Thinking about Value Realization of Ecological Products under the Background of Urban-rural Integration in Chengdu“Western Control”Area

Chengdu's development strategy of“western control”has laid a solid ecological background for 8 western districts,cities and counties and cultivated good ecological resources.The integrated urban-rural development in the new era will realize the balanced development of urban and rural areas and give full play to the value of rural ecological resources through the“powerful combination”of urban and rural areas.To realize the urban-rural integration and high-quality rural development in Chengdu“western control”area,it is necessary to enhance the awareness of ecological resources and ecological products,and carry out unified planning of ecological infrastructure,ecological material products and ecological service products in the whole“western control”area.Meantime,ecological restoration must be carried out scientifically,and scene design for value transformation of ecological products should be implemented innovatively.

Determination of Monitoring Control Value for Concrete Gravity Dam Spatial Deformation Based on POT Model

Deformation can directly reflect the working behavior of the dam,so determining the deformation monitoring control value can effectively monitor the safety of dam operation.The traditional dam deformation monitoring control value only considers the single measuring point.In order to overcome the limitation,this paper presents a new method to determine the monitoring control value for concrete gravity dam based on the deformations of multi-measuring points.A dam’s comprehensive deformation displacement is determined by the measured values at different measuring points on the positive inverted vertical line and the corresponding weight of eachmeasuring point.The projection pursuit method(PPM)combined with the grey wolf optimization(GWO)algorithm is used to determine the weight of each measuring point according to the spatial correlation distribution characteristics of dam deformation.The peaks over threshold(POT)model based on the extreme value theory is adopted to determine the monitoring control value with the obtained dam comprehensive deformation displacement.In addition,the POTmodel is improved with the automatic threshold determinationmethod based on the 3σcriterion in probability theory and the GWO algorithm,which can avoid subjectivity and randomness in determining the threshold.The results of the engineering application show the feasibility and applicability of the proposed method.

Series-parallel Hybrid Vehicle Control Strategy Design and Optimization Using Real-valued Genetic Algorithm

Despite the series-parallel hybrid electric vehicle inherits the performance advantages from both series and parallel hybrid electric vehicle, few researches about the series-parallel hybrid electric vehicle have been revealed because of its complex co nstruction and control strategy. In this paper, a series-parallel hybrid electric bus as well as its control strategy is revealed, and a control parameter optimization approach using the real-valued genetic algorithm is proposed. The optimization objective is to minimize the fuel consumption while sustain the battery state of charge, a tangent penalty function of state of charge（SOC） is embodied in the objective function to recast this multi-objective nonlinear optimization problem as a single linear optimization problem. For this strategy, the vehicle operating mode is switched based on the vehicle speed, and an ＂optimal line＂ typed strategy is designed for the parallel control. The optimization parameters include the speed threshold for mode switching, the highest state of charge allowed, the lowest state of charge allowed and the scale factor of the engine optimal torque to the engine maximum torque at a rotational speed. They are optimized through numerical experiments based on real-value genes, arithmetic crossover and mutation operators. The hybrid bus has been evaluated at the Chinese Transit Bus City Driving Cycle via road test, in which a control area network-based monitor system was used to trace the driving schedule. The test result shows that this approach is feasible for the control parameter optimization. This approach can be applied to not only the novel construction presented in this paper, but also other types of hybrid electric vehicles.

Diagnostic value of interleukin-8 in colorectal cancer:A case-control study and meta-analysis

AIM:To assess the diagnostic value of serum interleukin-8(IL-8)in the detection of colorectal cancer(CRC).METHODS:An original study was conducted to explore the potential value of IL-8 in CRC diagnosis.Receiver operating characteristic(ROC)analysis was performed and the area under the curve(AUC)value was calculated.PUBMED and EMBASE were searched(to October,2013),supplemented with manual screening for relevant publications.Meta-analysis methods were applied to pool sensitivity,specificity,positive and negative likelihood ratios,and diagnostic odds ratios and to construct a summary receiver-operating characteristic(s ROC)curve.Heterogeneity across studies was checked by the I2 test and Deek’s funnel plot method was applied to test publication bias.RESULTS:In our original study,serum IL-8 yielded an AUC of 0.742[95%CI:0.635-0.849].The sensitivity and specificity were 85.42%and 54.05%,respectively,at a cut-off value of 5.39.In this meta-analysis,we included five studies with 668 CRC patients and 374controls and one study in our own center with 48 CRC patients and 37 controls.The pooled sensitivity and specificity of IL-8 were 0.69(95%CI:0.42-0.87)and0.85(95%CI:0.68-0.94)for CRC detection.Besides,the area under the s ROC curve was 0.86(95%CI:0.82-0.88).Subgroup analysis suggested that there was no heterogeneity in the Asian subgroup but some in the European subgroup.In addition,no publication bias was found according to the Deek’s funnel plot asymmetry test.CONCLUSION:Serum IL-8 is a promising biomarker for CRC detection and may become a clinically useful tool to identify high-risk patients.

Decentralized robust H-infinity descriptor output feedback control for value-bounded uncertain descriptor large-scale systems

For a class of value-bounded uncertain descriptor large-scale interconnected systems, the decentralized robust H∞ descriptor output feedback control problem is investigated. A design method based on the bounded real lemma is developed for a decentralized descriptor dynamic output feedback controller, which is reduced to a feasibility problem for a nonlinear matrix inequality （NLMI）. It is proposed to solve the NLMI iteratively by the idea of homotopy, where some of the variables are fixed alternately at each iteration to reduce the NLMI to a linear matrix inequality （LMI）. A given example shows the efficiency of this method .

Consensus Control With a Constant Gain for Discrete-time Binary-valued Multi-agent Systems Based on a Projected Empirical Measure Method

This paper studies the consensus control of multiagent systems with binary-valued observations.An algorithm alternating estimation and control is proposed.Each agent estimates the states of its neighbors based on a projected empirical measure method for a holding time.Based on the estimates,each agent designs the consensus control with a constant gain at some skipping time.The states of the system are updated by the designed control,and the estimation and control design will be repeated.For the estimation,the projected empirical measure method is proposed for the binary-valued observations.The algorithm can ensure the uniform boundedness of the estimates and the mean square error of the estimation is proved to be at the order of the reciprocal of the holding time(the same order as that in the case of accurate outputs).For the consensus control,a constant gain is designed instead of the stochastic approximation based gain in the existing literature for binary-valued observations.And,there is no need to make modification for control since the uniform boundedness of the estimates ensures the uniform boundedness of the agents’states.Finally,the systems updated by the designed control are proved to achieve consensus and the consensus speed is faster than that in the existing literature.Simulations are given to demonstrate the theoretical results.

基于x-LMS算法的直升机主动消振电力作动器系统研究

直升机前飞时,气动环境会导致不同方位角的桨叶出现气动载荷的瞬间不对称,通过基础结构传递会在机身形成大幅度的低频振动。为了消除多方向幅值变化的振动力,利用结构响应主动控制原理,设计了基于x-LMS算法的主动消振电力作动器系统,并进行了减振实验。首先,通过比较确定了单台作动器中两台电机同向旋转的方案。通过两台作动器的组合使用,推导出输出力的数学模型。其次,采用负载相位差交叉耦合的控制策略设计系统控制框图。针对存在耦合的相位外环,通过回差阵特征值法确定满足系统稳定裕度要求的参数范围,再根据灵敏度函数和输入跟踪性能在所得的参数稳定域内寻找最优解。然后,提出了基于x-LMS算法的直升机主动振动控制系统,并通过仿真验证了该系统的减振效果。最后,研制的实验样机进行了动稳态实验以及减振实验,验证了系统的实际减振效果。

数字金融、内部控制与企业价值——基于2012-2021年中国制造业A股上市公司的经验数据

文章以2012—2021年A股制造类上市公司为样本,用数字普惠金融指数衡量数字金融的发展水平,采用多元回归模型验证数字金融对制造类企业价值的影响,并探究内部控制在其中的中介作用。实证结果表明:数字金融会显著提高制造类企业价值;企业内部控制在数字金融对企业价值的影响中发挥着中介效应;数字金融对非国有制造类企业价值的影响更显著,并且企业内部控制在其中仍然发挥着中介作用。

Simulation Study on Heat Value Control System of Natural Gas Used for Color TV Tubes Production

In order to know the character of the heat value control system, determine the influence of natural gas quality and flow on the heat value, and learn how to adjust the parameters of control system, the model of the whole system is established, and simulation of the system is adopted in Matlab/Simulink. The simulation result shows that the feedback system with feed-forward block controls the heat value very well, and the simulation result can effectively guide the engineering design of the heat value control system, and the efficiency of engineering is improved.

An Upper Limit for Iterative Learning Control Initial Input Construction Using Singular Values

Selecting a proper initial input for Iterative Learning Control (ILC) algorithms has been shown to offer faster learning speed compared to the same theories if a system starts from blind. Iterative Learning Control is a control technique that uses previous successive projections to update the following execution/trial input such that a reference is followed to a high precision. In ILC, convergence of the error is generally highly dependent on the initial choice of input applied to the plant, thus a good choice of initial start would make learning faster and as a consequence the error tends to zero faster as well. Here in this paper, an upper limit to the initial choice construction for the input signal for trial 1 is set such that the system would not tend to respond aggressively due to the uncertainty that lies in high frequencies. The provided limit is found in term of singular values and simulation results obtained illustrate the theory behind.

Non-use value assessment for wetland ecosystem service of Hongxing National Nature Reserve in northeast China

By the contingent value method, we studied the non-use value of wetland ecosystem service of Hongxing National Nature Reserve （HNNR） in Heilongjiang Pro- vince, northeast China. The proportion of respondents willing to pay （WTP） for protection of HNNR was 63 %. The WTP ratio was affected by geographical area, contact nature, personal preferences, and familiar degree of the respondents. The WTP value was affected by age, education level and career of the respondents. The mainly reasons for people rejecting to pay for protecting HNNR were ＂I am not familiar to HNNR＂ and ＂I had no capacity for additional spending because of low income＂. Weighted average individual WTP value was CNY 59.26 Yuan ind.^-1 year^-1 for all the respondents with WTP. The total non-use ecosystem service value of HNNR was CNY 1430 million Yuan in 2013. The heritage value was highest followed by existence value and option value. From the high ecosystem service value in HNNR, it is very important to construct nature reserve for protecting natural ecosystems and human sustainable use of natural resources.

THE FUZZY NUMERICAL VALUE SIMULATION OF NANOMETER ELECTRO-THERMAL IN HOT-WORKING

The fuzzy numerical value analysis method is adopted for the first time, which solves the problem of nanometer electro-thermal in filming process, The key technique is embodied by controlling the time distribution, temperature and press in the filming process. The concrete technique of filming is showed by establishing the fuzzy mumbership function of above three indexes, which improves the precision of the materials of nanometer electro-thermal in hot-working. At the same time, the principles of the fuzzy relationship mapping inversion （FRMI） is put forward, Therefore, the standardization and continuity can be met.

Accuracy Assignment Study of Tank Fire Control System Based on Value Analysis Method

A method of accuracy assignment based on value analysis method （VAM） in tank fire control system （TFCS） is proposed. From the analysis of primary error sources and their error transfer relationships, the mathematical model is built on the basis of VAM to solve the accuracy assignment problem. Simulation results show the validation and feasibility of the proposed method. It can help designer of tank fire control system work out an optimal system more efficiently and more economically.

微生物-石膏固化铅污染土胶结速率与污染物控制研究

通过微生物-石膏单次搅拌法处理铅污染粉土,以铅污染浓度、钙盐浓度、钙盐种类以及搅拌时长等作为控制参量,探究固化铅污染粉土的工程特性和污染物浸出特性的影响与控制规律。结果表明,以石膏作为钙盐,经微生物固化和稳定化处理后,铅污染粉土的无侧限抗压强度能够由不足40 kPa提高到120 kPa以上;在搅拌时长由30 min增加到120 min后,试样强度提高了30%;铅污染浓度为200 mg/kg的粉土的铅离子浸出值能控制在TCLP限值5 mg/L以下,铅元素的迁移水平显著下降。铅污染粉土中生成的碳酸钙形貌为无定形团聚体和玫瑰状方解石共生结晶体,附着少量碳酸铅结晶。采用石膏钙源能够有效延缓微生物固化铅污染粉土的胶结速率,可为实际工程的原位搅拌工艺应用提供时间条件,同时提升微生物矿化作用对污染土体的胶结效果。

A Control Theoretical Model of Web Service Value Development

This paper describes a control theoretical model of collaborative value development. This model is designed to assist managers in choosing parameters that are critical to the development process in service design and support their Business Model. This methodology uses control system modelling of web-based service value generation implemented in SIMULINK/MATLAB. An application based on public domain Wikipedia data is used to validate and develop the model. A control theoretic model applied to the creation of Wikipedia articles shows very good agreement with Wikipedia published data for the time dependent growth in articles produced, and editors used, well within the variability of parametric data listed publically justifying the principle equations used in the model. This development and fine tuning of the model has been limited by the publically available data. To obtain a more accurate model in this area would need the co-operation of web service organisations to reveal confidential data. This modelling procedure can produce a decision support process for service design and could, with modification be applied much more widely to other choices in service design/implementation, even allowing for user contribution to be evaluated. This work shows how subjective judgements on value and other intangibles need to be continually re-evaluated. Such methodology has not been applied elsewhere to value generation applications. It could be used to rank contributions from co-creators for reward sharing.

A Compact Difference Scheme for Multi-point Boundary Value Problems of Heat Equations

In this paper,a compact difference scheme is established for the heat equations with multi-point boundary value conditions.The truncation error of the difference scheme is O(τ2+h^4),where t and h are the temporal step size and the spatial step size.A prior estimate of the difference solution in a weighted norm is obtained.The unique solvability,stability and convergence of the difference scheme are proved by the energy method.The theoretical statements for the solution of the difference scheme are supported by numerical examples.

Jacobi-Sobolev Orthogonal Polynomialsand Spectral Methods for Elliptic Boundary Value Problems

Generalized Jacobi polynomials with indexes α,β∈ R are introduced and some basic properties are established. As examples of applications,the second- and fourth-order elliptic boundary value problems with Dirichlet or Robin boundary conditions are considered,and the generalized Jacobi spectral schemes are proposed. For the diagonalization of discrete systems,the Jacobi-Sobolev orthogonal basis functions are constructed,which allow the exact solutions and the approximate solutions to be represented in the forms of infinite and truncated Jacobi series. Error estimates are obtained and numerical results are provided to illustrate the effectiveness and the spectral accuracy.

Using Singular Value to Set Output Disturbance Limits to Feedback ILC Control

Iterative Learning Control is an effective way of controlling the errors which act directly on the repetitive system. The stability of the system is the main objective in designing. The Small Gain Theorem is used in the design process of State Feedback ILC. The feedback controller along with the Iterative Learning Control adds an advantage in producing a system with minimal error. The past error and current error feedback Iterative control system are studied with reference to the region of disturbance at the output. This paper mainly focuses on comparing the region of disturbance at the output end. The past error feed forward and current error feedback systems are developed on the singular values. Hence, we use the singular values to set an output disturbance limit for the past error and current error feedback ILC system. Thus, we obtain a result of past error feed forward performing better than the current error feedback system. This implies greater region of disturbance suppression to past error feed forward than the other.

An Academic Summary of the International Seminar on “Comparison of the Human Rights value between the East and the West in Epidemic Prevention and Control”

The international video seminar"Comparison of the Human Rights Values between the East and the West in Epidemic Prevention and Control",hosted by the Institute of Human Rights Law of Huazhong University of Science and Technology,was successfully held on May 30,2020.Against the background of the fight against the CO VID-19 pandemic,this seminar fostered exchanges and discussions on human rights values.As the first country that has contained the epidemic successfully,China shared its experience in the practice of human rights values in epidemic prevention and control,while experts from various countries also shared different human rights values embodied in epidemic prevention and control.This seminar allowed for demonstration of the situation of human rights protection in different countries and regions and exchanges of dilemmas and countermeasures during the specific practice of human rights protection.In the collision of different views and the exchange of multi-dimension dialogues,the seminar called for a sense of a global community of health for all and aimed to foster solidarity and international cooperation for greater contributions to the human rights protection in global epidemic prevention and the development of human rights worldwide.