Atmospheric ammonia(NH_(3)) is a chemically active trace gas that plays an important role in the atmospheric environment and climate change. Satellite remote sensing is a powerful technique to monitor NH_(3) concentra...Atmospheric ammonia(NH_(3)) is a chemically active trace gas that plays an important role in the atmospheric environment and climate change. Satellite remote sensing is a powerful technique to monitor NH_(3) concentration based on the absorption lines of NH_(3) in the thermal infrared region. In this study, we establish a retrieval algorithm to derive the NH_(3)column from the Hyperspectral Infrared Atmospheric Sounder(HIRAS) onboard the Chinese Feng Yun(FY)-3D satellite and present the first atmospheric NH_(3) column global map observed by the HIRAS instrument. The HIRAS observations can well capture NH_(3) hotspots around the world, e.g., India, West Africa, and East China, where large NH_(3) emissions exist. The HIRAS NH_(3) columns are also compared to the space-based Infrared Atmospheric Sounding Interferometer(IASI)measurements, and we find that the two instruments observe a consistent NH_(3) global distribution, with correlation coefficient(R) values of 0.28–0.73. Finally, some remaining issues about the HIRAS NH_(3) retrieval are discussed.展开更多
Three-dimensional(3D) synthetic aperture radar(SAR)extends the conventional 2D images into 3D features by several acquisitions in different aspects. Compared with 3D techniques via multiple observations in elevation, ...Three-dimensional(3D) synthetic aperture radar(SAR)extends the conventional 2D images into 3D features by several acquisitions in different aspects. Compared with 3D techniques via multiple observations in elevation, e.g. SAR interferometry(InSAR) and SAR tomography(TomoSAR), holographic SAR can retrieve 3D structure by observations in azimuth. This paper focuses on designing a novel type of orbit to achieve SAR regional all-azimuth observation(AAO) for embedded targets detection and holographic 3D reconstruction. The ground tracks of the AAO orbit separate the earth surface into grids. Target in these grids can be accessed with an azimuth angle span of360°, which is similar to the flight path of airborne circular SAR(CSAR). Inspired from the successive coverage orbits of optical sensors, several optimizations are made in the proposed method to ensure favorable grazing angles, the performance of 3D reconstruction, and long-term supervision for SAR sensors. Simulation experiments show the regional AAO can be completed within five hours. In addition, a second AAO of the same area can be duplicated in two days. Finally, an airborne SAR data process result is presented to illustrate the significance of AAO in 3D reconstruction.展开更多
3D stereoscopic visualization technology is coming into more and more common use in the field of entertainment,and this technology is also beginning to cut a striking figure in casting industry and scientific research...3D stereoscopic visualization technology is coming into more and more common use in the field of entertainment,and this technology is also beginning to cut a striking figure in casting industry and scientific research.The history,fundamental principle,and devices of 3D stereoscopic visualization technology are reviewed in this paper.The authors’research achievements on the 3D stereoscopic visualization technology in the modeling and simulation of the casting process are presented.This technology can be used for the observation of complex 3D solid models of castings and the simulated results of solidification processes such as temperature,fluid flow,displacement,stress strain and microstructure,as well as the predicted defects such as shrinkage/porosity,cracks,and deformation.It can also be used for other areas relating to 3D models,such as assembling of dies,cores,etc.Several cases are given to compare the illustration of simulated results by traditional images and red-blue 3D stereoscopic images.The spatial shape is observed better by the new method.The prospect of3D stereoscopic visualization in the casting aspect is discussed as well.The need for aided-viewing devices is still the most prominent problem of 3D stereoscopic visualization technology.However,3D stereoscopic visualization represents the tendency of visualization technology in the future;and as the problem is solved in the years ahead,great breakthroughs will certainly be made for its application in casting design and modeling and simulation of the casting processes.展开更多
The understanding of the structure morphology of oil-rich emulsion from enzyme-assisted extraction processing(EAEP)was a critical step to break the oil-rich emulsion structure in order to recover oil.Albeit EAEP metho...The understanding of the structure morphology of oil-rich emulsion from enzyme-assisted extraction processing(EAEP)was a critical step to break the oil-rich emulsion structure in order to recover oil.Albeit EAEP method has been applied as an alternative way to conventional solvent extraction method,the structure morphology of oil-rich emulsion was still unclear.The current study aimed to investigate the structure morphology of oil-rich emulsion from EAEP using 3 D confocal Raman imaging technique.With increasing the enzymatic hydrolysis duration from 1 to 3 h,the stability of oil-rich emulsion was decreased as visualized in the 3 D confocal Raman images that the protein and oil were mixed together.The subsequent Raman spectrum analysis further revealed that the decreased stability of oil-rich emulsion was due to the protein aggregations via SS bonds or protein-lipid interactions.The conformational transfer in protein indicated the formation of a compact structure.展开更多
The 3-D velocity tomography image of the central-eastern part of Qilianshan is obtained by the joint inversion of 3-D velocity structure and focal parameters based on the S-P data of micro-earthquakes recorded by the ...The 3-D velocity tomography image of the central-eastern part of Qilianshan is obtained by the joint inversion of 3-D velocity structure and focal parameters based on the S-P data of micro-earthquakes recorded by the digital seismic network set up for a Sino-French cooperation program since 1996. The inversed velocity structure does primarily reflect some important features of the deep structure in the region and provide the scientific background for the further study of active tectonic structure and the calculation of earthquake parameters.展开更多
This study proposes a parametric formation control method for the cooperative observation of the China Space Station(CSS)using multiple nanosatellites.First,a simplified geometrical model of the CSS is constructed usi...This study proposes a parametric formation control method for the cooperative observation of the China Space Station(CSS)using multiple nanosatellites.First,a simplified geometrical model of the CSS is constructed using fundamental solids,such as the capsule body and cuboid.Second,the spacecraft formation configuration for the observation mission is characterized by a three-dimensional(3D)Lissajous curve using related design parameters under the full-coverage observation requirements of specific parts,such as the CSS connecting section and collision avoidance constraints.Third,a double-layer control law is designed for each nanosatellite,in which the upper layer is a distributed observer for recognizing the target formation configuration parameters,and the lower layer is a trajectory-tracking controller to make the nanosatellite converge to its temporary target position calculated from the upper layer’s outputs.The closed-loop control stability is proven under the condition that the communication network topology of the nanosatellite cluster contains a directed spanning tree.Finally,the control method is verified by numerical simulation,where the CSS connecting section is selected as the observation target,and ten small nanosatellites are assumed to perform the cooperative observation mission.The simulation results demonstrate that the double-layer control law is robust to single-point communication failures and suitable for the accompanying missions of large space objects with multiple nanosatellites.展开更多
The 3-D velocity tomography image of the central-eastern part of Qilianshan is obtained by the joint inversion of 3-D velocity structure and focal parameters based on the S-P data of micro-earthquakes recorded by the ...The 3-D velocity tomography image of the central-eastern part of Qilianshan is obtained by the joint inversion of 3-D velocity structure and focal parameters based on the S-P data of micro-earthquakes recorded by the digital seismic network set up for a Sino-French cooperation program since 1996. The inversed velocity structure does primarily reflect some important features of the deep structure in the region and provide the scientific background for the further study of active tectonic structure and the calculation of earthquake parameters.展开更多
To deal with the non-Caussian noise in standard 2-D SAR images, the deramped signal in imaging plane, and the possible symmetric distribution of complex noise, the fourth-order cumulant of complex process is introduce...To deal with the non-Caussian noise in standard 2-D SAR images, the deramped signal in imaging plane, and the possible symmetric distribution of complex noise, the fourth-order cumulant of complex process is introduced into SAR tomography. With the estimated AR parameters of ARMA model of noise through Yule-Walker equation, the signal series of height is pre-filtered. Then, through ESPRIT, the spectrum is obtained and the aperture in height direction is synthesized. Finally, the SAR tomography imaging of scene is achieved. The results of processing on signal with non-Gaussian noise demonstrate the robustness of the proposed method. The tomography imaging of the scenes shows that the higher-order spectrum analysis is feasible in the application.展开更多
A method using spectrum illumination to reconstruct 3-D object image is a new concept in the field of computer vision. The design of optical illumination system is crucial in this method. Several ways to achieve multi...A method using spectrum illumination to reconstruct 3-D object image is a new concept in the field of computer vision. The design of optical illumination system is crucial in this method. Several ways to achieve multi-color spectrum illumination are discussed. A prism illumination system is designed by means of aligning symmetrically the prism at the mid-wavelength (n d=1.806 274) of light path and using reflection collimating lens, cylindrical expending lens and two optical shutters. The relations between deviation angles and light wavelengths are given, and some 3-D reconstruction results are presented.展开更多
基金supported by the Feng Yun Application Pioneering Project (FY-APP-2022.0502)the National Natural Science Foundation of China (Grant No. 42205140)。
文摘Atmospheric ammonia(NH_(3)) is a chemically active trace gas that plays an important role in the atmospheric environment and climate change. Satellite remote sensing is a powerful technique to monitor NH_(3) concentration based on the absorption lines of NH_(3) in the thermal infrared region. In this study, we establish a retrieval algorithm to derive the NH_(3)column from the Hyperspectral Infrared Atmospheric Sounder(HIRAS) onboard the Chinese Feng Yun(FY)-3D satellite and present the first atmospheric NH_(3) column global map observed by the HIRAS instrument. The HIRAS observations can well capture NH_(3) hotspots around the world, e.g., India, West Africa, and East China, where large NH_(3) emissions exist. The HIRAS NH_(3) columns are also compared to the space-based Infrared Atmospheric Sounding Interferometer(IASI)measurements, and we find that the two instruments observe a consistent NH_(3) global distribution, with correlation coefficient(R) values of 0.28–0.73. Finally, some remaining issues about the HIRAS NH_(3) retrieval are discussed.
基金supported by the National Natural Science Foundation of China (62001436)the Natural Science Foundation of Jiangsu Province under (BK 20190143,JSGG20190823094603691)。
文摘Three-dimensional(3D) synthetic aperture radar(SAR)extends the conventional 2D images into 3D features by several acquisitions in different aspects. Compared with 3D techniques via multiple observations in elevation, e.g. SAR interferometry(InSAR) and SAR tomography(TomoSAR), holographic SAR can retrieve 3D structure by observations in azimuth. This paper focuses on designing a novel type of orbit to achieve SAR regional all-azimuth observation(AAO) for embedded targets detection and holographic 3D reconstruction. The ground tracks of the AAO orbit separate the earth surface into grids. Target in these grids can be accessed with an azimuth angle span of360°, which is similar to the flight path of airborne circular SAR(CSAR). Inspired from the successive coverage orbits of optical sensors, several optimizations are made in the proposed method to ensure favorable grazing angles, the performance of 3D reconstruction, and long-term supervision for SAR sensors. Simulation experiments show the regional AAO can be completed within five hours. In addition, a second AAO of the same area can be duplicated in two days. Finally, an airborne SAR data process result is presented to illustrate the significance of AAO in 3D reconstruction.
文摘3D stereoscopic visualization technology is coming into more and more common use in the field of entertainment,and this technology is also beginning to cut a striking figure in casting industry and scientific research.The history,fundamental principle,and devices of 3D stereoscopic visualization technology are reviewed in this paper.The authors’research achievements on the 3D stereoscopic visualization technology in the modeling and simulation of the casting process are presented.This technology can be used for the observation of complex 3D solid models of castings and the simulated results of solidification processes such as temperature,fluid flow,displacement,stress strain and microstructure,as well as the predicted defects such as shrinkage/porosity,cracks,and deformation.It can also be used for other areas relating to 3D models,such as assembling of dies,cores,etc.Several cases are given to compare the illustration of simulated results by traditional images and red-blue 3D stereoscopic images.The spatial shape is observed better by the new method.The prospect of3D stereoscopic visualization in the casting aspect is discussed as well.The need for aided-viewing devices is still the most prominent problem of 3D stereoscopic visualization technology.However,3D stereoscopic visualization represents the tendency of visualization technology in the future;and as the problem is solved in the years ahead,great breakthroughs will certainly be made for its application in casting design and modeling and simulation of the casting processes.
基金the financial support received from National Natural Science Foundation of China(No.31430067 and 31601475)China Postdoctoral Science Foundation funded project(No.2017M610200)Heilongjiang Postdoctoral Foundation(No.LBH-Z17011)
文摘The understanding of the structure morphology of oil-rich emulsion from enzyme-assisted extraction processing(EAEP)was a critical step to break the oil-rich emulsion structure in order to recover oil.Albeit EAEP method has been applied as an alternative way to conventional solvent extraction method,the structure morphology of oil-rich emulsion was still unclear.The current study aimed to investigate the structure morphology of oil-rich emulsion from EAEP using 3 D confocal Raman imaging technique.With increasing the enzymatic hydrolysis duration from 1 to 3 h,the stability of oil-rich emulsion was decreased as visualized in the 3 D confocal Raman images that the protein and oil were mixed together.The subsequent Raman spectrum analysis further revealed that the decreased stability of oil-rich emulsion was due to the protein aggregations via SS bonds or protein-lipid interactions.The conformational transfer in protein indicated the formation of a compact structure.
基金National Natural Science Foundation of China (40074010) and Natural Science Foundation of Gansu Province (ZS981-A25-011)
文摘The 3-D velocity tomography image of the central-eastern part of Qilianshan is obtained by the joint inversion of 3-D velocity structure and focal parameters based on the S-P data of micro-earthquakes recorded by the digital seismic network set up for a Sino-French cooperation program since 1996. The inversed velocity structure does primarily reflect some important features of the deep structure in the region and provide the scientific background for the further study of active tectonic structure and the calculation of earthquake parameters.
基金the National Natural Science Foundation of China(Grant No.12172288)the National Key Basic Research Program of China:Gravitational Wave Detection Project(Grant Nos.2021YFC2202600 and 2021YFC2202603).
文摘This study proposes a parametric formation control method for the cooperative observation of the China Space Station(CSS)using multiple nanosatellites.First,a simplified geometrical model of the CSS is constructed using fundamental solids,such as the capsule body and cuboid.Second,the spacecraft formation configuration for the observation mission is characterized by a three-dimensional(3D)Lissajous curve using related design parameters under the full-coverage observation requirements of specific parts,such as the CSS connecting section and collision avoidance constraints.Third,a double-layer control law is designed for each nanosatellite,in which the upper layer is a distributed observer for recognizing the target formation configuration parameters,and the lower layer is a trajectory-tracking controller to make the nanosatellite converge to its temporary target position calculated from the upper layer’s outputs.The closed-loop control stability is proven under the condition that the communication network topology of the nanosatellite cluster contains a directed spanning tree.Finally,the control method is verified by numerical simulation,where the CSS connecting section is selected as the observation target,and ten small nanosatellites are assumed to perform the cooperative observation mission.The simulation results demonstrate that the double-layer control law is robust to single-point communication failures and suitable for the accompanying missions of large space objects with multiple nanosatellites.
基金National Natural Science Foundation of China (40074010) and Natural Science Foundation of Gansu Province(ZS981-A25-011).
文摘The 3-D velocity tomography image of the central-eastern part of Qilianshan is obtained by the joint inversion of 3-D velocity structure and focal parameters based on the S-P data of micro-earthquakes recorded by the digital seismic network set up for a Sino-French cooperation program since 1996. The inversed velocity structure does primarily reflect some important features of the deep structure in the region and provide the scientific background for the further study of active tectonic structure and the calculation of earthquake parameters.
基金supported partly by the New Century Excellent Talents in University(23901019)the Sichuan Provincial Youth Science and Technology Foundation(06ZQ026-006).
文摘To deal with the non-Caussian noise in standard 2-D SAR images, the deramped signal in imaging plane, and the possible symmetric distribution of complex noise, the fourth-order cumulant of complex process is introduced into SAR tomography. With the estimated AR parameters of ARMA model of noise through Yule-Walker equation, the signal series of height is pre-filtered. Then, through ESPRIT, the spectrum is obtained and the aperture in height direction is synthesized. Finally, the SAR tomography imaging of scene is achieved. The results of processing on signal with non-Gaussian noise demonstrate the robustness of the proposed method. The tomography imaging of the scenes shows that the higher-order spectrum analysis is feasible in the application.
文摘A method using spectrum illumination to reconstruct 3-D object image is a new concept in the field of computer vision. The design of optical illumination system is crucial in this method. Several ways to achieve multi-color spectrum illumination are discussed. A prism illumination system is designed by means of aligning symmetrically the prism at the mid-wavelength (n d=1.806 274) of light path and using reflection collimating lens, cylindrical expending lens and two optical shutters. The relations between deviation angles and light wavelengths are given, and some 3-D reconstruction results are presented.
