An accurate numerical algorithm for three-line fault involving different phases from each of two-parallel lines is presented. It is based on one-terminal voltage and current data. The loop and nodel equations comparin...An accurate numerical algorithm for three-line fault involving different phases from each of two-parallel lines is presented. It is based on one-terminal voltage and current data. The loop and nodel equations comparing faulted phase to non-faulted phase of two-parallel lines are introduced in the fault location estimation modal, in which the faulted impedance of remote end is not involved. The effect of load flow and fault resistance on the accuracy of fault location are effectively eliminated, therefore an accurate algorithm of locating fault is derived. The algorithm is demonstrated by digital computer simulations and the results show that errors in locating fault are less than 1%.展开更多
This paper focuses on the new approach of on line monitoring of grinding burn and wheel wear based on the rough set theory. This method adopts the grinding chip flow thermal signal, and acquires identification rules ...This paper focuses on the new approach of on line monitoring of grinding burn and wheel wear based on the rough set theory. This method adopts the grinding chip flow thermal signal, and acquires identification rules by establishing sensitive characteristic parameters and constructing the knowledge system through continuum attribute discretization, attribute reduction and knowledge acquisition, and then monitors grinding burn and wheel wear in accordance with the acquired rules. The experiment results show that the new method is effective.展开更多
A reformed numerical model based on the 'one-line theory' for beach deformation is presented. In this model, the change of beach slope during coastline procession is considered.A wave numerical model combined ...A reformed numerical model based on the 'one-line theory' for beach deformation is presented. In this model, the change of beach slope during coastline procession is considered.A wave numerical model combined with wave refraction, diffraction and reflection is used to simulate wave climate to increase numerical accuracy.The results show that the numerical model has a good precision based on the adequate field data. The results can be applied to practical engineering.展开更多
A new on line titration method and device based on a new technique continuous flow titration is described. By the means of electronically controlled switching of a solenoid valve, the main component of the system, t...A new on line titration method and device based on a new technique continuous flow titration is described. By the means of electronically controlled switching of a solenoid valve, the main component of the system, the equivalent point of the titration is easily determined. Several kinds of mixing tools were examined, whereby a self made mixing chamber with minimum volume gave best results and was therefore used in the device. The error of the titration is within 0.2% and the relative standard deviation (RSD) is below 1.2%. The results show no difference compared with a commercial device, meanwhile the new on line titration system is cheaper and fully automated and thus easy to hand and less solvent consumption.展开更多
A measurement system for high power electrical variables with ultrasonic frequency was established. It can measure the effective values of the voltage and the current, the active power, the phase difference of voltage...A measurement system for high power electrical variables with ultrasonic frequency was established. It can measure the effective values of the voltage and the current, the active power, the phase difference of voltage and current, the frequency of the transducer during ultrasonic welding and cutting. In sampling circuits of the system, the measured current is sensed by using a no capacitance and no inductance precision resistor and is treated with a difference amplifier, the measured voltage is processed by using a proportional amplifier. For achieving good amplitude frequency characteristics and rapid measurement of high frequency signals, the resistors, capacitors and amplifiers used in the system are rationally selected. Calibrating experiments show that relative errors are less than 1% for voltage and current effective values and less than 2.5% for active power, and absolute errors are ±1 Hz for frequency and ±1.7° for phase difference of voltage and current in the range of 17～23 kHz .展开更多
This paper focuses on a state sharing method for an artificial neural network (ANN) and hidden Markov model (HMM) hybrid on line handwriting recognition system. A modeling precision based distance measure is proposed ...This paper focuses on a state sharing method for an artificial neural network (ANN) and hidden Markov model (HMM) hybrid on line handwriting recognition system. A modeling precision based distance measure is proposed to describe similarity between two ANNs, which are used as HMM state models. Limiting maximum system performance loss, a minimum quantification error aimed hierarchical clustering algorithm is designed to choose the most representative models. The system performance is improved by about 1.5% while saving 40% of the system expense. About 92% of the performance may also be maintained while reducing 70% of system parameters. The suggested method is quite useful for designing pen based interface for various handheld devices.展开更多
Spatial straight line mechanisms are a class of spatial mechanisms whose end-effectors generate the trajectory with the form of exact straight lines, which have potential applications in many industrial sectors. This ...Spatial straight line mechanisms are a class of spatial mechanisms whose end-effectors generate the trajectory with the form of exact straight lines, which have potential applications in many industrial sectors. This study aims to synthesis the spatial straight line mechanisms with only revolute joints, meaning that no prismatic joints are included. According to the generalized function sets and the law of one dimensional rotation, the type of compositions of characteristic and the corresponding conditions are derived. Furthermore, some novel symmetrical and asymmetrical spatial straight line mechanisms are synthesized through assembling specific kinematic chains under the corresponding conditions. Finally, several synthesized spatial straight line mechanisms are illustrated to show the effectiveness of the synthesis methodology.展开更多
文摘An accurate numerical algorithm for three-line fault involving different phases from each of two-parallel lines is presented. It is based on one-terminal voltage and current data. The loop and nodel equations comparing faulted phase to non-faulted phase of two-parallel lines are introduced in the fault location estimation modal, in which the faulted impedance of remote end is not involved. The effect of load flow and fault resistance on the accuracy of fault location are effectively eliminated, therefore an accurate algorithm of locating fault is derived. The algorithm is demonstrated by digital computer simulations and the results show that errors in locating fault are less than 1%.
文摘This paper focuses on the new approach of on line monitoring of grinding burn and wheel wear based on the rough set theory. This method adopts the grinding chip flow thermal signal, and acquires identification rules by establishing sensitive characteristic parameters and constructing the knowledge system through continuum attribute discretization, attribute reduction and knowledge acquisition, and then monitors grinding burn and wheel wear in accordance with the acquired rules. The experiment results show that the new method is effective.
文摘A reformed numerical model based on the 'one-line theory' for beach deformation is presented. In this model, the change of beach slope during coastline procession is considered.A wave numerical model combined with wave refraction, diffraction and reflection is used to simulate wave climate to increase numerical accuracy.The results show that the numerical model has a good precision based on the adequate field data. The results can be applied to practical engineering.
文摘A new on line titration method and device based on a new technique continuous flow titration is described. By the means of electronically controlled switching of a solenoid valve, the main component of the system, the equivalent point of the titration is easily determined. Several kinds of mixing tools were examined, whereby a self made mixing chamber with minimum volume gave best results and was therefore used in the device. The error of the titration is within 0.2% and the relative standard deviation (RSD) is below 1.2%. The results show no difference compared with a commercial device, meanwhile the new on line titration system is cheaper and fully automated and thus easy to hand and less solvent consumption.
基金This work has been carried out with the support of National Natural Science Foundation(No.59675054)
文摘A measurement system for high power electrical variables with ultrasonic frequency was established. It can measure the effective values of the voltage and the current, the active power, the phase difference of voltage and current, the frequency of the transducer during ultrasonic welding and cutting. In sampling circuits of the system, the measured current is sensed by using a no capacitance and no inductance precision resistor and is treated with a difference amplifier, the measured voltage is processed by using a proportional amplifier. For achieving good amplitude frequency characteristics and rapid measurement of high frequency signals, the resistors, capacitors and amplifiers used in the system are rationally selected. Calibrating experiments show that relative errors are less than 1% for voltage and current effective values and less than 2.5% for active power, and absolute errors are ±1 Hz for frequency and ±1.7° for phase difference of voltage and current in the range of 17～23 kHz .
文摘This paper focuses on a state sharing method for an artificial neural network (ANN) and hidden Markov model (HMM) hybrid on line handwriting recognition system. A modeling precision based distance measure is proposed to describe similarity between two ANNs, which are used as HMM state models. Limiting maximum system performance loss, a minimum quantification error aimed hierarchical clustering algorithm is designed to choose the most representative models. The system performance is improved by about 1.5% while saving 40% of the system expense. About 92% of the performance may also be maintained while reducing 70% of system parameters. The suggested method is quite useful for designing pen based interface for various handheld devices.
基金National Basic Research Program of China (973 Program,No.2006CB705402)National Science and Technology Major Project,China(No.2009ZX04013-021)National Natural Science Foundation of China (No.51008288)
文摘Spatial straight line mechanisms are a class of spatial mechanisms whose end-effectors generate the trajectory with the form of exact straight lines, which have potential applications in many industrial sectors. This study aims to synthesis the spatial straight line mechanisms with only revolute joints, meaning that no prismatic joints are included. According to the generalized function sets and the law of one dimensional rotation, the type of compositions of characteristic and the corresponding conditions are derived. Furthermore, some novel symmetrical and asymmetrical spatial straight line mechanisms are synthesized through assembling specific kinematic chains under the corresponding conditions. Finally, several synthesized spatial straight line mechanisms are illustrated to show the effectiveness of the synthesis methodology.
