摘The purpose of the present work is to study the buckling problem with plate/shell topology optimization of orthotropic material. A model of buckling topology optimization is established based on the independent, continuous, and mapping method, which considers structural mass as objective and buckling critical loads as constraints. Firstly, composite exponential function (CEF) and power function (PF) as filter functions are introduced to recognize the element mass, the element stiffness matrix, and the element geometric stiffness matrix. The filter functions of the orthotropic material stiffness are deduced. Then these filter functions are put into buckling topology optimization of a differential equation to analyze the design sensitivity. Furthermore, the buckling constraints are approximately expressed as explicit functions with respect to the design variables based on the first-order Taylor expansion. The objective function is standardized based on the second-order Taylor expansion. Therefore, the optimization model is translated into a quadratic program. Finally, the dual sequence quadratic programming (DSQP) algorithm and the global convergence method of moving asymptotes algorithm with two different filter functions (CEF and PF) are applied to solve the optimal model. Three numerical results show that DSQP&CEF has the best performance in the view of structural mass and discretion.
基金supported by the National Natural Science Foundation of China (Grant Nos. 21671085, 21473081, 21201088)the Natural Science Foundation of Jiangsu Province (BK20161160)the Qing Lan Project and the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Non-spherical Cu@Cu S yolk–shell structures are successfully obtained using Cu_2 O cube templates in a process combining rapid surface sulfidation followed by disproportionation of the Cu_2 O core upon treatment with a hydrochloric acid solution. By employing the above method,Cu@Cu S yolk–shell structures with different morphologies,including octahedral, truncated octahedral, and cuboctahedral shapes, can be synthesized. The void space within the hollow structures provides a unique confined space, where the metallic copper present in the core of a shell can be protected from agglomeration and oxidation. Furthermore,the presence of metal copper in these hollow structurescontributes to improvement in the photocatalytic properties of these materials. The application of these Cu@Cu S structures indeed shows clearly improved photocatalytic performance.
基金World Premier International Research Center Initiative(WPI Initiative)on Materials Nanoarchitronics,MEXT,Japanthe Japan Society for the Promotion of Science (JSPS)for a support in the form of a fellowship tenable at the National Institute for Materials Science,Tsukuba,Japan.
文摘A focus of the current nanotechnology has shifted from routine fabrication of nanostructures to designing functional electronic devices and realizing their immense potentials for applications. Due to infusion of multi-functionality into a single system, the utilization of hetero-, core/shell and hierarchical nanostructures has become the key issue for building such devices. ZnS, due to its direct wide bandgap, high index of refraction, high transparency in the visible range and intrinsic polarity, is one of the most useful semiconductors for a wide range of electronics applications. This article provides a dense review of the state-of-the-art research activities in one-dimensional (1D) ZnS-based hetero-, core/shell and hierarchical nanostructures. The particular emphasis is put on their syntheses and applications.
基金National Natural Science Foundation of China Under Grant No. 50878010
文摘Reticulated shell structures (RSSs) are characterized as cyclically periodic structures. Mistuning of RSSs will induce structural mode localization. Mode localization has the following two features: some modal vectors of the structure change remarkably when the values of its physical parameters (mass or stiffness) have a slight change; and the vibration of some modes is mainly restricted in some local areas of the structure. In this paper, two quantitative assessment indexes are introduced that correspond to these two features. The first feature is studied through a numerical example of a RSS, and its induced causes are analyzed by using the perturbation theory. The analysis showed that internally, mode localization is closely related to structural frequencies and externally, slight changes of the physical parameters of the structure cause instability to the RSS. A scaled model experiment to examine mode localization was carried out on a Kiewit single-layer spherical RSS, and both features of mode localization are studied. Eight tests that measured the changes of the physical parameters were carried out in the experiment. Since many modes make their contribution in structural dynamic response, six strong vibration modes were tested at random in the experimental analysis. The change and localization of the six modes are analyzed for each test. The results show that slight changes to the physical parameters are likely to induce remarkable changes and localization of some modal vectors in the RSSs.
基金supported by National Program on Key Basic Research Project (973 Program) No. 2013CB933301National Natural Science Foundation of China No. 51272038 and 61474015
文摘Lithium-ion batteries(LIBs) and sodium-ion batteries(SIBs) have received much attention in energy storage system. In particular, among the great efforts on enhancing the performance of LIBs and SIBs, yolk–shell(YS) structured materials have emerged as a promising strategy toward improving lithium and sodium storage. YS structures possess unique interior void space, large surface area and short diffusion distance, which can solve the problems of volume expansion and aggregation of anode materials, thus enhancing the performance of LIBs and SIBs. In this review, we present a brief overview of recent advances in the novel YS structures of spheres, polyhedrons and rods with controllable morphology and compositions. Enhanced electrochemical performance of LIBs and SIBs based on these novel YS structured anode materials was discussed in detail.
文摘To fit in with the strict geometrical integrity and ensure dimensionally consistent fabrication of the welded aerospace structures. the low stress no distortion(LSND)welding, a technique for thin materials, was poineered and developed to provide an ininprocess active control of welding distortion. Satisfactory distortion free results were achieved in both welding of jet engine cases of heat-resistance alloys and rocket fuel tanks of aluminuim alloys, and there need no. reworking operations for post-weld distortion correction. Based on the 'static' method a newly developed method for dvnamic in-process control is also discussed in this paper. Both methods provide quanutiative in-process control of incompatible strains in weld zone and low stress no distortion welding results.
基金supported by the National Natural Science Foundation of China(21922501,21871021 and 21521005)the Beijing Natural Science Foundation(2192040)+1 种基金the National Key Research and Development Programme(2017YFA0206804)the Fundamental Research Funds for the Central Universities(XK1802-6 and 479 XK1803-05).
文摘Zinc-air batteries(ZABs)hold tremendous promise for clean and efficient energy storage with the merits of high theoretical energy density and environmental friendliness.However,the performance of practical ZABs is still unsatisfactory because of the inevitably decreased activity of electrocatalysts when assembly into a thick electrode with high mass loading.Herein,we report a hierarchical electrocatalyst based on carbon microtube@nanotube core-shell nanostructure(CMT@CNT),which demonstrates superior electrocatalytic activity for oxygen reduction reaction and oxygen evolution reaction with a small potential gap of 0.678 V.Remarkably,when being employed as air-cathode in ZAB,the CMT@CNT presents an excellent performance with a high power density(160.6 mW cm^−2),specific capacity(781.7 mAhgZn^−1)as well as long cycle stability(117 h,351 cycles).Moreover,the ZAB performance of CMT@CNT is maintained well even under high mass loading(3 mg cm−2,three times as much as traditional usage),which could afford high power density and energy density for advanced electronic equipment.We believe that this work is promising for the rational design of hierarchical structured electrocatalysts for advanced metal-air batteries.
基金supported by China Postdoctoral Science Foundation (No. 2013M532032)National Nature Science Foundation of China (No. 51305329, 51035007)+1 种基金the Doctoral Foundation of Education Ministry of China (No. 20130201120040)the Shaanxi Postdoctoral Scientific research project
文摘It has been challenging to correctly separate the mixed signals into source components when the source number is not known a priori.To reveal the complexity of the measured vibration signals,and provide the priori information for the blind source separation,in this paper,we propose a novel source number estimation based on independent component analysis(ICA)and clustering evaluation analysis,and then carry out experiment studies with typical mechanical vibration signals from a shell structure.The results demonstrate that the proposed ICA based source number estimation performs stably and robustly for the shell structure.
文摘Ark shell Scapharca kagoshimensis is one of the commercially important bivalve resources in East Asia. In Japan, the mass production method for its natural seedlings was developed in the 1880s, and they had been transplanted to an array of the major fishing areas. It has been therefore concerned with its genetic disturbance among not only current but also former fishing areas in Japan. This study was undertaken to ascertain its genetic diversity and population structure in East Asia by means of nucleotide sequence analysis of a 555-bp portion of the mitochondrial DNA COI gene. Of 225 individuals collected from 8 populations and 1 population in Japan and Korea, respectively, a total of 59 haplotypes, including 14 common haplotypes, were found, and Japan and Korea shared 3 common haplotypes. In Japan, the haplotype diversity and nucleotide diversity ranged from 0.65 to 0.93 and from 0.22% to 0.59%, respectively, reflecting relatively high levels of genetic diversity. The values in Korea were determined to be 0.45% and 0.19%, respectively, indicating significantly lower genetic diversity compared with that in Japan. Mismatch distribution analysis and neutrality tests showed a recent history of multiple types of reproduction and signals of demographic change in each population. These results suggest that S. kagoshimensis has experienced rapid population growth or reduction in population size such as a bottleneck in a short period.
基金supported by the National Natural Science Foundation of China(No.31471704)the Scientific Research Foundation of Graduate School of Fujian Agriculture and Forestry University(No.324-1122yb034)
文摘With bamboo shoot shell nanofibers(BSN) and konjac glucomannan(KGM) as precursor materials, the BSN/KGM aerogels were prepared in different proportions by sol-gel method. The surface morphology, microstructure, characteristic functional groups and thermal properties of BSN/KGM aerogels were characterized by scanning electron microscopy(SEM), infrared spectroscopy(IR), X-ray diffraction(XRD) and thermogravimetric analysis(TGA). The effect of BSN on the structure and properties of BSN/KGM aerogels was also studied. The results showed that the BSN/KGM aerogels possessed network porous structure with compact and homogeneous porosity, high specific surface area and low density. With the increase of BSN, the sheet structure of aerogels was converted into the 3D porous network structure, which contributes significantly higher thermal stability. In addition, the BSN/KGM aerogels showed excellent mechanical properties. The maximum relative compression rate was 62%, suggesting the addition of BSN can enhance the compression properties of the BSN/KGM aerogels.
基金Supported by The High-level Talents Program of Hebei Province (A20190-1128)Tangshan Science and Technology Planning Project (19150204E)。
文摘[Objectives] This study was conducted to investigate the feasibility of using modified peanut dietary fiber as a functional food ingredient. [Methods]Using peanut shells as a test material,the process parameters of soluble dietary fiber( SDF) modified by extrusion and expansion were studied,and the functional and structural characteristics of SDF before and after modification were discussed. [Results] The optimum conditions were as follows: screw speed 200 rpm,temperature 130 ℃ and moisture content 20 %,and the SDF extraction yield was 22. 3%. The modified SDF showed BCmax values of( 378. 5 ± 5. 3),( 278. 3 ± 3. 2)and( 167. 2 ± 2. 5) μmol/g and BCmin of( 30. 4 ± 1. 3),( 63. 4 ± 3. 7) and( 71. 3 ± 4. 2) μmol/L,for Pb,As and Cu,respectively,indicating that the adsorption to the three heavy metals was enhanced. The modified SDF had a porous network like honeycomb and swelled structure. [Conclusions]Therefore,it is feasible to modify SDF by extrusion and expansion.
基金This work was supported by National Natural Science Foundation of China under Grant 11672266.
文摘Based on the first-order shear deformation theory,a 3-node co-rotational triangular finite element formulation is developed for large deformation modeling of non-smooth,folded and multi-shell laminated composite structures.The two smaller components of the mid-surface normal vector of shell at a node are defined as nodal rotational variables in the co-rotational local coordinate system.In the global coordinate system,two smaller components of one vector,together with the smallest or second smallest component of another vector,of an orthogonal triad at a node on a non-smooth intersection of plates and/or shells are defined as rotational variables,whereas the two smaller components of the mid-surface normal vector at a node on the smooth part of the plate or shell(away from non-smooth intersections)are defined as rotational variables.All these vectorial rotational variables can be updated in an additive manner during an incremental solution procedure,and thus improve the computational efficiency in the nonlinear solution of these composite shell structures.Due to the commutativity of all nodal variables in calculating of the second derivatives of the local nodal variables with respect to global nodal variables,and the second derivatives of the strain energy functional with respect to local nodal variables,symmetric tangent stiffness matrices in local and global coordinate systems are obtained.To overcome shear locking,the assumed transverse shear strains obtained from the line-integration approach are employed.The reliability and computational accuracy of the present 3-node triangular shell finite element are verified through modeling two patch tests,several smooth and non-smooth laminated composite shells undergoing large displacements and large rotations.
基金Funded by the National Natural Science Foundation of China(No.51177030)the National Key Basic Research Development Plan(No.2012CB723308)the Natural Science Foundation of Heilongjiang Province of China(No.E201224)
文摘A novel core-shell structure Ag@Al2O3 nano-particles were synthesized and doped into polyimide as conductive fillers to prepare the composite films with high dielectric properties and low dielectric loss. The morphology and structures of the Ag@Al2O3 nano-particles were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and UV-visible spectroscopy. All the results proved that the Ag@Al2O3 nano-parficles had a typical core-shell structure, for the Ag particles were coated by Al2O3 shell and the average sizes ofAg@Al2O3 particles were between 30 to 150 nm. The as-prepared Ag@Al2O3 nanoparticles were doped into the polyimide with different mass fractions to fabricate the Ag@Al2O3/PI composite films via in-situ polymerization process. SEM analysis of composite films showed that the Ag@Al2O3 nano- particles homogeneously dispersed in polyimide matrix with nanoseale. As dielectric materials for electronic packaging systems, the Ag@Al2O3/PI composites exhibited appropriate mechanical properties and erthaneed dielectric properties, including greatly enhanced dielectric constant and just a slight increase in dielectric loss. These improvements were attributed to the core-shell structure of fillers and their fine dispersion in the PI matrix.
基金Project(2000E0008Z) supported by Natural Science Foundation of Yunnan Province
文摘The colloidal Au core/Ag shell structure composite nanoparticles were synthesized in PEG-acetone solution by photochemical route. The monodispersed Au nanoparticles with average diameter of 3.9 nm were used as growth seeds. The optical property of colloids and the sizes of composite nanoparticles were characterized when the molar ratio of Au to Ag ranges from 4∶1 to 1∶4. The results show that a composite nanoparticle structure similar to strawberry shape is formed at the molar ratio of Au to Ag from 4∶1 to 1∶1; the composite nanoparticles consisting of a core of Au and shell of Ag were generated at the 1∶4 molar ratio, having a striking feature of forming (interconnected) network structure.
基金supported by the National Science fund for Distinguished Young Scholars (No.50625204)the National Natural Science Foundation of China (Science Fund for Creative Research Groups)(No.50621201)+1 种基金the Major State Basic Research Development Program of China (No.2009CB623301)the National High-Tech Research and Development Program of China (No.2006AA03Z0428), and Samsung Electro-Mechanics Co., Ltd.
文摘Fine-grained BaTiO3-based X7R ceramic materials were prepared and the effects of milling process on the core-shell structures and dielectric properties were investigated using scanning electron microscope, transmission electron microscope, and energy dispersive spectroscopy (EDS). As the milling time extends, the dielectric constant of the ceramics increases, whereas the temperature coefficient of capacitance at 125℃ drops quickly. The changes in dielectric properties are considered relevant to the microstructure evolution caused by the milling process. Defects on the surface of BaTiO3 particles increase because of the effects of milling process, which will make it easier for additives to diffuse into the interior grains. As the milling time increases, the shell region gets thicker and the core region gets smaller; however, EDS results show that the chemical inhomogeneity between grain core and grain shell becomes weaker.
基金support from National Science Foundation of China(NSFC,Grant No.50971010)the Fundamental Research Funds for the Central Universities(YWF-11-03-Q-002)
文摘Co@Au core shell nanoparticles(NPs) of different shell thicknesses were fabricated by a combination of the displacement process and the reduction-deposition process in a microfluidic reactor. The effect of the shell thickness on the fine structures(local atom arrangement) of core materials was investigated by X-ray Absorption Near Edge Structure(XANES) and Extended X-ray Absorption Fine Structure(EXAFS).The results indicate that the shell thickness affects the fine structure of the core materials by causing atomic re-arrangement between the hexagonal close pack(hcp) and the face centered cubic(fcc) structure, and forming Co-Au bonds in the core-shell interface.