Using modified Soil Conservation Service curve number method to simulate the role of forest in flood control in the upper reach of the Tingjiang River in China

To improve flood control efficiency and increase urban resilience to flooding,the impacts of forest type change on flood control in the upper reach of the Tingjiang River(URTR) were evaluated by a modified model based on the Soil Conservation Service curve number(SCS-CN) method. Parameters of the model were selected and determined according to the comprehensive analysis of model evaluation indexes. The first simulation of forest reconstruction scenario,namely a coniferous forest covering 59.35km^2 is replaced by a broad-leaved forest showed no significant impact on the flood reduction in the URTR. The second simulation was added with 61.75km^2 bamboo forest replaced by broad-leaved forest,the reduction of flood peak discharge and flood volume could be improved significantly. Specifically,flood peak discharge of 10-year return period event was reduced to 7-year event,and the reduction rate of small flood was 21%-28%. Moreover,the flood volume was reduced by 9%-14% and 18%-35% for moderate floods and small floods,respectively. The resultssuggest that the bamboo forest reconstruction is an effective control solution for small to moderate flood in the URTR,the effect of forest conversion on flood volume is increasingly reduced as the rainfall amount increases to more extreme magnitude. Using a hydrological model with scenarios analysis is an effective simulation approach in investigating the relationship between forest type change and flood control. This method would provide reliable support for flood control and disaster mitigation in mountainous cities.

Wave Number Method for Three-Dimensional Steady-State Acoustic Problems

Based on the indirect Trefftz approach, a wave number method （WNM） is proposed to deal with three-dimensional steady-state acoustic problems. In the WNM, the dynamic pressure response variable is approximated by a set of wave functions, which exactly satisfy the Helmholtz equation. The set of wave functions comprise the exact solutions of the homogeneous part of the governing equations and some particular solution functions. The unknown coefficients of the wave functions can be obtained by enforcing the pressure approximation to satisfy the boundary conditions. Compared with the boundary element method （BEM）, the WNM have a smaller system matrix, and is applicable to the radiation problems since the wave functions are independent of the domain size. A 3D acoustic cavity is exemplified to show the properties of the method. The results show that the wave number method is more efficient than the BEM, and it is fairly accurate.

Hydraulic model with roughness coefficient updating method based on Kalman filter for channel flood forecast

A real-time channel flood forecast model was developed to simulate channel flow in plain rivers based on the dynamic wave theory. Taking into consideration channel shape differences along the channel, a roughness updating technique was developed using the Kalman filter method to update Manning＇s roughness coefficient at each time step of the calculation processes. Channel shapes were simplified as rectangles, triangles, and parabolas, and the relationships between hydraulic radius and water depth were developed for plain rivers. Based on the relationship between the Froude number and the inertia terms of the momentum equation in the Saint-Venant equations, the relationship between Manning＇s roughness coefficient and water depth was obtained. Using the channel of the Huaihe River from Wangjiaba to Lutaizi stations as a case, to test the performance and rationality of the present flood routing model, the original hydraulic model was compared with the developed model. Results show that the stage hydrographs calculated by the developed flood routing model with the updated Manning＇s roughness coefficient have a good agreement with the observed stage hydrographs. This model performs better than the original hydraulic model.

Evaluation of the Method Based on Restriction Fragment Length Polymorphism Analysis as Simple Analysis Method of Lactic Acid Bacteria in Foods

Lactic acid bacteria have not only been used to produce various kinds of fermented food, but also used as probiotic products. As lactic acid bacterial group was consisted from diverse genera, a simple inspection method by which numbers and contained microorganisms could be automatically analyzed without any preliminary information was required to use them more effectively. In this manuscript, lactic acid bacterial groups in commercial products of kimuchi, komekouji-miso, and yoghurt were identified and enumerated by our newly developed method [1]-[3], to evaluate whether the method could be used as an inspection method of various food samples. In kimuchi, numerically dominant bacteria were Lactobacillus sakei, and L. casei (1.4 × 104 MPN g-1) and Leuconostoc spp. (l.4 × 104 MPN). In kouji-miso, numerically dominant bacteria was Bacillus spp. (3 × 103 MPN), which mainly included B. subtilis group and B. cereus group. Lactic acid bacteria such as Lactobacillus spp., or Lactococcus spp., included in the komekouji-miso, could be enumerated after 3 days incubation (1.24 × 104 MPN), but not detected after 7 days incubation. In yoghurt A and C, Lactococcus lactis was detected as numerically dominant lactic acid bacteria (3.0 × 105 MPN). In yoghurt B, Lactobacillus spp., or Lactococcus spp., was detected not only by a culturebased method but also by an unculture-based method, although there was a difference between the both estimated numbers. The present results suggested that the method might become useful as a simple inspection method of food microorganisms, because time and labor of the analysis could be reduced by using an unculture-based method and MCE-202 MultiNA. In this study, Bifidobacteriium spp. was not detected in B and C yoghurt, in spite of indicating their existence, and numbers of lactic acid bacteria were lower than the level of the daily product regulation, because 16S rDNA of Bifidobacteriium spp. might not be amplified by the used PCR condition. The PCR condition must be changed so as to amplify Bifidobacterium spp., before the method will be used as an inspection method for lactic acid bacteria.

Identification and Enumeration Method of Both Eukaryotic and Prokaryotic Microorganisms in Food Sample

The method to analyze both eukaryotic and prokaryotic microorganisms without preliminary microbial information of sample seemed to be useful not only for research and investigation of microorganisms but also for industry using microorganisms. In the present manuscript, preparation of a new DNA primers, new reference database for 18S rDNA for our newly developed method [1]- [3], and analyses of eukaryotic and prokaryotic microorganisms in fermentation products were presented. In komekouji, Aspergillus spp., was enumerated to be 46.5 × 106 MPN g-1, and Penicillium spp., was enumerated to be 1.5 × 106 MPN g-1. In dry yeast, Saccharomyces group, were enumerated to be 8600 × 106 MPN g-1. In komekouji-miso, no eukaryotic microorganism was detected, while the other Bacillus spp., was numerically dominant (21.5 × 106 MPN g-1) as prokaryotic microorganisms, followed by B. subtilis group (4.65 × 106 MPN g-1), and the other Firmicutes (3.7 × 106 MPN g-1). The komekouji-miso included lower number of Actinobacteria (0.15 × 106 MPN g-1), Burkhokderia sp. (1.5 × 106 MPN g-1), and the other α,β,γ-proteobacteria (0.12 × 106 MPN g-1). In sake-kasu, both prokaryote and eukaryote were not detected by the method. Present results indicated that using both universal primers for eukaryotic and prokaryotic microorganisms, each groups of prokaryotic and eukaryotic microorganisms were enumerated without any preliminary information nor setting up standard curve, which were required for real time PCR.

A New Evaluation Method for Antibiotic-Resistant Bacterial Groups in Environment

In the present manuscript it was presented whether spreading of antibiotic resistant bacterial groups in environment could be monitored by our newly developed method by enumerating antibiotic resistant bacterial groups in various biological wastes and composts. Although the numbers were not so high, diverse kinds of colistin resistant bacteria (25 mg·L-1) were included in row cattle feces (1.78 × 104 MPN g-1) and cattle feces manure (>3.84 × 104 MPN g-1). Compost originated from leftover food (>44.8 × 104 MPN g-1) and shochu lee (>320 × 104 MPN g-1) included higher numbers of chlortetracycline resistant Pseudomonas sp., (25 mg·L-1), and row cattle feces included higher numbers of chlortetracycline resistant Enterobacteriacea (15.7 × 104 MPN g-1), which mostly consisted from Pantoea sp. or Xenorhobdus doucetiae. Numbers of multi drug resistant bacteria, resistant to 25 mg·L-1 of ciprofloxacin, streptomycin, chloramphenicol, and ampicillin, were the highest in row cattle feces (>143.6 × 104 MPN g-1), followed by cattle feces manure (4.19 × 104 MPN g-1), and shochu lee (0.36 × 104 MPN g-1), which included diverse kinds of bacterial group. The present results indicated that higher numbers of multi drug resistant bacteria were typically found in row cattle feces, and the method was found suitable to enumerate and identify them. These results suggested that the method might become their environmental risk evaluation method.

Analysis of Cavitation Performance of a 2-D Hydrofoil Based on Mixed-iterative Method

In order to study cavitation characteristics of a 2-D hydrofoil, the method that combines nonlinear cavitation model and mixed-iteration is used to predict and analyze the cavitation performance of hydrofoils. The cavitation elements are nonlinearly disposed based on the Green formula and perturbation potential panel method. At the same time, the method that combines cavity shape for fixed cavity length （CSCL） iteration and cavity shape for fixed cavitation number （CSCN） iteration is used to work out the thickness and length of hydrofoil cavitations. Through analysis of calculation results, it can be concluded that the jump of pressure and velocity potentially exist between cavitation end area and non-cavitations area on suction surface when cavitation occurs on hydrofoil. In certain angles of attack, the cavitation number has a negative impact on the length of cavitations. And under the same angle of attack and cavitation number, the bigger the thickness of the hydrofoil, the shorter the cavitations length.

Hilbert’s First Problem and the New Progress of Infinity Theory

In the 19th century, Cantor created the infinite cardinal number theory based on the “1-1 correspondence” principle. The continuum hypothesis is proposed under this theoretical framework. In 1900, Hilbert made it the first problem in his famous speech on mathematical problems, which shows the importance of this question. We know that the infinitesimal problem triggered the second mathematical crisis in the 17-18th centuries. The Infinity problem is no less important than the infinitesimal problem. In the 21st century, Sergeyev introduced the Grossone method from the principle of “whole is greater than part”, and created another ruler for measuring infinite sets. The discussion in this paper shows that, compared with the cardinal number method, the Grossone method enables infinity calculation to achieve a leap from qualitative calculation to quantitative calculation. According to Grossone theory, there is neither the largest infinity and infinitesimal, nor the smallest infinity and infinitesimal. Hilbert’s first problem was caused by the immaturity of the infinity theory.

Physical Properties of the Function and Number of Empirical Macrohardness of the Material: Universal Physical Unit of Measurement of Macro Hardness (Part 2)

Results of analytical studies of the physical properties of the function and number of empirical macrohardness based on the standard experimental force diagram of kinetic macroindentation by a sphere.An analytical comparison method and a criterion for the similarity of the physical and empirical macrohardness of a material are proposed.The physical properties of the hardness measurement process using the Calvert-Johnson method are shown.The physical reasons for the size effect when measuring macrohardness are considered.The universal physical unit and standard of macrohardness of kinetic macroindentation by a sphere is substantiated.

Quantum Solitons and Localized Modes in a One-Dimensional Lattice Chain with Nonlinear Substrate Potential

In the classical lattice theory, solitons and localized modes can exist in many one-dimensional nonlinear lattice chains, however, in the quantum lattice theory, whether quantum solitons and localized modes can exist or not in the one-dimensional lattice chains is an interesting problem. By using the number state method and the Hartree approximation combined with the method of multiple scales, we investigate quantum solirons and localized modes in a one-dimensional lattice chain with the nonlinear substrate potential. It is shown that quantum solitons do exist in this nonlinear lattice chain, and at the boundary of the phonon Brillouin zone, quantum solitons become quantum localized modes, phonons are pinned to the lattice of the vicinity at the central position j = j0.

Joint probability density function of the stochastic responses of nonlinear structures

The joint probability density fimction （PDF） of different structural responses is a very important topic in the stochastic response analysis of nonlinear structures. In this paper, the probability density evolution method, which is successfully developed to capture the instantaneous PDF of an arbitrary single response of interest, is extended to evaluate the joint PDF of any two responses. A two-dimensional partial differential equation in terms of the joint PDF is established. The strategy of selecting representative points via the number theoretical method and sieved by a hyper-ellipsoid is outlined. A two-dimensional difference scheme is developed. The free vibration of an SDOF system is examined to verify the proposed method, and a flame structure exhibiting hysteresis subjected to stochastic ground motion is investigated. It is pointed out that the correlation of different responses results from the fact that randomness of different responses comes from the same set of basic random parameters involved. In other words, the essence of the probabilistic correlation is a physical correlation.

Two-vibron bound states in the β-Fermi-Pasta-Ulam model

This paper studies the two-vibron bound states in the β- Fermi Pasta-Ulam model by means of the number conserving approximation combined with the number state method. The results indicate that on-site, adjacent-site and mixed two-vibron bound states may exist in the model. Specially, wave number has a significant effect on such bound states, which may be considered as the quantum effects of the localized states in quantum systems.

A Simple Evaluation System for Microbial Property in Soil and Manure

Analyses of microbial properties in soil and manure had always included the problem that there was no available standard method to evaluate microbial property. The one of the major problems was the vast diversity and the enormous population of soil microorganisms [1], the other was an existence of numerically dominant unculturable microorganisms which comprise 99% of soil habitat [2]. We evaluated whether our newly developed method, by which taxonomies and their number of each bacterial groups were estimated, could be used as evaluation method of microbial properties of soils and manures. In the forest soil, β-Proteobacteria, which included Burkholderia sp., Ralstonia sp., and Alcaligenes sp., was numerically dominant bacteria (3.64 × 106 MPN g-1 dry soil), followed by γ-Proteobacteria (1.32 × 106 MPN), δ-Proteobacteria (0.006 × 106 MPN), and the other gram negative bacteria (0.006 × 106 MPN). In the commercial manure, Actinobacteria, which included Streptoverticillium salmonis, Mycrococcus sp., Streptomyces bikiniensis, and Microbacterium ulmi, was numerically dominant bacterial group (30.8 × 106 MPN), followed by α-Proteobacteria (26.0 × 106 MPN), β-Proteobacteria (17.1 × 106 MPN), δ-Proteobacteria (11.2 × 106 MPN), the other Firmicutes (1.71 × 106 MPN), γ-Proteobacteria (0.5 × 106 MPN), and the other gram negative bacteria (0.05 × 106 MPN). In the upland field, the other Firmicutes, which included Paenibacillus sp., was numerically dominant bacteria (4.41 × 106 MPN), followed by Actinobacteria (2.14 × 106 MPN), Bacillus sp. (2.14 × 106 MPN), and γ-Proteobacteria (0.35 × 106 MPN). Although the precision of the affiliations became lower because of higher diversity of samples and the number of some Antinobacteria and Firmicutes might be underestimated by the used PCR condition, the method was found suitable as a candidate of a new evaluation system of soil and manure.

Study of evolution forecast of the area of the Huanghe River mouth

From 1979 to 1989, the current Qingshuigou course of the Huanghe River formed a sub - delta which resembles a beak extending into the Laizhou Bay. It covers 618 km2 in area. To meet the needs of developing and constructing the Huanghe River Delta and under the presupposition of keeping the current course for 15-20 a, we forecast mainly by using the OM (1, 1) model that the front border of the sub-delta will be close to 119°30'E and its area will become 923 km2by the end of the year 2000. The Huanghe River will make land 760 km2 in area.

The Kinematics Analysis of Heald Selecting Mechanism of Rotary Electronic Dobby

In order to improve the reliability of the mechanical movement of the rotary electronic dobby, the kinematics analysis of the heald selection mechanism is carried out and the simulation is carried out with Matlab. Firstly, the operation mechanism of the heald selection mechanism is analyzed in detail. The conjugate cam is mapped. The cam profile curve is fitted with cubic spline interpolation. Secondly, based on the overall analysis method and the complex vector method, the kinematics analysis of the key components after the high pair low generation is performed, and the angular displacement and angular velocity of each component are calculated with the rotation of the active cam. Finally, the movement curve diagram is drawn with Matlab, which lays the foundation for the dynamic analysis and in-depth study of the selection mechanism in the future.

SPECTRAL METHOD FOR FLUID FLOW WITH LOW MACH NUMBER

The fluid flow with low Mach numberm is governed by the following differential eqnations:

Diurnal variations of the planetary boundary layer height estimated from intensive radiosonde observations over Yichang, China

By using the eight-times-daily sampling data from an intensive radiosonde observation campaign at Yichang(111°18′E,30°42′N),China in August 2006 and January 2007,the diurnal variation of the planetary boundary layer height determined by using a bulk Richardson(Ri)number approach,was studied in this paper.It was found that the boundary layer heights in both summer and winter months showed diurnal changes and the daily cycle was deeper in summer,which agreed well with the previous studies;the monthly averaged height was 103–1112 m and 89–450 m in summer and winter,respectively;the morning rise began at 0700 LT/1000 LT in summer/winter and the evening transition occurred at 1900 LT in both seasons;the maximum height occurred in the afternoon for most cases,except some peaks found in the winter night;the surface temperature and relative humidity dominated the variations of summer height,while the diurnal variation shown in January 2007 might have some connections with the dynamical processes in the lower troposphere,besides the surface effects.

ON EVALUATING THE RUN LENGTH PROPERTIES OF CHARTS WITH ESTIMATED CONTROL LIMITS

X charts with estimated control limits are commonly used in practice and treated as if the in-control process parameters were known. However, the former can behave quite differently from the latter. To understand the differences, it is necessary to study the run length distribution (RLD), its mean (ARL) and standard deviation (SDRL) of the X charts when the control limits are estimated. However, ARL and SDRL are integrals over an infinite region with a boundless integrand, the finiteness has not been proved in literature. In this paper, we show the finiteness and uniform integrability of ARL and SDRL. Furthermore, we numerically evaluate the ARL, SDRL and the RLD using number theory method. A numerical study is conducted to assess the performance of the proposed method and the results are compared with those given by Quesenberry and Chen.

Numerical investigation of Reynolds number and scaling effects in microchannels flows

Compared with conventional channels, experiments of microchannel often exhibit some controversial findings and sometimes even opposite trends, most notably the effects of the Reynolds number and the scaled channel height on the Poiseuille number. The experimental method has still been constrained by two key facts, firstly the current ability to machine microstructures and secondly the limitation of measurement of parameters related to the Poiseuille number. As a consequence, numerical method was adopted in this study in order to analyze a flow in two-dimensional rectangular microchannels using water as working fluid. Results are obtained by the solution of the steady laminar incompressible Navier-Stokes equations using control volume finite element method（CVFEM） without pressure correction. The computation was made for channel height ranging from 50 ？m to 4.58 ？m and Reynolds number varying from 0.4 to 1 600. The effect of Reynolds number and channel heights on flow characteristics was investigated. The results showed that the Poiseuille numbers agree fairly well with the experimental measurements proving that there is no scale effect at small channel height. This scaling effect has been confirmed by two additional simulations being carried out at channel heights of 2.5 ？m and 0.5 ？m, respectively and the range of Reynolds number was extended from 0.01 up to 1 600. This study confirm that the conventional analysis approach can be employed with confidence for predicting flow behavior in microchannels when coupled with carefully matched entrance and boundary conditions in the dimensional range considered here.

A NOTE ON INTERPOLATION OF A CERTAIN CLASS OF FUNCTIONS

In the present paper the approximate functions for certain periodic functions of several variables are constructed by means of the number-theoretic method.