Generally,layered Ni-rich cathode materials exhibit the morphology of polycrystalline secondary sphere composed of numerous primary particles.While the arrangement of primary particles plays a very important role in t...Generally,layered Ni-rich cathode materials exhibit the morphology of polycrystalline secondary sphere composed of numerous primary particles.While the arrangement of primary particles plays a very important role in the properties of Ni-rich cathodes.The disordered particle arrangement is harmful to the cyclic performance and structural stability,yet the fundamental understanding of disordered structure on the structural degradation behavior is unclarified.Herein,we have designed three kinds of LiNi_(0.83)Co_(0.06)Mn_(0.11)O_(2) cathode materials with different primary particle orientations by regulating the precursor coprecipitation process.Combining finite element simulation and in-situ characterization,the Li^(+)transport and structure evolution behaviors of different materials are unraveled.Specifically,the smooth Li^(+)diffusion minimizes the reaction heterogeneity,homogenizes the phase transition within grains,and mitigates the anisotropic microstructural change,thereby modulating the crack evolution behavior.Meanwhile,the optimized structure evolution ensures radial tight junctions of the primary particles,enabling enhanced Li^(+)diffusion during dynamic processes.Closed-loop bidirectional enhancement mechanism becomes critical for grain orientation regulation to stabilize the cyclic performance.This precursor engineering with particle orientation regulation provides the useful guidance for the structural design and feature enhancement of Ni-rich layered cathodes.展开更多
Strong anisotropic corrosion and mechanical properties caused by specimen orientations greatly limit the applications of wrought magnesium alloys.To investigate the influences of specimen orientation,the corrosion tes...Strong anisotropic corrosion and mechanical properties caused by specimen orientations greatly limit the applications of wrought magnesium alloys.To investigate the influences of specimen orientation,the corrosion tests and(corrosion)fatigue crack growth tests were conducted.The rolled and transverse surfaces of the materials show distinct corrosion rate differences in the stable corrosion stage,but the truth is the opposite for the initial stage of corrosion.In air,specimen orientations have a significant influence on the plastic deformation mechanisms near the crack tip,which results in different fatigue fracture surfaces and cracking paths.Compared with R-T specimens,N-T specimens show a slower fatigue crack growth(FCG)rate in air,which can be attributed to crack closure effects and deformation twinning near the crack tip.The corrosion environment will not significantly change the main plastic deformation mechanisms for the same type of specimen.However,the FCG rate in phosphate buffer saline(PBS)is one order of magnitude higher than that in air,which is caused by the combined effects of hydrogen-induced cracking and anodic dissolution.Owing to the similar corrosion rates at crack tips,the specimens with different orientations display close FCG rates in PBS.展开更多
This review explores entrepreneurial orientation and innovation ecosystems in the industrial sector of the Central Region, Kampala, Uganda, through an analysis of ten scholarly articles. The study contextualizes the r...This review explores entrepreneurial orientation and innovation ecosystems in the industrial sector of the Central Region, Kampala, Uganda, through an analysis of ten scholarly articles. The study contextualizes the research within the regional landscape and establishes a theoretical framework through a focused literature review. Key findings highlight the intersection of entrepreneurial activities and innovation dynamics, emphasizing the region’s unique contributions to the broader field. Discussions on discrepancies and unexplored territories within the articles offer insights into limitations and research gaps. The manuscript concludes by identifying future research avenues, providing a roadmap for ongoing inquiry into the entrepreneurial and innovative dimensions of the Central Region’s industrial sector. This synthesis underscores the importance of cultivating an entrepreneurial mindset and collaborative innovation strategies for sustainable industrial development in the region.展开更多
Climate change and extreme weather pose significant challenges to the traditional viticulture regions.Emerging high-altitude grape-producing regions with diverse orientations have shown great potential in coping with ...Climate change and extreme weather pose significant challenges to the traditional viticulture regions.Emerging high-altitude grape-producing regions with diverse orientations have shown great potential in coping with this challenge.Stable,high-quality wine grape production may be achieved by synchronizing the meso-and microclimate.To clarify the role of high altitude and row orientation in meso-and microclimate and the response of berries to it,we evaluated seven years(2012-2018)of climate data,two years of basic grape(Cabernet Sauvignon,Vitis vinifera L.)quality,and one-year microclimate from veraison to harvest.By comparing two locations(Sidon 2047 m,Sinon 2208 m)in Yunnan Province,China,we found that the average temperature has been stable at approximately 15℃ for seven years,with no extreme weather or,noticeable global warming.The light intensity(LI)in the north-south(NS)was more balanced than the east-west(EW)direction,and the east-west to the south(EW-S)canopy side was almost higher than the other sides.High LI was associated with high photosynthetically active radiation(PAR),ultraviolet(UV),and infrared(IR)light and vice versa.The north-south to the east(NS-E)and east-west to the north(EWN)sides were characterized by lower LI and higher UV and IR light,and higher total anthocyanin content.Most anthocyanin synthesis-related genes,for example,VvF3'H and VvF3'5'H,were highly expressed in NS-E from veraison to maturity.Perhaps UV and IR light induced their expression.This study provides new insights on the role of differently orientated rows in controlling grape quality due to varied light quality.The findings are globally significant,particularly in the context of climate change,and offer fresh insights into berry physiological responses and decision-making for the management of existing vineyards.展开更多
To make the problems of existing high requirements of calibration tools, complex global calibration process addressed for monocular multi-view visual measurement system during measurement, in the paper, a global calib...To make the problems of existing high requirements of calibration tools, complex global calibration process addressed for monocular multi-view visual measurement system during measurement, in the paper, a global calibration method is proposed for the geometric properties of rotational correlation motion and the absolute orientation of the field of view without over lap. Firstly, a dual-camera system is constructed for photographing and collecting the rotating image sequence of two flat targets rigidly connected by a long rod at different positions, and based on the known parameters, such as, target feature image, world coordinates, camera internal parameters and so on, then the global PnP optimization method is used to solve the rotation axis and the reference point at different positions;Then, the absolute orientation matrix is constructed based on the parameters of rotation axis, reference point and connecting rod length obtained by this method. In the end, the singular value decomposition method is used to find the optimal rotation matrix, and then get the translation matrix. It’s shown based on simulation and actual tests that in comparison with the existing methods, the maximum attitude and pose errors is 0.0083˚ and 0.3657 mm, respectively, which improves the accuracy by 27.8% and 24.4%, respectively. The calibration device in this paper is simple, and there are no parallel, vertical and coplanar requirements between multiple rotating positions. At the same time, in view of the calibration accuracy, the accuracy requirements of most application scenarios can be met.展开更多
An optimized workspace calculation method is proposed for parallel stabilized platform testing systems.This method refines the searched space progressively in order to approach the boundary of the workspace from both ...An optimized workspace calculation method is proposed for parallel stabilized platform testing systems.This method refines the searched space progressively in order to approach the boundary of the workspace from both the inside and the outside of it.The orientation density is defined and used as an evaluation index to calculate the orientation workspace.The algorithm of the orientation density is embedded into the computer program of the workspace calculation.Then the workspaces of the testing system are solved.In the solution,the orientation density is regarded as a discrete function of the reachable workspace.As a result,the reachable workspace and the orientation workspace are represented in the same multidimensional graphs.Finally the useful workspace of the testing system is determined based on these results.This case study indicates that the calculation efficiency is enhanced by adopting the optimized method and the practicability of workspace study is improved by proposing the orientation density.展开更多
Unconventional resources like shale gas has been the focus of intense research and development for two decades. Apart from intrinsic geologic factors that control the gas shale productivity (e.g. organic matter conten...Unconventional resources like shale gas has been the focus of intense research and development for two decades. Apart from intrinsic geologic factors that control the gas shale productivity (e.g. organic matter content, bedding planes, natural fractures, porosity and stress regime among others), external factors like wellbore orientation and stimulation design play a role. In this study, we present a series of true triaxial hydraulic fracturing experiments conducted on Lushan shale to investigate the interplay of internal factors (bedding, natural fractures and in situ stress) and external factors (wellbore orientation) on the growth process of fracture networks in cubic specimens of 200 mm in length. We observe relatively low breakdown pressure and fracture propagation pressure as the wellbore orientation and/or the maximum in situ stress is subparallel to the shale bedding plane. The wellbore orientation has a more prominent effect on the breakdown pressure, but its effect is tapered with increasing angle of bedding inclination. The shale breakdown is followed by an abrupt response in sample displacement, which reflects the stimulated fracture volume. Based on fluid tracer analysis, the morphology of hydraulic fractures (HF) is divided into four categories. Among the categories, activation of bedding planes (bedding failure, BF) and natural fractures (NF) significantly increase bifurcation and fractured areas. Under the same stress regime, a horizontal wellbore is more favorable to enhance the complexity of hydraulic fracture networks. This is attributed to the relatively large surface area in contact with the bedding plane for the horizontal borehole compared to the case with a vertical wellbore. These findings provide important references for hydraulic fracturing design in shale reservoirs.展开更多
The basic scheme of the orientation detection system using L-shape reticle is introduced. The dimension of the patterns on the reticle of the system in practical applications is designed and an analysis of the princip...The basic scheme of the orientation detection system using L-shape reticle is introduced. The dimension of the patterns on the reticle of the system in practical applications is designed and an analysis of the principle of abstracting the orientation information of the target and the effects and formation method of self-adapting tracking gate is presented. The research result shows that the orientation detection system using L-shape reticle has a good effect on space-filtering, the signals that the orientation detection system sends out are easy to be processed by computer, its self-adapting tracking gate has a strong anti-interference ability, and the whole system's searching and tracking performances are quite high.展开更多
In Zimbabwe sweet potato (Ipomoea batatas L.) production is practiced under different tillage systems with varying vine orientations, which contribute to variable yields. Limited research on yield loss due to these di...In Zimbabwe sweet potato (Ipomoea batatas L.) production is practiced under different tillage systems with varying vine orientations, which contribute to variable yields. Limited research on yield loss due to these different practices is available despite that the majority of farmers are growing sweet potatoes to sustain their livelihoods. A field study was carried out at Midlands State University in the 2013/14 rainy season, to determine the effect of tillage systems and vine orientation on yield of sweet potato. A 2 × 3 factorial treatment structure in a randomized complete block design (RCBD), with three replications was used. Tillage systems had two factors (ridge and mound) and three vine orientations were used (horizontal, fold and loop). Data on storage root length, storage root diameter and storage root weight was subjected to Analysis of Variance (ANOVA) at 5% significance level. There was no interaction (p < 0.05) between tillage systems and vine orientations on storage root diameter, storage root length and storage root yield. The horizontal vine orientation gave statistically significant (p < 0.05) storage roots diameter of width 405 mm. Conversely the loop vine orientation had statistically the least (316 mm) storage root diameter. Horizontal vine orientation had significantly (p < 0.05) wider storage roots than the loop vine orientation. The ridge recorded longer (134.2 mm) mean storage root length, while those from mounds had shorter (115.9 mm) root length. The loop and the horizontal vine orientations recorded statistically the highest (35.5 t/ha and 34.8 t/ha respectively) sweet potato storage root yield. On the other hand, the fold vine orientation obtained significantly the lowest (28.7 t/ha) storage root yield. The research concluded that the horizontal and fold vine orientations had the widest storage root diameter and the ridge had longer storage root lengths. The loop and horizontal vine orientations are recommended in sweet potato production if high yields are to be achieved.展开更多
In consideration of the present conditions of telecom service providers in China,the objectives and possible processes of con- structing telecom resource management systems(RMS)in China are analyzed.The system boundar...In consideration of the present conditions of telecom service providers in China,the objectives and possible processes of con- structing telecom resource management systems(RMS)in China are analyzed.The system boundary with other network manage- ment systems and the interface protocols are discussed.It is sug- gested that the telecom resource management system should be constructed in a proper sequence and developed in different stages.展开更多
Euler’s rotation theorem and tensor rotation technique are applied to develop a generalized mathematical model for determining photoelastic constants in arbitrary orientation of cubic crystal system. Two times rotati...Euler’s rotation theorem and tensor rotation technique are applied to develop a generalized mathematical model for determining photoelastic constants in arbitrary orientation of cubic crystal system. Two times rotations are utilized in the model relating to crystallographic coordinates with Cartesian coordinates. The symmetry of photoelastic constants is found to have strong dependence with rotation angle. Using the model, one can determine photoelastic constants in any orientation by selecting appropriate rotation angle. The outcome of this study helps to characterize spatial variation of residual strain in crystalline as well as polycrystalline materials having cubic structure using the experimental technique known as scanning infrared polariscope.展开更多
The blast-induced ground vibrations can be significantly controlled by varying the location and orien-tation of point of interest from blast site.The blast waves generated due to individual holes get super-imposed and...The blast-induced ground vibrations can be significantly controlled by varying the location and orien-tation of point of interest from blast site.The blast waves generated due to individual holes get super-imposed and resultant peak particle velocity(PPV)generates.With the orientation sequence of holes blasts on site,the superimposition angle of wave changes and hence results in significant variation in resultant PPV.The orientation with respect to the initiation of blasts resulting in lowest PPV needs to be identified for any site.By knowing the PPV contour of vibration waves in mine sites,it is possible to reduce the vibration on the structures by changing the initiation sequence.In this paper,experimental blasts were conducted at two different mine sites and the PPV values were recorded at different ori-entations from the blast site and its initiation sequence.The PPV contours were drawn to identify the orientation with least and highest PPV generation line.It was found that by merely changing the initi-ation sequence of blasts with respect to the sensitive structure or point of interest,the PPV values can be reduced significantly up to 76.9%.展开更多
Collagen provides tissue strength and structural integrity.Quanti fication of the orientated dispersion of collagen fibers is an important factor when studying the mechanical properties of the cervix.In this study,for...Collagen provides tissue strength and structural integrity.Quanti fication of the orientated dispersion of collagen fibers is an important factor when studying the mechanical properties of the cervix.In this study,for the first time,a new method for rapid characterization of the collagen fiber orientations of the cervix using linearly polarized light colposcopy is presented.A total of 24 colposcopic images were captured using a cross-polarized imaging system with white LED light sources.In the preprocessing stage,the Red channel of the RGB image was chosen,which contains no information of the blood vessels because of the low-absorption of blood cells in the red region.OrientationJ,which is an ImageJ plug-in,was used to estimate the local orientation of the collagen fibers.The result shows that in the nonpregnant cervix,the middle zone(Zone 2)has circumferentially aligned collagen fibers while the inner zone(Zone 1)has randomly arranged.The collagen fiber dispersion in Zone 2 is much smaller than that in Zone 1 at all four quadrants region(anterior,posterior,left,and right quadrant).This new analysis technique could potentially combine with diagnostic tools to provide a quantitative platform of collagen fibers in the clinic.展开更多
The degree of polymer chain orientation is a key structural parameter that determines the mechanical and physical properties of fibers.However,understanding and significantly tuning the orientation of fiber macromolec...The degree of polymer chain orientation is a key structural parameter that determines the mechanical and physical properties of fibers.However,understanding and significantly tuning the orientation of fiber macromolecular chains remain elusive.Herein,we propose a novel electrospinning technique that can efficiently modulate molecular chain orientation by controlling the electric field.In contrast to the typical electrospinning method,this technique can piecewise control the electric field by applying high voltage to the metal ring instead of the needle.Benefiting from this change,a new electric field distribution can be realized,leading to a non-monotonic change in the drafting force.As a result,the macromolecular chain orientation of polyethylene oxide(PEO)nanofibers was significantly improved with a recordhigh infrared dichroic ratio.This was further confirmed by the sharp decrease in the PEO jet fineness of approximately 80%and the nanofiber diameter from 298 to 114 nm.Interestingly,the crystallinity can also be adjusted,with an obvious drop from 74.9%to 31.7%,which is different from the high crystallinity caused by oriented chains in common materials.This work guides a new perspective for the preparation of advanced electrospun nanofibers with optimal orientation–crystallinity properties,a merited feature for various applications.展开更多
In this paper,DOA and subarray-interval estimation are considered and applied to arbitrarily distributed unmanned aerial vehicle(UAV)swarm system,in which multiple small UAVs containing uniform linear array(ULA)are di...In this paper,DOA and subarray-interval estimation are considered and applied to arbitrarily distributed unmanned aerial vehicle(UAV)swarm system,in which multiple small UAVs containing uniform linear array(ULA)are divided by unknown intervals because of dynamic moving.Three parameters are taken to indicate the steering vector,namely,the direction of arrivals(DOAs)of target users,the intervals of UAVs,and the orientation angles of UAVs.The orientation angles are first estimated with an auxiliary user and the DOAs are obtained through a search free rooting method,despite the intervals among the UAVs.Afterwards,the intervals among UAVs can also be calculated via exhaustive when the number of target users are no less than three.We further develop a low-complex method to reduce the computational complexity during subarray-interval estimation.The deterministic Cramér-Rao bound(CRB)of the DOA,orientation angle and subarray-interval can be inferred in a closed form.Eventually,numerical instances are cited to verify the research results.展开更多
With the rapid rise in perovskite solar cells(PSCs)performance,it is imperative to develop scalable fabrication techniques to accelerate potential commercialization.However,the power conversion efficiencies(PCEs)of PS...With the rapid rise in perovskite solar cells(PSCs)performance,it is imperative to develop scalable fabrication techniques to accelerate potential commercialization.However,the power conversion efficiencies(PCEs)of PSCs fabricated via scalable two-step sequential deposition lag far behind the state-of-the-art spin-coated ones.Herein,the additive methylammonium chloride(MACl)is introduced to modulate the crystallization and orientation of a two-step sequential doctorbladed perovskite film in ambient conditions.MACl can significantly improve perovskite film quality and increase grain size and crystallinity,thus decreasing trap density and suppressing nonradiative recombination.Meanwhile,MACl also promotes the preferred face-up orientation of the(100)plane of perovskite film,which is more conducive to the transport and collection of carriers,thereby significantly improving the fill factor.As a result,a champion PCE of 23.14%and excellent longterm stability are achieved for PSCs based on the structure of ITO/SnO_(2)/FA_(1-x)MA_xPb(I_(1-y)Br_y)_3/Spiro-OMeTAD/Ag.The superior PCEs of 21.20%and 17.54%are achieved for 1.03 cm~2 PSC and 10.93 cm~2 mini-module,respectively.These results represent substantial progress in large-scale two-step sequential deposition of high-performance PSCs for practical applications.展开更多
The crystal plasticity finite element method(CPFEM)is widely used to explore the microscopic mechanical behavior of materials and understand the deformation mechanism at the grain-level.However,few CPFEM simulation st...The crystal plasticity finite element method(CPFEM)is widely used to explore the microscopic mechanical behavior of materials and understand the deformation mechanism at the grain-level.However,few CPFEM simulation studies have been carried out to analyze the nanoindentation deformation mechanism of polycrystalline materials at the microscale level.In this study,a three-dimensional CPFEM-based nanoindentation simulation is performed on an Inconel 718 polycrystalline material to examine the influence of different crystallographic parameters on nanoindentation behavior.A representative volume element model is developed to calibrate the crystal plastic constitutive parameters by comparing the stress-strain data with the experimental results.The indentation force-displacement curves,stress distributions,and pile-up patterns are obtained by CPFEM simulation.The results show that the crystallographic orientation and grain boundary have little influence on the force-displacement curves of the nanoindentation,but significantly influence the local stress distributions and shape of the pile-up patterns.As the difference in crystallographic orientation between grains increases,changes in the pile-up patterns and stress distributions caused by this effect become more significant.In addition,the simulation results reveal that the existence of grain boundaries affects the continuity of the stress distribution.The obstruction on the continuity of stress distribution increases as the grain boundary angle increases.This research demonstrates that the proposed CPFEM model can well describe the microscopic compressive deformation behaviors of Inconel 718 under nanoindentation.展开更多
The propagation mechanism of microcracks in nanocrystalline single crystal systems under uniaxial dynamic and static tension is investigated using the phase-field-crystal method.Both dynamic and static stretching resu...The propagation mechanism of microcracks in nanocrystalline single crystal systems under uniaxial dynamic and static tension is investigated using the phase-field-crystal method.Both dynamic and static stretching results show that different orientation angles can induce the crack propagation mode,microscopic morphology,the free energy,crack area change,and causing fracture failure.Crack propagation mode depends on the dislocation activity near the crack tip.Brittle propagation of the crack occurs due to dislocation always at crack tip.Dislocation is emitted at the front end of the crack tip and plastic deformation occurs,which belongs to ductile propagation.The orientation angles of 9°and 14°are brittleductile mixed propagation,while the orientation angles of 19°and 30°are brittle propagation and no dislocation is formed under dynamic tension.The vacancy and vacancy connectivity phenomenon would appear when the orientation angle is14°under static tension,and the crack would be ductile propagation.While the orientation angle is 19°and 30°,the crack propagates in a certain direction,which is a kind of brittle propagation.This work has some practical significance in preventing material fracture failure and improving material performance.展开更多
Although the non-basal precipitates, those not parallel to the basal plane, are more effective to block basal slip in Mg-Al alloys, the crystallographic orientation relationship(OR) between these precipitates and the ...Although the non-basal precipitates, those not parallel to the basal plane, are more effective to block basal slip in Mg-Al alloys, the crystallographic orientation relationship(OR) between these precipitates and the α-Mg matrix has not been well established. In this work, the crystallography of the non-basal Mg_(17)Al_(12) precipitates in AZ80 alloy was systematically investigated by transmission electron microscopy(TEM). By tilting to a suitable electron beam direction, different kinds of non-basal precipitates were recognized in TEM, and the following four new ORs between the non-basal Mg_(17)Al_(12) precipitates and the matrix were revealed: ■, and ■.Furthermore, these ORs and their habit planes were explained using the edge-to-edge matching model. The findings in this work can provide some guidelines for designing the microstructure of Mg-Al alloys to enhance their precipitation hardening potential.展开更多
Smartphones are usually packed with a large number of features.An increasing number of researchers are paying attention to the technological capabilities of smartphones,which is a new topic and research interest.This ...Smartphones are usually packed with a large number of features.An increasing number of researchers are paying attention to the technological capabilities of smartphones,which is a new topic and research interest.This paper proposes a method using smartphones and digital photogrammetry to measure the discontinuity orientation of a rock mass.Smartphone photos satisfying a certain overlap rate provide an efficient method for generating point cloud models of rock outcrops based on image matching.Using the target and the generated point cloud model allows for determining actual geographic coordinates and the measurement of discontinuity orientations.The method proposed has been applied to two different study areas.The discontinuity orientations measured by the proposed method are compared with those measured by the manual method in two cases.The results show a good agreement,verifying the reliability and accuracy of the proposed method.The main contribution of this paper is to use knowledge of coordinate rotation to determine the actual geographic location of the model through a square target.The equipment used in this study is simple,and photogrammetric field surveys are easy to carry out.展开更多
基金supported by National Natural Science Foundation of China (52070194,52073309)Natural Science Foundation of Hunan Province (2022JJ20069)。
文摘Generally,layered Ni-rich cathode materials exhibit the morphology of polycrystalline secondary sphere composed of numerous primary particles.While the arrangement of primary particles plays a very important role in the properties of Ni-rich cathodes.The disordered particle arrangement is harmful to the cyclic performance and structural stability,yet the fundamental understanding of disordered structure on the structural degradation behavior is unclarified.Herein,we have designed three kinds of LiNi_(0.83)Co_(0.06)Mn_(0.11)O_(2) cathode materials with different primary particle orientations by regulating the precursor coprecipitation process.Combining finite element simulation and in-situ characterization,the Li^(+)transport and structure evolution behaviors of different materials are unraveled.Specifically,the smooth Li^(+)diffusion minimizes the reaction heterogeneity,homogenizes the phase transition within grains,and mitigates the anisotropic microstructural change,thereby modulating the crack evolution behavior.Meanwhile,the optimized structure evolution ensures radial tight junctions of the primary particles,enabling enhanced Li^(+)diffusion during dynamic processes.Closed-loop bidirectional enhancement mechanism becomes critical for grain orientation regulation to stabilize the cyclic performance.This precursor engineering with particle orientation regulation provides the useful guidance for the structural design and feature enhancement of Ni-rich layered cathodes.
基金the National Natural Science Foundation of China(Nos.52175143 and 51571150)。
文摘Strong anisotropic corrosion and mechanical properties caused by specimen orientations greatly limit the applications of wrought magnesium alloys.To investigate the influences of specimen orientation,the corrosion tests and(corrosion)fatigue crack growth tests were conducted.The rolled and transverse surfaces of the materials show distinct corrosion rate differences in the stable corrosion stage,but the truth is the opposite for the initial stage of corrosion.In air,specimen orientations have a significant influence on the plastic deformation mechanisms near the crack tip,which results in different fatigue fracture surfaces and cracking paths.Compared with R-T specimens,N-T specimens show a slower fatigue crack growth(FCG)rate in air,which can be attributed to crack closure effects and deformation twinning near the crack tip.The corrosion environment will not significantly change the main plastic deformation mechanisms for the same type of specimen.However,the FCG rate in phosphate buffer saline(PBS)is one order of magnitude higher than that in air,which is caused by the combined effects of hydrogen-induced cracking and anodic dissolution.Owing to the similar corrosion rates at crack tips,the specimens with different orientations display close FCG rates in PBS.
文摘This review explores entrepreneurial orientation and innovation ecosystems in the industrial sector of the Central Region, Kampala, Uganda, through an analysis of ten scholarly articles. The study contextualizes the research within the regional landscape and establishes a theoretical framework through a focused literature review. Key findings highlight the intersection of entrepreneurial activities and innovation dynamics, emphasizing the region’s unique contributions to the broader field. Discussions on discrepancies and unexplored territories within the articles offer insights into limitations and research gaps. The manuscript concludes by identifying future research avenues, providing a roadmap for ongoing inquiry into the entrepreneurial and innovative dimensions of the Central Region’s industrial sector. This synthesis underscores the importance of cultivating an entrepreneurial mindset and collaborative innovation strategies for sustainable industrial development in the region.
基金supported by the National Natural Science Foundation of China(Grant No.31772258)the National Key Research and Development Program(Grant No.2019YFD1000102-11)。
文摘Climate change and extreme weather pose significant challenges to the traditional viticulture regions.Emerging high-altitude grape-producing regions with diverse orientations have shown great potential in coping with this challenge.Stable,high-quality wine grape production may be achieved by synchronizing the meso-and microclimate.To clarify the role of high altitude and row orientation in meso-and microclimate and the response of berries to it,we evaluated seven years(2012-2018)of climate data,two years of basic grape(Cabernet Sauvignon,Vitis vinifera L.)quality,and one-year microclimate from veraison to harvest.By comparing two locations(Sidon 2047 m,Sinon 2208 m)in Yunnan Province,China,we found that the average temperature has been stable at approximately 15℃ for seven years,with no extreme weather or,noticeable global warming.The light intensity(LI)in the north-south(NS)was more balanced than the east-west(EW)direction,and the east-west to the south(EW-S)canopy side was almost higher than the other sides.High LI was associated with high photosynthetically active radiation(PAR),ultraviolet(UV),and infrared(IR)light and vice versa.The north-south to the east(NS-E)and east-west to the north(EWN)sides were characterized by lower LI and higher UV and IR light,and higher total anthocyanin content.Most anthocyanin synthesis-related genes,for example,VvF3'H and VvF3'5'H,were highly expressed in NS-E from veraison to maturity.Perhaps UV and IR light induced their expression.This study provides new insights on the role of differently orientated rows in controlling grape quality due to varied light quality.The findings are globally significant,particularly in the context of climate change,and offer fresh insights into berry physiological responses and decision-making for the management of existing vineyards.
文摘To make the problems of existing high requirements of calibration tools, complex global calibration process addressed for monocular multi-view visual measurement system during measurement, in the paper, a global calibration method is proposed for the geometric properties of rotational correlation motion and the absolute orientation of the field of view without over lap. Firstly, a dual-camera system is constructed for photographing and collecting the rotating image sequence of two flat targets rigidly connected by a long rod at different positions, and based on the known parameters, such as, target feature image, world coordinates, camera internal parameters and so on, then the global PnP optimization method is used to solve the rotation axis and the reference point at different positions;Then, the absolute orientation matrix is constructed based on the parameters of rotation axis, reference point and connecting rod length obtained by this method. In the end, the singular value decomposition method is used to find the optimal rotation matrix, and then get the translation matrix. It’s shown based on simulation and actual tests that in comparison with the existing methods, the maximum attitude and pose errors is 0.0083˚ and 0.3657 mm, respectively, which improves the accuracy by 27.8% and 24.4%, respectively. The calibration device in this paper is simple, and there are no parallel, vertical and coplanar requirements between multiple rotating positions. At the same time, in view of the calibration accuracy, the accuracy requirements of most application scenarios can be met.
基金Supported by the Ministerial Level Advanced Research Foundation (870102056)
文摘An optimized workspace calculation method is proposed for parallel stabilized platform testing systems.This method refines the searched space progressively in order to approach the boundary of the workspace from both the inside and the outside of it.The orientation density is defined and used as an evaluation index to calculate the orientation workspace.The algorithm of the orientation density is embedded into the computer program of the workspace calculation.Then the workspaces of the testing system are solved.In the solution,the orientation density is regarded as a discrete function of the reachable workspace.As a result,the reachable workspace and the orientation workspace are represented in the same multidimensional graphs.Finally the useful workspace of the testing system is determined based on these results.This case study indicates that the calculation efficiency is enhanced by adopting the optimized method and the practicability of workspace study is improved by proposing the orientation density.
基金supported by the National Natural Science Foundation of China(Grant Nos.52064006 and 52004072)It was.also supported by the program(Grant No.202006050112)of China Scholarship Council(CSC)for the first author's visit at the Helm-holtz Centre Potsdam,GFZ German Research Centre for Geosciences.
文摘Unconventional resources like shale gas has been the focus of intense research and development for two decades. Apart from intrinsic geologic factors that control the gas shale productivity (e.g. organic matter content, bedding planes, natural fractures, porosity and stress regime among others), external factors like wellbore orientation and stimulation design play a role. In this study, we present a series of true triaxial hydraulic fracturing experiments conducted on Lushan shale to investigate the interplay of internal factors (bedding, natural fractures and in situ stress) and external factors (wellbore orientation) on the growth process of fracture networks in cubic specimens of 200 mm in length. We observe relatively low breakdown pressure and fracture propagation pressure as the wellbore orientation and/or the maximum in situ stress is subparallel to the shale bedding plane. The wellbore orientation has a more prominent effect on the breakdown pressure, but its effect is tapered with increasing angle of bedding inclination. The shale breakdown is followed by an abrupt response in sample displacement, which reflects the stimulated fracture volume. Based on fluid tracer analysis, the morphology of hydraulic fractures (HF) is divided into four categories. Among the categories, activation of bedding planes (bedding failure, BF) and natural fractures (NF) significantly increase bifurcation and fractured areas. Under the same stress regime, a horizontal wellbore is more favorable to enhance the complexity of hydraulic fracture networks. This is attributed to the relatively large surface area in contact with the bedding plane for the horizontal borehole compared to the case with a vertical wellbore. These findings provide important references for hydraulic fracturing design in shale reservoirs.
文摘The basic scheme of the orientation detection system using L-shape reticle is introduced. The dimension of the patterns on the reticle of the system in practical applications is designed and an analysis of the principle of abstracting the orientation information of the target and the effects and formation method of self-adapting tracking gate is presented. The research result shows that the orientation detection system using L-shape reticle has a good effect on space-filtering, the signals that the orientation detection system sends out are easy to be processed by computer, its self-adapting tracking gate has a strong anti-interference ability, and the whole system's searching and tracking performances are quite high.
文摘In Zimbabwe sweet potato (Ipomoea batatas L.) production is practiced under different tillage systems with varying vine orientations, which contribute to variable yields. Limited research on yield loss due to these different practices is available despite that the majority of farmers are growing sweet potatoes to sustain their livelihoods. A field study was carried out at Midlands State University in the 2013/14 rainy season, to determine the effect of tillage systems and vine orientation on yield of sweet potato. A 2 × 3 factorial treatment structure in a randomized complete block design (RCBD), with three replications was used. Tillage systems had two factors (ridge and mound) and three vine orientations were used (horizontal, fold and loop). Data on storage root length, storage root diameter and storage root weight was subjected to Analysis of Variance (ANOVA) at 5% significance level. There was no interaction (p < 0.05) between tillage systems and vine orientations on storage root diameter, storage root length and storage root yield. The horizontal vine orientation gave statistically significant (p < 0.05) storage roots diameter of width 405 mm. Conversely the loop vine orientation had statistically the least (316 mm) storage root diameter. Horizontal vine orientation had significantly (p < 0.05) wider storage roots than the loop vine orientation. The ridge recorded longer (134.2 mm) mean storage root length, while those from mounds had shorter (115.9 mm) root length. The loop and the horizontal vine orientations recorded statistically the highest (35.5 t/ha and 34.8 t/ha respectively) sweet potato storage root yield. On the other hand, the fold vine orientation obtained significantly the lowest (28.7 t/ha) storage root yield. The research concluded that the horizontal and fold vine orientations had the widest storage root diameter and the ridge had longer storage root lengths. The loop and horizontal vine orientations are recommended in sweet potato production if high yields are to be achieved.
文摘In consideration of the present conditions of telecom service providers in China,the objectives and possible processes of con- structing telecom resource management systems(RMS)in China are analyzed.The system boundary with other network manage- ment systems and the interface protocols are discussed.It is sug- gested that the telecom resource management system should be constructed in a proper sequence and developed in different stages.
文摘Euler’s rotation theorem and tensor rotation technique are applied to develop a generalized mathematical model for determining photoelastic constants in arbitrary orientation of cubic crystal system. Two times rotations are utilized in the model relating to crystallographic coordinates with Cartesian coordinates. The symmetry of photoelastic constants is found to have strong dependence with rotation angle. Using the model, one can determine photoelastic constants in any orientation by selecting appropriate rotation angle. The outcome of this study helps to characterize spatial variation of residual strain in crystalline as well as polycrystalline materials having cubic structure using the experimental technique known as scanning infrared polariscope.
文摘The blast-induced ground vibrations can be significantly controlled by varying the location and orien-tation of point of interest from blast site.The blast waves generated due to individual holes get super-imposed and resultant peak particle velocity(PPV)generates.With the orientation sequence of holes blasts on site,the superimposition angle of wave changes and hence results in significant variation in resultant PPV.The orientation with respect to the initiation of blasts resulting in lowest PPV needs to be identified for any site.By knowing the PPV contour of vibration waves in mine sites,it is possible to reduce the vibration on the structures by changing the initiation sequence.In this paper,experimental blasts were conducted at two different mine sites and the PPV values were recorded at different ori-entations from the blast site and its initiation sequence.The PPV contours were drawn to identify the orientation with least and highest PPV generation line.It was found that by merely changing the initi-ation sequence of blasts with respect to the sensitive structure or point of interest,the PPV values can be reduced significantly up to 76.9%.
基金supported by the Ho Chi Minh City Department of Science and Technology of Vietnam,under grant number 116/2020/HDQPTKHCN.
文摘Collagen provides tissue strength and structural integrity.Quanti fication of the orientated dispersion of collagen fibers is an important factor when studying the mechanical properties of the cervix.In this study,for the first time,a new method for rapid characterization of the collagen fiber orientations of the cervix using linearly polarized light colposcopy is presented.A total of 24 colposcopic images were captured using a cross-polarized imaging system with white LED light sources.In the preprocessing stage,the Red channel of the RGB image was chosen,which contains no information of the blood vessels because of the low-absorption of blood cells in the red region.OrientationJ,which is an ImageJ plug-in,was used to estimate the local orientation of the collagen fibers.The result shows that in the nonpregnant cervix,the middle zone(Zone 2)has circumferentially aligned collagen fibers while the inner zone(Zone 1)has randomly arranged.The collagen fiber dispersion in Zone 2 is much smaller than that in Zone 1 at all four quadrants region(anterior,posterior,left,and right quadrant).This new analysis technique could potentially combine with diagnostic tools to provide a quantitative platform of collagen fibers in the clinic.
基金partly supported by the grants(51973027 and 52003044)from the National Natural Science Foundation of Chinathe Fundamental Research Funds for the Central Universities(2232020A-08)+5 种基金International Cooperation Fund of Science and Technology Commission of Shanghai Municipality(21130750100)Major Scientific and Technological Innovation Projects of Shandong Province(2021CXGC011004)supported by the Chang Jiang Scholars Programthe Innovation Program of Shanghai Municipal Education Commission(2019-01-07-00-03-E00023)to Prof.Xiaohong QinYoung Elite Scientists Sponsorship Program by China Association for Science and Technology,State Key Laboratory for Modification of Chemical Fibers and Polymer Materials(KF2216)Donghua University Distinguished Young Professor Program to Prof.Liming Wang。
文摘The degree of polymer chain orientation is a key structural parameter that determines the mechanical and physical properties of fibers.However,understanding and significantly tuning the orientation of fiber macromolecular chains remain elusive.Herein,we propose a novel electrospinning technique that can efficiently modulate molecular chain orientation by controlling the electric field.In contrast to the typical electrospinning method,this technique can piecewise control the electric field by applying high voltage to the metal ring instead of the needle.Benefiting from this change,a new electric field distribution can be realized,leading to a non-monotonic change in the drafting force.As a result,the macromolecular chain orientation of polyethylene oxide(PEO)nanofibers was significantly improved with a recordhigh infrared dichroic ratio.This was further confirmed by the sharp decrease in the PEO jet fineness of approximately 80%and the nanofiber diameter from 298 to 114 nm.Interestingly,the crystallinity can also be adjusted,with an obvious drop from 74.9%to 31.7%,which is different from the high crystallinity caused by oriented chains in common materials.This work guides a new perspective for the preparation of advanced electrospun nanofibers with optimal orientation–crystallinity properties,a merited feature for various applications.
基金supported by National Natural Science Foundation of China(No.62101601)。
文摘In this paper,DOA and subarray-interval estimation are considered and applied to arbitrarily distributed unmanned aerial vehicle(UAV)swarm system,in which multiple small UAVs containing uniform linear array(ULA)are divided by unknown intervals because of dynamic moving.Three parameters are taken to indicate the steering vector,namely,the direction of arrivals(DOAs)of target users,the intervals of UAVs,and the orientation angles of UAVs.The orientation angles are first estimated with an auxiliary user and the DOAs are obtained through a search free rooting method,despite the intervals among the UAVs.Afterwards,the intervals among UAVs can also be calculated via exhaustive when the number of target users are no less than three.We further develop a low-complex method to reduce the computational complexity during subarray-interval estimation.The deterministic Cramér-Rao bound(CRB)of the DOA,orientation angle and subarray-interval can be inferred in a closed form.Eventually,numerical instances are cited to verify the research results.
基金supported by the National Key Research and Development Program of China(2022YFB3803300)the National Natural Science Foundation of China(51673214)the State Key Laboratory of Powder Metallurgy,Central South University,China。
文摘With the rapid rise in perovskite solar cells(PSCs)performance,it is imperative to develop scalable fabrication techniques to accelerate potential commercialization.However,the power conversion efficiencies(PCEs)of PSCs fabricated via scalable two-step sequential deposition lag far behind the state-of-the-art spin-coated ones.Herein,the additive methylammonium chloride(MACl)is introduced to modulate the crystallization and orientation of a two-step sequential doctorbladed perovskite film in ambient conditions.MACl can significantly improve perovskite film quality and increase grain size and crystallinity,thus decreasing trap density and suppressing nonradiative recombination.Meanwhile,MACl also promotes the preferred face-up orientation of the(100)plane of perovskite film,which is more conducive to the transport and collection of carriers,thereby significantly improving the fill factor.As a result,a champion PCE of 23.14%and excellent longterm stability are achieved for PSCs based on the structure of ITO/SnO_(2)/FA_(1-x)MA_xPb(I_(1-y)Br_y)_3/Spiro-OMeTAD/Ag.The superior PCEs of 21.20%and 17.54%are achieved for 1.03 cm~2 PSC and 10.93 cm~2 mini-module,respectively.These results represent substantial progress in large-scale two-step sequential deposition of high-performance PSCs for practical applications.
基金Supported by National Natural Science Foundation of China(Grant Nos.52130511,52075174).
文摘The crystal plasticity finite element method(CPFEM)is widely used to explore the microscopic mechanical behavior of materials and understand the deformation mechanism at the grain-level.However,few CPFEM simulation studies have been carried out to analyze the nanoindentation deformation mechanism of polycrystalline materials at the microscale level.In this study,a three-dimensional CPFEM-based nanoindentation simulation is performed on an Inconel 718 polycrystalline material to examine the influence of different crystallographic parameters on nanoindentation behavior.A representative volume element model is developed to calibrate the crystal plastic constitutive parameters by comparing the stress-strain data with the experimental results.The indentation force-displacement curves,stress distributions,and pile-up patterns are obtained by CPFEM simulation.The results show that the crystallographic orientation and grain boundary have little influence on the force-displacement curves of the nanoindentation,but significantly influence the local stress distributions and shape of the pile-up patterns.As the difference in crystallographic orientation between grains increases,changes in the pile-up patterns and stress distributions caused by this effect become more significant.In addition,the simulation results reveal that the existence of grain boundaries affects the continuity of the stress distribution.The obstruction on the continuity of stress distribution increases as the grain boundary angle increases.This research demonstrates that the proposed CPFEM model can well describe the microscopic compressive deformation behaviors of Inconel 718 under nanoindentation.
基金Project supported by the National Natural Science Foundation of China(Grant No.52074246)。
文摘The propagation mechanism of microcracks in nanocrystalline single crystal systems under uniaxial dynamic and static tension is investigated using the phase-field-crystal method.Both dynamic and static stretching results show that different orientation angles can induce the crack propagation mode,microscopic morphology,the free energy,crack area change,and causing fracture failure.Crack propagation mode depends on the dislocation activity near the crack tip.Brittle propagation of the crack occurs due to dislocation always at crack tip.Dislocation is emitted at the front end of the crack tip and plastic deformation occurs,which belongs to ductile propagation.The orientation angles of 9°and 14°are brittleductile mixed propagation,while the orientation angles of 19°and 30°are brittle propagation and no dislocation is formed under dynamic tension.The vacancy and vacancy connectivity phenomenon would appear when the orientation angle is14°under static tension,and the crack would be ductile propagation.While the orientation angle is 19°and 30°,the crack propagates in a certain direction,which is a kind of brittle propagation.This work has some practical significance in preventing material fracture failure and improving material performance.
基金financially supported by the National Natural Science Foundation of China (Project No.51871036,52071040 and 51421001)the open funding of International Joint Laboratory for Light Alloys (MOE),Chongqing University。
文摘Although the non-basal precipitates, those not parallel to the basal plane, are more effective to block basal slip in Mg-Al alloys, the crystallographic orientation relationship(OR) between these precipitates and the α-Mg matrix has not been well established. In this work, the crystallography of the non-basal Mg_(17)Al_(12) precipitates in AZ80 alloy was systematically investigated by transmission electron microscopy(TEM). By tilting to a suitable electron beam direction, different kinds of non-basal precipitates were recognized in TEM, and the following four new ORs between the non-basal Mg_(17)Al_(12) precipitates and the matrix were revealed: ■, and ■.Furthermore, these ORs and their habit planes were explained using the edge-to-edge matching model. The findings in this work can provide some guidelines for designing the microstructure of Mg-Al alloys to enhance their precipitation hardening potential.
基金supported by the National Natural Science Foundation of China(Grant No.51769014),which is gratefully acknowledged.
文摘Smartphones are usually packed with a large number of features.An increasing number of researchers are paying attention to the technological capabilities of smartphones,which is a new topic and research interest.This paper proposes a method using smartphones and digital photogrammetry to measure the discontinuity orientation of a rock mass.Smartphone photos satisfying a certain overlap rate provide an efficient method for generating point cloud models of rock outcrops based on image matching.Using the target and the generated point cloud model allows for determining actual geographic coordinates and the measurement of discontinuity orientations.The method proposed has been applied to two different study areas.The discontinuity orientations measured by the proposed method are compared with those measured by the manual method in two cases.The results show a good agreement,verifying the reliability and accuracy of the proposed method.The main contribution of this paper is to use knowledge of coordinate rotation to determine the actual geographic location of the model through a square target.The equipment used in this study is simple,and photogrammetric field surveys are easy to carry out.