Fracture propagation,proppant transport and parameter optimization of multi-well pad fracturing treatment

This paper establishes a 3D multi-well pad fracturing numerical model coupled with fracture propagation and proppant migration based on the displacement discontinuity method and Eulerian-Eulerian frameworks,and the fracture propagation and proppant distribution during multi-well fracturing are investigated by taking the actual multi-well pad parameters as an example.Fracture initiation and propagation during multi-well pad fracturing are jointly affected by a variety of stress interference mechanisms such as inter-cluster,inter-stage,and inter-well,and the fracture extension is unbalanced among clusters,asymmetric on both wings,and dipping at heels.Due to the significant influence of fracture morphology and width on the migration capacity of proppant in the fracture,proppant is mainly placed in the area near the wellbore with large fracture width,while a high-concentration sandwash may easily occur in the area with narrow fracture width as a result of quick bridging.On the whole,the proppant placement range is limited.Increasing the well-spacing can reduce the stress interference of adjacent wells and promote the uniform distribution of fractures and proppant on both wings.The maximum stimulated reservoir volume or multi-fracture uniform propagation can be achieved by optimizing the well spacing.Although reducing the perforation-cluster spacing also can improve the stimulated reservoir area,a too low cluster spacing is not conducive to effectively increasing the propped fracture area.Since increasing the stage time lag is beneficial to reduce inter-stage stress interference,zipper fracturing produces more uniform fracture propagation and proppant distribution.

Productivity analysis of horizontal wells intercepted by multiple finite-conductivity fractures

Horizontal wells in the anisotropic reservoirs can be stimulated by hydraulic fracturing in order to create multiple finite-conductivity vertical fractures. Several methods for evaluating the productivity of the horizontal wells have been presented in the literature. With such methods, however, it is still difficult to obtain an accurate result. This paper firstly presents the dimensionless conductivity theory of vertical fractures. Then models for calculating the equivalent wellbore radius and the skin factor due to flow convergence to the well bore are proposed after analyzing the steady-state flow in porous reservoirs. By applying the superposition principle to the pressure drop, a new method for evaluating the productivity of horizontal wells intercepted by multiple finite-conductivity fractures is developed. The influence of fracture conductivity and fracture half length on the horizontal well productivity is quantitatively analyzed with a synthetic case. Optimum fracture number and fracture space are further discussed in this study. The results prove that the method outlined here should be useful to design optimum fracturing of horizontal wells.

Productivity model for gas reservoirs with open-hole multi-fracturing horizontal wells and optimization of hydraulic fracture parameters

Multi-fractured horizontal wells are commonly employed to improve the productivity of low and ultra-low permeability gas reservoirs.However,conventional productivity models for open-hole multi-fractured horizontal wells do not consider the interferences between hydraulic fractures and the open-hole segments,resulting in significant errors in calculation results.In this article,a novel productivity prediction model for gas reservoirs with open-hole multi-fractured horizontal wells was proposed based on complex potential theories,potential superimposition,and numerical analysis.Herein,an open-hole segment between two adjacent fractures was regarded as an equivalent fracture,which was discretized as in cases of artificial fractures.The proposed model was then applied to investigate the effects of various parameters,such as the angle between the fracture and horizontal shaft,fracture quantity,fracture length,diversion capacity of fractures,horizontal well length,and inter-fracture distance,on the productivity of low permeability gas reservoirs with multi-fractured horizontal wells.Simulation results revealed that the quantity,length,and distribution of fractures had significant effects on the productivity of low permeability gas reservoirs while the effects of the diversion capacity of fractures and the angle between the fracture and horizontal shaft were negligible.Additionally,a U-shaped distribution of fracture lengths was preferential as the quantity of fractures at shaft ends was twice that in the middle area.

Optimization of fracturing parameters for tight oil production based on genetic algorithm

It is difficult to determine the main controlling factors of tight oil production.In addition to the problem of uncontrollable prediction accuracy,the numerical prediction model established by the main controlling factors will also make the correctly predicted low production samples lose the value of development.Applying the optimization algorithm with fast convergence speed and global optimization to optimize the controllable parameters in the high-precision numerical prediction model can effectively improve the productivity of low production wells with timeliness,and bring greater economic value while saving development cost.Using PCA-GRA method,the sample weight and the weighted correlation ranking results of parameters affecting tight oil production were obtained.Thereupon then the main controlling factors of tight oil production were determined.Then we set up a BP neural network model with by taking the main controlling factors as input and tight oil production as output.The prediction effect of the network was good and can be put into use.The results of sensitivity analysis showed that the network was stable,and the total fracturing fluid volume had the greatest impact on the production of tight oil.Finally,by using genetic algorithm,we optimized the fracturing parameters of all low production well samples in the field data.Combined with the fracturing parameters of all high production well samples and the optimized fracturing parameters of low production wells,the optimal interval of fracturing parameters was given,which can provide guidance for the field fracturing operation.

Incubation time approach in rock fracture dynamics

The paper is summarizing latest results connected with application of the incubation time approach to problems of dynamic fracture of rock materials. Incubation time based fracture criteria for intact media and media with cracks are discussed. Available experimental data on high rate fracture of different rock materials and incubation time based fracture criteria are used in order to evaluate critical parameters of causing fracture in these materials. Previously discovered possibility to optimize (minimize) energy input for fracture is discussed in connection to industrial rock fracture processes. It is shown that optimal value of momentum associated with critical load in order to initialize fracture in rock media does strongly depend on the incubation time and the impact duration. Existence of optimal load shapes minimizing momentum for a single fracturing impact or a sequence of periodic fracturing impacts is demonstrated.