Fluid-solid Interaction Model for Hydraulic Reciprocating O-ring Seals

Elastohydrodynamic lubrication characteristics of hydraulic reciprocating seals have significant effects on sealing and tribology performances of hydraulic actuators, especially in high parameter hydraulic systems. Only elastic deformations of hydraulic reciprocating seals were discussed, and hydrodynamic effects were neglected in many studies. The physical process of the fluid-solid interaction effect did not be clearly presented in the existing fluid-solid interaction models for hydraulic reciprocating O-ring seals, and few of these models had been simultaneously validated through experiments. By exploring the physical process of the fluid-solid interaction effect of the hydraulic reciprocating O-ring seal, a numerical fluid-solid interaction model consisting of fluid lubrication, contact mechanics, asperity contact and elastic deformation analyses is constructed with an iterative procedure. With the SRV friction and wear tester, the experiments are performed to investigate the elastohydrodynamic lubrication characteristics of the O-ring seal. The regularity of the friction coefficient varying with the speed of reciprocating motion is obtained in the mixed lubrication condition. The experimental result is used to validate the fluid-solid interaction model. Based on the model, The elastohydrodynamic lubrication characteristics of the hydraulic reciprocating O-ring seal are presented respectively in the dry friction, mixed lubrication and full film lubrication conditions, including of the contact pressure, film thickness, friction coefficient, liquid film pressure and viscous shear stress in the sealing zone. The proposed numerical fluid-solid interaction model can be effectively used to analyze the operation characteristics of the hydraulic reciprocating O-ring seal, and can also be widely used to study other hydraulic reciprocating seals.

Influence Analysis of Secondary O-ring Seals in Dynamic Behavior of Spiral Groove Gas Face Seals

The current research on secondary O-ring seals used in mechanical seals has begun to focus on their dynamic properties. However, detailed analysis of the dynamic properties of O-ring seals in spiral groove gas face seals is lacking. In particular a transient study and a difference analysis of steady-state and transient performance are imperative. In this paper, a case study is performed to gauge the effect of secondary O-ring seals on the dynamic behavior（steady-state performance and transient performance） of face seals. A numerical finite element method（FEM） model is developed for the dynamic analysis of spiral groove gas face seals with a flexibly mounted stator in the axial and angular modes. The rotor tilt angle, static stator tilt angle and O-ring damping are selected to investigate the effect of O-ring seals on face seals during stable running operation. The results show that the angular factor can be ignored to save time in the simulation under small damping or undamped conditions. However, large O-ring damping has an enormous effect on the angular phase difference of mated rings, affecting the steady-state performance of face seals and largely increasing the possibility of face contact that reduces the service life of face seals. A pressure drop fluctuation is carried out to analyze the effect of O-ring seals on the transient performance of face seals. The results show that face seals could remain stable without support stiffness and O-ring damping during normal stable operation but may enter a large-leakage state when confronting instantaneous fluctuations. The oscillation-amplitude shortening effect of O-ring damping on the axial mode is much greater than that on the angular modes and O-ring damping prefers to cater for axial motion at the cost of angular motion. This research proposes a detailed dynamic-property study of O-ring seals in spiral groove gas face seals, to assist in the design of face seals.

Sealing properties and structure optimization of packer rubber under high pressure and high temperature

During hydraulic fracturing operations of low-permeability reservoirs,packers are the key component to ensure the success of multistage fracturing.Packers enable sections of the wellbore to be sealed off and separately fractured by hydraulic pressure,one at a time,while the remainder of the wellbore is not affected.However,reliable sealing properties of the packer rubber are required to meet the high-pressure and high-temperature(HPHT)conditions of reservoirs(such as 70 MPa and 170 ℃).In this study,the structures of the packer rubber with two different materials are optimized numerically by ABAQUS and validated by experiments.The optimization process starts from the packer rubber with a conventional structure,and then,the weakest spots are identified by ABAQUS and improved by slightly varying its structure.This process is iterative,and the final optimized structure of a single rubber barrel with expanding back-up rings is achieved.For the structure of three rubber barrels with metallic protective covers,both HNBR and AFLAS fail under HPHT conditions.For the final optimized structure,the packer rubber made of AFLAS can work better under HPHT than that made of HNBR which ruptures after setting.The results show that the optimized structure of a single rubber barrel with expanding back-up rings and the material AFLAS are a good combination for the packer rubber playing an excellent sealing performance in multistage fracturing in horizontal wells.

Synergistic Antiflaming of Expandable Graphite on the Sealing Silicone Rubber

To study the effects of different proportions of aluminum hydroxide and expandable graphite （EG） composites on flame retardation, sealing, mechanical, electrical and other properties of RTV- 1, aluminum hydroxide/expandable graphite （ATH/EG） and silicone rubber composites were prepared by the compression molding method. The experimental results show that heat resistance improves with the increase of proportion of EG. Although the resistance coefficient changes, the composite materials still keep good electrical insulating property. Moreover, oxygen index and expansion index rise first then fall. When ATH/EG is 1：1, the oxygen index reaches the highest; the mechanical property of the silicone rubber is not affected under various environments such as acid, alkali, oily, artificial sea water environments, etc.

Characteristics of seal shell body's rubber ring with bionic dimpled surfaces of aerodynamic extinguishing cannon

To solve the problem of sealing between the barrel and the rubber ring of shell body during an launching process of aerodynamic extinguishing cannon, a rubber sealing model with bionic dimpled characteristics was established based on the theory of bionic dimpled drag reduction and the principle of rubber sealing. In condition that the bionic dimpled characteristic diameters were 1, 2, 3, 4, and 5 mm, respectively, by numerical simulation, the influence of the installing compression of the rubber sealing ring on its surface stress and deformation was analyzed, and sealing performance of the rubber ring with different diameters of bionic dimpled was studied. The results show that the deformation of rubber ring appears prominent nonlinear characteristics when compression is increased from 1.5 mm to 2.5 ram. When the compression is 2.5 mm, the equivalent compression stress on the sealing areas of both sides of the rubber seal is greater than the working pressure of aerodynamic extinguishing cannon, which could meet the sealing requirement and would not cause leakage. So the rubber sealing ring with bionic dimpled surface possesses a good sealing characteristic and has no negative effect on the sealing of shell body; When the compression is 2.5 mm, the larger equivalent stress on the edge of sealing ring and the more even stress distribution in the high pressure area are generated due to the smaller compressive stress on the bionic dimple areas, which lays a foundation for the drag reduction characteristics of the shell body＇s rubber ring with bionic dimpled surface.

O-ring橡胶密封圈的耐老化性能研究

通过自然老化、加速老化和介质老化对手表丁腈橡胶O-ring密封圈的耐老化性能进行研究。结果表明,经过40个月常温下自然老化后,O-ring密封圈老化性能未完全失效;在60℃、85℃和100℃三种温度下的加速老化下,24h内对老化性能影响较大,随着加速老化时间的延长,开始进入缓慢老化阶段;其耐盐雾腐蚀性能较好,此外,酒精浸泡30min,对O-ring密封性能无影响。

EXPERIMENTAL STUDY ON THE LOAD DECAY AND ITS EFFECT ON LEAK RATE OFO-RING

Experimental studies on load decay and leak rate of O-rings made of two kindsof silicone rubber are conducted. The results show that the characteristic of load decay isrelative to the material and temperature of O-rings; the rate of load decay increases with the riseof temperature; the effects of load decay on leak rate of O-rings are negligible at roomtemperature, but they are notable at high temperature, and they are related to the material ofO-rings. On the basis of study on the theory of load decay and analysis to the results ofexperiments, a theoretical model is developed to describe the load decay characteristic of O-rings,and it matches the experimental data very well. By the study of time-temperature equivalence of loaddecay, the interconvertting equation of test data of load decay at different temperatures isobtained.

Analysis and optimization of nitrile butadiene rubber sealing mechanism of ball valve

An approach for analyzing and optimizing sealing mechanism of ball valve made of nitrile butadiene rubber(NBR) with finite element method was presented. The Mooney-Rivlin hyperelastic material model was chosen to characterize NBR sealing, as it has been recommended in the similar applications. That is, NBR sealing was modeled as incompressible hyperelasticity, as well as the assumption of isotropic flow. The results illustrate the structural pressure and contact pressure on the contact surface, which shows that the NBR sealing mechanism is very suitable for sealing after dimension optimization.

Study on Production of Rubber Sealing Strips with Steel Bones

Rubber sealing strips with steel bones are used in car manufacturing that produced in large quantities. Cutting processes, such as milling and punching, are needed when the strips are produced. Accuracy, smoothness and flatness of the machined surface have to be guaranteed in the cutting process; moreover, deformation of the steel bone and peeling-off of the rubber must be avoided. Therefore cutting action of rubber/steel strips differs from that of rubber or metal workpiece separately. In this paper, milling and punching of rubber/steel strips were studied with the aim to increase the part quality of a production line for sealing strips of cars. Suitable cutting tools and fixtures are both necessary for cutting of the strips. The teeth of the milling saw should be made knife-edged and the cutting edge of the punching tool be inclined. Fixtures should be used to sustain the workpiece and resist deformation. By using of suitable tools and fixtures, high quality of rubber/steel sealing strips is achieved in the production line.

Experimental study on the failure factors of the O-ring for long-term working

The O-ring in the rotary dynamic sealing system of gas meters should have outstanding long-term sealing performance under the conditions of high and low temperature,which can ensure the safety of gas meters.In this paper,based on the O-ring sealing mechanism,taking the compression set as the main sealing index,a finite element simulation method is used to analyze the failure charac-teristics under different conditions according to the constitutive relation of nitrile rubber.Then,using the orthogonal test method for the O-ring sealing performance index,the main factors which affect the law of long-term test are analysed,and the orthogonal regression mathematical model that can predict the compression set is obtained.Finally,the O-ring is improved according to the model,and the test results show that the performance of the new O-rings with high and low temperature resistance is greatly improved and meets the expected target requirements.

Effect of nitrile butadiene rubber hardness on the sealing characteristics of hydraulic O-ring rod seals

The nitrile butadiene rubber(NBR)hardness effect on the sealing characteristics of hydraulic O-ring rod seals is analyzed based on a mixed lubrication elastohydrodynamic model.Parameterized studies are conducted to reveal the mechanism of the influence of rubber hardness on the static and dynamic behavior of seals.The optimized selections of rubber hardness are then investigated under different conditions.Results show that the low hardness seal is prone to stress concentration due to the extrusion effect under high pressure conditions;it is also more prone to leaking.A high hardness seal can better prevent leakage by reducing film thickness but it will cause large frictional power loss and increase the probability of wear failure.The choice of low hardness is recommended to reduce friction with the premise that leakage requirements are met.

织物增强橡胶基复合材料本构模型及其应用

为更准确地表征织物增强橡胶基复合材料在受力变形过程中的力学性能,针对二维编织物结构,基于连续介质力学将织物增强橡胶基复合材料应变能解耦为橡胶基体应变能、纤维拉伸应变能以及纤维之间相互作用引起的剪切应变能,结合橡胶、织物增强复合材料的单轴拉伸及镜框剪切实验数据拟合得到本构模型参数。通过对织物增强密封带压缩仿真结果与实验数据进行比较,验证了所建立的舱门密封有限元模型的有效性,随后将织物增强橡胶基复合材料超弹性本构模型应用于飞机舱门压缩过程的模拟分析。结果表明:超弹性本构模型能够用于表征织物增强复合材料的各向异性非线性材料行为;经向/纬向纤维与密封带轴向呈0°角铺设方式的密封性能优于45°角铺设,舱门的密封性能与门框的加载量成正比关系。

基于泄漏率的发动机橡胶密封寿命预测研究

以油泵法兰密封结构为研究对象,在有限元力学分析得到密封面接触压力分布的基础上,进一步建立粗糙峰接触模型和平行平板泄漏模型计算密封面的泄漏率。同时通过橡胶加速老化试验建立橡胶性能的时温等效模型,从而预测橡胶的密封寿命,最后通过密封泄漏率台架试验进行验证,试验结果与预测结果基本一致。

Degradation of Silicone Rubbers in Fenton's Reagents

Gaskets are applied in PEMFCs（proton exchange membrane fuel cells） to keep reactant gases and liquid within their respective regions, which are of great significance for the both sealing and electrochemical performance of fuel cells during the long-term operation. In this study, the degradation of silicone rubbers, often selected as seals in PEMFCs, in Fenton＇s reagents with different H_2O_2 concentrations was investigated. The changes in chemical properties, mechanical behavior and surface morphology of the samples were studied before and after exposure to the test environment over time. It is found that increasing H_2O_2 concentration will degrade the rubbers more severely. The experimental results elucidate the degradation mechanism of silicone rubbers in Fenton＇s reagents and the influence of H_2O_2 in the degradation process.

Finite element analysis and experimental study on the sealing performance of low-phenyl silicone rubber sealing rings

Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability and short service life.To address these issues,low-phenyl silicone rubber was prepared and tested,and the finite element analysis and experimental studies on the sealing performance of its sealing rings were carried out.Design/methodology/approach–The low-temperature resistance and thermal stability of the prepared lowphenyl silicone rubber were studied using low-temperature tensile testing,differential scanning calorimetry,dynamic thermomechanical analysis and thermogravimetric analysis.The sealing performance of the lowphenyl silicone rubber sealing ring was studied by using finite element analysis software abaqus and experiments.Findings–The prepared low-phenyl silicone rubber sealing ring possessed excellent low-temperature resistance and thermal stability.According to the finite element analysis results,the finish of the flange sealing surface and groove outer edge should be ensured,and extrusion damage should be avoided.The sealing rings were more susceptible to damage in high compression ratio and/or low-temperature environments.When the sealing effect was ensured,a small compression ratio should be selected,and rubbers with hardness and elasticity less affected by temperature should be selected.The prepared low-phenyl silicone rubber sealing ring had zero leakage at both room temperature(RT)and�508C.Originality/value–The innovation of this study is that it provides valuable data and experience for the future development of the sealing rings used in the brake pipe flange joints of the railway freight cars in China.

Thermal-Mechanical Coupled FE Analysis for Rotary Shaft Seals

The aim of this paper is to model the steady-state condition of a rotary shaft seal (RSS) system. For this, an iterative thermal-mechanical algorithm was developed based on incremental finite element analyzes. The behavior of the seal’s rubber material was taken into account by a large-strain viscoelastic, so called generalized Maxwell model, based on Dynamic Mechanical Thermal Analyses (DMTA) and tensile measurements. The pre-loaded garter spring was modelled with a bilinear material model and the shaft was assumed to be linear elastic. The density, coefficient of thermal expansion and the thermal conductance of the materials were taken into consideration during simulation. The friction between the rotary shaft seal and the shaft was simplified and modelled as a constant parameter. The iterative algorithm was evaluated at two different times, right after assembly and 1 h after assembly, so that rubber material’s stress relaxation effects are also incorporated. The results show good correlation with the literature data, which state that the permissible temperature for NBR70 (nitrile butadiene rubber) material contacting with ~80 mm shaft diameter, rotating at 2600/min is 100°C. The results show 107°C and 104°C for the two iterations. The effect of friction induced temperature, changes the width of the contact area between the seal and the shaft, and significantly reduces the contact pressure.

小行星样品密封设计及验证

中国计划开展探测编号为2016H03的近地小行星并采集样品返回地面,测定小行星样品的物理性质、化学成分与矿物成分,为小行星起源与演化、太阳系的形成与演化过程提供科学依据。针对中国首次近地小行星采样封装任务,设计多种样密封方案,综合考虑密封力、密封面样品颗粒污染物防护等因素,采用双弹性体径向密封方案,并开展密封方案验证工作,通过高温、低温及模拟尘埃污染漏率试验,密封漏率优于5×10^(-6)Pa·m^(3)·s^(-1),满足小行星样品密封要求。

考虑蠕变特性的橡胶微凸体与金属表面接触特性分析

金属-橡胶接触广泛存在于密封结构中,密封接触表面上微凸体间的相互作用会直接影响整个密封界面的接触特性,进而影响其密封性能。基于粗糙密封界面的单个微凸体,考虑橡胶的蠕变特性,采用理论分析和仿真研究相结合的方式研究橡胶微凸体与金属表面的接触特性。通过橡胶蠕变特性的实验结果,构建橡胶蠕变计算模型;构建半球微凸体与金属平板间的有限元模型,进行考虑蠕变特性的仿真,分析其接触特性,并与Hertz接触理论的计算值进行对比。结果表明:在蠕变阶段,接触半径、法向变形量和最大等效蠕变应变均随蠕变时间的增加而增大,最大接触压力随蠕变时间增大而减小,这均可能导致密封性能的下降;随压力载荷的增大,接触半径、法向变形量、最大接触压力和最大等效蠕变应变均增大,但增大的趋势逐渐减小;橡胶微凸体与金属表面间的等效模量随蠕变时间的增加而减小,随压力载荷增大而增大。

油罐车自主加注臂密封圈响应面优化及分析

为了提高油罐车自主加注臂前端快接装置的密封性能,设计了一种内胀式橡胶密封圈,并结合响应面法和有限元法对密封圈进行了优化和分析。首先,基于有限元软件ANSYS Workbench对密封圈进行建模和仿真,研究了密封圈的倒圆半径、厚度和压缩量对密封圈性能的影响;然后,将密封圈与管壁的接触面积、接触压力和所受等效应力作为优化目标,利用Design⁃Expert软件建立了密封结构的优化模型,并通过多目标优化获得最优设计方案;最后,进行了密封圈优化前后的性能对比和分析。数值测试表明,在最大3 MPa介质压力下,优化后密封圈的接触压力提升了1.3 MPa,有效接触面积更大,且接触带更加集中,有利于实现快接装置和油罐车加注口的有效密封,同时等效应力降低了4.3%,有助于延长密封圈的使用寿命。

Y形组合密封的密封性能研究

应用ABAQUS软件建立YO组合密封的有限元模型,分别比较Y形组合密封与Y形密封、聚氨酯和丁腈橡胶2种材料的Y形组合密封,在密封区域的静态接触压力和Mises应力分布,分析O形圈截面直径对2种材料Y形组合密封性能的影响规律。结果表明:Y形组合密封在密封区域的接触压力和Mises应力均大于相同规格、材料的Y形圈,且外行程时Y形组合密封接触压力增大更明显,应力分布更均匀,验证了Y形组合密封的双重密封和改善根部抗撕裂的特性;在O形圈截面直径相同的情况下,聚氨酯组合密封外行程与内行程的最大接触压力差值远远高于丁腈橡胶组合密封,而丁腈橡胶组合密封Mises应力分布更均匀;随着O形圈截面直径的增大,聚氨酯组合密封的最大接触压力呈现先增大后减小的趋势,丁腈橡胶组合密封呈现逐渐减小的趋势,但两者的Mises应力均呈现逐渐增大的趋势,且丁腈橡胶组合密封增大更显著。研究结果为不同工作条件下密封件的选择提供了参考依据。