Design and simulation of a silicon-based hybrid integrated optical gyroscope system

By combining a silicon-based lithium niobate modulator and a silicon-based Si3N4resonator with silicon-based photonics technology,a highly systematic design of a hybrid integrated optical gyroscope with enhanced reciprocity sensitivity and a dual micro-ring structure is proposed for the first time in this paper.The relationship between the device's structural parameters and optical performance is also analyzed by constructing a complete simulation link,which provides a theoretical design reference to improve the system's sensitivity.When the wavelength is 1550 nm,the conversion frequency of the dual-ring optical path is 50 MHz,the coupling coefficient is 0.2,and the radius R is 1000μm,the quality factor of the silicon-based Si_(3)N_(4)resonator is 2.58×10^(5),which is 1.58 times that of the silicon-on-insulator resonator.Moreover,the effective number of times the light travels around the ring before leaving the micro-ring is 5.93,which is 1.62 times that of the silicon-on-insulator resonator.The work fits the gyro dynamic output diagram,and solves the problem of low sensitivity at low speed by setting the phase offset.This results provide a basis for the further optimization of design and chip processing of the integrated optical gyroscope.

Research progress of integrated optical gyroscope

Integrated optical gyroscopes(IOGs)have been an efficient tool for numerous applications in various fields,including inertial navigation,flight control,and earthquake monitoring.Here,we review the progress of integrated optical gyroscopes based on two categories of integrated interferometric optical gyroscopes(IIOGs)and integrated resonant optical gyroscopes(IROGs).

Review of micromachined optical accelerometers:from mg to sub-μg

Micro-Opto-Electro-Mechanical Systems(MOEMS)accelerometer is a new type of accelerometer which combines the merits of optical measurement and Micro-Electro-Mechanical Systems(MEMS)to enable high precision,small volume and anti-electromagnetic disturbance measurement of acceleration.In recent years,with the in-depth research and development of MOEMS accelerometers,the community is flourishing with the possible applications in seismic monitoring,inertial navigation,aerospace and other industrial and military fields.There have been a variety of schemes of MOEMS accelerometers,whereas the performances differ greatly due to different measurement principles and corresponding application requirements.This paper aims to address the pressing issue of the current lack of systematic review of MOEMS accelerometers.According to the optical measurement principle,we divide the MOEMS accelerometers into three categories:the geometric optics based,the wave optics based,and the new optomechanical accelerometers.Regarding the most widely studied category,the wave optics based accelerometers are further divided into four sub-categories,which is based on grating interferometric cavity,Fiber Bragg Grating(FBG),Fabry-Perot cavity,and photonic crystal,respectively.Following a brief introduction to the measurement principles,the typical performances,advantages and disadvantages as well as the potential application scenarios of all kinds of MOEMS accelerometers are discussed on the basis of typical demonstrations.This paper also presents the status and development tendency of MOEMS accelerometers to meet the ever-increasing demand for high-precision acceleration measurement.

Chip-Based High-Dimensional Optical Neural Network

Parallel multi-thread processing in advanced intelligent processors is the core to realize high-speed and high-capacity signal processing systems.Optical neural network(ONN)has the native advantages of high parallelization,large bandwidth,and low power consumption to meet the demand of big data.Here,we demonstrate the dual-layer ONN with Mach-Zehnder interferometer(MZI)network and nonlinear layer,while the nonlinear activation function is achieved by optical-electronic signal conversion.Two frequency components from the microcomb source carrying digit datasets are simultaneously imposed and intelligently recognized through the ONN.We successfully achieve the digit classification of different frequency components by demultiplexing the output signal and testing power distribution.Efficient parallelization feasibility with wavelength division multiplexing is demonstrated in our high-dimensional ONN.This work provides a high-performance architecture for future parallel high-capacity optical analog computing.

Structured Illumination Chip Based on Integrated Optics

A compact structured illumination chip based on integrated optics is proposed and fabricated on a silicon-on- insulator platform. Based on the simulation of Caussian beam interference, we adopt a chirped diffraction grating to achieve a specific interference pattern. The experimental results match well with the simulations. The portability and flexibility of the structured illumination chip can be increased greatly through horizontal encapsulation. High levels of integration, compared with the conventional structured illumination approach, make this chip very compact, with a footprint of only around 1 mm2. The chip has no optical lenses and can be easily combined with a microfluidic system. These properties would make the chip very suitable for portable 3D scanner and compact super-resolution microscopy applications.

High-speed and broad optical bandwidth silicon modulator

A high-speed silicon modulator with broad optical bandwidth is proposed based on a symmetrically configured Mach- Zehnder interferometer. Careful phase bias control and traveling-wave design are used to improve the high-speed perfor- mance. Over a broadband wavelength range, high-speed operation up to 30 Gbit/s with a 4.5 dB-5.5 dB extinction ratio is experimentally demonstrated with a low driving voltage of 3 V.

The 8×10 GHz Receiver Optical Subassembly Based on Silica Hybrid Integration Technology for Data Center Interconnection

An 8×10 GHz receiver optical sub-assembly （ROSA） consisting of an 8-channel arrayed waveguide grating （AWG） and an 8-channel PIN photodetector （PD） array is designed and fabricated based on silica hybrid integration technology. Multimode output waveguides in the silica AWG with 2% refractive index difference are used to obtain fiat-top spectra. The output waveguide facet is polished to 45° bevel to change the light propagation direction into the mesa-type PIN PD, which simplifies the packaging process. The experimentM results show that the single channel I dB bandwidth of AWG ranges from 2.12nm to 3.06nm, the ROSA responsivity ranges from 0.097 A/W to 0.158A/W, and the 3dB bandwidth is up to 11 GHz. It is promising to be applied in the eight-lane WDM transmission system in data center interconnection.

Photonic radio frequency channelizers based on Kerr optical micro-combs

We review recent work on broadband RF channelizers based on integrated optical frequency Kerr micro-combs combined with passive micro-ring resonator filters,with microcombs having channel spacings of 200 and 49 GHz.This approach to realizing RF channelizers offers reduced complexity,size,and potential cost for a wide range of applications to microwave signal detection.

Tunable optical filter using second-order micro-ring resonator

In this paper, we design and fabricate a silicon integrated optical filter consisting of two cascaded micro-ring resonators and two straight waveguides. Two micro-heaters are fabricated on the top of two micro-rings respectively, which are employed to modulate the micro-rings to perform the function of a tunable optical filter by the thermo–optic effect. The static response test indicates that the extinction ratio and 3-d B bandwidth are 29.01 d B and 0.21 nm respectively, the dynamic response test indicates that the 10%–90% rise and 90%–10% fall time of the filter are 16 μs and 12 μs, respectively,which can meet the requirements of optical communication and information processing. Finally, the power consumption of the device is also characterized, and the total power consumption is about 9.43 m W/nm, which has been improved efficiently.

Parallel-Computing Wavelet-Based FDTD Method for Modeling Nanoscale Optical Resonator

An efficient wavelet-based finite-difference time-domain(FDTD)method is implemented for analyzing nanoscale optical devices,especially optical resonator.Because of its highly linear numerical dispersion properties the high-spatial-order FDTD achieves significant reduction in the number of cells,i.e.used memory,while analyzing a high-index dielectric ring resonator working as an add/drop multiplexer.The main novelty is that the wavelet-based FDTD model is extended in a parallel computation environment to solve physical problems with large dimensions.To demonstrate the efficiency of the parallelized FDTD model,a mirrored cavity is analyzed.The analysis shows that the proposed model reduces computation time and memory cost,and the parallel computation result matches the theoretical model.

Full-vectorial analysis of optical waveguides by the finite difference method based on polynomial interpolation

Based on the polynomial interpolation, a new finite difference （FD） method in solving the full-vectorial guidedmodes for step-index optical waveguides is proposed. The discontinuities of the normal components of the electric field across abrupt dielectric interfaces are considered in the absence of the limitations of scalar and semivectorial approximation, and the present PD scheme can be applied to both uniform and non-uniform mesh grids. The modal propagation constants and field distributions for buried rectangular waveguides and optical rib waveguides are presented. The hybrid nature of the vectorial modes is demonstrated and the singular behaviours of the minor field components in the corners are observed. Moreover, solutions are in good agreement with those published early, which tests the validity of the present approach.

Electrically and Optically Bistable Operation in an Integration of a 1310 nm DFB Laser and a Tunneling Diode

We experimentally demonstrate an In P-based hybrid integration of a single-mode DFB laser emitting at around 1310 nm and a tunneling diode. The evident negative differential resistance regions are obtained in both electrical and optical output characteristics. The electrical and optical bistabilities controlled by the voltage through the tunneling diode are also measured. When the voltage changes between 1.46 V and 1.66 V, a 200-mV-wide hysteresis loop and an optical power ON/OFF ratio of 17 dB are obtained. A side-mode suppression ratio of the integrated device in the ON state is up to 43 dB. The tunneling diode can switch on/off the laser within a very small voltage range compared with that directly controlled by a voltage source.

High Optical Magnification Three-Dimensional Integral Imaging of Biological Micro-organism

A high optical magnification three-dimensional imaging system is proposed using an optic microscope whose ocular （eyepiece） is retained and the structure of the transmission mode is not destroyed. The elemental image array is captured through the micro lens array. Due to the front diffuse transmission element, each micro lens sees a slightly different spatial perspective of the scene, and a different independent image is formed in each micro lens channel. Each micro lens channel is imaged by a Fourier lens and captured by a CCD. The design translating the stage in x or y provides no parallax. Compared with the conventional integral imaging of micro-objects, the optical magnification of micro-objects in the proposed system can enhanced remarkably. The principle of the enhancement of the image depth is explained in detail and the experimental results are presented.

Time evolution of negative binomial optical field in a diffusion channel

We find the time evolution law of a negative binomial optical field in a diffusion channel. We reveal that by adjusting the diffusion parameter, the photon number can be controlled. Therefore, the diffusion process can be considered a quantum controlling scheme through photon addition.

Energy‑efcient integrated silicon optical phased array

An optical phased array(OPA)is a promising non-mechanical technique for beam steering in solid-state light detection and ranging systems.The performance of the OPA largely depends on the phase shifter,which afects power consumption,insertion loss,modulation speed,and footprint.However,for a thermo-optic phase shifter,achieving good performance in all aspects is challenging due to trade-ofs among these aspects.In this work,we propose and demonstrate two types of energy-efcient optical phase shifters that overcome these trade-ofs and achieve a well-balanced performance in all aspects.Additionally,the proposed round-spiral phase shifter is robust in fabrication and fully compatible with deep ultraviolet(DUV)processes,making it an ideal building block for large-scale photonic integrated circuits(PICs).Using the high-performance phase shifter,we propose a periodic OPA with low power consumption,whose maximum electric power consumption within the feld of view is only 0.33 W.Moreover,we designed Gaussian power distribution in both the azimuthal(ψ)and polar(θ)directions and experimentally achieved a large sidelobe suppression ratio of 15.1 and 25 dB,respectively.

Integrated diffractive optical neural network with space-time interleaving

Integrated diffractive optical neural networks(DONNs)have significant potential for complex machine learning tasks with high speed and ultralow energy consumption.However,the on-chip implementation of a high-performance optical neural network is limited by input dimensions.In contrast to existing photonic neural networks,a space-time interleaving technology based on arrayed waveguides is designed to realize an on-chip DONN with high-speed,high-dimensional,and all-optical input signal modulation.To demonstrate the performance of the on-chip DONN with high-speed space-time interleaving modulation,an on-chip DONN with a designed footprint of 0.0945 mm~2is proposed to resolve the vowel recognition task,reaching a computation speed of about 1.4×10^(13)operations per second and yielding an accuracy of 98.3%in numerical calculation.In addition,the function of the specially designed arrayed waveguides for realizing parallel signal inputs using space-time conversion has been verified experimentally.This method can realize the on-chip DONN with higher input dimension and lower energy consumption.

Compact TE-pass polarizer based on lithium-niobate-on-insulator assisted by indium tin oxide and silicon nitride

An indium tin oxide(ITO) and silicon nitride(Si_(3)N_(4)) assisted compact TE-pass waveguide polarizer based on lithiumniobate-on-insulator is proposed and numerically analyzed.By properly designing the ITO and Si_(3)N_(4) assisted structure and utilizing the epsilon-near-zero effect of ITO,the TM mode is strongly confined in the ITO layer with extremely high loss,while the TE mode is hardly affected and passes through the waveguide with low loss.The simulation results show that the polarizer has an extinction ratio of 22.5 dB and an insertion loss of 0.8 dB at the wavelength of 1.55 μm,and has an operating bandwidth of about 125 nm(from 1540 nm to 1665 nm) for an extinction ratio of>20 dB and an insertion loss of<0.95 dB.Moreover,the proposed device exhibits large fabrication tolerances.More notably,the device is compact,with a length of only 7.5 μm,and is appropriate for on-chip applications.

Performance of integrated optical switches based on 2D materials and beyond

Applications of optical switches,such as signal routing and data-intensive computing,are critical in optical interconnects and optical computing.Integrated optical switches enabled by two-dimensional(2D)materials and beyond,such as graphene and black phosphorus,have demonstrated many advantages in terms of speed and energy consumption compared to their conventional silicon-based counterparts.Here we review the state-of-the-art of optical switches enabled by 2D materials and beyond and organize them into several tables.The performance tables and future projections show the frontiers of optical switches fabricated from 2D materials and beyond,providing researchers with an overview of this field and enabling them to identify existing challenges and predict promising research directions.

Ultra-small interferometric fiber optic gyroscope with an integrated optical chip

This study proposes a novel interferometric fiber optic gyroscope(IFOG)based on an integrated optical chip,application-specific integrated circuit,and small-diameter sensing coil.The overall size and weight of the prototype are 30 mm × 30 mm ×30 mm and 68 g,respectively,making it the smallest closed-loop IFOG,to the best of our knowledge.A static experiment shows that the bias stability of the integrated IFOG is very close to the theoretical accuracy limit determined by the fiber coil and can satisfy the requirements of near-navigation-grade compact inertial navigation systems.

4 × 20 GHz silica-based AWG hybrid integrated receiver optical sub-assemblies

Both the 4 × 20 GHz coarse wavelength division multiplexing and LAN-WDM receiver optical sub-assemblies（ROSAs） were developed. The ROSA package was hybrid integrated with a planar lightwave circuit arrayed waveguide grating（AWG） with 2% refractive index difference and a four-channel top-illuminated positive-intrinsicnegative photodetector（PD） array. The output waveguides of the AWG were designed in a multimode structure to provide flat-top optical spectra, and their end facet was angle-polished to form a total internal reflection interface to realize vertical coupling with a PD array. The maximum responsivity of ROSA was about 0.4 A/W, and its 3 dB bandwidth of frequency response was up to 20 GHz for each transmission lane. The hybrid integrated ROSA would be a cost-effective and easy-assembling solution for 100 Gb E data center interconnections.