Stabilization of Dynamic Systems for Multiple Omni-Directional Mobile Robots

This paper deals with the stabilization of dynamic systems for two omni directional mobile robots by using the inner product of two vectors, one is from a robot's position to another's, the other is from a robot's target point to another's. The multi step control laws given can exponentially stabilize the dynamic system and make the distance between two robots be greater than or equal to the collision free safe distance. The application of it to two omni directional mobile robots is described. Simulation result shows that the proposed controller is effective.

Three-dimensional Construction and Omni-directional Rolling Analysis of a Novel Frame-like Lattice Modular Robot

Lattice modular robots possess diversity actuation methods, such as electric telescopic rod, gear rack, magnet, robot arm, etc. The researches on lattice modular robots mainly focus on their hardware descriptions and reconfiguration algorithms. Meanwhile, their design architectures and actuation methods perform slow telescopic and moving speeds, relative low actuation force verse weight ratio, and without internal space to carry objects. To improve the mechanical performance and reveal the locomotion and reconfiguration binary essences of the lattice modular robots, a novel cube-shaped, frame-like, pneumatic-based reconfigurable robot module called pneumatic expandable cube（PE-Cube） is proposed. The three-dimensional（3D） expanding construction and omni-directional rolling analysis of the constructed robots are the main focuses. The PE-Cube with three degrees of freedom（Do Fs） is assembled by replacing the twelve edges of a cube with pneumatic cylinders. The proposed symmetric construction condition makes the constructed robots possess the same properties in each supporting state, and a binary control strategy cooperated with binary actuator（pneumatic cylinder） is directly adopted to control the PE-Cube. Taking an eight PE-Cube modules＇ construction as example, its dynamic rolling simulation, static rolling condition, and turning gait are illustrated and discussed. To testify telescopic synchronization, respond speed, locomotion feasibility, and repeatability and reliability of hardware system, an experimental pneumatic-based robotic system is built and the rolling and turning experiments of the eight PE-Cube modules＇ construction are carried out. As an extension, the locomotion feasibility of a thirty-two PE-Cube modules＇ construction is analyzed and proved, including dynamic rolling simulation, static rolling condition, and dynamic analysis in free tipping process. The proposed PE-Cube module, construction method, and locomotion analysis enrich the family of the lattice modular robot and provide the instruction to design the lattice modular robot.

基于RobotStudio的视觉分拣打磨工作站仿真设计

为解决中小型零件混流自动化生产等问题,提出基于RobotStudio的工业机器人视觉分拣打磨工作站的仿真设计方案。根据零件的生产工艺流程,利用UG软件创建视觉分拣打磨工作站的整体布局;通过分析工作站各个模块功能,设计了各模块的结构;利用RobotStudio软件构建了工作站仿真模型。以视觉引导Smart组件和输送链跟踪仿真为例,阐述了ABB工业机器人通过视觉引导获取工件空间位姿的四元数和欧拉角的转换方法,并介绍了视觉拍照、机器人与工业相机通信等动态仿真的设置过程,以及输送链跟踪动态效果的设置方法。为实现工作站全过程仿真,设计了整体工作站逻辑,编制了仿真工作站离线程序,并将仿真工作站同步到实验平台调试验证。该设计可为智能制造生产线的设计、制造及应用提供参考。

Global Inverse Optimal Tracking Control of Underactuated Omni-directional Intelligent Navigators （ODINs）

This paper presents a design of optimal controllers with respect to a meaningful cost function to force an underactuated omni-directional intelligent navigator （ODIN） under unknown constant environmental loads to track a reference trajectory in two-dimensional space. Motivated by the vehicle＇s steering practice, the yaw angle regarded as a virtual control plus the surge thrust force are used to force the position of the vehicle to globally track its reference trajectory. The control design is based on several recent results developed for inverse optimal control and stability analysis of nonlinear systems, a new design of bounded disturbance observers, and backstepping and Lyapunov＇s direct methods. Both state- and output-feedback control designs are addressed. Simulations are included to illustrate the effectiveness of the proposed results.

The evolution of robotics:research and application progress of dental implant robotic systems

The use of robots to augment human capabilities and assist in work has long been an aspiration.Robotics has been developing since the 1960s when the first industrial robot was introduced.As technology has advanced,robotic-assisted surgery has shown numerous advantages,including more precision,efficiency,minimal invasiveness,and safety than is possible with conventional techniques,which are research hotspots and cutting-edge trends.This article reviewed the history of medical robot development and seminal research papers about current research progress.Taking the autonomous dental implant robotic system as an example,the advantages and prospects of medical robotic systems would be discussed which would provide a reference for future research.

基于Robotstudio的工业机器人课程教学设计与实践

阐述工业机器人实训课程教学实践,将Robotstudio软件融入课程教学中,探讨以实例项目驱动的教学内容设计,以虚实结合手段提升课堂教学效果的教学模式,从而实现教学与实践的统一。

基于Robot Studio的分类码垛仿真设计

针对工业机器人轨迹规划和自动化生产协调难度大的问题,提出一种基于Robot Studio的分类码垛仿真设计方案。使用Robot Studio软件,创建工业机器人仿真工作站。通过Smart组件的设计、I/O信号的设定、工作站逻辑的建立和程序编写等工作,最终实现工业机器人智能分类码垛操作。经过模拟仿真,结果表明:分类码垛的速度和准确率均可达到预期要求。说明该分类码垛设计方案可行,可以为实际码垛工作站的搭建和生产提供一定的现实指导。

AlGaInP thin-film LED with omni-directionally reflector and ITO transparent conducting n-type contact

In this paper a novel A1GalnP thin-film light-emitting diode （LED） with omni-directionally reflector （ODR） and transparent conducting indium tin oxide （ITO） n-type contact structure is proposed, and fabrication process is developed. This reflector is realized with the combination of a low-refractive-index dielectric layer and a high reflectivity metal layer. This allows the light emitted or internally reflected downwardly towards the GaAs substrate at any angle of incidence to be reflected towards the top surface of the chip. ITO n-type contact is used for anti-reflection and current spreading layers on the ODR-LED with ITO. The sheet resistance of the ITO films （95 nm） deposited on n- ohmic contact of ODR-LED is of the order 23.5Ω/△ with up to 90% transmittance （above 92% for 590-770 nm） in the visible region of the spectrum. The optical and electrical characteristics of the ODR-LED with ITO are presented and compared to conventional AS-LED and ODR-LED without ITO. It is shown that the light output from the ODR-LED with ITO at forward current 20mA exceeds that of AS-LED and ODR-LED without ITO by about a factor of 1.63 and 0.16, respectively. A favourable luminous intensity of 218.3 mcd from the ODR-LED with ITO （peak wavelength 620 nm） could be obtained under 20 mA injection, which is 2.63 times and 1.21 times higher than that of AS-LED and ODR-LED without ITO, respectively.

Neuromorphic circuits based on memristors: endowing robots with a human-like brain

Robots are widely used,providing significant convenience in daily life and production.With the rapid development of artificial intelligence and neuromorphic computing in recent years,the realization of more intelligent robots through a pro-found intersection of neuroscience and robotics has received much attention.Neuromorphic circuits based on memristors used to construct hardware neural networks have proved to be a promising solution of shattering traditional control limita-tions in the field of robot control,showcasing characteristics that enhance robot intelligence,speed,and energy efficiency.Start-ing with introducing the working mechanism of memristors and peripheral circuit design,this review gives a comprehensive analysis on the biomimetic information processing and biomimetic driving operations achieved through the utilization of neuro-morphic circuits in brain-like control.Four hardware neural network approaches,including digital-analog hybrid circuit design,novel device structure design,multi-regulation mechanism,and crossbar array,are summarized,which can well simulate the motor decision-making mechanism,multi-information integration and parallel control of brain at the hardware level.It will be definitely conductive to promote the application of memristor-based neuromorphic circuits in areas such as intelligent robotics,artificial intelligence,and neural computing.Finally,a conclusion and future prospects are discussed.

Intervention Effect of Lower Limb Rehabilitation Robot with Task-Oriented Training on Stroke Patients and Its Influence on KFAROM Score

Objective: To explore the effect of lower limb rehabilitation robot combined with task-oriented training on stroke patients and its influence on KFAROM score. Methods: 100 stroke patients with hemiplegia admitted to our hospital from January 2023 to December 2023 were randomly divided into two groups, the control group (50 cases) was given task-oriented training assisted by nurses, and the observation group (50 cases) was given lower limb rehabilitation robot with task-oriented training. Lower limb balance, lower limb muscle strength, motor function, ankle function, knee flexion range of motion and walking ability were observed. Results: After treatment, the scores of BBS, quadriceps femoris and hamstrings in the observation group were significantly higher than those in the control group (P Conclusion: In the clinical treatment of stroke patients, the combination of task-oriented training and lower limb rehabilitation robot can effectively improve the lower limb muscle strength, facilitate the recovery of balance function, and have a significant effect on the recovery of motor function, which can improve the walking ability of stroke patients and the range of motion of knee flexion, and achieve more ideal therapeutic effectiveness.

Treatment of hemolymphangioma by robotic surgery: A case report

BACKGROUND Hemolymphangioma of the jejunum is rare and lacks clinical specificity,and can manifest as gastrointestinal bleeding,abdominal pain,and intestinal obstruction.Computed tomography,magnetic resonance imaging,and other examinations show certain characteristics of the disease,but lack accuracy.Although capsule endoscopy and enteroscopy make up for this deficiency,the diagnosis also still re-quires pathology.CASE SUMMARY A male patient was admitted to the hospital due to abdominal distension and abdominal pain,but a specific diagnosis by computed tomography examination was not obtained.Partial resection of the small intestine was performed by robotic surgery,and postoperative pathological biopsy confirmed the diagnosis of hemo-lymphangioma.No recurrence in the follow-up examination was observed.CONCLUSION Robotic surgery is an effective way to treat hemolymphangioma through minima-lly invasive techniques under the concept of rapid rehabilitation.

Summarizing the evidence for robotic-assisted bladder neck reconstruction: Systematic review of patency and incontinence outcomes

Objective:Bladder neck contracture and vesicourethral anastomotic stenosis are difficult to manage endoscopically,and open repair is associated with high rates of incontinence.In recent years,there have been increasing reports of robotic-assisted bladder neck reconstruction in the literature.However,existing studies are small,heterogeneous case series.The objective of this study was to perform a systematic review of robotic-assisted bladder neck reconstruction to better evaluate patency and incontinence outcomes.Methods:We performed a systematic review of PubMed from first available date to May 2023 for all studies evaluating robotic-assisted reconstructive surgery of the bladder neck in adult men.Articles in non-English,author replies,editorials,pediatric-based studies,and reviews were excluded.Outcomes of interest were patency and incontinence rates,which were pooled when appropriate.Results:After identifying 158 articles on initial search,we included only ten studies that fit all aforementioned criteria for robotic-assisted bladder neck reconstruction.All were case series published from March 2018 to March 2022 ranging from six to 32 men,with the median follow-up of 5e23 months.A total of 119 patients were included in our analysis.A variety of etiologies and surgical techniques were described.Patency rates ranged from 50%to 100%,and pooled patency was 80%(95/119).De novo incontinence rates ranged from 0%to 33%,and pooled incontinence was 17%(8/47).Our findings were limited by small sample sizes,relatively short follow-ups,and heterogeneity between studies.

Adaptive Trajectory Tracking Control for Nonholonomic Wheeled Mobile Robots:A Barrier Function Sliding Mode Approach

The trajectory tracking control performance of nonholonomic wheeled mobile robots(NWMRs)is subject to nonholonomic constraints,system uncertainties,and external disturbances.This paper proposes a barrier function-based adaptive sliding mode control(BFASMC)method to provide high-precision,fast-response performance and robustness for NWMRs.Compared with the conventional adaptive sliding mode control,the proposed control strategy can guarantee that the sliding mode variables converge to a predefined neighborhood of origin with a predefined reaching time independent of the prior knowledge of the uncertainties and disturbances bounds.Another advantage of the proposed algorithm is that the control gains can be adaptively adjusted to follow the disturbances amplitudes thanks to the barrier function.The benefit is that the overestimation of control gain can be eliminated,resulting in chattering reduction.Moreover,a modified barrier function-like control gain is employed to prevent the input saturation problem due to the physical limit of the actuator.The stability analysis and comparative experiments demonstrate that the proposed BFASMC can ensure the prespecified convergence performance of the NWMR system output variables and strong robustness against uncertainties/disturbances.

A New Compact Omni-Directional Quasi-Self-Complementary Antenna for Wireless Communication Systems

This article describes a new miniaturized omni-directional antenna with quasi-self-complementary structure for wireless communication applications. A novel ground structure composed of five rectangular plates is proposed to enhance the impedance bandwidth and reduce the antenna size. The proposed antenna is comprised of two patches surrounded by the ground structure. Two metal patches of the antenna are located on two opposite sides of the dielectric substrate. The feed patch is used to excite the radiation patch. This unique design is realized by properly choosing the suitable feed patch shape, selecting similar slot shape on the radiation patch, and tuning their dimensions. The proposed antenna with an extremely small size of 6 mm × 9 mm has an operating impedance bandwidth ranging from 4.5 to 6.1 GHz for S11 < -10 dB, which also covers the two IEEE 802.11a wireless local area network bands (5.15 - 5.35 GHz and 5.725 - 5.825 GHz). In addition to be very small in size, the antenna exhibits omni-directional radiation patterns in the entire operating bandwidth and low cross polarization. The distortionless time domain performance of the antenna is confirmed by investigation of the phase response and group delay. The obtained results in both frequency and time domain show that the proposed antenna is suitable for use in wireless communication systems.

A finite-time fuzzy adaptive output-feedback fault-tolerant control for underactuated wheeled mobile robots systems

This paper investigates the adaptive fuzzy finite-time output-feedback fault-tolerant control (FTC) problemfor a class of nonlinear underactuated wheeled mobile robots (UWMRs) system with intermittent actuatorfaults. The UWMR system includes unknown nonlinear dynamics and immeasurable states. Fuzzy logic systems(FLSs) are utilized to work out immeasurable functions. Furthermore, with the support of the backsteppingcontrol technique and adaptive fuzzy state observer, a fuzzy adaptive finite-time output-feedback FTC scheme isdeveloped under the intermittent actuator faults. It is testifying the scheme can ensure the controlled nonlinearUWMRs is stable and the estimation errors are convergent. Finally, the comparison results and simulationvalidate the effectiveness of the proposed fuzzy adaptive finite-time FTC approach.

Robotic surgery in living liver donors and liver recipients

There have been nearly 60 years since Thomas Starzl’s first liver transplant.During this period,advancements in medical technology have progressively enabled the adoption of new methods for transplantation.Among these innovations,robotic surgery has emerged in recent decades and is gradually being integrated into transplant medicine.Robotic hepatectomy and liver implantation represent significant advancements in the field of transplant surgery.The precision and minimally invasive nature of robotic surgery offer substantial benefits for both living donors and recipients.In living donors,robotic hepatectomy reduces postoperative pain,minimizes scarring,and accelerates recovery.For liver recipients,robotic liver implantation enhances surgical accuracy,leading to better graft positioning and vascular anastomosis.Robotic systems provide more precise and maneuverable control of instruments,allowing surgeons to perform complex procedures with greater accuracy and reduced risk to patients.This review encompasses publications on minimally invasive donor liver surgery,with a specific focus on robotic liver resection in transplantation,and aims to summarize current knowledge and the development status of robotic surgery in liver transplantation,focusing on liver resection in donors and graft implantation in recipients.

Managerial perspectives of scaling up robotic-assisted surgery in healthcare systems:A systematic literature review

Objectives Robotic-assisted surgery(RAS)is a minimally invasive technique practiced in multiple specialties.Standard training is essential for the acquisition of RAS skills.The cost of RAS is considered to be high,which makes it a burden for institutes and unaffordable for patients.This systematic literature review(SLR)focused on the various RAS training methods applied in different surgical specialties,as well as the cost elements of RAS,and was to summarize the opportunities and challenges associated with scaling up RAS.Methods An SLR was carried out based on the Preferred Reporting Items for Systematic reviews and Meta-Analyses reporting guidelines.The PubMed,EBSCO,and Scopus databases were searched for reports from January 2018 through January 2024.Full-text reviews and research articles in the English language from Asia-Pacific countries were included.Articles that outlined training and costs associated with RAS were chosen.Results The most common training system is the da Vinci system.The simulation technique,which includes dry-lab,wet-lab,and virtual reality training,was found to be a common and important practice.The cost of RAS encompasses the installation and maintenance costs of the robotic system,the operation theatre rent,personnel cost,surgical instrument and material cost,and other miscellaneous charges.The synthesis of SLR revealed the challenges and opportunities regarding RAS training and cost.Conclusions The results of this SLR will help stakeholders such as decision-makers,influencers,and end users of RAS to understand the significance of training and cost in scaling up RAS from a managerial perspective.For any healthcare innovation to reach a vast population,cost-effectiveness and standard training are crucial.

Direct 4D printing of functionally graded hydrogel networks for biodegradable,untethered,and multimorphic soft robots

Recent advances in functionally graded additive manufacturing(FGAM)technology have enabled the seamless hybridization of multiple functionalities in a single structure.Soft robotics can become one of the largest beneficiaries of these advances,through the design of a facile four-dimensional(4D)FGAM process that can grant an intelligent stimuli-responsive mechanical functionality to the printed objects.Herein,we present a simple binder jetting approach for the 4D printing of functionally graded porous multi-materials(FGMM)by introducing rationally designed graded multiphase feeder beds.Compositionally graded cross-linking agents gradually form stable porous network structures within aqueous polymer particles,enabling programmable hygroscopic deformation without complex mechanical designs.Furthermore,a systematic bed design incorporating additional functional agents enables a multi-stimuli-responsive and untethered soft robot with stark stimulus selectivity.The biodegradability of the proposed 4D-printed soft robot further ensures the sustainability of our approach,with immediate degradation rates of 96.6%within 72 h.The proposed 4D printing concept for FGMMs can create new opportunities for intelligent and sustainable additive manufacturing in soft robotics.

Smart Gait:A Gait Optimization Framework for Hexapod Robots

The current gait planning for legged robots is mostly based on human presets,which cannot match the flexible characteristics of natural mammals.This paper proposes a gait optimization framework for hexapod robots called Smart Gait.Smart Gait contains three modules:swing leg trajectory optimization,gait period&duty optimization,and gait sequence optimization.The full dynamics of a single leg,and the centroid dynamics of the overall robot are considered in the respective modules.The Smart Gait not only helps the robot to decrease the energy consumption when in locomotion,mostly,it enables the hexapod robot to determine its gait pattern transitions based on its current state,instead of repeating the formalistic clock-set step cycles.Our Smart Gait framework allows the hexapod robot to behave nimbly as a living animal when in 3D movements for the first time.The Smart Gait framework combines offline and online optimizations without any fussy data-driven training procedures,and it can run efficiently on board in real-time after deployment.Various experiments are carried out on the hexapod robot LittleStrong.The results show that the energy consumption is reduced by 15.9%when in locomotion.Adaptive gait patterns can be generated spontaneously both in regular and challenge environments,and when facing external interferences.

Assistive Robotics for Upper Limb Physical Rehabilitation:A Systematic Review and Future Prospects

Physical assistive robotics are oriented to support and improve functional capacities of people.In physical rehabilitation,robots are indeed useful for functional recovery of affected limb.However,there are still open questions related to technological aspects.This work presents a systematic review of upper limb rehabilitation robotics in order to analyze and establish technological challenges and future directions in this area.A bibliometric analysis was performed for the systematic literature review.Literature from the last six years,conducted between August 2020 and May 2021,was reviewed.The methodology for the literature search and a bibliometric analysis of the metadata are presented.After a preliminary search resulted in 820 articles,a total of 66 articles were included.A concurrency network and bibliographic analysis were provided.And an analysis of occurrences,taxonomy,and rehabilitation robotics reported in the literature is presented.This review aims to provide to the scientific community an overview of the state of the art in assistive robotics for upper limb physical rehabilitation.The literature analysis allows access to a gap of unexplored options to define the technological prospects applied to upper limb physical rehabilitation robotics.