Partitioning Calculation Method of Short-Circuit Current for High Proportion DG Access to Distribution Network

Aiming at the problemthat the traditional short-circuit current calculationmethod is not applicable to Distributed Generation(DG)accessing the distribution network,the paper proposes a short-circuit current partitioning calculation method considering the degree of voltage drop at the grid-connected point of DG.Firstly,the output characteristics of DG in the process of low voltage ride through are analyzed,and the equivalent output model of DG in the fault state is obtained.Secondly,by studying the network voltage distribution law after fault in distribution networks under different DG penetration rates,the degree of voltage drop at the grid-connected point of DG is used as a partition index to partition the distribution network.Then,iterative computation is performed within each partition,and data are transferred between partitions through split nodes to realize the fast partition calculation of short-circuit current for high proportion DG access to distribution network,which solves the problems of long iteration time and large calculation error of traditional short-circuit current.Finally,a 62-node real distribution network model containing a high proportion of DG access is constructed onMATLAB/Simulink,and the simulation verifies the effectiveness of the short-circuit current partitioning calculation method proposed in the paper,and its calculation speed is improved by 48.35%compared with the global iteration method.

T lymphocyte proportion in Alzheimer’s disease prognosis

Bai et al investigate the predictive value of T lymphocyte proportion in Alzheimer's disease(AD)prognosis.Through a retrospective study involving 62 AD patients,they found that a decrease in T lymphocyte proportion correlated with a poorer prognosis,as indicated by higher modified Rankin scale scores.While the study highlights the potential of T lymphocyte proportion as a prognostic marker,it suggests the need for larger,multicenter studies to enhance generalizability and validity.Additionally,future research could use cognitive exams when evaluating prognosis and delve into immune mechanisms underlying AD progression.Despite limitations inherent in retrospective designs,Bai et al's work contributes to understanding the immune system's role in AD prognosis,paving the way for further exploration in this under-researched area.

A Note on an Order Level Inventory Model with Varying Two-Phased Demand and Time-Proportional Deterioration

The main purpose of this paper is to generalize the effect of two-phased demand and variable deterioration within the EOQ (Economic Order Quantity) framework. The rate of deterioration is a linear function of time. The two-phased demand function states the constant function for a certain period and the quadratic function of time for the rest part of the cycle time. No shortages as well as partial backlogging are allowed to occur. The mathematical expressions are derived for determining the optimal cycle time, order quantity and total cost function. An easy-to-use working procedure is provided to calculate the above quantities. A couple of numerical examples are cited to explain the theoretical results and sensitivity analysis of some selected examples is carried out.

Bamboo Fiber Modified Asphalt Mixture Proportion Design and Road Performances Based on Response Surface Method

In order to comprehensively utilize the remaining bamboo residue of bamboo products,this paper presents a research on recycling the bamboo fibers from bamboo residue for improving the performance of the asphalt mixtures.First of all,the basic performance parameters of sinocalamus affinis fiber,phyllostachys pubescens fiber,green bamboo fiber were tested and analyzed,and the optimal content and length were put forward.Then,the mix ratio design of the bamboo fiber modified asphalt mixture was further designed through the response surface method,and was verified the rationality of the mix ratio.Finally,the mixture specimens were made according to the experimental design mix ratio,and the high temperature,low temperature performance and moisture susceptibility of the bamboo fiber modified mixtures asphalt were tested.The results showed that the high temperature performance,low temperature performance and moisture susceptibility of bamboo fiber modified asphalt mixtures were improved compared with the performance of SBS modified asphalt mixture.When the length of bamboo fiber is 7.25 mm and the content of 0.22%,the road performance of the asphalt mixture was optimal.Consequentially,the decomposition of bamboo residue into bamboo fiber and its application in asphalt pavement can improve the reuse of bamboo waste,with remarkable environmental benefits and great promotion value.

Mixed-Effects Parametric Proportional Hazard Model with Generalized Log-Logistic Baseline Distribution

Clustered survival data are widely observed in a variety of setting. Most survival models incorporate clustering and grouping of data accounting for between-cluster variability that creates correlation in order to prevent underestimate of the standard errors of the parameter estimators but do not include random effects. In this study, we developed a mixed-effect parametric proportional hazard (MEPPH) model with a generalized log-logistic distribution baseline. The parameters of the model were estimated by the application of the maximum likelihood estimation technique with an iterative optimization procedure (quasi-Newton Raphson). The developed MEPPH model’s performance was evaluated using Monte Carlo simulation. The Leukemia dataset with right-censored data was used to demonstrate the model’s applicability. The results revealed that all covariates, except age in PH models, were significant in all considered distributions. Age and Townsend score were significant when the GLL distribution was used in MEPPH, while sex, age and Townsend score were significant in MEPPH model when other distributions were used. Based on information criteria values, the Generalized Log-Logistic Mixed-Effects Parametric Proportional Hazard model (GLL-MEPPH) outperformed other models.

Proportion Integration Differentiation(PID)Control Strategy of Belt Sander Based on Fuzzy Algorithm

Aiming at solving the problems of response lag and lack of precision and stability in constant grinding force control of industrial robot belts,a constant force control strategy combining fuzzy control and proportion integration differentiation(PID)was proposed by analyzing the signal transmission process and the dynamic characteristics of the grinding mechanism.The simulation results showed that compared with the classical PID control strategy,the system adjustment time was shortened by 98.7%,the overshoot was reduced by 5.1%,and the control error was 0.2%-0.5%when the system was stabilized.The optimized fuzzy control system had fast adjustment speeds,precise force control and stability.The experimental analysis of the surface morphology of the machined blade was carried out by the industrial robot abrasive grinding mechanism,and the correctness of the theoretical analysis and the effectiveness of the control strategy were verified.

Proportion of thyroid cancer and other cancers in the democratic republic of Congo

BACKGROUND Cancer diagnosis is increasing around the world and in the Democratic Republic of the Congo(DRC).The proportion of thyroid cancer has increased over the past three decades.There are very few studies on cancer epidemiology,and in particular on thyroid cancer in the DRC.AIM To establish the most recent proportion of thyroid cancer in the DRC compared to other cancers.METHODS This is a retrospective and descriptive study of 6106 consecutive cancer cases listed in the pathological registers of 4 Laboratories in the city of Kinshasa.This study included all cancer cases recorded in the registers between 2005 and 2019.RESULTS From a sample of 6106 patients,including all cancer types,68.3%cases were female and 31.7%were male.Breast and cervical cancer were the most common types of cancer in women and,prostate and skin cancer were the most common types in men.Thyroid cancer was sixth in proportion in women and eleventh in men compared to all cancers.Papillary carcinoma was the most common of thyroid cancers.Rare cancers such as anaplastic and medullary thyroid carcinomas had a proportion of 7%and 2%,respectively.CONCLUSION Newer diagnostic tools led to a surge in cancer diagnoses in the DRC.Thyroid cancer has more than doubled its proportion over the last several decades in the country.

Survival Analysis Using Cox Proportional Hazards Regression for Pile Bridge Piles Under Wet Service Conditions

This paper studies the deterioration of bridge substructures utilizing the Long-Term Bridge Performance(LTBP)Program InfoBridge^(TM)and develops a survival model using Cox proportional hazards regression.The survival anal­ysis is based on the National Bridge Inventory(NBI)dataset.The study calculates the survival rate of reinforced and prestressed concrete piles on bridges under marine conditions over a 29-year span(from 1992 to 2020).The state of Maryland is the primary focus of this study,with data from three neighboring regions,the District of Columbia,Vir­ginia,and Delaware to expand the sample size.The data obtained from the National Bridge Inventory are condensed and filtered to acquire the most relevant information for model development.The Cox proportional hazards regres­sion is applied to the condensed NBI data with six parameters:Age,ADT,ADTT,number of spans,span length,and structural length.Two survival models are generated for the bridge substructures:Reinforced and prestressed concrete piles in Maryland and reinforced and prestressed concrete piles in wet service conditions in the District of Columbia,Maryland,Delaware,and Virginia.Results from the Cox proportional hazards regression are used to construct Markov chains to demonstrate the sequence of the deterioration of bridge substructures.The Markov chains can be used as a tool to assist in the prediction and decision-making for repair,rehabilitation,and replacement of bridge piles.Based on the numerical model,the Pile Assessment Matrix Program(PAM)is developed to facilitate the assessment and main­tenance of current bridge structures.The program integrates the NBI database with the inspection and research reports from various states’department of transportation,to serve as a tool for condition state simulation based on mainte­nance or rehabilitation strategies.

Product reliability assessment based on proportional hazard degradation model

In order to evaluate the reliability of long-lifetime products with degradation data, a new proportional hazard degradation model is proposed. By the similarity between time-degradation data and stress-accelerated lifetime, and the failure rate function of degradation data which is assumed to be proportional to the time covariate, the reliability assessment based on a proportional hazard degradation model is realized. The least squares method is used to estimate the model＇s parameters. Based on the failure rate of the degradation data and the proportion function of the known time, the failure rate and the reliability function under the given time and the predetermined failure threshold can be extrapolated. A long life GaAs laser is selected as a case study and its reliability is evaluated. The results show that the proposed method can accurately describe the degradation process and it is effective for the reliability assessment of long lifetime products.

Effect of Different Proportions of Wolffia on Growth of Procambarus clarkia in Two Community Scales

[Objective] This study aimed to examine the effect of different proportions of Wolffia on the growth of Procambarus clarkia in 2 kinds of community scales. [Method] Six proportions of baits mixed by watermeal and commercial feed (0, 20%, 40%, 60%, 80%, and 100%) were designed to feed the Procambarus clarkia juveniles in 2 community scales to research the growth situation of the crayfish in different mixed baits. The growth differences between the minimal community and the larger community of crayfish in the same proportion of Wolffia were compared. [Result] The growth situations of crayfish in the 2 community scales at different proportions of watermeal were as follows: the body length was the longest in 60% watermeal group, and shortest in the pure watermeal group; the regularity was the best in the 20% watermeal group; no matter the minimal community or the larger community, there was no significant difference in the survival rate between different watermeal proportions. The growth situations of crayfish in the 2 community scales at specific proportion of watermeal were: the average body length of the minimal community was significantly greater than the larger community, and the survival rate also greater than the latter one, but the difference was not significant. [Conclusion] Considering all kinds of index such as growth, survival rate, regularity, the appropriate proportion of the baits mixed by watermeal and commercial feed is 40% to 60%; big community scale has significant inhibition on growth of crayfish, thus, there should be barriers when cultivating Procambarus clarkia juvenile.

Variable Structure Proportional Navigation for Homing Missile

The purpose of this paper is to design control loop and guidance loop for the homing missile, to prove that the modified variable structure proportional navigation (VSPN) can be used in passive homing guidance system, and to compare the VSPN with the proportional navigation (PN). Angular rate and linear acceleration are fed back to improve the stability and robust of autopilot, VSPN and PN are compared in mathematics simulation of homing missile in attacking tanks and helicopters. The damp and the stability of the missile body are increased. The VSPN cuts down the overload of guidance phase dramatically, makes the ballistic trajectory straighter than PN and leads to smaller missdistance. The VSPN can be used for passive homing guidance system, and is especially suitable for attacking helicopter.

Self Adjusting Feedforward Compensation Tracking Control for Proportional Valve Controlled Motor

Aim Aiming at the position tracking control for valve controlled motor electrohydraulic proportional servo systems mainly driving the static load torque, the tracking performance was studied in the presence of the variable gain and deadzone. Methods On the basis of conventional composite control with the deadzone compensation method, a comprehensive control approach with the deadzone and self adjusting feedforward compensation was proposed. Results Experimental results showed that the good tracking performance was achieved for the sinusoidal and constant velocity position tracking under a wide variations of load torque. Conclusion The position tracking accuracy for valve controlled motor electrohydraulic proportional servo systems has been solved by using the comprehensive control approach with the deadzone and self adjusting feedforward compensation.

Precision Point to Point Control of Proportional Valve Controlled Motor with a Time Varying Load

Aim In accordance with the positioning control for valve controlled motor electrohydraulic proportional servo systems driving the static load torque, the positioning performance was studied in the presence of the time? varying deadzone and gain. Methods The large positioning errors caused by the time varying deadzone were significantly reduced by using the dynamic compensation method for the deadzone; and the large overshoot caused by the time varying gain were dramatically reduced by using the three section intelligent control schemes. Results Experimental results demonstrated that the positioning performance of rapid response, high accuracy and smaller or even no overshoot was achieved under a wide variations of load torque. Conclusion The good positioning performance for valve controlled motor servo systems has been achieved in the presence of the time varying deadzone and gain.

rate,ratio,proportion辨析

rate,ratio,proportion三词都可以表示“比例”。表此义时,其差别甚是微妙,值得注意。现作如下辨析: rate指“比、比率、比例”,如:mortality rate死亡率,tax rate税率,rate of rejects废品率,rate of attendance出勤率,crime rate犯罪率,divorce rate离婚率,accident rate事故发生率。从以上例证不难看出,这里所谓的“比、比率”是指部分相对整体形成的比率,即a mea-sure of a part with respect to the whole。如“废品率”是产品“总量”减去“正品量”然后除以总量而得来的。

A New Kind of Pilot Controlled Proportional Direction Valve with Internal Flow Feedback

Proportional direction valve is one of the most fundamental elements in electronic-hydraulic control technique. Its function is to control the operating speed, direction, position, and strength of output force of the hydraulic actuator continuously. Considering the different application and the cost, the existing technique mainly includes the internal feedback valve used in open loop system, and the electronic closed loop controlled valve used in closed loop system. Because of their different mechanical structure and the gre at different in performance, it brings inconvenience for customer to select, also inconvenience for enterprise to produce. Aiming at this problem, the idea of combining the above two kinds of valves into one body is proposed first, and then the new valve＇s structure to realize this target is designed. The idea intends to apply the displacement pilot flow feedback control principle in present 2-position 2-way valve system to the proportional direction valve of 3-position 4-way system. Newly designed feed forward controller can decouple the interference between the internal feedback and the electronic closed loop. Redundant conversion is designed to electronic switch mode. Experiment on dynamic and static characteristic of new proportional direction valve in internal feedback control mode and electronic closed loop control mode is discussed to prove the new theory is correct. Although the new valve is of excellent dynamic response characteristic, its steady control characteristic in open loop control mode needs to be improved further. The research results prepare one new fundamental element for electronic-hydraulic control technology.

RESEARCH ON THE PERFORMANCE OF NEW TYPE OF PROPORTIONAL PESSURE AND FLOW CONTROL VALVE

A new closed loop flow controlling principle through correcting the valve'sopening area while load pressure is changing is carried out. Further more a principle using only oneproportional valve to compound control pressure and flow is suggested. By using very simpleproportional throttle valve in structure, the functions that five kinds of proportional valves orany two of them combined possess can be complimented. After analyzing, comparing, and testing thedynamic and static characteristics of valve with different controlling principles and main valvestructure styles, the optimized structure styles and control methods are achieved.

PILOT LEAKAGE'S INFLUENCES ON THE PERFORMANCES OF EXTRA HIGH PRESSURE PROPORTIONAL PNEUMATIC VALVE

A mathematic model is built up to analyze the influences of a pilot valve'sleakage on the performances of pneumatic pressure proportional valve, and the performances aresimulated by using MATLAB. The results indicate that using slide pilot valve in the valve system isfeasible, but the leakage's influences can not be neglected, especially it may induce instability ina low output pressure situation. A pilot valve using too large throttle window will cause the valveoscillate. To improve the working condition of pilot valve, a method adopting different widths oftwo throttle window is proposed. According to our simulation, this method balances the pressure dropbetween the two stage throttle ports, and reduces the influences of pilot valve's leakage.

Combined proportional navigation law for interception of high-speed targets

A new proportional navigation(PN) guidance law,called combined proportional navigation(CPN),is proposed.The guidance law is designed to intercept high-speed targets,which is a common case for ballistic targets.The range of target-to-interceptor speed ratio during target interception is derived when guidance laws are applied in high-speed targets interception,and the effectiveness of negative navigation ratio in the PN-based guidance law is proven analytically in some lemmas.Based on the lemmas,the lateral acceleration command of CPN is defined,and the solution to the appearance of singularity in time-varying navigation ratio is given.The simulation results show that CPN can determine headon engagement(as PN) or tail-chase engagement(as RPN) through initial path angle compared with PN and retro proportional navigation(RPN),and can adjust the value of navigation ratio for head-on engagement or tail-chase engagement.Therefore,the capture region of CPN is larger than that of other guidance laws using PN-based methods.

Ore-proportioning optimization technique with high proportion of Yandi ore in sintering

The basic sintering characteristics of Yandi ore from Australia, including assimilation ability, liquid phase fluidity, self-strength of bonding phase, forming ability of silico ferrite of calcium and aluminum （SFCA）, and so on, were investigated in detail. Besides, the high temperature behavior and function of sintering were obtained. As a result, the techniques for ore-proportioning in sintering were obtained. The results show that Yandi ore possessing higher assimilation ability, better liquid phase fluidity, lower self-strength of bonding phase, and better forming ability of SFCA, should be mixed with iron ores whose properties are opposite to those of Yandi ore. In the optimization of sintering ore-proportioning, Yandi ore, whose price is relatively low, can be mixed as high as 40wt%.

Reliability estimation and remaining useful lifetime prediction for bearing based on proportional hazard model

As the central component of rotating machine,the performance reliability assessment and remaining useful lifetime prediction of bearing are of crucial importance in condition-based maintenance to reduce the maintenance cost and improve the reliability.A prognostic algorithm to assess the reliability and forecast the remaining useful lifetime(RUL) of bearings was proposed,consisting of three phases.Online vibration and temperature signals of bearings in normal state were measured during the manufacturing process and the most useful time-dependent features of vibration signals were extracted based on correlation analysis(feature selection step).Time series analysis based on neural network,as an identification model,was used to predict the features of bearing vibration signals at any horizons(feature prediction step).Furthermore,according to the features,degradation factor was defined.The proportional hazard model was generated to estimate the survival function and forecast the RUL of the bearing(RUL prediction step).The positive results show that the plausibility and effectiveness of the proposed approach can facilitate bearing reliability estimation and RUL prediction.