In order to recognize the distribution of dispersed remaining oil,reservoirs should be described in more detail and quantitatively to establish refined and sophisticated 3D quantified reservoir model which can reflect...In order to recognize the distribution of dispersed remaining oil,reservoirs should be described in more detail and quantitatively to establish refined and sophisticated 3D quantified reservoir model which can reflect the detailed variation in the reservoir and its structure.The key point of sophistication and quantification of reservoir characterization is to describe the geo-metry of interwell sandbodies and to estimate their reservoir parameters.展开更多
As stated above,the ultimate recovery of conventional oil in our country is estimated to be 33.6%,i.e,about 66.4%of the oil reserves cannot be recovered by water injection and may only be targeted for tertiary oil rec...As stated above,the ultimate recovery of conventional oil in our country is estimated to be 33.6%,i.e,about 66.4%of the oil reserves cannot be recovered by water injection and may only be targeted for tertiary oil recovery or for other ty pes.of new technologics.A screening of 82 major oifields developed by water injection and an analysis of their potential showed that application of tertiary recovery technique such as polymer flooding,surfactant flooding and gas miseible flooding will inerease the oil recovery by 12.4%.The total recoverable reserve increment cor-responds to 56%of the current remaining recover-able reserves.This means that the recoverable r'eserves in OUr country can increase by more than one half by a fully tapping of the potential.Therefore,the development of tertiary recovery technology will be an important strategic measure in China's petroleum industry.展开更多
According to drilling core analysis and a lot of.field information,it was proved that the current reservoir range above oil-water contact detected by observation wells,was no more a complete pure oil bearing zone with...According to drilling core analysis and a lot of.field information,it was proved that the current reservoir range above oil-water contact detected by observation wells,was no more a complete pure oil bearing zone with exception of water cone,but a complicated oil-water mixed zone.The oil,satura-tion in the fracture system varied greatly.The large fractures with width of over 100μm were al-most water flushed,the middle fractures between 50-100μm were water encroachment zone and the small fractures less than 50μm were still in a good oil-bearing condition.展开更多
The upper Ming section of L oilfield is a typical offshore heavy oil bottom-water reservoir with thick fluvial layers. All horizontal wells are developed by natural energy. Due to the few drilling holes and influence ...The upper Ming section of L oilfield is a typical offshore heavy oil bottom-water reservoir with thick fluvial layers. All horizontal wells are developed by natural energy. Due to the few drilling holes and influence by the resolution of seismic data, it is difficult to describe reservoirs with thickness over 20 meters. In this paper, seismic resonance amplitude inversion technology is introduced to restore the real response of thick reservoirs and interbeds by drilling and drilling verification, and the geological bodies with different thickness are displayed by frequency division RGB three primary colors. Flow units of heavy oil reservoirs with bottom water are divided according to the three major factors of interlayer, lithologic internal boundary and water-oil thickness ratio which have the greatest influence on horizontal well development, thick sand bodies are divided into 10 different flow units in three levels, each unit is separated from each other, and the reservoir structure, water-cut characteristics and water-flooding characteristics are different. The reliability of the research is improved by using the dynamic data of horizontal wells and newly drilled passing wells, which provides a basis for tapping the potential of heavy oil reservoirs with bottom water.展开更多
The oi!bearing area of Gudao Oilfield covers 80.9 square kilometers.with 373 million tons of oil in place.It is a large drape anticlinal.Neogene Gu-dao Formation is main oil-beraing reservoir devel-oped with dip gentl...The oi!bearing area of Gudao Oilfield covers 80.9 square kilometers.with 373 million tons of oil in place.It is a large drape anticlinal.Neogene Gu-dao Formation is main oil-beraing reservoir devel-oped with dip gentle from 30'to 1°30'in general.The main oil-bearing sequences can be divided into 6 sand groups and 34 layers in detail.in which the Ng°-Ng°sand groups are the main payzones in which oil in place accounts for 97.2%of the total.展开更多
The switchable oil layer driven by electrowetting gives visible color and light valve control, which is the basis of Electro-Fluidic Displays. The colored oil’s property is a key factor that influences the Electro-Fl...The switchable oil layer driven by electrowetting gives visible color and light valve control, which is the basis of Electro-Fluidic Displays. The colored oil’s property is a key factor that influences the Electro-Fluidic Displays switching behavior. A purple oil was formulated by the oil-soluble purple dye in decane in this study. The dye molecule itself is nonpolar and it doesn’t dissolve in water. The concentration of colored oil influenced the oil/water interfacial tension and oil viscosity. The relationship of EFD switching behavior with oil/water interfacial tension, oil viscosity, and oil conductivity has been systematically investigated. The oil/water interfacial tension decreased with increasing oil concentration, in the meanwhile, the conductivity increased. Oil conductivity was one of the key factors that influenced the Electro-Fluidic Displays optical property. We found for the first time that at the lower oil concentration (2% - 10%), the interfacial tension plays a main role effect on the rupture voltage and response time, but as the conductivity of higher concentration of colored oil increased (at 20%), the rupture voltage-controlled both by conductivity and interfacial tension.展开更多
The combined well pattern has been widely used in reservoir development, with a common pattern being a horizontal well in the center for oil production and multiple vertical wells around for water injection. For this ...The combined well pattern has been widely used in reservoir development, with a common pattern being a horizontal well in the center for oil production and multiple vertical wells around for water injection. For this type of well pattern, determining the horizontal well is affected by which injection wells, especially when the injecting water breaks through, accurately determining the direction of water inflow will provide an important basis for targeted water well measures. Based on the production performance data of horizontal wells, the semi logarithmic relationship curves of water-oil ratio, derivative water-oil ratio, and cumulative production were used for the first time to determine the breakthrough problem of water injection in the surrounding water injection wells of horizontal wells based on their response characteristics. The adaptability of this method under different influencing factors was analyzed. Introducing the parameter of cumulative production not only preserves the variation trend of the derivative of water-oil ratio with time, but also facilitates the processing of actual production data.展开更多
文摘In order to recognize the distribution of dispersed remaining oil,reservoirs should be described in more detail and quantitatively to establish refined and sophisticated 3D quantified reservoir model which can reflect the detailed variation in the reservoir and its structure.The key point of sophistication and quantification of reservoir characterization is to describe the geo-metry of interwell sandbodies and to estimate their reservoir parameters.
文摘As stated above,the ultimate recovery of conventional oil in our country is estimated to be 33.6%,i.e,about 66.4%of the oil reserves cannot be recovered by water injection and may only be targeted for tertiary oil recovery or for other ty pes.of new technologics.A screening of 82 major oifields developed by water injection and an analysis of their potential showed that application of tertiary recovery technique such as polymer flooding,surfactant flooding and gas miseible flooding will inerease the oil recovery by 12.4%.The total recoverable reserve increment cor-responds to 56%of the current remaining recover-able reserves.This means that the recoverable r'eserves in OUr country can increase by more than one half by a fully tapping of the potential.Therefore,the development of tertiary recovery technology will be an important strategic measure in China's petroleum industry.
文摘According to drilling core analysis and a lot of.field information,it was proved that the current reservoir range above oil-water contact detected by observation wells,was no more a complete pure oil bearing zone with exception of water cone,but a complicated oil-water mixed zone.The oil,satura-tion in the fracture system varied greatly.The large fractures with width of over 100μm were al-most water flushed,the middle fractures between 50-100μm were water encroachment zone and the small fractures less than 50μm were still in a good oil-bearing condition.
文摘The upper Ming section of L oilfield is a typical offshore heavy oil bottom-water reservoir with thick fluvial layers. All horizontal wells are developed by natural energy. Due to the few drilling holes and influence by the resolution of seismic data, it is difficult to describe reservoirs with thickness over 20 meters. In this paper, seismic resonance amplitude inversion technology is introduced to restore the real response of thick reservoirs and interbeds by drilling and drilling verification, and the geological bodies with different thickness are displayed by frequency division RGB three primary colors. Flow units of heavy oil reservoirs with bottom water are divided according to the three major factors of interlayer, lithologic internal boundary and water-oil thickness ratio which have the greatest influence on horizontal well development, thick sand bodies are divided into 10 different flow units in three levels, each unit is separated from each other, and the reservoir structure, water-cut characteristics and water-flooding characteristics are different. The reliability of the research is improved by using the dynamic data of horizontal wells and newly drilled passing wells, which provides a basis for tapping the potential of heavy oil reservoirs with bottom water.
文摘The oi!bearing area of Gudao Oilfield covers 80.9 square kilometers.with 373 million tons of oil in place.It is a large drape anticlinal.Neogene Gu-dao Formation is main oil-beraing reservoir devel-oped with dip gentle from 30'to 1°30'in general.The main oil-bearing sequences can be divided into 6 sand groups and 34 layers in detail.in which the Ng°-Ng°sand groups are the main payzones in which oil in place accounts for 97.2%of the total.
文摘The switchable oil layer driven by electrowetting gives visible color and light valve control, which is the basis of Electro-Fluidic Displays. The colored oil’s property is a key factor that influences the Electro-Fluidic Displays switching behavior. A purple oil was formulated by the oil-soluble purple dye in decane in this study. The dye molecule itself is nonpolar and it doesn’t dissolve in water. The concentration of colored oil influenced the oil/water interfacial tension and oil viscosity. The relationship of EFD switching behavior with oil/water interfacial tension, oil viscosity, and oil conductivity has been systematically investigated. The oil/water interfacial tension decreased with increasing oil concentration, in the meanwhile, the conductivity increased. Oil conductivity was one of the key factors that influenced the Electro-Fluidic Displays optical property. We found for the first time that at the lower oil concentration (2% - 10%), the interfacial tension plays a main role effect on the rupture voltage and response time, but as the conductivity of higher concentration of colored oil increased (at 20%), the rupture voltage-controlled both by conductivity and interfacial tension.
文摘The combined well pattern has been widely used in reservoir development, with a common pattern being a horizontal well in the center for oil production and multiple vertical wells around for water injection. For this type of well pattern, determining the horizontal well is affected by which injection wells, especially when the injecting water breaks through, accurately determining the direction of water inflow will provide an important basis for targeted water well measures. Based on the production performance data of horizontal wells, the semi logarithmic relationship curves of water-oil ratio, derivative water-oil ratio, and cumulative production were used for the first time to determine the breakthrough problem of water injection in the surrounding water injection wells of horizontal wells based on their response characteristics. The adaptability of this method under different influencing factors was analyzed. Introducing the parameter of cumulative production not only preserves the variation trend of the derivative of water-oil ratio with time, but also facilitates the processing of actual production data.
