Toward Low-Cost Flexible Intelligent OAM in Optical Fiber Communication Networks

Low-cost,flexible and intelligent optical performance monitoring and management is a key enabling technology for network quality guarantee,especially in the era of explosive growth of communication capacity and network scale.However,to the best of our knowledge,it is extremely challenging to implement real-time performance monitoring and operations,administration and maintenance(OAM) in a highly complex dynamic network.In this paper,we propose an innovative optical identification(OID) scheme that can realize both performance monitoring and some advanced OAM sub-functions.The basic concepts,applications,challenges and evolution directions of this OID tool are also discussed.

Optimization of Spectral Inverters in Optical Fiber Communication Systems with Mid-Span Spectrum Inversion

In this paper, signal distortions caused by spectral inverters which are used in 10Gb/s optical fiber communication systems with mid span spectrum inversion in terms of dispersion shift fibers are analyed numerically. It is shown that there exist the optimal input signal power, fiber length and fiblter bandwidth for the spectral in verters. System transmission penalty can be minimized by optimizing these parameters.

2.5 Gbit/s monolithic ICs for optical fiber transmitter and receiver in 0.35 μm CMOS process

2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includes a 4： 1 multiplexer and a laser diode driver （LDD）, has four 622 Mbit/s random signals as its inputs and gets a 2.5 Gbit/s driving signal as its output; the receiver detects a 2.5 Gbit/s random signal and gets four 622 Mbit/s signals at the output. The main circuits include a trans-impedance amplifier （TIA）, a limiting amplifier, a clock and data recovery （CDR） unit, and a 1： 4 demultiplexer （DEMUX）. Test results prove the logic functions of the transmitter to be right, and the 10% to 90% rise and fall times of transmitter＇s output data eye diagram are 211.1 ps and 200 ps, respectively. The sensitivity of the receiver is measured to be better than 20 mV. The root mean square jitter of the DEMUX＇s output data is 15.6 ps and that of the clock after 1： 4 frequency dividing is 1.9 ps. Two chips are both applicable to 2.5 Gbit/s optical fiber communication systems.

STUDY ON MINE FIRE-RESISTANT OPTICAL FIBER CABLE KL5004

This paper introduces a new-developed mine fire-resistant optical fiber cable (OFC)KL5004,its structural characteristics, main feature, the theory about fire resistance and its application in high output and efficiency mine.

Combined optical fiber interferometric sensors for the detection of acoustic emission

A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be used to monitor the health of large structure. Theoretical analyses indicate that the system can be equivalent to the Michelson interferometer with two optical fiber loop reflectors,and its sensitivity has been remarkably increased because of the decrease of the losses of light energy. PZT is powered by DC regulator to control the operating point of the system,so the system can accurately detect feeble vibration which is generated by ultrasonic waves propagating on the surface of solid. The amplitude and the frequency of feeble vibration signal are obtained by detecting the output light intensity of interferometer and using Fourier transform technique. The results indicate that the system can be used to detect the acoustic emission signals by the frequency characteristics.

Research on Additional Loss of Guidance Optical Fiber

The factors which cause additional losses of guidance optical fiber in wound state were analyzed.A mathematical model used to analyze the macro-bend losses in the cross region producing in the precision winding process was established.For an actual guidance optical fiber,the measured data of the fiber's additional losses under low temperature and the loss curves with radius were given in the paper.The simulation results were compared with the test data.It shows that the additional losses of optical fiber caused by bending and low temperature can meet the actual requirements of the fiber optical guidance system.The established model can be used to predict the change trend of fiber losses in the winding process with a certain tensile force.

Remote I/O Unit for Optical Fiber Demmunication

Abstract:Based on optical fiber technology, the main electric circuit of the remote I/O unit controller is studied. And the application of the system is illustrated.

Design and Implementation of Optical Fiber Test Equipment

In order to meet the needs of the rapid development of optical fiber communication technology, combined with the thinking of the Internet of Things, a new idea of designing an optical fiber test equipment using Raspberry Pi is proposed. At the same time, the design of a multi-parameter measuring device for optical fiber signals based on Flask was completed.

Loading Localization by Small-Diameter Optical Fiber Sensors

Structural health monitoring(SHM)in service has attracted increasing attention for years.Load localization on a structure is studied hereby.Two algorithms,i.e.,support vector machine(SVM)method and back propagation neural network(BPNN)algorithm,are proposed to identify the loading positions individually.The feasibility of the suggested methods is evaluated through an experimental program on a carbon fiber reinforced plastic laminate.The experimental tests involve in application of four optical fiber-based sensors for strain measurement at discrete points.The sensors are specially designed fiber Bragg grating(FBG)in small diameter.The small-diameter FBG sensors are arrayed in 2-D on the laminate surface.The testing results indicate that the loading position could be detected by the proposed method.Using SVM method,the 2-D FBG sensors can approximate the loading location with maximum error less than 14 mm.However,the maximum localization error could be limited to about 1 mm by applying the BPNN algorithm.It is mainly because the convergence conditions(mean square error)can be set in advance,while SVM cannot.

FAST EVALUATION OF THE CHARACTERISTICS OF SINGLE-MODE OPTICAL FIBERS

This paper describes a method for fast engineering evaluation of the transmission characteristicsof single-mode optical fibers.A versatile microcomputer program is presented which can be utilized to ana-lyze mode field characteristics of single-mode fibers with arbitrary refractive index profiles.Our computationshows that the mathematical algorithm and the corresponding programs developeod in this paper are rela-tively simple and accurate enough for the engineenring design of single-mode fibers for optical communica-tion systems.

Design of A CWDM OADM for Fiber Optical Communication Network

A CWDM is proposed for fiber optic communication networks. The OADM is designed based on SOI structure. The scheme for CWDM optical signal protection is presented.

Review of In‑Vehicle Optical Fiber Communication Technology

With the continuous development of automotive intelligent networking and autonomous driving technologies,the number of in-vehicle electronic systems and applications is increasing rapidly.This change increases the amount of data to be transmitted in the vehicle and puts forward further requirements of higher speed and safety for in-vehicle communication.Traditional vehicle bus technologies are no longer sufficient to meet today’s high-speed transmission requirements,in which copper cables are used extensively,resulting in serious electromagnetic interference(EMI).Vehicle optical fiber communication technology,besides greatly improving the data transmission rate,has the advantages of anti-EMI,reducing cable space and vehicle mass.This paper first presents the motivation of applying vehicle optical fiber communication technology and reviews the development history of vehicle optical fiber communication technology.Then,the paper researches the devel-opment trend of automotive electrical and electronic architecture(EEA),from distributed EEA to domain centralized EEA and zone-oriented EEA.Based on the discussion of the development trend of automotive EEA,an EEA based on vehicle optical fiber communication technology is proposed.Finally,the key points and future directions of vehicle optical fiber communication technology research are highlighted,including vehicle multi-mode optical fiber technology,vehicle optical fiber network protocol,and topology.

Review of Optical Fiber Sensor Network Technology Based on White Light Interferometry

Optical fiber sensor networks(OFSNs)provide powerful tools for large-scale buildings or long-distance sensing,and they can realize distributed or quasi-distributed measurement of temperature,strain,and other physical quantities.This article provides some optical fiber sensor network technologies based on the white light interference technology.We discuss the key issues in the fiber white light interference network,including the topology structure of white light interferometric fiber sensor network,the node connection components,and evaluation of the maximum number of sensors in the network.A final comment about further development prospects of fiber sensor network is presented.

Chaotic laser synchronization and its application in optical fiber secure communication

In this paper, optical fiber chaotic secure communication is proposed bycoupling chaotic laser synchronous system with optical fiber propagation channel.Feedback synchronous system of chaotic semiconductor lasers is presented andsynchronous error and decoding formulae are demonstrated. Synchronization betweentwo chaotic laser systems with distributed feedback semiconductor lasers at wavelengthof 1.31 μm is simulatively achieved with almost zero synchronous error. Parametermismatch, synchronous transient response and noise effect on the system are studied.Robustness of synchronization and anti-perturbation can increase by increasing thefeedback coefficient of the system. Influence of group-velocity-dispersion and self-phasemodulation of optical fiber on chaotic laser signal and synchronization are analyzed, and itis found that group-velocity-dispersion affects pulse shape, synchronization and decoding,and limits optical fiber propagation distances, and self-phase modulation does not affectpulse shape, while its product of nonlinear phase shift can affect synchronization anddecoding, and restrict propagation distances of optical fiber chaotic communicationsystem and hence the maximum optical power formula is educed. Injecting parametermodulation and amplitude modulation are numerically simulated in long-haul optical fibersecure communication systems.

Influence of the nonlinear propagation effect on the optical signal-to-noise ratio of 400G optical fiber communication systems

The influence of the nonlinear propagation effect on three 400 Gb/s/ch （400G） optical fiber communication systems with typical modulation formats, dual-carrier 16-quadrature amplitude modulation （16QAM）, single-carrier 16QAM （single-16QAM）, and four-carrier quadrature phase-shift keying, are investigated. The received optical signal-to-noise ratio （OSNR）, affected by the nonlinear interference noise together with the amplified spontaneous emission noise, are compared with three 400G systems and a standard 100 Gb/s/ch system by numerical simulations. Both single channel and multichannel cases are considered. Single-16QAM is found to have the best OSNR among those modulation formats.

Pilot-added carrier-phase recovery scheme for Nyquist M-ary quadrature amplitude modulation optical fiber communication system

A new two-stage carrier-phase recovery scheme using a combination of an optical pilot-aided algorithm with the crossed constellation transformation algorithm for either square-framed or non-square-framed M-level- quadrature amplitude modulation （QAM） Nyquist systems is proposed. It is verified in 32- and 128-QAM systems that it can provide high linewidth tolerance with little complexity.

High order modulation format identification based on compressed sensing in optical fiber communication system

We propose a method of modulation format identification based on compressed sensing using a high-order cyclic cumulant combined with a binary tree classifier.Through computing the fourth-order cyclic cumulant of the pretreated band signal,which is obtained by compressed sensing with the sampling rate much less than the Nyquist sampling value,the feature vector for classification is extracted.Simulations are carried out in the optical coherent fiber communication system with different modulation formats of multiple phase-shift keying and multiple quadrature amplitude modulation.The results indicate that this method can identify these modulation formats correctly and efficiently.Meanwhile,the proposed method is insensitive to laser phase noise and signal noise.

50 GHz optical true time delay beamforming in hybrid optical/mm-wave access networks with multi-core optical fiber distribution

We propose and experimentally validate an optical true time delay beamforming scheme with straightforward integration into hybrid optical/millimeter（mm）-wave access networks. In the proposed approach, the most complex functions, including the beamforming network, are implemented in a central office, reducing the complexity and cost of remote antenna units. Different cores in a multi-core fiber are used to distribute the modulated signals to high-speed photodetectors acting as heterodyne mixers. The mm-wave carrier frequency is fixed to 50 GHz（VBand）, thereby imposing a progressive delay between antenna elements of a few picoseconds. That true time delay is achieved with an accuracy lower than 1 ps and low phase noise.

Optical Fiber Devices in WDM Networks

Crystal optics and fiber grating technology are two of the most important optical fiber device technologies. In this paper, we report several new devices developed in Accelink for WDM networks application.