Water can be used as oxidant in conjunction with metal particles to form metal-water propellant to increase the energy of propellant.For this application,water needs to be stored in form of solid and capable of becomi...Water can be used as oxidant in conjunction with metal particles to form metal-water propellant to increase the energy of propellant.For this application,water needs to be stored in form of solid and capable of becoming liquid when use.Stable and thixotropic hydrogel has good potential as water-retaining material and oxidant of metal-based propellant.In this study,we prepared organic/inorganic composite hydrogels by combining inorganic gellants hectorite and fumed silica with organic gellant agarose,respectively.The total content of the gellants can be reduced to less than 2%by adding agarose.The influence of agarose on water content,phase transition temperature,centrifugal stability and other basic physical properties of composite hydrogels were discussed.The results show that the composite hydrogels have better thixotropy and stability than pure inorganic hydrogels,and the gel-sol transformation can be realized by applying shear force or heating to the phase transition temperature.The composite hydrogels have good shear thinning ability and improved mechanical stability.Fumed silica/agarose hydrogels have better physical stability,while the thixotropy and shear thinning ability of hectorite/agarose hydrogels are better.展开更多
The practical application of Li metal anodes(LMAs)is limited by uncontrolled dendrite growth and side reactions.Herein,we propose a new friction-induced strategy to produce high-performance thin Li anode(Li@CFO).By vi...The practical application of Li metal anodes(LMAs)is limited by uncontrolled dendrite growth and side reactions.Herein,we propose a new friction-induced strategy to produce high-performance thin Li anode(Li@CFO).By virtue of the in situ friction reaction between fluoropolymer grease and Li strips during rolling,a robust organic/inorganic hybrid interlayer(lithiophilic LiF/LiC_(6)framework hybridized-CF_(2)-O-CF_(2)-chains)was formed atop Li metal.The derived interface contributes to reversible Li plating/stripping behaviors by mitigating side reactions and decreasing the solvation degree at the interface.The Li@CFO||Li@CFO symmetrical cell exhibits a remarkable lifespan for 5,600 h(1.0 mA cm^(-2)and 1.0 mAh cm^(-2))and 1,350 cycles even at a harsh condition(18.0 mA cm^(-2)and 3.0 mAh cm^(-2)).When paired with high-loading LiFePO4 cathodes,the full cell lasts over 450 cycles at 1C with a high-capacity retention of 99.9%.This work provides a new friction-induced strategy for producing high-performance thin LMAs.展开更多
To solve the fire accidents caused by coal combustion,this work prepared four hybrid hydrogel materials using bio-based polymers,flame retardants,and inorganic materials.Compared to pure water and 3.5 wt%MgCl_(2)solut...To solve the fire accidents caused by coal combustion,this work prepared four hybrid hydrogel materials using bio-based polymers,flame retardants,and inorganic materials.Compared to pure water and 3.5 wt%MgCl_(2)solution,the as-prepared hydrogel presents good fire prevention performance.In addition,it is found that CO and CO_(2)are not produced by coal when the pyrolysis temperature is lower than 200℃.During low-temperature pyrolysis,CO is more likely to be produced than CO_(2),indicating inadequate pyrolysis behavior.At the same time,the addition of fire-preventing hydrogel can not only decrease the maximum CO_(2)concentration before the critical temperature but also prolong the corresponding time.In addition,based on the cone calorimeter test,the inhibition effects of pure water,magnesium chloride solution,and four hybrid hydrogels on heat release behavior are evaluated.It is demonstrated that different dosages of different hydrogels affected the fire prevention effect.Phosphorous-modified cellulose/silica and carrageenan/DMMP/vermiculite composite hydrogels have the weakest fire prevention effect at 20 g,which is weaker than that of water.However,the fire prevention effect of carrageenan/DMMP/vermiculite composite hydrogels exceeded that of water at 40 and 60 g.Additionally,the fire prevention effect of the sodium alginate/sepiolite/ammonium polyphosphate composite hydrogel is most significant in common tests,attributed to the intumescent flame retardant system.展开更多
Organic solar cells(OSCs)have gained conspicuous progress during the past few decades due to the development of materials and upgrading of the device structure.The power conversion efficiency(PCE)of the single-junctio...Organic solar cells(OSCs)have gained conspicuous progress during the past few decades due to the development of materials and upgrading of the device structure.The power conversion efficiency(PCE)of the single-junction device had surpassed 19%.The cathode interface layer(CIL),by optimizing the connection between the active layer and the cathode electrode,has become a momentous part to strengthen the performances of the OSCs.Simultaneously,CIL is also indispensable to illustrating the working mechanism of OSCs and enhancing the stability of the OSCs.In this essay,hybrid CILs in OSCs have been summarized.Firstly,the advancement and operating mechanism of OSCs,and the effects and relevant design rules of CIL are briefly concluded;secondly,the significant influence of CIL on enhancing the stability and PCE of OSCs is presented;thirdly,the characteristics of organic hybrid CIL and organic-inorganic hybrid CIL are introduced.Finally,the conclusion and outlook of CIL are summarized.展开更多
Two new organic-inorganic compounds [(CH2)5NH2]3[PMo12O40]·3[(CH2)NH] 1 and [(CH2)5NH2]6[P2Mo18O62]·5H2O 2 have been synthesized using conventional and hydrothermal methods, respectively, and character...Two new organic-inorganic compounds [(CH2)5NH2]3[PMo12O40]·3[(CH2)NH] 1 and [(CH2)5NH2]6[P2Mo18O62]·5H2O 2 have been synthesized using conventional and hydrothermal methods, respectively, and characterized by elemental analyses, IR, TG and single-crystal X-ray diffraction. X-ray analyses show that in these compounds heteropolymolybdates [PMo12O40]^3- and [P2Mo18O62]^6- are reserved their Keggin or Dawson structures and linked to piperidine through electrostatic and hydrogen-bonding interactions.展开更多
Polythiophene/WO3(PTP/WO3)organic-inorganic hybrids were synthesized by an in situ chemical oxidative polymerization method,and char- acterized by X-ray diffraction(XRD),transmission electron microscopy(TEM)and ...Polythiophene/WO3(PTP/WO3)organic-inorganic hybrids were synthesized by an in situ chemical oxidative polymerization method,and char- acterized by X-ray diffraction(XRD),transmission electron microscopy(TEM)and thermo-gravimetric analysis(TGA).The Polythiophene/ WO3 hybrids have higher thermal stability than pure polythiophene,which is beneficial to potential application as chemical sensors.Gas sensing measurements demonstrate that the gas sensor based on the Polythiophene/WO3 hybrids has high response and good selectivity for de- tecting NO2 of ppm level at low temperature.Both the operating temperature and PTP contents have an influence on the response of PTP/WO3 hybrids to NO2.The 10 wt%PTP/WO3 hybrid showed the highest response at low operating temperature of 70-C.It is expected that the PTP/WO3 hybrids can be potentially used as gas sensor material for detecting the low concentration of NO2 at low temperature.展开更多
Silicon containing materials have traditionally been used in microelectronic fabrication. Semiconductor devices often have one or more arrays of patterned interconnect levels that serve to electrically couple the indi...Silicon containing materials have traditionally been used in microelectronic fabrication. Semiconductor devices often have one or more arrays of patterned interconnect levels that serve to electrically couple the individual circuit elements forming an integrated circuit. These interconnect levels are typically separated by an insulating or dielectric film. Previously, a silicon oxide film was the most commonly used material for such dielectric films having dielectric constants( k ) near 4 0. However, as the feature size is continuously scaling down, the relatively high k of such silicon oxide films became inadequate to provide efficient electrical insulation. As such, there has been an increasing market demand for materials with even lower dielectric constant for Interlayer Dielectric(ILD) applications, yet retaining thermal and mechanical integrity. We wish to report here our investigations on the preparation of ultra low k ILD materials using a sacrificial approach whereby organic groups are burnt out to generate low k porous ORMOSIL films. We have been able to prepare a variety of organically modified silicone resins leading to highly microporous thin films, exhibiting ultra low k from 1 80 to 2 87, and good to high modulus, 1 5 to 5 5 GPa. Structure property influences on porosity, dielectric constant and modulus will be discussed.展开更多
After fast developing of single-junction perovskite solar cells and organic solar cells in the past 10 years,it is becoming harder and harder to improve their power conversion efficiencies.Tandem solar cells are recei...After fast developing of single-junction perovskite solar cells and organic solar cells in the past 10 years,it is becoming harder and harder to improve their power conversion efficiencies.Tandem solar cells are receiving more and more attention because they have much higher theoretical efficiency than single-junction solar cells.Good device performance has been achieved for perovskite/silicon and perovskite/perovskite tandem solar cells,including 2-terminal and 4-terminal structures.However,very few studies have been done about 4-terminal inorganic perovskite/organic tandem solar cells.In this work,semi-transparent inorganic perovskite solar cells and organic solar cells are used to fabricate 4-terminal inorganic perovskite/organic tandem solar cells,achieving a power conversion efficiency of 21.25%for the tandem cells with spin-coated perovskite layer.By using drop-coating instead of spin-coating to make the inorganic perovskite films,4-terminal tandem cells with an efficiency of 22.34%are made.The efficiency is higher than the reported 2-terminal and 4-terminal inorganic perovskite/organic tandem solar cells.In addition,equivalent 2-terminal tandem solar cells were fabricated by connecting the sub-cells in series.The stability of organic solar cells under continuous illumination is improved by using semi-transparent perovskite solar cells as filter.展开更多
For the further improvement of the power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs),the buried interface between the perovskite and the electron transport layer is crucial.However,it is ch...For the further improvement of the power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs),the buried interface between the perovskite and the electron transport layer is crucial.However,it is challenging to effectively optimize this interface as it is buried beneath the perovskite film.Herein,we have designed and synthesized a series of multifunctional organic-inorganic(OI)complexes as buried interfacial material to promote electron extraction,as well as the crystal growth of the perovskite.The OI complex with BF4−group not only eliminates oxygen vacancies on the SnO_(2) surface but also balances energy level alignment between SnO_(2) and perovskite,providing a favorable environment for charge carrier extraction.Moreover,OI complex with amine(−NH_(2))functional group can regulate the crystallization of the perovskite film via interaction with PbI2,resulting in highly crystallized perovskite film with large grains and low defect density.Consequently,with rational molecular design,the PSCs with optimal OI complex buried interface layer which contains both BF4−and−NH_(2) functional groups yield a champion device efficiency of 23.69%.More importantly,the resulting unencapsulated device performs excellent ambient stability,maintaining over 90%of its initial efficiency after 2000 h storage,and excellent light stability of 91.5%remaining PCE in the maximum power point tracking measurement(under continuous 100 mW cm−2 light illumination in N2 atmosphere)after 500 h.展开更多
Polyimide(PI)is a promising electronic packaging material,but it remains challenging to obtain an all-organic PI hybrid film with decreased dielectric constant and loss without modifying the monomer.Herein,a series of...Polyimide(PI)is a promising electronic packaging material,but it remains challenging to obtain an all-organic PI hybrid film with decreased dielectric constant and loss without modifying the monomer.Herein,a series of allorganic PI hybrid films were successfully prepared by introducing the covalent organic framework(COF),which could induce the formation of the cross-linking structure in the PI matrix.Due to the synergistic effects of the COF fillers and the cross-linking structure,the PI/COF hybrid film containing 2 wt%COF exhibited the lowest dielectric constant of 2.72 and the lowest dielectric loss(tanδ)of 0.0077 at 1 MHz.It is attributed to the intrinsic low dielectric constant of COF and a large number of mesopores within the PI.Besides,the cross-linking network of PI prevents the molecular chains from stacking and improves the fraction of free volume(FFV).The molecular dynamics simulation results are well consistent with the dielectric properties data.Furthermore,the PI/COF hybrid film with 5 wt%COF showed a significant enhancement in breakdown strength,which increased to 412.8 kV/mm as compared with pure PI.In addition,the PI/COF hybrid film achieve to reduce the dielectric constant and thermal expansion coefficient(CTE).It also exhibited excellent thermal,hydrophobicity,and mechanical performance.The all-organic PI/COF hybrid films have great commercial potential as next-generation electronic packaging materials.展开更多
Layered organic-inorganic hybrids(CnH2n+1NH3)2(CH3NH3)m-1PbmI3m+1 containing monolayer(m=1) and bilayer(m=2) perovsikte were synthesized by reactions in solution.The influences of the reactant ratio,solvent,...Layered organic-inorganic hybrids(CnH2n+1NH3)2(CH3NH3)m-1PbmI3m+1 containing monolayer(m=1) and bilayer(m=2) perovsikte were synthesized by reactions in solution.The influences of the reactant ratio,solvent,reaction temperature,and reaction time on the structures of the products were investigated.The structures and the properties of the hybrids were characterized using X-ray diffraction(XRD),scanning electron microscopy(SEM),and ultraviolet and visible(UV) absorption spectroscopy.The XRD patterns and the SEM images demonstrate that the pure bilayer perovskite hybrids are obtained.The UV-vis spectra indicate that the number of the inorganic perovskite layer(m) has greater impact on the band gap than the number of the carbon atoms(n).The band gap of bilayer hybrids(around 1.9 eV) is significantly less than that of monolayer hybrids(around 2.2 eV).展开更多
Layered organic-inorganic hybrids containing bilayer perovsikte (R-NH3)2(CH3NH3)Pb2I7 (where R=C12H25,C6H5C2H4) were synthesized by reactions in solution. The influences of the solvents and the reactant ratio on...Layered organic-inorganic hybrids containing bilayer perovsikte (R-NH3)2(CH3NH3)Pb2I7 (where R=C12H25,C6H5C2H4) were synthesized by reactions in solution. The influences of the solvents and the reactant ratio on the structures of the products were investigated. The structures and the properties of the hybrids were characterized using X-ray diffraction (XRD) and ultraviolet and visible (UV) adsorption spectra. For comparing with the bilayer perovskite hybrids in structure and band gap magnitude, the hybrids containing monolayer perovskite (R-NH3)2PbI4 were also synthesized and characterized. The results demonstrate that the thickness of inorganic layer has obvious effect on the tunneling magnitude of the band gap but the organic part can be micro actuator of band gap.展开更多
Octaphenylsilsesquioxane(OPhS) was prepared by a modifying method and a new core-shell nanocomposite, octa(2,4-dinitrophenyl)silsesquioxane, [(R_2PhSiO_ 1.5)_8, R=—NO_2, ODNPhS], was synthesized by nitration of OPh...Octaphenylsilsesquioxane(OPhS) was prepared by a modifying method and a new core-shell nanocomposite, octa(2,4-dinitrophenyl)silsesquioxane, [(R_2PhSiO_ 1.5)_8, R=—NO_2, ODNPhS], was synthesized by nitration of OPhS in a mixed acid solution of nitric and sulfuric acids at about 60 ℃. Their molecular structures were determined by DRIFTS, 1H NMR, 13C NMR spectra analysis. The thermal analysis shows that ODNPhS is an explosive that detonates at about 420 ℃.展开更多
A series of novel amphibious organic/inorganic hybrid proton exchange membranes with H3PO4 doped which could be used under both wet and dry conditions was prepared through a sol-gel process based on acrylated triethox...A series of novel amphibious organic/inorganic hybrid proton exchange membranes with H3PO4 doped which could be used under both wet and dry conditions was prepared through a sol-gel process based on acrylated triethoxysilane(A-TES) and benzyltetrazole-modified triethoxysilane(BT-TES).The dual-curing approach including UV-curing and thermal curing was used to obtain the crosslinked membranes.Polyethylene glycol(400) diacrylate(PEGDA) was used as an oligomer to form the polymeric matrix.The molecular structures of precursors were characterized by 1 H,13 C and 29 Si NMR spectra.The thermogravimetric analysis(TGA) results show that the membranes exhibit acceptable thermal stability for their application at above 200 oC.The differential scanning calorimeter(DSC) determination indicates that the crosslinked membranes with the mass ratios of below 1.6 of BT-TES to A-TES and the same mass of H3PO4 doped as that of A-TES possess the-T g s,and the lowest T g(-28.9 ℃) exists for the membrane with double mass of H3PO4 doped as well.The high proton conductivity in a range of 9.4―17.3 mS/cm with the corresponding water uptake of 19.1%―32.8% of the membranes was detected at 90 oC under wet conditions.Meanwhile,the proton conductivity in a dry environment for the membrane with a mass ratio of 2.4 of BT-TES to A-TES and double H3PO4 loading increases from 4.89×10-2 mS/cm at 30 ℃ to 25.7 mS/cm at 140 ℃.The excellent proton transport ability under both hydrous and anhydrous conditions demonstrates a potential application in the polymer electrolyte membrane fuel cells.展开更多
A poly (St-co-BA) latex was successfully synthesized by using an organic-inorganic hybrid compound (OIHC), an aliphatic carboxylate sodium/nano-silica composite, as the emulsifier, and investigated by particle size an...A poly (St-co-BA) latex was successfully synthesized by using an organic-inorganic hybrid compound (OIHC), an aliphatic carboxylate sodium/nano-silica composite, as the emulsifier, and investigated by particle size analyzer, transmission electron microscope (TEM), optical contact angle measurement (OCA) and dynamic mechanical analyzer (DMA). It was found that the protective agent, sodium polyacrylate (PA),could obviously improve the polymerization stability and the functional monomer, glycidyl methacrylate (GMA), could enhance the store stability of the latex. The particle size of poly(St-co-BA) latex decreased and then leveled off as OIHC content increased. TEM shows that the prepared polymers were a~:tually organic-inorganic nanocomposites, and these films have better waterproof property than those prepared by traditional poly(St-co-BA) latex or organic silicone modified poly(St-co-BA) latex. The nanocomposite polymer has much higher glass transition temperature than organic silicone modified poly(St-co-BA) polymer containing the same organic silicone content.展开更多
We investigated the effect of combining organic and inorganic fertilizers on the growth and yield of hybrid rice (Palethwe-1) in the dry and wet seasons of 2015. Four quantities of inorganic fertilizer were used in th...We investigated the effect of combining organic and inorganic fertilizers on the growth and yield of hybrid rice (Palethwe-1) in the dry and wet seasons of 2015. Four quantities of inorganic fertilizer were used in the main plot [0%, 50%, 75%, and 100% nitrogen, phosphorus, and potassium (NPK)] based on the recommended amounts of 150 kg N ha-1, 70 kg P2O5 ha-1, and 120 kg K2O ha-1, while different organic manures were applied to subplots [no organic manure (O0), cow manure (Oc), poultry manure (Op), and vermicompost (Ov);all at 5 t·ha-1] as part of a split-plot experimental design with three replicates. In both seasons, significant differences in growth parameters including number of tillers hill-1, soil-plant analysis development (SPAD) values, total dry matter, yield, and yield components were observed in plants supplied with different inorganic fertilizers. The 100% NPK (I100) fertilizer produced the maximum yield but similar yields were achieved in plots supplied with 50% NPK (I50) and 75% NPK (I75). Significant differences in growth and yield parameters were also found in crops supplied with organic manures. Although identical quantities were supplied, Op produced the best growth parameters in both seasons including total dry matter, yield, and yield components. Oc also performed well. Combining inorganic and organic fertilizers demonstrated that I50 together with Op (5 t·ha-1) provided similar growth, total dry matter, and yield parameters to I100 in both seasons. Oc (5 t·ha-1) plus I75 also achieved similar yields to I100. This study demonstrates that the combined application of inorganic fertilizers and organic manures has the potential to reduce chemical fertilizer usage without decreasing the yield of hybrid rice, and can enhance the growth, yield, and yield components of Palethwe-1.展开更多
A new bismuth(III) iodide inorganic/organic hybrid containing larger heterocyclic conjugated organic ligand, [(dppz)2Bi2I6]·2DMF (1) (dppz = dipyrido[3,2-a:2',3'-c]phenazine), has been synthesized by s...A new bismuth(III) iodide inorganic/organic hybrid containing larger heterocyclic conjugated organic ligand, [(dppz)2Bi2I6]·2DMF (1) (dppz = dipyrido[3,2-a:2',3'-c]phenazine), has been synthesized by solution process and structurally determined by X-ray diffraction method. 1 crystallizes in triclinic, space group Pī with Mr= 1844.08, α = 9.215(5), b = 11.488(6), c = 12.424(9) ?, α = 106.66(2), β = 90.84(2), γ = 92.34(2)°, V = 1258.5(13) ?3, Z = 1, Dc = 2.433 g/cm3, F(000) = 830, μ(MoKα) = 10.702 mm–1, the final R = 0.0834 and wR = 0.1947 for 2749 observed reflections with I 〉 2σ(I). 1 consists of a dimeric structure [(dppz)2Bi2I6], in which two [(dppz)BiI3] fragments are bridged by a pair of iodine atoms. Hydrogen bonds and π···π stacking interactions contribute to the structural extension and stabilization. Experimental band gap of about 2.13 eV indicates its semiconductor nature. The optical absorption spectrum and electronic structure were also discussed.展开更多
A unique ionic hybrid material[C_6H_(12)N_5O]_3[(PO_4)W__(12)O_(36)]·5H_2O has been synthesized from the reaction of((1H-tetrazole-5- yl)methyl)morpholine andα-H_3[(PO_4)W_(12)O_(36)]·21H_2O.It has successf...A unique ionic hybrid material[C_6H_(12)N_5O]_3[(PO_4)W__(12)O_(36)]·5H_2O has been synthesized from the reaction of((1H-tetrazole-5- yl)methyl)morpholine andα-H_3[(PO_4)W_(12)O_(36)]·21H_2O.It has successfully been characterized by elemental analysis,IR and ~1H NMR spectroscopies,TGA and single-crystal X-ray diffraction method.The title compound is constructed from the three [C_6H_(12)N_5O]^+ cations andα-Keggin[(PO_4)W_(12)O_(36)]^(3-) polyoxoanion.The most remarkable structural feature of this hybrid can...展开更多
This study aims to investigate the possibility of improving the flame Retardancy for the hybrid composite material consisting araldite resin (CY223). The hybrid composite was reinforced by hybrid fibers from carbon an...This study aims to investigate the possibility of improving the flame Retardancy for the hybrid composite material consisting araldite resin (CY223). The hybrid composite was reinforced by hybrid fibers from carbon and Kevlar fibers on woven roving form (45o -0o), by using a surface layer of 4mm thick of Zinc Borate flame retardant. Afterward, the structure was exposed directly to gas flame of 2000oC due to 10 mm and 20mm exposure interval. The retardant layer thermal resistance and protection capability were determined. The study was continued to improve the performance of Zinc Borate layer mixed by 10%, 20% and 30% of Antimony Trioxide. To determine the heat transfer of the composite material the opposite surface temperature method was used. Zinc Borate with (30%) Antimony Trioxide gives the optimized result of the experiment.展开更多
A novel organic-inorganic hybrid arsenatomolybdate based on infrequent[AsMoO(OH)]unit,[Cu ~I(phen)][AsMoO(OH)]·3HO(1,phen=1,10-phenanthroline),has been hydrothermally synthe-sized.This structure was determined by...A novel organic-inorganic hybrid arsenatomolybdate based on infrequent[AsMoO(OH)]unit,[Cu ~I(phen)][AsMoO(OH)]·3HO(1,phen=1,10-phenanthroline),has been hydrothermally synthe-sized.This structure was determined by single-crystal X-ray diffraction analysis,and further characterized by elemental analysis,and IR and UV spectra.To the best of our knowledge,it is the first report of a novel arsenatomolybdate subunit[AsMoO(OH)].Photoluminescence of 1 is ascribed to???*emission of the aromatic rings derived from the phen ligand.展开更多
基金the Haihe Laboratory of Sustainable Chemical Transformations for financial support。
文摘Water can be used as oxidant in conjunction with metal particles to form metal-water propellant to increase the energy of propellant.For this application,water needs to be stored in form of solid and capable of becoming liquid when use.Stable and thixotropic hydrogel has good potential as water-retaining material and oxidant of metal-based propellant.In this study,we prepared organic/inorganic composite hydrogels by combining inorganic gellants hectorite and fumed silica with organic gellant agarose,respectively.The total content of the gellants can be reduced to less than 2%by adding agarose.The influence of agarose on water content,phase transition temperature,centrifugal stability and other basic physical properties of composite hydrogels were discussed.The results show that the composite hydrogels have better thixotropy and stability than pure inorganic hydrogels,and the gel-sol transformation can be realized by applying shear force or heating to the phase transition temperature.The composite hydrogels have good shear thinning ability and improved mechanical stability.Fumed silica/agarose hydrogels have better physical stability,while the thixotropy and shear thinning ability of hectorite/agarose hydrogels are better.
基金This work was supported by the National Natural Science Foundation of China(U1904216 and U22A20141)the Natural Science Foundation of Changsha City(kq2208258).
文摘The practical application of Li metal anodes(LMAs)is limited by uncontrolled dendrite growth and side reactions.Herein,we propose a new friction-induced strategy to produce high-performance thin Li anode(Li@CFO).By virtue of the in situ friction reaction between fluoropolymer grease and Li strips during rolling,a robust organic/inorganic hybrid interlayer(lithiophilic LiF/LiC_(6)framework hybridized-CF_(2)-O-CF_(2)-chains)was formed atop Li metal.The derived interface contributes to reversible Li plating/stripping behaviors by mitigating side reactions and decreasing the solvation degree at the interface.The Li@CFO||Li@CFO symmetrical cell exhibits a remarkable lifespan for 5,600 h(1.0 mA cm^(-2)and 1.0 mAh cm^(-2))and 1,350 cycles even at a harsh condition(18.0 mA cm^(-2)and 3.0 mAh cm^(-2)).When paired with high-loading LiFePO4 cathodes,the full cell lasts over 450 cycles at 1C with a high-capacity retention of 99.9%.This work provides a new friction-induced strategy for producing high-performance thin LMAs.
基金the National Key Research and Development Program of China(Grant No.2017YFC0805900)the Fundamental Research Funds for the Central Universities(Grant No.WK2320000047)the USTC Research Funds of the Double First-Class Initiative(Grant No.YD2320002004).
文摘To solve the fire accidents caused by coal combustion,this work prepared four hybrid hydrogel materials using bio-based polymers,flame retardants,and inorganic materials.Compared to pure water and 3.5 wt%MgCl_(2)solution,the as-prepared hydrogel presents good fire prevention performance.In addition,it is found that CO and CO_(2)are not produced by coal when the pyrolysis temperature is lower than 200℃.During low-temperature pyrolysis,CO is more likely to be produced than CO_(2),indicating inadequate pyrolysis behavior.At the same time,the addition of fire-preventing hydrogel can not only decrease the maximum CO_(2)concentration before the critical temperature but also prolong the corresponding time.In addition,based on the cone calorimeter test,the inhibition effects of pure water,magnesium chloride solution,and four hybrid hydrogels on heat release behavior are evaluated.It is demonstrated that different dosages of different hydrogels affected the fire prevention effect.Phosphorous-modified cellulose/silica and carrageenan/DMMP/vermiculite composite hydrogels have the weakest fire prevention effect at 20 g,which is weaker than that of water.However,the fire prevention effect of carrageenan/DMMP/vermiculite composite hydrogels exceeded that of water at 40 and 60 g.Additionally,the fire prevention effect of the sodium alginate/sepiolite/ammonium polyphosphate composite hydrogel is most significant in common tests,attributed to the intumescent flame retardant system.
基金supported by the National Natural Science Foundation of China(52263017,21965023,52173170,51973087,and22065025)the Science Fund for Distinguished Young Scholars of Jiangxi Province(20212ACB214009)+2 种基金the Natural Science Foundation of Jiangxi Province(20212ACB203010,20224BAB214007 and20212BAB204052)the Training Project of High-level and Highskilled Leading Talents of Jiangxi Province(2023)the Thousand Talents Plan of Jiangxi Province(jxsq2019201004 and jxsq2020101068)。
文摘Organic solar cells(OSCs)have gained conspicuous progress during the past few decades due to the development of materials and upgrading of the device structure.The power conversion efficiency(PCE)of the single-junction device had surpassed 19%.The cathode interface layer(CIL),by optimizing the connection between the active layer and the cathode electrode,has become a momentous part to strengthen the performances of the OSCs.Simultaneously,CIL is also indispensable to illustrating the working mechanism of OSCs and enhancing the stability of the OSCs.In this essay,hybrid CILs in OSCs have been summarized.Firstly,the advancement and operating mechanism of OSCs,and the effects and relevant design rules of CIL are briefly concluded;secondly,the significant influence of CIL on enhancing the stability and PCE of OSCs is presented;thirdly,the characteristics of organic hybrid CIL and organic-inorganic hybrid CIL are introduced.Finally,the conclusion and outlook of CIL are summarized.
基金This project was financially supported by the National Science Foundation of China (No. 20371012)
文摘Two new organic-inorganic compounds [(CH2)5NH2]3[PMo12O40]·3[(CH2)NH] 1 and [(CH2)5NH2]6[P2Mo18O62]·5H2O 2 have been synthesized using conventional and hydrothermal methods, respectively, and characterized by elemental analyses, IR, TG and single-crystal X-ray diffraction. X-ray analyses show that in these compounds heteropolymolybdates [PMo12O40]^3- and [P2Mo18O62]^6- are reserved their Keggin or Dawson structures and linked to piperidine through electrostatic and hydrogen-bonding interactions.
基金financially supported by the National Natural Science Foundation of China(No.20871071)the Science and Technology Commission Foundation of Tianjin(No.09JCYBJC03600 and 10JCYBJC03900)
文摘Polythiophene/WO3(PTP/WO3)organic-inorganic hybrids were synthesized by an in situ chemical oxidative polymerization method,and char- acterized by X-ray diffraction(XRD),transmission electron microscopy(TEM)and thermo-gravimetric analysis(TGA).The Polythiophene/ WO3 hybrids have higher thermal stability than pure polythiophene,which is beneficial to potential application as chemical sensors.Gas sensing measurements demonstrate that the gas sensor based on the Polythiophene/WO3 hybrids has high response and good selectivity for de- tecting NO2 of ppm level at low temperature.Both the operating temperature and PTP contents have an influence on the response of PTP/WO3 hybrids to NO2.The 10 wt%PTP/WO3 hybrid showed the highest response at low operating temperature of 70-C.It is expected that the PTP/WO3 hybrids can be potentially used as gas sensor material for detecting the low concentration of NO2 at low temperature.
文摘Silicon containing materials have traditionally been used in microelectronic fabrication. Semiconductor devices often have one or more arrays of patterned interconnect levels that serve to electrically couple the individual circuit elements forming an integrated circuit. These interconnect levels are typically separated by an insulating or dielectric film. Previously, a silicon oxide film was the most commonly used material for such dielectric films having dielectric constants( k ) near 4 0. However, as the feature size is continuously scaling down, the relatively high k of such silicon oxide films became inadequate to provide efficient electrical insulation. As such, there has been an increasing market demand for materials with even lower dielectric constant for Interlayer Dielectric(ILD) applications, yet retaining thermal and mechanical integrity. We wish to report here our investigations on the preparation of ultra low k ILD materials using a sacrificial approach whereby organic groups are burnt out to generate low k porous ORMOSIL films. We have been able to prepare a variety of organically modified silicone resins leading to highly microporous thin films, exhibiting ultra low k from 1 80 to 2 87, and good to high modulus, 1 5 to 5 5 GPa. Structure property influences on porosity, dielectric constant and modulus will be discussed.
基金We thank the National Key Research and Development Program of China(2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)+1 种基金the National Natural Science Foundation of China(21961160720 and 52203217)the China Postdoctoral Science Foundation(2021M690805)for financial support.
文摘After fast developing of single-junction perovskite solar cells and organic solar cells in the past 10 years,it is becoming harder and harder to improve their power conversion efficiencies.Tandem solar cells are receiving more and more attention because they have much higher theoretical efficiency than single-junction solar cells.Good device performance has been achieved for perovskite/silicon and perovskite/perovskite tandem solar cells,including 2-terminal and 4-terminal structures.However,very few studies have been done about 4-terminal inorganic perovskite/organic tandem solar cells.In this work,semi-transparent inorganic perovskite solar cells and organic solar cells are used to fabricate 4-terminal inorganic perovskite/organic tandem solar cells,achieving a power conversion efficiency of 21.25%for the tandem cells with spin-coated perovskite layer.By using drop-coating instead of spin-coating to make the inorganic perovskite films,4-terminal tandem cells with an efficiency of 22.34%are made.The efficiency is higher than the reported 2-terminal and 4-terminal inorganic perovskite/organic tandem solar cells.In addition,equivalent 2-terminal tandem solar cells were fabricated by connecting the sub-cells in series.The stability of organic solar cells under continuous illumination is improved by using semi-transparent perovskite solar cells as filter.
基金The authors acknowledge the financial support from the Natural Science Foundation of China(Nos.21931002 and 22101123)the National Key Research and Development Program of China(2018YFB0704100)+4 种基金the Shenzhen Science and Technology Innovation Committee(no.JCYJ20200109140812302)the Leading talents of Guangdong province program(2016LJ06N507)the Guangdong Provincial Key Laboratory of Energy Materials for Electric Power(no.2018B030322001)the Guangdong Provincial Key Laboratory of Catalysis(no.2020B121201002)Outstanding Talents Training Fund in Shenzhen.
文摘For the further improvement of the power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs),the buried interface between the perovskite and the electron transport layer is crucial.However,it is challenging to effectively optimize this interface as it is buried beneath the perovskite film.Herein,we have designed and synthesized a series of multifunctional organic-inorganic(OI)complexes as buried interfacial material to promote electron extraction,as well as the crystal growth of the perovskite.The OI complex with BF4−group not only eliminates oxygen vacancies on the SnO_(2) surface but also balances energy level alignment between SnO_(2) and perovskite,providing a favorable environment for charge carrier extraction.Moreover,OI complex with amine(−NH_(2))functional group can regulate the crystallization of the perovskite film via interaction with PbI2,resulting in highly crystallized perovskite film with large grains and low defect density.Consequently,with rational molecular design,the PSCs with optimal OI complex buried interface layer which contains both BF4−and−NH_(2) functional groups yield a champion device efficiency of 23.69%.More importantly,the resulting unencapsulated device performs excellent ambient stability,maintaining over 90%of its initial efficiency after 2000 h storage,and excellent light stability of 91.5%remaining PCE in the maximum power point tracking measurement(under continuous 100 mW cm−2 light illumination in N2 atmosphere)after 500 h.
基金supported by National Natural Science Foundation of China(52103029 and 51903075).
文摘Polyimide(PI)is a promising electronic packaging material,but it remains challenging to obtain an all-organic PI hybrid film with decreased dielectric constant and loss without modifying the monomer.Herein,a series of allorganic PI hybrid films were successfully prepared by introducing the covalent organic framework(COF),which could induce the formation of the cross-linking structure in the PI matrix.Due to the synergistic effects of the COF fillers and the cross-linking structure,the PI/COF hybrid film containing 2 wt%COF exhibited the lowest dielectric constant of 2.72 and the lowest dielectric loss(tanδ)of 0.0077 at 1 MHz.It is attributed to the intrinsic low dielectric constant of COF and a large number of mesopores within the PI.Besides,the cross-linking network of PI prevents the molecular chains from stacking and improves the fraction of free volume(FFV).The molecular dynamics simulation results are well consistent with the dielectric properties data.Furthermore,the PI/COF hybrid film with 5 wt%COF showed a significant enhancement in breakdown strength,which increased to 412.8 kV/mm as compared with pure PI.In addition,the PI/COF hybrid film achieve to reduce the dielectric constant and thermal expansion coefficient(CTE).It also exhibited excellent thermal,hydrophobicity,and mechanical performance.The all-organic PI/COF hybrid films have great commercial potential as next-generation electronic packaging materials.
基金Funded by the National Natural Science Foundation of China(No.51372187)
文摘Layered organic-inorganic hybrids(CnH2n+1NH3)2(CH3NH3)m-1PbmI3m+1 containing monolayer(m=1) and bilayer(m=2) perovsikte were synthesized by reactions in solution.The influences of the reactant ratio,solvent,reaction temperature,and reaction time on the structures of the products were investigated.The structures and the properties of the hybrids were characterized using X-ray diffraction(XRD),scanning electron microscopy(SEM),and ultraviolet and visible(UV) absorption spectroscopy.The XRD patterns and the SEM images demonstrate that the pure bilayer perovskite hybrids are obtained.The UV-vis spectra indicate that the number of the inorganic perovskite layer(m) has greater impact on the band gap than the number of the carbon atoms(n).The band gap of bilayer hybrids(around 1.9 eV) is significantly less than that of monolayer hybrids(around 2.2 eV).
基金National Natural Science Foundation of China(No.50972113)
文摘Layered organic-inorganic hybrids containing bilayer perovsikte (R-NH3)2(CH3NH3)Pb2I7 (where R=C12H25,C6H5C2H4) were synthesized by reactions in solution. The influences of the solvents and the reactant ratio on the structures of the products were investigated. The structures and the properties of the hybrids were characterized using X-ray diffraction (XRD) and ultraviolet and visible (UV) adsorption spectra. For comparing with the bilayer perovskite hybrids in structure and band gap magnitude, the hybrids containing monolayer perovskite (R-NH3)2PbI4 were also synthesized and characterized. The results demonstrate that the thickness of inorganic layer has obvious effect on the tunneling magnitude of the band gap but the organic part can be micro actuator of band gap.
文摘Octaphenylsilsesquioxane(OPhS) was prepared by a modifying method and a new core-shell nanocomposite, octa(2,4-dinitrophenyl)silsesquioxane, [(R_2PhSiO_ 1.5)_8, R=—NO_2, ODNPhS], was synthesized by nitration of OPhS in a mixed acid solution of nitric and sulfuric acids at about 60 ℃. Their molecular structures were determined by DRIFTS, 1H NMR, 13C NMR spectra analysis. The thermal analysis shows that ODNPhS is an explosive that detonates at about 420 ℃.
基金Supported by the National Natural Science Foundation of China(No.50973100)
文摘A series of novel amphibious organic/inorganic hybrid proton exchange membranes with H3PO4 doped which could be used under both wet and dry conditions was prepared through a sol-gel process based on acrylated triethoxysilane(A-TES) and benzyltetrazole-modified triethoxysilane(BT-TES).The dual-curing approach including UV-curing and thermal curing was used to obtain the crosslinked membranes.Polyethylene glycol(400) diacrylate(PEGDA) was used as an oligomer to form the polymeric matrix.The molecular structures of precursors were characterized by 1 H,13 C and 29 Si NMR spectra.The thermogravimetric analysis(TGA) results show that the membranes exhibit acceptable thermal stability for their application at above 200 oC.The differential scanning calorimeter(DSC) determination indicates that the crosslinked membranes with the mass ratios of below 1.6 of BT-TES to A-TES and the same mass of H3PO4 doped as that of A-TES possess the-T g s,and the lowest T g(-28.9 ℃) exists for the membrane with double mass of H3PO4 doped as well.The high proton conductivity in a range of 9.4―17.3 mS/cm with the corresponding water uptake of 19.1%―32.8% of the membranes was detected at 90 oC under wet conditions.Meanwhile,the proton conductivity in a dry environment for the membrane with a mass ratio of 2.4 of BT-TES to A-TES and double H3PO4 loading increases from 4.89×10-2 mS/cm at 30 ℃ to 25.7 mS/cm at 140 ℃.The excellent proton transport ability under both hydrous and anhydrous conditions demonstrates a potential application in the polymer electrolyte membrane fuel cells.
基金Supported by the National "863" Project (No. 2001 AA 320206)and Shanghai Nano Special Foundation(No. 0120nm034).
文摘A poly (St-co-BA) latex was successfully synthesized by using an organic-inorganic hybrid compound (OIHC), an aliphatic carboxylate sodium/nano-silica composite, as the emulsifier, and investigated by particle size analyzer, transmission electron microscope (TEM), optical contact angle measurement (OCA) and dynamic mechanical analyzer (DMA). It was found that the protective agent, sodium polyacrylate (PA),could obviously improve the polymerization stability and the functional monomer, glycidyl methacrylate (GMA), could enhance the store stability of the latex. The particle size of poly(St-co-BA) latex decreased and then leveled off as OIHC content increased. TEM shows that the prepared polymers were a~:tually organic-inorganic nanocomposites, and these films have better waterproof property than those prepared by traditional poly(St-co-BA) latex or organic silicone modified poly(St-co-BA) latex. The nanocomposite polymer has much higher glass transition temperature than organic silicone modified poly(St-co-BA) polymer containing the same organic silicone content.
文摘We investigated the effect of combining organic and inorganic fertilizers on the growth and yield of hybrid rice (Palethwe-1) in the dry and wet seasons of 2015. Four quantities of inorganic fertilizer were used in the main plot [0%, 50%, 75%, and 100% nitrogen, phosphorus, and potassium (NPK)] based on the recommended amounts of 150 kg N ha-1, 70 kg P2O5 ha-1, and 120 kg K2O ha-1, while different organic manures were applied to subplots [no organic manure (O0), cow manure (Oc), poultry manure (Op), and vermicompost (Ov);all at 5 t·ha-1] as part of a split-plot experimental design with three replicates. In both seasons, significant differences in growth parameters including number of tillers hill-1, soil-plant analysis development (SPAD) values, total dry matter, yield, and yield components were observed in plants supplied with different inorganic fertilizers. The 100% NPK (I100) fertilizer produced the maximum yield but similar yields were achieved in plots supplied with 50% NPK (I50) and 75% NPK (I75). Significant differences in growth and yield parameters were also found in crops supplied with organic manures. Although identical quantities were supplied, Op produced the best growth parameters in both seasons including total dry matter, yield, and yield components. Oc also performed well. Combining inorganic and organic fertilizers demonstrated that I50 together with Op (5 t·ha-1) provided similar growth, total dry matter, and yield parameters to I100 in both seasons. Oc (5 t·ha-1) plus I75 also achieved similar yields to I100. This study demonstrates that the combined application of inorganic fertilizers and organic manures has the potential to reduce chemical fertilizer usage without decreasing the yield of hybrid rice, and can enhance the growth, yield, and yield components of Palethwe-1.
基金Supported by the National Science Foundation for Fostering Talents in Basic Research of the National Natural Science Foundation of China(No.J1103303)National Natural Science Foundation of China(No.21271043)
文摘A new bismuth(III) iodide inorganic/organic hybrid containing larger heterocyclic conjugated organic ligand, [(dppz)2Bi2I6]·2DMF (1) (dppz = dipyrido[3,2-a:2',3'-c]phenazine), has been synthesized by solution process and structurally determined by X-ray diffraction method. 1 crystallizes in triclinic, space group Pī with Mr= 1844.08, α = 9.215(5), b = 11.488(6), c = 12.424(9) ?, α = 106.66(2), β = 90.84(2), γ = 92.34(2)°, V = 1258.5(13) ?3, Z = 1, Dc = 2.433 g/cm3, F(000) = 830, μ(MoKα) = 10.702 mm–1, the final R = 0.0834 and wR = 0.1947 for 2749 observed reflections with I 〉 2σ(I). 1 consists of a dimeric structure [(dppz)2Bi2I6], in which two [(dppz)BiI3] fragments are bridged by a pair of iodine atoms. Hydrogen bonds and π···π stacking interactions contribute to the structural extension and stabilization. Experimental band gap of about 2.13 eV indicates its semiconductor nature. The optical absorption spectrum and electronic structure were also discussed.
文摘A unique ionic hybrid material[C_6H_(12)N_5O]_3[(PO_4)W__(12)O_(36)]·5H_2O has been synthesized from the reaction of((1H-tetrazole-5- yl)methyl)morpholine andα-H_3[(PO_4)W_(12)O_(36)]·21H_2O.It has successfully been characterized by elemental analysis,IR and ~1H NMR spectroscopies,TGA and single-crystal X-ray diffraction method.The title compound is constructed from the three [C_6H_(12)N_5O]^+ cations andα-Keggin[(PO_4)W_(12)O_(36)]^(3-) polyoxoanion.The most remarkable structural feature of this hybrid can...
文摘This study aims to investigate the possibility of improving the flame Retardancy for the hybrid composite material consisting araldite resin (CY223). The hybrid composite was reinforced by hybrid fibers from carbon and Kevlar fibers on woven roving form (45o -0o), by using a surface layer of 4mm thick of Zinc Borate flame retardant. Afterward, the structure was exposed directly to gas flame of 2000oC due to 10 mm and 20mm exposure interval. The retardant layer thermal resistance and protection capability were determined. The study was continued to improve the performance of Zinc Borate layer mixed by 10%, 20% and 30% of Antimony Trioxide. To determine the heat transfer of the composite material the opposite surface temperature method was used. Zinc Borate with (30%) Antimony Trioxide gives the optimized result of the experiment.
基金supported by the Foundation of Education Department of Henan Province(15A150037)
文摘A novel organic-inorganic hybrid arsenatomolybdate based on infrequent[AsMoO(OH)]unit,[Cu ~I(phen)][AsMoO(OH)]·3HO(1,phen=1,10-phenanthroline),has been hydrothermally synthe-sized.This structure was determined by single-crystal X-ray diffraction analysis,and further characterized by elemental analysis,and IR and UV spectra.To the best of our knowledge,it is the first report of a novel arsenatomolybdate subunit[AsMoO(OH)].Photoluminescence of 1 is ascribed to???*emission of the aromatic rings derived from the phen ligand.