One-pot three-component synthesis of α-amino nitriles catalyzed by nano powder TiO_2 P 25

A simple and efficient method has been developed for the synthesis ofα-amino nitriles from aldehydes,amines and trimethylsilyl cyanide（Me_3SiCN） in the presence of a catalytic amount of cyanuric acid at room temperature.

One-pot synthesis of bimetallic CeCu-SAPO-34 for high-efficiency selective catalytic reduction of nitrogen oxides with NH_(3) at low temperature

NH_(3) selective catalytic reduction(SCR) has been widely recognized as a promising technique for reducing nitrogen oxides from diesel vehicle exhausts. High-efficiency SCR catalysts that could perform at low temperatures are essential to denitration. In this work, a series of bimetallic CeCu-SAPO-34 molecular sieves were synthesized by one-step hydrothermal method. The Ce Cu-SAPO-34 maintained good crystallinity and a regular hexahedron appearance of Cu-SAPO-34 after introducing Ce species, while exhibiting a higher specific surface area and pore volume. The as-prepared CeCu-SAPO-34 with 0.02%(mass) Ce constituent exhibited the best catalytic activity below 300℃ and a maximum NO_(x) conversion of 99% was attained;the NO_(x) removal rates of more than 68% and 94% were achieved at 150℃ and 200℃, respectively. And the introduction of cerium species in Cu-SAPO-34 improves the low-temperature hydrothermal stability of the catalyst towards NH_(3)-SCR reaction. Additionally, the introduced Ce species could enhance the formation of abundant weak Br?nsted acid centers and promote the synergistic effect between CuO grains and isolated Cu^(2+) to enhance the redox cycle, which benefit the NH_(3)-SCR reaction.This work provides a facile synthesis method of high-efficiency SCR denitration catalysts towards diesel vehicles exhaust treatment under low temperature.

One-pot synthesis and characterization of a new, branched polycarbosilane bearing allyl groups

A highly branched polycarbosilane bearing allyl groups has been prepared by a one-pot synthesis with chloromethyltrichlorosilane, chloromethylmethyldichlorosilane and allyl chloride as the starting materials. The resultant polymer, with the approximate formula [SiH1.2(CH3)0.71(CH2CHCH2)0.09CH2]n, has been characterized by 1H, 13C, and 29Si NMR, GPC, TG and elemental analysis. It could be cross-linked thermally at 170 °C in the absence of oxygen. Pyrolysis of the polymer gave a ceramic with a yield of about 70%.

One-pot synthesis of 1,3,4-oxadiazole-5-thioethers in water

An efficient and environmental-friendly one-pot procedure has been developed for the synthesis of 1,3,4-oxadiazole-5- thioethers by the reaction of acylhydrazine with carbon disulfide and organic halides or α, β-unsaturated carbonyl compounds. The reactions were carried out in water in the presence of potassium phosphate within 2-4 h to afford the expected products in excellent yields.

One-pot synthesis of 2-aminothiazoles in PEG-400

A facile one-pot synthesis of 2-aminothiazoles has been carried in PEG-400 as a greener medium at room temperature.This method avoids the use of lachrymatric a-bromoketones as well as the volatile,toxic organic solvents.

One-pot Synthesis of Lewis Acidic Ionic Liquids for Friedel-Crafts Alkylation

Novel Lewis acidic ionic liquids containing thionyl cations and chloroaluminate anions were obtained by one-pot synthesis for the first time. Their acidities were determined by acetonitrile probe on IR spectrography. The ionic liquids were used as catalyst for Friedel-Crafts alkylation of benzene and 1-dodecene. The turnovers of l-dodecene were higher than 99%. Monoalkylbenzene selectivity was 98%, while the 2-substituent product selectivity was 45%.

Microwave radiation one-pot synthesis of chloropropyl-functionalized mesoporous MCM-41

Chloropropyl-functionalized mesoporous MCM-41（MCM-41-（CH2）3Cl） was synthesized in alkaline medium by the microwave radiation one-pot method, using cetyltrimethy-lammoniumbromide （CTAB） as novel template, tetraethoxysilane （TEOS） as silica source, and chloropropyltriethoxysilane （C1PTES） as the coupling agent. The microstructure of MCM-41-（CH2）3Cl was characterized by the means of X-ray diffraction （XRD）, nitrogen absorption-desorption, Fourier transform infrared spectroscopy （FT-IR）, scanning electron microscopy （SEM）, and transmission electron microscopy （TEM）. The results show that a successful synthesis of MCM-41-（CH2）3Cl with well structure is obtained. The optimal microwave power is 120 W and the best microwave time is 50 rain. The dosage of chloropropyltriethoxysilane on the structure of chloropropyl-functionalzed MCM-41 was also investigated. It is found that the chloropropyltriethoxysilane volume between 0.8 mL and 1.6 mL is favorable for the formation of highly ordered MCM-41-（CH2）3Cl mesostructure.

Facile synthesis of hydrochar-supported catalysts from glucose and its catalytic activity towards the production of functional amines

Since the utilization of abundant biomass to develop advanced materials has become an utmost priority in recent years,we developed two sustainable routes(i.e.,the impregnation method and the one-pot synthesis)to prepare the hydrochar-supported catalysts and tested its catalytic performance on the reductive amination.Several techniques,such as TEM,XRD and XPS,were adopted to characterize the structural and catalytic features of samples.Results indicated that the impregnation method favors the formation of outer-sphere surface complexes with porous structure as well as well-distributed metallic nanoparticles,while the one-pot synthesis tends to form the inner-sphere surface complexes with relatively smooth appearance and amorphous metals.This difference explains the better activity of catalysts prepared by the impregnation method which can selectively convert benzaldehyde to benzylamine with an excellent yield of 93.7%under the optimal reaction conditions;in contrast,the catalyst prepared by the one-pot synthesis only exhibits a low selectivity near to zero.Furthermore,the gram-scale test catalyzed by the same catalysts exhibits a similar yield of benzylamine in comparison to its smaller scale,which is comparable to the previously reported heterogeneous noble-based catalysts.More surprisingly,the prepared catalysts can be expediently recycled by a magnetic bar and remain the satisfying catalytic activity after reusing up to five times.In conclusion,these developed catalysts enable the synthesis of functional amines with excellent selectivity and carbon balance,proving cost-effective and sustainable access to the wide application of reductive amination.

Efficient one-pot synthesis of 1,3-diaryl-3H-benzo[f]chromenes using ferric hydrogensulfate

An efficient and easy method for one-pot three-component synthesis of l,3-disubstituted-3H-benzo[f]chromenes by the condensation of naphtol,aromatic aldehyde derivatives and phenylacetylene in the presence of ferric hydrogensulfate[Fe（HSO4）3], has been described.The catalyst displayed high activity which afforded the corresponding 1,3-disubstituted-3H-benzo[f]chromenes in satisfying yields.Alkyl-substituted phenols were examined and the corresponding benzopyran derivatives were synthesized in moderate yields.Heterogeneous nature of the using catalyst made it reusable for further chemical reactions.

A bifunctional and recyclable catalyst:Amine and ionic liquid grafting on MOFs for the one-pot synthesis of N-aryl oxazolidin-2-ones

A bifunctional heterogeneous catalyst was designed and synthesized,denoted DMEDA/IL–NH2-MIL-101.The structure and physical-chemical characterization of DMEDA/IL–NH2-MIL-101 and its precursors were characterized by SEM,N2 adsorption-desorption,XPS,FT-IR,PXRD,elemental analysis,and TGA techniques.The date showed that the two catalytic components of N,N-dimethylethylenediamine(DMEDA)and 1-butyl-3-methylimidazolium bromide(BmimBr)were chemically immobilized in NH2-MIL-101 nanocages.The amine of DMEDA was grafted onto carrier NH2-MIL-101 by N–Cr coordinate covalent bonds and the ionic liquid of BmimBr(IL(Br-))was anchored in the NH2-MIL-101 nanocages by'ship-in-a-bottle'method,in which the amidogen of NH2-MIL-101 condensed with N,N-carbonyldiimidazole(CDI)firstly,and then alkylated with 1-bromo butane.This novel heterogeneous catalyst with two different active sites can efficiently catalyze the synthesis of N-aryl oxazolidin-2-ones from carbon dioxide(CO2),epoxides,and anilines in one-pot under mild solvent-free conditions.It not only showed good stability and recoverability after five cycles but also exhibited shape selectivity for the substrate due to the synergic catalysis of amine,ionic liquid,and NH2-MIL-101.This novel bifunctional material is a promising solid catalyst for the green synthesis of N-aryl oxazolidin-2-ones.

One-pot synthesis of network supported catalyst using supramolecular gel as template

A simple and general strategy is described for preparing network supported catalyst through a one-pot synthetic procedure using supramolecular gel as template.This procedure directly attaches ligand to support during fabricating the support.Using this strategy,supported CuBr/di-（2-picolyl） amine catalyst with U-shaped fibrillar network was prepared and used in atom transfer radical polymerization of methyl methacrylate.XPS and SEM characterization of the catalyst revealed homogeneous distribution of ligand,sufficient reactive sites,adequate mechanical strength and macroporosity.The polymerization results demonstrated high activity and reusability of such catalyst.This strategy might be extended to other supported catalysts used in column reactors.

Strontium chloride-catalyzed one-pot synthesis of 4(3H)-quinazolinones under solvent-free conditions

Strontium chloride was used as an efficient and recyclable catalyst in one-pot condensation of anthranilic acid, ortho esters and amines leading to the formation of 4（3H）-quinazolinone derivatives in good yields at room temperature under solvent-free conditions.

One-pot synthesis of 2,5-disubstituted-1,3,4-thiadiazoles under ultrasonic irradiation

A facile one-pot synthesis of 2,5-disubstituted-1,3,4-thiadiazoles was achieved by ultrasonic irradiation of a mixture of 1-naphthylacetyl chloride, NH4CNS, CH2Cl2 and PEG-400 for 1.5 h at 10–20 °C and subsequent irradiation for 1.5 h in the presence of N-arylglycine hydrazides. This method requires short time and gives thiadiazoles in high yields.

A new one-pot neat synthesis of 1,2,4-triazol-3-ones through 4-(N,N-dimethylamino) pyridine (DMAP) catalyzed cyclocondensation of ethyl carbazate with aryl nitriles

A new one-pot neat synthesis of some 5-aryl-2,4-dihydro-3H- 1,2,4-triazol-3-ones through cyclocondensation of ethyl carbazate with aryl nitriles catalyzed by DMAP as an efficient and basic nucleophilic catalyst is described.

Solar thermochemical reactionsⅢ:A convenient one-pot synthesis of 1,2,4,5-tetrasubstituted imidazoles catalyzed by high surface area SiO_2 and induced by solar thermal energy

A simple, convenient and efficient method for the synthesis of 1,2,4,5-tetrasubstituted imidazole derivatives using benzoin, an aromatic aldehyde, an aromatic amine in the presence of ammonium acetate catalyzed by high surface area SiO2 and induced by free solar thermal energy was reported. C 2009 Kamal User Sadek. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

One-pot Synthesis of 2,5-Disubstituted Oxazoles Using Poly[styrene(iodosodiacetate)]

Disubstituted oxazoles were prepared conveniently by treatment of aromatic -methyl ketones and nitriles with poly[styrene(iodosodiacetate)] in one-pot process.

A facile one-pot synthesis of new thieno-[2,3-d]pyrimidine-2,4(1H,3H)-dione derivatives

A facile one-pot synthesis of new 3-arylthieno[2,3-d]pyrimidine-2,4（1H,3H）-diones via base-catalyzed cyclocondensation of ethyl 2-amino-4,5-dimethylthiophene-3-carboxylate with aryl isocyanates is described.

One-Pot Synthesis of Dimethyl Carbonate over Basic Zeolite Catalysts

One-pot synthesis of dimethyl carbonate (DMC) from methanol, propylene oxide (PO) and carbon dioxide has been investigated using the basic zeolites as catalysts. Among the zeolites studied, Beta showed the best catalytic performance for DMC production. That the desilication of zeolite structure resulted in a hierarchical porosity of Beta, leading to more amount of KOH can be loaded on the surface of zeolite and therefore enhancing the base strength of the catalyst was proposed to be the reason for improved catalytic performance.

Nano Copper Ferrite Catalyzed Sonochemical, One-Pot Three and Four Component Synthesis of Poly Substituted Imidazoles

A simple, multi component, one-pot method has been reported for the synthesis of poly substituted imidazoles in presence of magnetically separable and recyclable spinel nano copper ferrite as heterogeneous catalyst by the cyclo-condensation of benzil, aromatic aldehyde, ammonium acetate and substituted amines under ultrasonic irradiation. This method of preparation has many advantages compared to those methods which are previously reported in the literature. This methodology offers simple experimental procedure, milder reaction conditions and environmentally benign approach.

Efficient One-pot Synthesis of Pyrrolo[2,1-a]isoquinoline and Pyrrolo[1,2-a]quinoline Derivatives

A one-pot sequential reaction for efficient synthesis of pyrrolo[2,1-a]isoquinoline and pyrrolo[1,2-a]quinoline derivatives has been developed.The reaction included firstly the Cu-catalyzed three-component reaction of isoquinoline（quinoline）,acetylenedicarboxylate and alkynylbenzene and then Cs 2 CO 3-promoted intramolecular cyclization reaction of initially formed 1-alkenyl-2-alkynyl-1,2-dihydroisoquinoline（1,2-dihydroquinoline）.