ON THE RATE OF POINTWISE CONVERGENCE OF THE DURRMEYER-TYPE OPERATORS

For bounded or some locally bounded functions f measurable on an interval I there is estimated the rate of convergence of the Durrmeyer-type operators Lnf at those points x∈IntI at which the one-sided limits f(x± 0) exist. In the main theorems the Chanturiya's modulus of variation is used.

Process optimization of billet continuous caster and practice verification

This study analyzes the factors of influence on 0~# continuous caster in No.1 Steelmaking Plant of Xinjiang Bayi Iron & Steel Corporation(hereinafter referred to as Basteel).Diameter of tundish upper nozzle is small,and the molten steel leakage accidents have been greatly manifolded in the high casting speed.In order to increase yield of 0~# continuouse caster in No.1 Steelmaking Plant of Xinjiang Bayi Iron & Steel Corporation,and a series of amelioration measure was put forward.Through enlarging diameter of tundish upper nozzle(fromφ21 mm toφ21.5 mm ),after the water distribution of the secondary cooling was optimized.Based on stabilizing the quality,improving the average casting speed and work rate of the caster,the capacity of the billet continuous caster was improved.A better results was gained;the average casting speed had been increased from 3.04 m/min to 3.21 m/min.Production of the caster had been improved from 1 005 179.926 t in 2008 to 1 040 853.075 t in 2009.Quality of the concasting billets and production had also been stabilized.

Development of process energy intensity formula under different state variables

In a production process, the actual energy consumption is greatly affected by the production state. Certain processing operations are classified into six states, including normal production, abnormal production, planned overhaul, unplanned overhaul, transitional period from unplanned overhaul to normal production (referred for short as unplanned transition) and transitional period from planned overhaul to normal production (referred for short as planned transition). The article takes the analysis of relationship between different states of a certain processing operation and corresponding energy consumptions as a startup point to develop a process energy intensity formula with variables of operating rate, yielding rate and operating frequency, etc. This process energy intensity formula can be used to analyze effectively the pattern of impact exerted by different state variables on energy consumption.

Evaluation of rope shovel operators in surface coal mining using a Multi-Attribute Decision-Making model

Rope shovels are used to dig and load materials in surface mines. One of the main factors that influence the production rate and energy consumption of rope shovels is the performance of the operator. This paper presents a method for evaluating rope shovel operators using the Multi-Attribute Decision-Making （MADM） model. Data used in this research were collected from an operating surface coal mine in the southern United States. The MADM model consists of attributes, their weights of importance, and alter- natives. Shovel operators are considered the alternatives, The energy consumption model was developed with multiple regression analysis, and its variables were included in the MADM model as attributes. Preferences with respect to min/max of the defined attributes were obtained with multi-objective opti- mization. Multi-objective optimization was conducted with the overall goal of minimizing energy con- sumption and maximizing production rate. Weights of importance of the attributes were determined by the Analytical Hierarchy Process （AHP）, The overall evaluation of operators was performed by one of the MADM models, i.e., PROMETHEE If. The research results presented here may be used by mining professionals to held evaluate the performance of rode shovel operators in surface mining.

Dephosphorization stability of hot metal by double slag operation in basic oxygen furnace

Double slag process was adopted to produce low-phosphorus steel from middle-phosphorus hot metal.To achieve a stable dephosphorization operation,conventional process was modified as follows：the blowing time was extended by approximately 1min by reducing the oxygen supply flow rate;calcium ferrite pellets were added to adjust the slag composition and viscosity;the dumping temperature was lowered by 30-50°C by the addition of calcium ferrite pellets during the double slag process to prevent phosphorus in the slag from returning to the molten steel;and the bottom-blown gas flow was increased during the blowing process.For 40 heats of comparative experiments,the rate of dephosphorization reached 91% and ranged between 87% and 95%;the phosphorus,sulfur,manganese,and oxygen contents calculated according to the compositions of molten steel and slag as well as the temperature of molten steel at the end-point of the basic oxygen furnace process were similar to the equilibrium values for the reaction between the slag and the steel.Less free calcium oxide and metallic iron were present in the final slag,and the surface of the slag mineral phase was smooth,clear,and well developed,which showed that the slag exhibited better melting effects than that produced using the conventional slag process.A steady phosphorus capacity in the slag and stable dephosphorization effects were achieved.

Applications of an IS-MP Model with Yield Curve

This paper interest rates （i.e., the recent macroeconomic presents an IS-MP model with the term structure of yield curve） and discusses some of its applications to activities and policy issues. Specifically, the model is employed to explain （1） why a steepening yield curve may signal the subsequent economic expansion, （2） why long-term zero interest rate policy （ZIRP） may not completely avoid recessions, but disables the yield curve from being inverted to signal the following economic recession, （3） how Operation Twist （OT） may help ease the recession, in particular, under ZIRP, and what limit it may face.