Structural patterns of land types and optimal allocation of land use in Qinling Mountains

The case study based on Qinling Mountains in Shaanxi Province of China, in virtue of the information from TM image, classifies the land types and analyzes their spatial and temporal differential law, and puts forward three structural patterns of land types in mountainous areas, namely, spatial, quantitative and qualitative structures of mountainous land types. Furthermore, it has been noticed that the analysis of structural patterns can disclose the heterogeneity and orderliness of combination of land types, which can lay the theoretic foundation for comprehensively recognizing ecological characteristics and succession law of structure and function of land types. After the all-around comparative analysis, an optimal allocation of land use in Qinling Mountains has been put forward according to the principle of sustainable development and landscape ecology, which can lay the scientific foundation in practice for the structural adjustment and distribution optimization from the macro level to micro level.

The Characteristics of Ore-Controlling Structure in Baoshan Cu-Pb-Zn Polymetallic Deposit,Hunan Province

The Baoshan Cu-Pb-Zn polymetallic deposit is lied in the central Nanling mineralization zone,and belongs to the junction area of the Chenzhou-Linwu fault zone and the Leiyang-Linwu fault zone.It is a significant part of Nanling polymetallic deposit belt.The outcropping stratas consist of upper Devonian Shetianqiao,Xikuangshan Formation,Lower Carboniferous Menggong’ao,Shidengzi,Ceshui,and Zimenqiao Formation.Igneous rocks in the Baoshan ore area mainly comprise granodiorite porphyry.Furthermore,the radio isotopic age ranges from 123 Ma to 183 Ma,belonging to the early to middle Yanshanian.

Structural patterns of fault damage zones in carbonate rocks and their influences on petroleum accumulation in Tazhong Paleo-uplift, Tarim Basin, NW China

Based on the outcrop survey,3D seismic data interpretation,drilling data analysis,the structural patterns and distribution of fault damage zones in carbonate strata of Tazhong Paleo-uplift were established to reveal the oil and gas enrichment law in the fault damage zones.The following findings were reached:(1)Through the filed survey,the fault damage zone system consists of fault core,damage zone with branch fault and fracture network.Affected by the active nature of the major faults,the fault damage zones differ in planar pattern and scale along the major faults.(2)3D seismic profiles reveal that there are three types of fault damage zones in carbonate strata in Tazhong paleo-uplift,strike-slip fault damage zones,thrust fault damage zones and superimposed fault damage zones.Featuring3 flowers and 3 root belts in vertical,the strike-slip fault damage zone can be subdivided into linear type,oblique type,feather type and horsetail type in plane.Thrust fault damage zones can be further divided into fault anticline type,anticline type and slope type.As the superimposition result of the above two kinds of fault damage zones,superimposed fault damage zones appear in three patterns,intersect type,encompassment type and penetrating type.(3)Cores from wells and geochemical data show oil and gas may migrate along the major fault and laterally.The feather type in strike-slip fault system,fault anticline type in thrust fault damage zone and intersect type in superimposed fault damage zone are possible sites for high production and efficiency wells.

Characteristics of Spatial Structural Patterns and Temporal Variability of Annual Precipitation in Ningxia

[Objective] The aim was to study the characteristics of the spatial structural patterns and temporal variability of annual precipitation in Ningxia.[Method] Using rotated empirical orthogonal function,the precipitation concentration index,wavelet analysis and Mann-Kendall rank statistic method,the characteristics of precipitation on the spatial-temporal variability and trend were analyzed by the monthly precipitation series in Ningxia during 1951-2008.[Result] In Ningxia,the spatial structural patterns of annual precipitation appeared 'North-south type' and 'North-center-south type'.It increased from north to south,the changes of interannual precipitation decreased from north to south.Precipitation changed significantly in month and distributed differently in the Yellow River irrigation area.But it was conversely steady in central arid zone and mountainous area of southern Ningxia.The probability of single abundant precipitation year was higher than single short precipitation year and the continuous short precipitation year was higher than continuous abundant precipitation year.The main cycles were 3a,6a and 10a approximately.In the mid arid zone and the mountainous area of southern Ningxia,the probability of precipitation reduction was about 75% and the Yellow river irrigation area,71.4%,respectively.The reduction in the entire area was about 73.3%.The annual precipitation in the middle arid area and irrigation area was increasing.The variability would change slowly for the intra-annual distribution of precipitation.Especially,the reduction tendency rate in the middle arid area reached 100.0%.[Conclusion] The study provided references for the effective utilization of the local precipitation,and the coordinated development of the regional social economy and ecological environment.

Analysis of Ore-controlling Structure in the Qifengcha-Detiangou Gold Deposit,Huairou County,Beijing

The Qifengcha-Detiangou gold deposit is a medium-sized deposit recently found in Huairou County, Beijing. It belongs to the altered mylonite type with superimposed quartz vein type and is related to the early Yanshanian magmatic activity. Characterized by multiperiodic activity, the NE-trending Qifengcha fault is a regional ore-controlling structure in the area, and gold mineralization develops only in its southeastern part. Meanwhile, gold mineralization is controlled by the Yunmengshan metamorphic core complex. The nearly N-S- and E-W-trending low-angle detachment faults, reformed by the Qifengcha fault in the northwestern part of the core complex, are the main ore-bearing faults. All discovered gold deposits are located within an area 1.5–4.0 km away from the boundary of the upwelling centre. The N-S- (NNE-) and E-W-trending ore-bearing faults are ductile-brittle structural zones developing in shallow positions and subjected mainly to compressive deformation. The structural ore-controlling effects are as follows. (1) The attitude, shape, and distribution of gold orebodies are controlled by faults. (2) There is a negative correlation between the gold abundance and the magnetic anisotropy (P) of the altered mylonite samples from the deposit, which shows that the gold mineralization is later than the structural deformation. (3) Quartz vein type mineralization is superimposed on altered mylonite type mineralization. (4) In mineralized mylonite, the stronger the ductile shear deformation, the easier the late-stage gold mineralization to occur and the higher the gold abundance. The richest gold mineralization occurs only around the centre of the fault subjected to the strongest deformation.

Analysis of Ore-Controlling Structures of the Xincheng-Hexi Gold Deposit,Shandong Province,China

Based on quantitative and semi-quantitative mathematical and mechanical analysis of the shape, motion, structural factors, stress field and deformation field of the ore-hosting faults in the Xincheng-Hexi gold deposit, the ore-controlling features of faults and mineralization mechanism are discussed. It is concluded that the mineralization is controlled by the main faults, subsidiary fractures, joint density, mechanical features and deformation of the faults. The ore bodies are mainly located in the lower part of the convex crest and upper part of the concave trough of the main undulating fault surface. Mineralization is positively correlated to the development of subsidiary fractures and joints, which correspond to zones of low internal stress and high body strain and shear strain. They are favourable positions for mineralization and alteration.

Ore-controlling Regularities of Thrust-fold structures and features of Tectono-geochemical Anomalies at the Xiaozhuqing Exploration Area in the Huize Zn-Pb District

1 Introduction The huize Zn-Pb ore district in Yunnan province is locatedinthecentralsouthernofthe Sichuan—Yunnan—GuizhouPb-ZnPoly-metallic Mineralization Area in the southwestern margin of the Yangtze Block,and is strictly controlled by fault structures.It has developed to one of the famous production bases of lead&zinc and germanium in China.

Study on the Diffraction Patterns of α"-Fe_(16)N_2 with Jack-1 and Jack-2 Structural Parameters

Two body centered tetragonal (bet) crystal structures of α'-Fe_(16)N_2 with x=0.25, z=0.3125 (Jack-1) and x=0.222, z=0.306 (Jack-2) respectively, were analyzed theoretically with EMS software package. The simulation of diffraction patterns indicates that both diffraction patterns of the same axis in these two structures obey bcc extinction rule. The conclusion is also obtained from the analyses of the diffracted waves. α'-Fe_(16)N_2 precipitates in the diffusion layer of ion-nitrided α-iron have been studied with transmission electron microscope (TEM). We have distinctly observed the electron diffraction patterns of α'-Fe_(16)N_2 in [100], [111], [110], [011], [210], [021], [311], [113], [331] and [133] zone axes with perfect symmetry, which indicate the parallel orientation relationship with α matrix:<001>α'//<001>α'// {100}.α'// {100}ｔα. The analyses of diffraction patterns, which obey bcc extinction rule, verify the bct structure of α'-Fe_(16)N_2 discovered by X-ray diffraction.

GEOCHEMICAL REASERCH ON ORE-CONTROLLING STRUCTURE IN LIAODONG LUOQUANBEI-BAIYUN GOLD MINERAL BELT

In recent2 0 years,because of the finding ofmany large- superlargegold deposits,we re- new the theories for prospecting and gain many things and conceptions.The current geo- chemical and gold- forming theories underline the importance of the early submarine volcano- sedimentation,metamorphic differention,sedimentation of terrigenous clastics,thermal spring and it’s sedimentation,syngenesis process and other hypergene supplying the source for metallogenic materials.According to the study for source bed(rock) and depsitional for- mation of gold,we find that gold will be gradually enriched and mineralized in source bed (rock) ,because of variousgeologicprocesses,such as regional metamorphism ormigmatiza- tion,geothermal bittern,volcanism. The ore- control of deep and giant fault and ductile shear beltand tectono- flash space is emphasized,especially,we should notice the long- term, succession and multistage of the

Assessment of Structural Damage Condition Based on Fuzzy Pattern Recognition

This paper presents a new method of damage condition assessment that allows accommodating other types of uncertainties due to ambiguity, vagueness, and fuzziness that are statistically nondescribable. In this method, healthy observations are used to construct a fury set representing sound performance characteristics. Additionally, the bounds on the similarities among the structural damage states are prescribed by using the state similarity matrix. Thus, an optimal group fuzzy sets representing damage states such as little, moderate, and severe damage can be inferred as an inverse problem from healthy observations only. The optimal group of damage fuzzy sets is used to classify a set of observations at any unknown state of damage using the principles of fitzzy pattern recognition based on an approximate principle . This method can be embedded into the system of Structural Health Monitoring （SHM） to give advice about structural maintenance and life predictio comes from Reference [ 9 ] for damage pattern recognition is presented n. Finally, a case and discussed. The study, which compared result illustrates our method is more effective and general, so it is very practical in engineering.

A Tree Pattern Matching Algorithm for XML Queries with Structural Preferences

In the XML community, exact queries allow users to specify exactly what they want to check and/or retrieve in an XML document. When they are applied to a semi-structured document or to a document with an overly complex model, the lack or the ignorance of the explicit document model (DTD—Document Type Definition, Schema, etc.) increases the risk of obtaining an empty result set when the query is too specific, or, too large result set when it is too vague (e.g. it contains wildcards such as “*”). The reason is that in both cases, users write queries according to the document model they have in mind;this can be very far from the one that can actually be extracted from the document. Opposed to exact queries, preference queries are more flexible and can be relaxed to expand the search space during their evaluations. Indeed, during their evaluation, certain constraints (the preferences they contain) can be relaxed if necessary to avoid precisely empty results;moreover, the returned answers can be filtered to retain only the best ones. This paper presents an algorithm for evaluating such queries inspired by the TreeMatch algorithm proposed by Yao et al. for exact queries. In the proposed algorithm, the best answers are obtained by using an adaptation of the Skyline operator (defined in relational databases) in the context of documents (trees) to incrementally filter into the partial solutions set, those which satisfy the maximum of preferential constraints. The only restriction imposed on documents is No-Self-Containment.

Population structure and distribution pattern of Taxus cuspidata in Muling region of Heilongjiang Province, China

An investigation was conducted on distribution pattern, site condition and population structure of yew Taxus cuspidata Sieb. et Zucc. in Muling Forest Bureau of Heilongjiang Province, China in April, 2005. Results showed that yew is mainly distributed under the main storey of natural mixed forest of conifer and broadleaf, the soil moisture content of the yew site is high （40%-60%）, the pH value of soil is relatively lower （4.7-5.5）, and that the population structure of wild yew is not rational, belonging to the degeneration population, which is one of the reasons leading to the population decline. Although the site conditions of Muling area are suitable for the growth of wild yew, the population of wild yew shows a decline tendency, due to the fact that the middle-sized adult yew trees have been cut, young yews are often grazed by wildlife, and that the trunks of adult yew tend to be hollow.

Spatial pattern analysis for quantification of landscape structure of Tadoba-Andhari Tiger Reserve,Central India

Landscape structure is often regarded as an important factor that governs the distribution and abundance of species. Therefore it is critical to understand the landscapes and their dynamics. Patterns of landscape elements strongly influence the ecological characteristics. This study was designed to document and map the current status of the tropi-cal dry deciduous forest of the Tadoba-Andhari Tiger Reserve （TATR）, Central India, （using IRS P6 LISS IV data） and to describe its landscape structure at three levels of organization viz. landscape, class, and patch. The study area was classified into 10 land cover classes that include 6 vegetation classes. The landscape structure was analyzed using FRAG-STATS using 12 set of indices. The TATR landscapes have a total of 2,307 patches with a mean patch size of 25.67 ha and patch density of 1.7 patches per km2. Amongst all land cover classes, mixed bamboo forest is dominant-it occupied maximum area （77.99%）-while riparian forest is least represented （0.32%）. Mixed forest has maximum number of patches among all vegetation classes. Results have shown that despite being dominant in the area, mixed bamboo forest has low patch density （0.25/100 ha）. Dominance of mixed bamboo forest is attributed to large patch sizes and not to the number of patches. This study has focussed on the approach of integrating satellite forest classification and forest inven-tory data for studying forest landscape patterns.

Population structure and spatial pattern analysis of Quercus aquifolioides on Sejila Mountain,Tibet,China

Understanding population structure provides basic ecological data related to species and ecosystems.Our objective was to understand the mechanisms involved in the maintenance of Quercus aquifolioides populations.Using a 1 ha permanent sample plot data for Q.aquifolioides on Sejila Mountain,Tibet Autonomous Region(Tibet),China,we analyzed the population structure of Q.aquifolioides by combining data for diameter class,static life table and survival curve.Simultaneously,the spatial distribution of Q.aquifolioides was studied using Ripley’s L Function in point pattern analysis.The results showed:(1) Individuals in Q.aquifolioides populations were mainly aggregated in the youngest age classes,that accounted for94.3% of the individuals; the older age classes had much smaller populations.Although the youngest age classes(ClassesⅠ and Ⅱ) had fewer individuals than Class Ⅲ,the total number of individuals in classes Ⅰ and Ⅱ was also greater than in classes Ⅳ to Ⅸ.In terms of tree height,fewsaplings,more medium-sized saplings and few large-sized trees were found.The diameter class structure of Q.aquifolioides populations formed an atypical ‘pyramid’type; the population was expanding,but growth was limited,tending toward a stable population.(2) Mortality of Q.aquifolioides increased continuously with age; life expectancy decreased over time,and the survivorship curve was close to a Deevey I curve.(3) The spatial distribution pattern of Q.aquifolioides varied widely across different developmental stages.Saplings and medium-sized tree showed aggregated distributions at the scales of 0–33 m and 0–29 m,respectively.The aggregation intensities of saplings and medium-sized trees at small scales were significantly stronger than that of large-sized trees.However,large-sized trees showed a random distribution at most scales.(4) No correlation was observed among saplings,medium-and large-sized trees at small scales,while a significant and negative association was observed as the scale increased.Strong competition was found among saplings,medium-and large-sized trees,while no significant association was observed between medium-and largesized trees at all scales.Biotic interactions and local ecological characteristics influenced the spatial distribution pattern of Q.aquifolioides populations most strongly.

The Structure and Pattern of Urban Network in the Lanzhou-Xining Urban Agglomeration

In this paper,we use factor analysis to evaluate the urban comprehensive quality of each city in the Lanzhou-Xining(Lan-Xi)urban agglomeration.The time distance was obtained by using GIS spatial analysis,and the structure and pattern of the spatial network were analyzed by using the gravity model and social network analysis method.The results show that:1)The scale effect of the Lan-Xi urban agglomeration is gradually emerging,and it is gradually forming the urban agglomeration with Lanzhou and Xining as the core,the Lan-Xi high-speed railway as the axis,and a high-dense connection.2)Lanzhou and Xining are at the core of the Lan-Xi urban agglomeration,which has a strong attraction and spreads to neighboring cities.3)In the network structure of the Lan-Xi urban agglomeration,Lanzhou,Baiyin,Gaolan,Yuzhong,Yongdeng,Dingxi,Lintao,Xining,Ledu,Huangzhong,Ping’an,Minhe and Datong are located in the network core position,which have the superiority position and lead to the entire regional communication enhancement and the regional integration development.4)This urban agglomeration has significant subgroups,eight tertiary subgroups and four secondary subgroup;the tertiary subgroups which compose secondary subgroup have a close connection and mutually influence each other.5)The Lanzhou Metropolitan Area and the Xining Metropolitan Area have an important impact on the surrounding cities,and the peripheral cities are basically controlled by the central city.The Dingxi subgroup,Lintao-Linxia subgroup,Gonghe subgroup have more structural holes than the subgroups within the Lanzhou Metropolitan Area and the Xining Metropolitan Area,so the peripheral cities of these subgroups have relatively less connection with surrounding cities.

Structure and production fluid flow pattern of post-fracturing high-rank coal reservoir in Southern Qinshui Basin

Field geological work, field engineering monitoring, laboratory experiments and numerical simulation were used to study the development characteristics of pore-fracture system and hydraulic fracture of No.3 coal reservoir in Southern Qinshui Basin. Flow patterns of methane and water in pore-fracture system and hydraulic fracture were discussed by using limit method and average method. Based on the structure model and flow pattern of post-fracturing high-rank coal reservoir, flow patterns of methane and water were established. Results show that seepage pattern of methane in pore-fracture system is linked with pore diameter, fracture width, coal bed pressure and flow velocity. While in hydraulic fracture, it is controlled by fracture height, pressure and flow velocity. Seepage pattern of water in pore-fracture system is linked with pore diameter, fracture width and flow velocity. While in hydraulic fracture, it is controlled by fracture height and flow velocity. Pores and fractures in different sizes are linked up by ultramicroscopic fissures, micro-fissures and hydraulic fracture. In post-fracturing high-rank coal reservoir, methane has level-three flow and gets through triple medium to the wellbore; and water passes mainly through double medium to the wellbore which is level-two flow.

Preparation and promising optoelectronic applications of lead halide perovskite patterned structures:A review

Lead halide perovskites have received considerable attention from researchers over the past several years due to their superior optical and optoelectronic properties,because of which they can be a versatile platform for fundamental science research and applications.Patterned structures based on lead halide perovskites have much more novel properties compared with their more commonly seen bulk-,micro-,and nano-crystals,such as improvement in antireflection,light-scattering effects,and light absorption,as a result of their adjustability of spatial distributions.However,there are many challenges yet to be resolved in this field,such as insufficient patterned resolution,imperfect crystal quality,complicated preparation process,and so on.To pave the way to solve these problems,we provide a systematic presentation of current methods for fabricating lead halide perovskite patterned structures,including thermal imprint,use of etching films,two-step vapor-phase growth,template-confined solution growth,and seed-assisted growth.Furthermore,the advantages and disadvantages of these methods are elaborated in detail.In addition,thanks to the extraordinary properties of lead halide perovskite patterned structures,a variety of potential applications in optics and optoelectronics of these structures are described.Lastly,we put forward existing challenges and prospects in this exciting field.

Mineralization and Ore-controlling Implications of Low-angle Faults

Abstract Low-angle faults include those occurring in thrust-nappe structures in a compressive setting and the detachment of metamorphic core complexes in an extensional setting. All low-angle faults have their own particularities. The low-angle fault plays an important role in controlling over some endogenetic metallic ore deposits. Based on studies of the Xiaoban gold deposit, Xinzhou gold deposit, and Longfengchang polymetallic ore deposit, and comparisons with other mines, the authors conclude the ore-controlling implications of low-angle faults as follows. (1) Because of high temperature and high pressure, as well as strong ductile deformation, the internal energy of the elements rises in the large-scale deep ductile low-angle faults, which causes the elements to activate and differentiate from the source rocks, forming ore-bearing hydrothermal solution, and bring mineralization to happen. (2) When rising from depths and flowing along the low-angle faults, the ore-bearing hydrothermal solution will alter and replace the tectonites in the fault zone. The rocks of the hanging side and the heading side differ in lithology, texture and structure, which results in changes or dissimilarities of the physical-chemical conditions. This destroys the balance of the hydrothermal solution system and causes the dissolved ore-forming elements to precipitate; as a result, a deposit is formed. Therefore, the meso-shallow ductile-brittle low-angle faults play the role of a geochemical interface in the process of mineralization. (3) Low-angle faults are often one of the important host structures.

Novel mechanical behavior of periodic structure with the pattern transformation

Abstract In periodic cellular structures, novel pattern transformations are triggered by a reversible elastic instability under the axial compression. Based on the deformation-triggered new pattern, periodic cellular structures can achieve special mechanical properties. In this paper, the designed architecture materials which include elastomer matrixes containing empty holes or filled holes with hydrogel material are modeled and simulated to investigate the mechanical property of the periodic materials. By analyzing the relationship between nominal stress and nominal strain of periodic material, and the corresponding deformed patterns, the influence of geometry and shapes of the holes on the mechanical property of architecture material is studied in more details. We hope this study can provide future perspectives for the deformation-triggered periodic structures.

Smooth cutting pattern generation technique for membrane structures using geodesic line on subplane and spline interpolation

Practical techniques for smooth geodesic patterning of membrane structures were investigated.For the geodesic search,adjustment of the subplane of the extracted elements series was proposed,and various spline approximation methods were used to flatten the strip for the generation of a smooth pattern.This search approach is very simple,and the geodesic line could be easily attained by the proposed method without the need for a difficult computation method.Smooth cutting patterning can also be generated by spline approximation without the noise in discrete nodal information.Additionally,the geodesic cutting pattern saved about 21%of the required area for the catenary model due to the reduction of the curvature of the planar pattern seam line.