Optimization of Extraction Conditions of Pomegranate Peel Polyphenols and Its Protective Effect on Acute Alcoholic Liver Injury in Mice

[Objectives]This study was conducted to explore the optimization of ultrasonic-assisted organic solvent extraction of pomegranate peel polyphenols(PPPs),and to study the protective effect of PPPs on acute alcoholic liver injury in mice.[Methods]The optimal extraction conditions of PPPs were determined by single factor and orthogonal experiments,and an acute alcoholic liver injury model in mice was established.Bifendate was used as the positive control group to investigate the protective effect of low,medium and high doses of PPPs on acute alcoholic liver injury.[Results]The optimum extraction process parameters were followed as 60%ethanol concentration,solid-liquid ratio of 1:40(w/v),extraction temperature of 50℃,and extraction time of 1.5 h,and the yield was 1.42%.The results of animal experiments showed that PPPs could effectively reduce the degree of alcoholic liver injury in mice,reduce the levels of serum alanine aminotransferase(ALT)and aspartate aminotransferase(AST),and reduce the inflammation and necrosis of liver tissue in mice.Meanwhile,the total polyphenols from pomegranate peel also significantly reduced the expression levels of malondialdehyde(MDA),tumor necrosis factor(TNF-α)and interleukin-6(IL-6)in mice,and increased the levels of superoxide dismutase(SOD)and reduced glutathione(GSH)in liver tissue of mice,indicating its antioxidant and anti-inflammatory effects,further illustrating its protective effect on alcoholic liver injury.[Conclusions]PPPs could reduce the expression levels of TNF-α,IL-6 and MDA in mice,and increase the expression levels of SOD and GSH to achieve the protective effect on acute alcoholic liver injury in mice.This study will provide new ideas for the development of new anti-alcoholic liver injury drug resources.

Optimization of Extraction Conditions for Total Flavonoids from Fructus Aurantii Immaturus and Its Anti-UVB Radiation Activity

[Objectives]Optimum extraction conditions of total flavonoids from Fructus Aurantii Immaturus(TFFAI)and its resistance activity to ultraviolet radiation were investigated in present research.[Methods]The optimal extraction conditions of TFFAI were determined by single factor and orthogonal experiments,and the survival rate of TFFAI on HaCaT cells irradiated with UVB rays was investigated.It s antioxidant capacity was determined by ABTS.[Results]The results showed that the highest yield of TFFAI was obtained with 70%ethanol at a solid-to-liquid ratio of 1:50(w/v)and 40℃for 1.5 h by single-factor and orthogonal experiments.Total flavonoids(0.25-1.00 mg/ml)could significantly improve the survival rate of HaCaT cell line.Meanwhile,the maximum absorption peak of TFFAI was found at 283 nm,and in-vitro antioxidant experiment identified that TFFAI had a good clearance rate to ABTS.It suggestes that TFFAI could protect the cells from UVB damage by absorption of UVB rays and anti-oxidation.[Conclusions]TFFAI played a protective role on UVB irradiated cells through UVB ultraviolet absorption and antioxidant pathways.

AN OPTIMAL CONTROL PROBLEM FOR A LOTKA-VOLTERRA COMPETITION MODEL WITH CHEMO-REPULSION

In this paper we study a bilinear optimal control problem for a diffusive Lotka-Volterra competition model with chemo-repulsion in a bounded domain of ℝ^(ℕ),N=2,3.This model describes the competition of two species in which one of them avoid encounters with rivals through a chemo-repulsion mechanism.We prove the existence and uniqueness of weak-strong solutions,and then we analyze the existence of a global optimal solution for a related bilinear optimal control problem,where the control is acting on the chemical signal.Posteriorly,we derive first-order optimality conditions for local optimal solutions using the Lagrange multipliers theory.Finally,we propose a discrete approximation scheme of the optimality system based on the gradient method,which is validated with some computational experiments.

A Modified Lagrange Method for Solving Convex Quadratic Optimization Problems

In this paper, a modified version of the Classical Lagrange Multiplier method is developed for convex quadratic optimization problems. The method, which is evolved from the first order derivative test for optimality of the Lagrangian function with respect to the primary variables of the problem, decomposes the solution process into two independent ones, in which the primary variables are solved for independently, and then the secondary variables, which are the Lagrange multipliers, are solved for, afterward. This is an innovation that leads to solving independently two simpler systems of equations involving the primary variables only, on one hand, and the secondary ones on the other. Solutions obtained for small sized problems (as preliminary test of the method) demonstrate that the new method is generally effective in producing the required solutions.

Optimization of Conditions for the Extraction of Melanin from Walnut Husk

[Objective] This study was conducted optimize the conditions for the ex- traction of melanin from walnut husk. [Method] Melanin was isolated from walnut husk through alkali extraction and acid precipitation, and the factors that may influ- ence the extraction efficiency： temperature, duration, NaOH concentration and solid- liquid ratio were set at different levels. [Result] The optimal conditions for the ex- traction of melanin from walhut husk were temperature of 80 ℃, extraction duration of 120 min, NaOH concentration of 70 mol/L, and solid-liquid ratio of 1：20. [Conclu- sion] The optimal conditions for the extraction of melanin from walnut husk deter- mined in the present study will provide references for the development and utiliza- tion of natural melanin.

Optimum conditions to treat high-concentration microparticle slime water with bioflocculants

We studied how bioflocculants,produced by white-rot fungi,affect flocculation in slime water.Based on a test in an orthogonal design,flocculation conditions were optimized.The results show that flocculation activity is at its highest when the following conditions are met:slime water concentration 27.42 g/L;coagulant aid(CaCl_2) mass concentration 5.0 g/L;two-segment stirrings:the first at a stirring speed of 60 r/min for 180 s and the second 180 r/min for 60 s;a pH of 11 and a flocculant concentration of 15 mL/L.The flocculation activity can be up to 98.71%of bioflocculants at the time.Further experiments indicate that most of the flocculation active material is found outside the mycelium cells.This is the extracellular secretion produced by mycelium cells during the fermentation process.This flocculant has strong thermal stability.Many kinds of cations have a flocculation function to assist bioflocculants.This aid-flocculation effect of the divalent cation Ca^(2+) is obvious in the bioflocculant produced by the white-rot fungus.Therefore,this is of great value when applied to control engineering in the battle against water pollution.

SECOND-ORDER OPTIMALITY CONDITIONS FOR OPTIMAL CONTROL PROBLEMS GOVERNED BY 3-DIMENSIONAL NEVIER-STOKES EQUATIONS

This article is concerned with second-order necessary and sufficient optimality conditions for optimal control problems governed by 3-dimensional Navier-Stokes equations. The periodic state constraint is considered.

OPTIMALITY CONDITIONS AND DUALITY RESULTS FOR NONSMOOTH VECTOR OPTIMIZATION PROBLEMS WITH THE MULTIPLE INTERVAL-VALUED OBJECTIVE FUNCTION

In this paper, both Fritz John and Karush-Kuhn-Tucker necessary optimality conditions are established for a （weakly） LU-efficient solution in the considered nonsmooth multiobjective programming problem with the multiple interval-objective function. Further, the sufficient optimality conditions for a （weakly） LU-efficient solution and several duality results in Mond-Weir sense are proved under assumptions that the functions constituting the considered nondifferentiable multiobjective programming problem with the multiple interval- objective function are convex.

Optimal reaction conditions for pyridine synthesis in riser reactor

Pjridine has been generally synthesized by aldehydes and ammonia in a turbulent fluidized-bed reactor. In this paper, a novel riser reactor was proposed for pyridine synthesis. Experiment result showed that the yield of pyridine and 3-picoline decreased, but the selectivity of pyridine over 3-picoline increased compared to turbulent fluidized-bed reactor. Based on experimental data, a modified kinetic model was used for the determination of optimal operating condition for riser reactor. The optimal operating condition of riser reactor given by this modified model was as follows： The reaction temperature of 755 K, catalyst to feedstock ratio （CTFR） of 87, residence timeof3.8sandinitialacetaldehydesconcentrationof0.0029mol.L-1 （acetaldehydes to formaldehydes ratio by mole （ATFR） of 0.65 and ammonia to aldehydes ratio by mole （ATAR） of 0.9, water contention of 63wt% （formaldehyde solution））.

Sufficient Optimality Conditions for Multiobjective Programming Involving (V, ρ)h,ψ-type Ⅰ Functions

New classes of functions namely (V, ρ)_(h,φ)-type I, quasi (V, ρ)_(h,φ)-type I and pseudo (V, ρ)_(h,φ)-type I functions are defined for multiobjective programming problem by using BenTal's generalized algebraic operation. The examples of (V, ρ)_(h,φ)-type I functions are given. The sufficient optimality conditions are obtained for multi-objective programming problem involving above new generalized convexity.

THE OPTIMALITY CONDITIONS OF NONCONVEXSET-VALUED VECTOR OPTIMIZATION

The concepts of alpha-order Clarke's derivative, alpha-order Adjacent derivative and alpha-order G.Bouligand derivative of set-valued mappings are introduced, their properties are studied, with which the Fritz John optimality condition of set-valued vector optimization is established. Finally, under the assumption of pseudoconvexity, the optimality condition is proved to be sufficient.

Optimization of elastolysis conditions and elastolytic kinetic analysis with elastase from Bacillus licheniformis ZJUEL31410

The solubilization of elastin by Bacillus licheniformis elastase cannot be analyzed by conventional kinetic methods because the biologically relevant substrate is insoluble and the concentration of enzyme-substrate complex has no physical meaning. In this paper we report the optimization of elastolysis conditions and analysis of elastolytic kinetics. Our results indicated that the hydrolyzing temperature and time are very important factors affecting elastolysis rate. The optimized conditions using central composite design were as follows： elastolysis temperature 50 ℃, elastase concentration 1 × 10^4 U/ml, elastin 80 mg, elastolytic time 4 h. Investigation of the effects of substrate content, elastase concentration and pH was also revealed that low or high elastin content inhibits the elastolysis process. Increasingelastase improves elastin degradation, but high elastase may change the kinetics characterization. Alkaline environment can decrease elastin degradation rate and pH may affect elastolysis by changing elastase reaction pH. To further elucidate the elastolysis process, the logistic model was used to elastolysis kinetics study showing clearly that the logistic model can reasonably explain the elastolysis process, especially under lower elastase concentration. However, there is still need for more investigations with the aid of other methods, such as biochemical and molecular methods.

Global optimality conditions for quadratic 0-1 programming with inequality constraints

Quadratic 0-1 problems with linear inequality constraints are briefly considered in this paper.Global optimality conditions for these problems,including a necessary condition and some sufficient conditions,are presented.The necessary condition is expressed without dual variables.The relations between the global optimal solutions of nonconvex quadratic 0-1 problems and the associated relaxed convex problems are also studied.

Optimality conditions and duality for a class of nondifferentiable multiobjective generalized fractional programming problems

This paper studies a class of multiobjective generalized fractional programming problems, where the numerators of objective functions are the sum of differentiable function and convex function, while the denominators are the difference of differentiable function and convex function. Under the assumption of Calmness Constraint Qualification the Kuhn-Tucker type necessary conditions for efficient solution are given, and the Kuhn-Tucker type sufficient conditions for efficient solution are presented under the assumptions of （F, α, ρ, d）-V-convexity. Subsequently, the optimality conditions for two kinds of duality models are formulated and duality theorems are proved.

Optimality Conditions and Duality for Nonsmooth Multiobjective Programms with Generalized Essential Convexity

In this paper, we introduce generalized essentially pseudoconvex function and generalized essentially quasiconvex function, and give sufficient optimality conditions of the nonsmooth generalized convex multi-objective programming and its saddle point theorem about cone efficient solution. We set up Mond-Weir type duality and Craven type duality for nonsmooth multiobjective programming with generalized essentially convex functions, and prove them.

Optimization of the operating conditions in a TiO_2/Fe_3O_4-SiO_2 photocatalytic reactor for the treatment of industrial wastewater containing Procion Red MX-5B

According to the design principle of the central composite experimental,the method of response surface analysis with three factors and three levels was adopted based on one factor test.A second-order quadratic equation for photocatalysis of Procion Red MX-5B was built.Response surface and contour were graphed with the decoloration rate of Procion Red MX-5B as the response value.Based on the analysis of the response surface plots and their corresponding contour plots,effects of pH value,irradiation time and catalyst loading were explored.By using this new method,the optimum decoloration condition was obtained as follows:pH value,1.3;irradiation time,49.9 min;catalyst loading,0.57 g/L.In the optimization,R-Squared and Adj R-Squared correlation coefficients for quadratic model were evaluated quite satisfactorily as 0.9310 and 0.8620,respectively.Under the optimum conditions established,the performance of 99.47% for color removal was experimentally reached.It was found that all factors considered have an important effect on the decolorization efficiency of Procion Red MX-5B.By the ANOVA analysis and model confirmation the optimal solution obtained using RSM was experimentally validated and credible with preferable instructional ability for experiments.

Optimization of reaction conditions for the electroleaching of manganese from low-grade pyrolusite

In the present study, a response surface methodology was used to optimize the electroleaching of Mn from low-grade pyrolusite. Ferrous sulfate heptahydrate was used in this reaction as a reducing agent in sulfuric acid solutions. The effect of six process variables, including the mass ratio of ferrous sulfate heptahydrate to pyrolusite, mass ratio of sulfuric acid to pyrolusite, liquid-to-solid ratio, current density, leaching temperature, and leaching time, as well as their binary interactions, were modeled. The results revealed that the order of these factors with respect to their effects on the leaching efficiency were mass ratio of ferrous sulfate heptahydrate to pyrolusite 〉 leaching time 〉 mass ratio of sulfuric acid to pyrolusite 〉 liquid-to-solid ratio 〉 leaching temperature 〉 current density. The optimum conditions were as follows： 1.10：1 mass ratio of ferrous sulfate heptahydrate to pyrolusite, 0.9：1 mass ratio of sulfuric acid to pyrolusite, liquid-to-solid ratio of 0.7：1, current density of 947 A/m^2, leaching time of 180 min, and leaching temperature of 73°C. Under these conditions, the predicted leaching efficiency for Mn was 94.1%; the obtained experimental result was 95.7%, which confirmed the validity of the model.

Necessary Optimality Conditions for Multi-Objective Semi-Infinite Variational Problem

In this paper, necessary optimality conditions for a class of Semi-infinite Variational Problems are established which are further generalized to a class of Multi-objective Semi-Infinite Variational Problems. These conditions are responsible for the development of duality theory which is an extremely important feature for any class of problems, but the literature available so far lacks these necessary optimality conditions for the stated problem. A lemma is also proved to find the topological dual of as it is required to prove the desired result.

Optimality conditions in set optimization employing higher-order radial derivatives

There are two approaches of defining the solutions of a set-valued optimization problem： vector criterion and set criterion. This note is devoted to higher-order optimality conditions using both criteria of solutions for a constrained set-valued optimization problem in terms of higher-order radial derivatives. In the case of vector criterion, some optimality conditions are derived for isolated （weak） minimizers. With set criterion, necessary and sufficient optimality conditions are established for minimal solutions relative to lower set-order relation.

Dynamic heating and thermal destruction conditions of quartz particles in polydisperse plasma flow of RF-ICP torch system

Numerical simulation of turbulent mixing process of polydisperse quartz particle(particle size distribution in the range of 0.1-0.4 mm)flow with Ar and Ar-H2 plasma generated by radio frequency inductively coupled plasma(RF-ICP)torch has been made.An approximate two-stage approach has been proposed to calculate the spatial-temporal distributions of temperature and resulting thermal stress in quartz particles during dynamic heating in polydisperse plasma flow.The influence of working gas compositions,particle size distributions,injection angle and flow rate of carrier gas on the thermal destruction conditions of quartz particles has been determined under different particle feed rates.It is found that all the solid quartz particles(0.1-0.4 mm)could be thermal destructed without overheating in RF-ICP torch system,when the hydrogen volume fraction in working gases is more than 1.5%-2%and particle feed rate is in a certain range.The values of the maximum and minimum feed rates have been determined under different hydrogen volume fractions.An optimal particle injection angle and flow rate of carrier gas is found around 50°-60°and 160-220 slpm,under which the value of maximum equivalent thermal stress in quartz particles is highest.