To analyze the effects of a time-varying viscosity on the penetration length of grouting,in this study cement slur-ries with varying water-cement ratios have been investigated using the Bingham’sfluidflow equation and ...To analyze the effects of a time-varying viscosity on the penetration length of grouting,in this study cement slur-ries with varying water-cement ratios have been investigated using the Bingham’sfluidflow equation and a dis-crete element method.Afluid-solid coupling numerical model has been introduced accordingly,and its accuracy has been validated through comparison of theoretical and numerical solutions.For different fracture forms(a single fracture,a branch fracture,and a fracture network),the influence of the time-varying viscosity on the slurry length range has been investigated,considering the change in the fracture aperture.The results show that under different fracture forms and the same grouting process conditions,the influence of the time-varying viscosity on the seepage length is 0.350 m.展开更多
On the basis of improving the algorithm of the mixing length in and above forest canopies, a PBL numerical model including the multi-layer, heterogeneous vegetation is developed. Simulations indicate thatdifferent tre...On the basis of improving the algorithm of the mixing length in and above forest canopies, a PBL numerical model including the multi-layer, heterogeneous vegetation is developed. Simulations indicate thatdifferent treatments of mixing length can make a great difference in the wind field especially for dense forest.and results fi.om the improved mixing length scheme are in better agreement with observations than thosefrom the original scheme. It may be expected that the improved mixing length scheme can lead to more rational turbulent transfer than the original one. From the sensitivity experiments, we obtain the characteristics of both wind and temperature profiles in and above plant canopies, e.g., during the daytime, a stablethermal stratitication exists near the surface in the canopies, but a neutral or slightly unstable condition appears above plant canopies. while at night the reverse situations occur; the increase of the temperature of thedense-forest case is less than that of the sparse-forest case, the windspeed is reduced within the canopy layer and the large wind shear occurs near the treetop, etc.展开更多
This study deals with the general numerical model to simulate the two-dimensional tidal flow, flooding wave (long wave) and shallow water waves (short wave). The foundational model is based on nonlinear Boussinesq equ...This study deals with the general numerical model to simulate the two-dimensional tidal flow, flooding wave (long wave) and shallow water waves (short wave). The foundational model is based on nonlinear Boussinesq equations. Numerical method for modelling the short waves is investigated in detail. The forces, such as Coriolis forces, wind stress, atmosphere and bottom friction, are considered. A two-dimensional implicit difference scheme of Boussinesq equations is proposed. The low-reflection outflow open boundary is suggested. By means of this model,both velocity fields of circulation current in a channel with step expansion and the wave diffraction behind a semi-infinite breakwater are computed, and the results are satisfactory.展开更多
The notion of ratio of width to length is proposed to describe the shaping feature of molten pool of twin-Arc submerged arc welding accurately, and analyze the law of molten pool variation and weld formation. The temp...The notion of ratio of width to length is proposed to describe the shaping feature of molten pool of twin-Arc submerged arc welding accurately, and analyze the law of molten pool variation and weld formation. The temperature field finite element numerical simulation model of twin arc movement is established. The loading form of twin-arc with double ellipsoid heat source is discussed. The molten pool temperature field of twin-arc submerged arc welding is calculated and analyzed under different process parameters. The law of molten pool characteristics influenced by the welding speed, current and voltage of twin-arc submerged arc welding parameters is analyzed. The relation between shaping feature of molten pool and weld formation is discussed according to the ratio of width to length. The results manifested that the width to length ratio of weld pool decreases with the improvement of welding speed, which result in gene- ration of weld defects. The width to length ratio of weld pool is increased by adjusting the proportion of the current, voltage and the distance of the two arcs, which avoids the generation of weld defects.展开更多
Based on finite volume method, subsonic and transonic flow in 3-D cavity of different length-to-depth ratios are numerically investigated by using Navier-Stokes equations with k-ε SST two-equation turbulence model an...Based on finite volume method, subsonic and transonic flow in 3-D cavity of different length-to-depth ratios are numerically investigated by using Navier-Stokes equations with k-ε SST two-equation turbulence model and coupled implicit algorithm. The cavity streamline patterns and the static pressure coefficient distributions on the cavity floor are shown, and the flow characteristics of the cavity and the floor pressure coefficient distributions are analyzed. Numerical results demon- strate that the flow characteristics of the cavity at subsonic and transonic speeds are different from that of supersonic ones; length-to-depth ratio is the main factor that affects the flow characteristics of the cavity at subsonic and transonic number has a neglectable effect on the cavity floor pressure distributions. speeds and causes changes of the cavity flow type; Mach cavity flow fields at subsonic and transonic speeds and the展开更多
依托南通轨道交通1号线孩环区间(孩儿巷站—环城东路站)三线并行小净距盾构隧道工程,采用离散元法(Discrete Element Method,DEM)—有限差分法(Finite Difference Method,FDM)耦合的数值仿真,分析桩基础长度、桩隧距对桩基础变形的影响...依托南通轨道交通1号线孩环区间(孩儿巷站—环城东路站)三线并行小净距盾构隧道工程,采用离散元法(Discrete Element Method,DEM)—有限差分法(Finite Difference Method,FDM)耦合的数值仿真,分析桩基础长度、桩隧距对桩基础变形的影响。结果表明:三线小净距隧道施工会引起邻近桩基沉降;桩底和隧道顶部位于同一深度时,桩基水平位移最大值出现在桩底,桩基变形以倾斜为主;桩底与隧道底部位于同一深度和桩底位于隧道底部以下时桩基水平位移最大值出现在隧道轴线位置,桩基变形以弯曲为主,但桩底位于隧道底部以下时桩基对隧道施工表现出更强的敏感性;三种长度的桩基最大拉应力所在截面靠近隧道一侧和远离隧道一侧拉压应力状态均完全相反;桩长一定时,随桩隧距增大,桩基的沉降、最大水平位移、最大轴向拉应力均减小。展开更多
基金supported by the National Natural Science Foundation of China(Grant Numbers:U22A20234,42277170)the Key Research and Development Project of Hubei Province(Grant Number:2020BCB073).
文摘To analyze the effects of a time-varying viscosity on the penetration length of grouting,in this study cement slur-ries with varying water-cement ratios have been investigated using the Bingham’sfluidflow equation and a dis-crete element method.Afluid-solid coupling numerical model has been introduced accordingly,and its accuracy has been validated through comparison of theoretical and numerical solutions.For different fracture forms(a single fracture,a branch fracture,and a fracture network),the influence of the time-varying viscosity on the slurry length range has been investigated,considering the change in the fracture aperture.The results show that under different fracture forms and the same grouting process conditions,the influence of the time-varying viscosity on the seepage length is 0.350 m.
文摘On the basis of improving the algorithm of the mixing length in and above forest canopies, a PBL numerical model including the multi-layer, heterogeneous vegetation is developed. Simulations indicate thatdifferent treatments of mixing length can make a great difference in the wind field especially for dense forest.and results fi.om the improved mixing length scheme are in better agreement with observations than thosefrom the original scheme. It may be expected that the improved mixing length scheme can lead to more rational turbulent transfer than the original one. From the sensitivity experiments, we obtain the characteristics of both wind and temperature profiles in and above plant canopies, e.g., during the daytime, a stablethermal stratitication exists near the surface in the canopies, but a neutral or slightly unstable condition appears above plant canopies. while at night the reverse situations occur; the increase of the temperature of thedense-forest case is less than that of the sparse-forest case, the windspeed is reduced within the canopy layer and the large wind shear occurs near the treetop, etc.
基金Supported by the Fund of National Nature Sciences of China
文摘This study deals with the general numerical model to simulate the two-dimensional tidal flow, flooding wave (long wave) and shallow water waves (short wave). The foundational model is based on nonlinear Boussinesq equations. Numerical method for modelling the short waves is investigated in detail. The forces, such as Coriolis forces, wind stress, atmosphere and bottom friction, are considered. A two-dimensional implicit difference scheme of Boussinesq equations is proposed. The low-reflection outflow open boundary is suggested. By means of this model,both velocity fields of circulation current in a channel with step expansion and the wave diffraction behind a semi-infinite breakwater are computed, and the results are satisfactory.
文摘The notion of ratio of width to length is proposed to describe the shaping feature of molten pool of twin-Arc submerged arc welding accurately, and analyze the law of molten pool variation and weld formation. The temperature field finite element numerical simulation model of twin arc movement is established. The loading form of twin-arc with double ellipsoid heat source is discussed. The molten pool temperature field of twin-arc submerged arc welding is calculated and analyzed under different process parameters. The law of molten pool characteristics influenced by the welding speed, current and voltage of twin-arc submerged arc welding parameters is analyzed. The relation between shaping feature of molten pool and weld formation is discussed according to the ratio of width to length. The results manifested that the width to length ratio of weld pool decreases with the improvement of welding speed, which result in gene- ration of weld defects. The width to length ratio of weld pool is increased by adjusting the proportion of the current, voltage and the distance of the two arcs, which avoids the generation of weld defects.
文摘Based on finite volume method, subsonic and transonic flow in 3-D cavity of different length-to-depth ratios are numerically investigated by using Navier-Stokes equations with k-ε SST two-equation turbulence model and coupled implicit algorithm. The cavity streamline patterns and the static pressure coefficient distributions on the cavity floor are shown, and the flow characteristics of the cavity and the floor pressure coefficient distributions are analyzed. Numerical results demon- strate that the flow characteristics of the cavity at subsonic and transonic speeds are different from that of supersonic ones; length-to-depth ratio is the main factor that affects the flow characteristics of the cavity at subsonic and transonic number has a neglectable effect on the cavity floor pressure distributions. speeds and causes changes of the cavity flow type; Mach cavity flow fields at subsonic and transonic speeds and the
文摘依托南通轨道交通1号线孩环区间(孩儿巷站—环城东路站)三线并行小净距盾构隧道工程,采用离散元法(Discrete Element Method,DEM)—有限差分法(Finite Difference Method,FDM)耦合的数值仿真,分析桩基础长度、桩隧距对桩基础变形的影响。结果表明:三线小净距隧道施工会引起邻近桩基沉降;桩底和隧道顶部位于同一深度时,桩基水平位移最大值出现在桩底,桩基变形以倾斜为主;桩底与隧道底部位于同一深度和桩底位于隧道底部以下时桩基水平位移最大值出现在隧道轴线位置,桩基变形以弯曲为主,但桩底位于隧道底部以下时桩基对隧道施工表现出更强的敏感性;三种长度的桩基最大拉应力所在截面靠近隧道一侧和远离隧道一侧拉压应力状态均完全相反;桩长一定时,随桩隧距增大,桩基的沉降、最大水平位移、最大轴向拉应力均减小。
