A novel one-time-programmable memory unit based on Schottky-type p-GaN diode

In this work,a novel one-time-programmable memory unit based on a Schottky-type p-GaN diode is proposed.During the programming process,the junction switches from a high-resistance state to a low-resistance state through Schottky junction breakdown,and the state is permanently preserved.The memory unit features a current ratio of more than 10^(3),a read voltage window of 6 V,a programming time of less than 10^(−4)s,a stability of more than 108 read cycles,and a lifetime of far more than 10 years.Besides,the fabrication of the device is fully compatible with commercial Si-based GaN process platforms,which is of great significance for the realization of low-cost read-only memory in all-GaN integration.

Evaluation of the Effectiveness and Safety of One-Time Endodontics in the Treatment of Chronic Apical Periodontitis with Sinus Tract in Pediatric Deciduous Teeth

Objective:To observe the effectiveness and safety of one-time endodontics in the treatment of chronic apical periodontitis with sinus tract in pediatric deciduous teeth.Methods:109 cases of children with chronic apical periodontitis with sinus tract in the deciduous teeth treated in our hospital from January 2022 to December 2023 were selected and grouped by the randomized numerical table method,with 54 cases in the experimental group and 55 cases in the control group.The experimental group was treated with one-time endodontics and the control group was treated with conventional endodontics.Results:After the treatment,the total effective rate of treatment was higher in the experimental group than in the control group(P<0.05);the incidence of adverse events was lower in the experimental group than in the control group(P<0.05);the satisfaction of the children's family members was higher in the experimental group than in the control group(P<0.05);the pain duration was lower in the experimental group than in the control group(P<0.05).Conclusion:In the experimental group,children with chronic apical periodontitis with sinus tract of the deciduous teeth were given one-time endodontic treatment,and the results of its implementation were relatively good.

One-time fertilization at first flowering improves lint yield and dry matter partitioning in late planted short-season cotton

Cotton producers have substantially reduced their inputs(labor,nutrients,and management)mainly by adopting a shortseason cropping management that is characterized by late sowing,high density,and reduced fertilization with one-time application at the first bloom stage without lint yield reduction.However,it has been hypothesized that one-time fertilization at an earlier growth stage could be a more effective and economic management practice.A two-year field experiment was conducted by applying five fertilizer one-time fertilization at 0(FT1),5(FT2),10(FT3),15(FT4),and 20(FT5)days after the first flower appeared in the field and one three-split fertilizer application taken as the conventional control(FT6),making six treatments altogether.Cotton growth period,biomass accumulation,yield,and its formation were quantified.The results showed that the one-time fertilization did not affect the cotton growth progress as compared to FT6,however,the total crop cycles for FT3–FT5 were 3 days shorter.FT1 produced the highest cotton lint yield(1396 kg ha–1),which was similar to the FT6 but higher than the other treatments,and could be attributed to more bolls per unit area and higher lint percentage.Cotton yield was positively correlated with cotton plant biomass accumulated.FT1 had both the highest average(VT)(193.7 kg ha–1 d–1)and the highest maximum(VM)(220.9 kg ha–1 d–1)rates during the fast biomass accumulation period.These results suggest that one-time fertilizer application at the first flower stage might be an adjustment that is more effective than at first bloom,and allowed for easier decision making for application date due to non counting of plants with flowers is needed.

Reliable Space Pursuing for Reliability-based Design Optimization with Black-box Performance Functions

Reliability-based design optimization （RBDO） is intrinsically a double-loop procedure since it involves an overall optimization and an iterative reliability assessment at each search point. Due to the double-loop procedure, the computational expense of RBDO is normally very high. Current RBDO research focuses on problems with explicitly expressed performance functions and readily available gradients. This paper addresses a more challenging type of RBDO problem in which the performance functions are computation intensive. These computation intensive functions are often considered as a ＂black-box＂ and their gradients are not available or not reliable. On the basis of the reliable design space （RDS） concept proposed earlier by the authors, this paper proposes a Reliable Space Pursuing （RSP） approach, in which RDS is first identified and then gradually refined while optimization is performed. It fundamentally avoids the nested optimization and probabilistic assessment loop. Three well known RBDO problems from the literature are used for testing and demonstrating the effectiveness of the proposed RSP method.

One-time sintering process to modify xLi2MnO3(1-x)LiMO2 hollow architecture and studying their enhanced electrochemical performances

To solve the critical problems of lithium rich cathode materials, e.g., structure instability and short cycle life, we have successfully prepared a ZrO2-coated and Zr-doping xLi2MnO3·(1–x)LiMO2 hollow architecture via one-time sintering process. The modified structural materials as lithium-ion cathodes present good structural stability and superior cycle performance in LIBs. The discharge capacity of the ZrO2-coated and Zr-doped hollow pristine is 220 mAh g-1 at the 20th cycle at 0.2 C(discharge capacity loss, 2.7%)and 150 m Ah g-1 at the 100 th cycle at 1 C(discharge capacity loss, 17.7%), respectively. However, hollow pristine electrode only delivers 203 m Ah g-1 at the 20 th cycle at 0.2 C and 124 mAh g-1 at the 100 th cycle at 1 C, respectively, and the corresponding to capacity retention is 92.2% and 72.8%, respectively.Diffusion coefficients of modified hollow pristine electrode are much higher than that of hollow pristine electrode after 100 cycles(approach to 1.4 times). In addition, we simulate the adsorption reaction of HF on the surface of ZrO2-coated layer by the first-principles theory. The calculations prove that the adsorption energy of HF on the surface of ZrO2-coated layer is about-1.699 e V, and the ZrO2-coated layer could protect the hollow spherical xLi2MnO3·(1–x)LiMO2 from erosion by HF. Our results would be applicable for systematic amelioration of high-performance lithium rich material for anode with the respect of practical application.

Cryptanalysis of the One-Time Proxy Signature Scheme Used in Mobile Agents

We ayptanalyze Kim et. al's one-time proxy signature scheme used in mobileagents, and then a successful forgery is introduced It is showed that a dishonest customer cansuccessfully forge a valid one-time proxy signature by impersonating the stiver Furthermore, he canrequest the server with responsibility for the forged bidding information.

Design of 32 kbit one-time programmable memory for microcontroller units

A 32 kbit OTP(one-time programmable)memory for MCUs(micro-controller units)used in remote controllers was designed.This OTP memory is used for program and data storage.It is required to apply 5.5V to BL(bit-line)and 11V to WL(word-line)for a OTP cell of 0.35μm ETOX(EEPROM tunnel oxide)type by MagnaChip.We use 5V transistors on column data paths to reduce the area of column data paths since they require small areas.In addition,we secure device reliability by using HV(high-voltage)transistors in the WL driver.Furthermore,we change from a static logic to a dynamic logic used for the WL driver in the core circuit.Also,we optimize the WD(write data)switch circuit.Thus,we can implement them with a small-area design.In addition,we implement the address predecoder with a small-area logic circuit.The area of the designed 32 kbit OTP with 5V and HV devices is 674.725μm×258.75μm(=0.1745mm2)and is 56.3% smaller than that using 3.3V devices.

One-time Shaping Technological System of Lightweight Roof Greening

Lightweight roof greening is an important way for improving urban ecological environment and has good ecological and social benefits, but the investment is- too-high for the investors. Therefore, it is necessary to improve the system of lightweight roof greening. This study introduced a lightweight roof greening mode with low cost, simple construction, rapid formation, good economic benefit and convenient curing.

How reliable is the lacrimal scintigraphy report? An interobserver agreement and reliability study

AIM: To assess the inter-observer agreement and reliability as well as intra-observer repeatability for lacrimal scintigraphy(LS) reports with and without considering the irrigation test results.METHODS: A prospective, observational, cross sectional study. Two masked clinicians(lacrimal surgeon and nuclear medicine specialist) independently reported 100 LS images(50 patients of >6 years of age with unilateral anophthalmic socket) in a university hospital. The lacrimal surgeon performed a diagnostic irrigation test and repeated the report of the same LS images 2 y after the first report(intra-observer agreement). A weighted Kappa analysis was performed to determine inter-observer agreement and reliability as well as intra-observer repeatability for the type(normal, partial and complete obstruction) and location(presac, preduct, and intraduct) of the obstruction. Subgroup analysis was also performed with consideration of irrigation test results. RESULTS: A significantly moderate agreement was found between lacrimal surgeon and nuclear medicine specialist for both the type(Kappa=0.55) and location(Kappa=0.48) of obstruction. Agreement values were higher for the type(Kappa=0.61 vs 0.41) and location(Kappa=0.56 vs 0.31) of obstruction in cases with normal than abnormal irrigation test. Strong and significant intraobserver(lacrimal surgeon) repeatability was found for both the type(Kappa=0.66) and location(Kappa=0.69) of obstruction. LS showed no to slight reliability based on irrigation test.CONCLUSION: A moderate agreement is found between lacrimal surgeon and nuclear medicine specialist regarding the interpretation of LS suggesting the importance ofconsensus groups among nuclear medicine specialists and lacrimal surgeons to create a common language for interpretation of LS. Intra-observer repeatability is strong for the lacrimal surgeon.

Effect of Nucleating Agent on the Crystallization of Tailings Glass Ceramics Prepared by One-time Sintering

Glass ceramics was made by the one-time sintering method using the main raw material of iron tailings. On the basis of quaternary system of CaO-MgO-Al2O3-SiO2, using DTA, XRD and SEM, the effects of different nucleating agents and mixing amounts as well as heat treatment on the crystallization of railings glass ceramics were studied. The experimental results show that, nucleating agent and heat treatment are two necessary conditions for one-time sintering preparation of tailings glass ceramics namely, only adding nucleating agent or experiencing heat treatment, the quaternary system can not crystallize. The composite nucleating agent consisting of Cr2O3 and TiO2 can further lead to the crystallization of the CaO-MgO-A1203-SiO2 quaternary system at the lower temperature, with the major phase of diopside. In the range of mass content, 0%-4%, crystal intensity and crystal content grow. But when mass content is more than 4%, the crystal size will become coarser and the crystal distribution will be less regular. Different heat treatment regimes do not change the composition of the crystalline major phase in the glass ceramics crystallization of CaO-MgO-Al2O3-SiO2 system. In the range of 30-60 minutes, with the extension of nucleation and crystallization, crystallization degree enhanced, but if the holding time surpasses 60 minutes, the crystallization is worse.

A One-Time Pad Encryption Scheme Based on Efficient Physical-Layer Secret Key Generation for Intelligent IoT System

The one-time pad(OTP)is an applicationlayer encryption technique to achieve the informationtheoretic security,and the physical-layer secret key generation(SKG)technique is a promising candidate to provide the random keys for OTP.In this paper,we propose a joint SKG and OTP encryption scheme with the aid of a reconfigurable intelligent surface(RIS)to boost secret key rate.To maximize the efficiency of secure communication,we divide the process of secure transmission into two stages:SKG and then encrypted packet transmission.Meanwhile,we design an optimal algorithm for allocating time slots for SKG to maximize SKG efficiency without security risk.Furthermore,we design a key updating protocol based on our SKG scheme for OTP encryption.Simulation results verify that our scheme can generate keys securely and efficiently,and significantly improve the secure communication performance in an intelligent IoT system.

Probabilistic back-analysis of rainfall-induced landslides for slope reliability prediction with multi-source information

Probabilistic back-analysis is an important means to infer the statistics of uncertain soil parameters,making the slope reliability assessment closer to the engineering reality.However,multi-source information(including test data,monitored data,field observation and slope survival records)is rarely used in current probabilistic back-analysis.Conducting the probabilistic back-analysis of spatially varying soil parameters and slope reliability prediction under rainfalls by integrating multi-source information is a challenging task since thousands of random variables and high-dimensional likelihood function are usually involved.In this paper,a framework by integrating a modified Bayesian Updating with Subset simulation(mBUS)method with adaptive Conditional Sampling(aCS)algorithm is established for the probabilistic back-analysis of spatially varying soil parameters and slope reliability prediction.Within this framework,the high-dimensional probabilistic back-analysis problem can be easily tackled,and the multi-source information(e.g.monitored pressure heads and slope survival records)can be fully used in the back-analysis.A real Taoyuan landslide case in Taiwan,China is investigated to illustrate the effectiveness and performance of the established framework.The findings show that the posterior knowledge of soil parameters obtained from the established framework is in good agreement with the field observations.Furthermore,the updated knowledge of soil parameters can be utilized to reliably predict the occurrence probability of a landslide caused by the heavy rainfall event on September 12,2004 or forecast the potential landslides under future rainfalls in the Fuhsing District of Taoyuan City,Taiwan,China.

System Reliability Analysis Method Based on T-S FTA and HE-BN

For high-reliability systems in military,aerospace,and railway fields,the challenges of reliability analysis lie in dealing with unclear failure mechanisms,complex fault relationships,lack of fault data,and uncertainty of fault states.To overcome these problems,this paper proposes a reliability analysismethod based on T-S fault tree analysis(T-S FTA)and Hyper-ellipsoidal Bayesian network(HE-BN).The method describes the connection between the various systemfault events by T-S fuzzy gates and translates them into a Bayesian network(BN)model.Combining the advantages of T-S fault tree modeling with the advantages of Bayesian network computation,a reliability modeling method is proposed that can fully reflect the fault characteristics of complex systems.Experts describe the degree of failure of the event in the form of interval numbers.The knowledge and experience of experts are fused with the D-S evidence theory to obtain the initial failure probability interval of the BN root node.Then,the Hyper-ellipsoidal model(HM)constrains the initial failure probability interval and constructs a HE-BN for the system.A reliability analysismethod is proposed to solve the problem of insufficient failure data and uncertainty in the degree of failure.The failure probability of the system is further calculated and the key components that affect the system’s reliability are identified.The proposedmethod accounts for the uncertainty and incompleteness of the failure data in complex multi-state systems and establishes an easily computable reliability model that fully reflects the characteristics of complex faults and accurately identifies system weaknesses.The feasibility and accuracy of the method are further verified by conducting case studies.

Belief reliability:a scientific exploration of reliability engineering

This paper systematically introduces and reviews a scientific exploration of reliability called the belief reliability.Beginning with the origin of reliability engineering,the problems of present theories for reliability engineering are summarized as a query,a dilemma,and a puzzle.Then,through philosophical reflection,we introduce the theoretical solutions given by belief reliability theory,including scientific principles,basic equations,reliability science experiments,and mathematical measures.The basic methods and technologies of belief reliability,namely,belief reliability analysis,function-oriented belief reliability design,belief reliability evaluation,and several newly developed methods and technologies are sequentially elaborated and overviewed.Based on the above investigations,we summarize the significance of belief reliability theory and make some prospects about future research,aiming to promote the development of reliability science and engineering.

On the relationship between imprint and reliability in Hf_(0.5)Zr_(0.5)O_(2) based ferroelectric random access memory

The detrimental effect of imprint,which can cause misreading problem,has hindered the application of ferroelectric HfO_(2).In this work,we present results of a comprehensive reliability evaluation of Hf_(0.5)Zr_(0.5)O_(2)-based ferroelectric random access memory.The influence of imprint on the retention and endurance is demonstrated.Furthermore,a solution in circuity is pro-posed to effectively solve the misreading problem caused by imprint.

Introduction to the Special Issue on Computer-Aided Uncertainty Modeling and Reliability Evaluation for Complex Engineering Structures

1 Summary With the advancement of science and technology,complex engineering structures are widely used in extreme environments[1].In equipment service,many uncertainty factors significantly affect safety and reliability[2–5].Therefore,ensuring high reliability of structures has become an important research direction in engineering design.At the same time,the importance of equipment health management of complex engineering structures is becoming increasingly prominent[6–8].Computer-aided uncertainty modeling and reliability assessment have become key tools,and finite element simulation and algorithmic innovation play a key role in the reliability analysis of complex equipment[9,10].These techniques can accurately simulate stress and damage accumulation under various operating environments,providing engineers with important decision support and optimization solutions.

Interrater Reliability Estimation via Maximum Likelihood for Gwet’s Chance Agreement Model

Interrater reliability (IRR) statistics, like Cohen’s kappa, measure agreement between raters beyond what is expected by chance when classifying items into categories. While Cohen’s kappa has been widely used, it has several limitations, prompting development of Gwet’s agreement statistic, an alternative “kappa”statistic which models chance agreement via an “occasional guessing” model. However, we show that Gwet’s formula for estimating the proportion of agreement due to chance is itself biased for intermediate levels of agreement, despite overcoming limitations of Cohen’s kappa at high and low agreement levels. We derive a maximum likelihood estimator for the occasional guessing model that yields an unbiased estimator of the IRR, which we call the maximum likelihood kappa (κML). The key result is that the chance agreement probability under the occasional guessing model is simply equal to the observed rate of disagreement between raters. The κMLstatistic provides a theoretically principled approach to quantifying IRR that addresses limitations of previous κcoefficients. Given the widespread use of IRR measures, having an unbiased estimator is important for reliable inference across domains where rater judgments are analyzed.

Ultra Reliable Load-Aware Connection Management(LACM)Algorithm in WIA-FA Systems

The increasing demand for industrial automation and intelligence has put forward higher requirements for the reliability of industrial wireless communication technology.As an international standard based on 802.11,Wireless networks for Industrial Automation-Factory Automation(WIA-FA)greatly improves the reliability in factory automation scenarios by Time Division Multiple Access(TDMA).However,in ultra-dense WIA-FA networks with mobile users,the basic connection management mechanism is inefficient.Most of the handover and resource management algorithms are all based on frequency division multiplexing,not suitable for the TDMA in the WIA-FA network.Therefore,we propose Load-aware Connection Management(LACM)algorithm to adjust the linkage and balance the load of access devices to avoid blocking and improve the reliability of the system.And then we simulate the algorithm to find the optimal settings of the parameters.After comparing with other existing algorithms,the result of the simulation proves that LACM is more efficient in reliability and maintains high reliability of more than 99.8%even in the ultra-dense moving scenario with 1500 field devices.Besides,this algorithm ensures that only a few signaling exchanges are required to ensure load bal-ancing,which is no more than 5 times,and less than half of the best state-of-the-art algorithm.

Reliability Assessment of a New General Matching Composed Network

The reliability of a network is an important indicator for maintaining communication and ensuring its stable operation. Therefore, the assessment of reliability in underlying interconnection networks has become an increasingly important research issue. However, at present, the reliability assessment of many interconnected networks is not yet accurate,which inevitably weakens their fault tolerance and diagnostic capabilities. To improve network reliability,researchers have proposed various methods and strategies for precise assessment. This paper introduces a novel family of interconnection networks called general matching composed networks(gMCNs), which is based on the common characteristics of network topology structure. After analyzing the topological properties of gMCNs, we establish a relationship between super connectivity and conditional diagnosability of gMCNs. Furthermore, we assess the reliability of g MCNs, and determine the conditional diagnosability of many interconnection networks.

Saddlepoint Approximation Method in Reliability Analysis:A Review

The escalating need for reliability analysis(RA)and reliability-based design optimization(RBDO)within engineering challenges has prompted the advancement of saddlepoint approximationmethods(SAM)tailored for such problems.This article offers a detailed overview of the general SAM and summarizes the method characteristics first.Subsequently,recent enhancements in the SAM theoretical framework are assessed.Notably,the mean value first-order saddlepoint approximation(MVFOSA)bears resemblance to the conceptual framework of the mean value second-order saddlepoint approximation(MVSOSA);the latter serves as an auxiliary approach to the former.Their distinction is rooted in the varying expansion orders of the performance function as implemented through the Taylor method.Both the saddlepoint approximation and third-moment(SATM)and saddlepoint approximation and fourth-moment(SAFM)strategies model the cumulant generating function(CGF)by leveraging the initial random moments of the function.Although their optimal application domains diverge,each method consistently ensures superior relative precision,enhanced efficiency,and sustained stability.Every method elucidated is exemplified through pertinent RA or RBDO scenarios.By juxtaposing them against alternative strategies,the efficacy of these methods becomes evident.The outcomes proffered are subsequently employed as a foundation for contemplating prospective theoretical and practical research endeavors concerning SAMs.The main purpose and value of this article is to review the SAM and reliability-related issues,which can provide some reference and inspiration for future research scholars in this field.