Response characteristics of gas pressure under simultaneous static and dynamic load:Implication for coal and gas outburst mechanism

Coal and gas outbursts are dynamic disasters in which a large mass of gas and coal suddenly emerges in a mining space within a split second.The interaction between the gas pressure and stress environment is one of the key factors that induce coal and gas outbursts.In this study,first,the coupling relationship between the gas pressure in the coal body ahead of the working face and the dynamic load was investigated using experimental observations,numerical simulations,and mine-site investigations.It was observed that the impact rate of the dynamic load on the gas-bearing coal can significantly change the gas pressure.The faster the impact rate,the speedier the increase in gas pressure.Moreover,the gas pressure rise was faster closer to the impact interface.Subsequently,based on engineering background,we proposed three models of stress and gas pressure distribution in the coal body ahead of the working face:static load,stress disturbance,and dynamic load conditions.Finally,the gas pressure distribution and outburst mechanism were investigated.The high concentration of gas pressure appearing at the coal body ahead of the working face was caused by the dynamic load.The gas pressure first increased gradually to a peak value and then decreased with increasing distance from the working face.The increase in gas pressure plays a major role in outburst initiation by resulting in the ability to more easily reach the critical points needed for outburst initiation.Moreover,the stronger the dynamic load,the greater the outburst initiation risk.The results of this study provide practical guidance for the early warning and prevention of coal and gas outbursts.

Mechanism of gas pressure action during the initial failure of coal containing gas and its application for an outburst inoculation

Faced with the continuous occurrence of coal and gas outburst(hereinafter referred to as“outburst”)disasters,as a main controlling factor in the evolution process of an outburst,for gas pressure,it is still unclear about the phased characteristics of the coupling process with in situ stress,which induce coal damage and instability.Therefore,in the work based on the mining stress paths induced by typical outburst accidents,the gradual and sudden change of three-dimensional stress is taken as the background for the mechanical reconstruction of the disaster process.Then the true triaxial physical experiments are conducted on the damage and instability of coal containing gas under multiple stress paths.Finally,the response characterization between coal damage and gas pressure has been clarified,revealing the mechanism of action of gas pressure during the initial failure of coals.And the main controlling mechanism during the outburst process is elucidated in the coupling process of in situ stress with gas pressure.The results show that during the process of stress loading and unloading,the original gas pressure enters the processes of strengthening and weakening the action ability successively.And the strengthening effect continues to the period of large-scale destruction of coals.The mechanical process of gas pressure during the initial failure of coals can be divided into three stages:the enhancement of strengthening action ability,the decrease of strengthening action ability,and the weakening action ability.The entire process is implemented by changing the dominant action of in situ stress into the dominant action of gas pressure.The failure strength of coals is not only affected by its original mechanical strength,but also by the stress loading and unloading paths,showing a particularly significant effect.Three stages can be divided during outburst inoculation process.That is,firstly,the coals suffer from initial damage through the dominant action of in situ stress with synergy of gas pressure;secondly,the coals with spallation of structural division are generated through the dominant action of gas pressure with synergy of in situ stress,accompanied by further fragmentation;and finally,the fractured coals suffer from fragmentation and pulverization with the gas pressure action.Accordingly,the final broken coals are ejected out with the gas action,initiating an outburst.The research results can provide a new perspective for deepening the understanding of coal and gas outburst mechanism,laying a theoretical foundation for the innovation of outburst prevention and control technologies.

Mechanism investigation on coal and gas outburst: An overview

Coal and gas outburst is a frequent dynamic disaster during underground coal mining activities.After about 150 years of exploration,the mechanisms of outbursts remain unclear to date.Studies on outburst mechanisms worldwide focused on the physicochemical and mechanical properties of outburst-prone coal,laboratory-scale outburst experiments and numerical modeling,mine-site investigations,and doctrines of outburst mechanisms.Outburst mechanisms are divided into two categories:single-factor and multi-factor mechanisms.The multi-factor mechanism is widely accepted,but all statistical phenomena during a single outburst cannot be explained using present knowledge.Additional topics about outburst mechanisms are proposed by summarizing the phenomena that need precise explanation.The most appealing research is the microscopic process of the interaction between coal and gas.Modern physical-chemical methods can help characterize the natural properties of outburst-prone coal.Outburst experiments can compensate for the deficiency of first-hand observation at the scene.Restoring the original outburst scene by constructing a geomechanical model or numerical model and reproducing the entire outburst process based on mining environment conditions,including stratigraphic distribution,gas occurrence,and geological structure,are important.Future studies can explore outburst mechanisms at the microscale.

Elimination mechanism of coal and gas outburst based on geo‑dynamic system with stress–damage–seepage interactions

Coal and gas outburst is a complex dynamic disaster during coal underground mining.Revealing the disaster mechanism is of great signifcance for accurate prediction and prevention of coal and gas outburst.The geo-dynamic system of coal and gas outburst is proposed.The framework of geo-dynamic system is composed of gassy coal mass,geological dynamic environment and mining disturbance.Equations of stress–damage–seepage interaction for gassy coal mass is constructed to resolve the outburst elimination process by gas extraction with boreholes through layer in foor roadway.The results show the occurrence of outburst is divided into the evolution process of gestation,formation,development and termination of geo-dynamic system.The scale range of outburst occurrence is determined,which provides a spatial basis for the prevention and control of outburst.The formation criterion and instability criterion of coal and gas outburst are established.The formation criterion F1 is defned as the scale of the geo-dynamic system,and the instability criterion F2 is defned as the scale of the outburst geo-body.According to the geo-dynamic system,the elimination mechanism of coal and gas outburst—‘unloading+depressurization’is established,and the gas extraction by boreholes through layer in foor roadway for outburst elimination is given.For the research case,when the gas extraction is 120 days,the gas pressure of the coal seam is reduced to below 0.4 MPa,and the outburst danger is eliminated efectively.

Dynamic behavior of outburst two-phase flow in a coal mine T-shaped roadway:The formation of impact airflow and its disaster-causing effect

The study of the dynamic disaster mechanism of coal and gas outburst two-phase flow is crucial for improving disaster reduction and rescue ability of coal mine outburst accidents.An outburst test in a T-shaped roadway was conducted using a self-developed large-scale outburst dynamic disaster test system.We investigated the release characteristics of main energy sources in coal seam,and obtained the dynamic characteristics of outburst two-phase flow in a roadway.Additionally,we established a formation model for outburst impact flow and a model for its flow in a bifurcated structure.The results indicate that the outburst process exhibits pulse characteristics,and the rapid destruction process of coal seam and the blocking state of gas flow are the main causes of the pulse phenomenon.The outburst energy is released in stages,and the elastic potential energy is released in the vertical direction before the horizontal direction.In a straight roadway,the impact force oscillates along the roadway.With an increase in the solid–gas ratio,the two-phase flow impact force gradually increases,and the disaster range extends from the middle of the roadway to the coal seam.In the area near the coal seam,the disaster caused by the two-phase flow impact is characterized by intermittent recovery.In a bifurcated roadway,the effect of impact airflow on impact dynamic disaster is much higher than that of two-phase flow,and the impact force tends to weaken with increasing solid-gas ratio.The impact force is asymmetrically distributed;it is higher on the left of the bifurcated roadway.With an increase in the solid-gas ratio,the static pressure rapidly decreases,and the bifurcated structure accelerates the attenuation of static pressure.Moreover,secondary acceleration is observed when the shock wave moves along the T-shaped roadway,indicating that the bifurcated structure increases the shock wave velocity.

In-situ gas contents of a multi-section coal seam in Sydney basin for coal and gas outburst management

The gas content is crucial for evaluating coal and gas outburst potential in underground coal mining. This study focuses on investigating the in-situ coal seam gas content and gas sorption capacity in a representative coal seam with multiple sections (A1, A2, and A3) in the Sydney basin, where the CO_(2) composition exceeds 90%. The fast direct desorption method and associated devices were described in detail and employed to measure the in-situ gas components (Q_(1), Q_(2), and Q_(3)) of the coal seam. The results show that in-situ total gas content (Q_(T)) ranges from 9.48 m^(3)/t for the A2 section to 14.80 m^(3)/t for the A3 section, surpassing the Level 2 outburst threshold limit value, thereby necessitating gas drainage measures. Among the gas components, Q_(2) demonstrates the highest contribution to Q_(T), ranging between 55% and 70%. Furthermore, high-pressure isothermal gas sorption experiments were conducted on coal samples from each seam section to explore their gas sorption capacity. The Langmuir model accurately characterizes CO_(2) sorption behavior, with ft coefcients (R^(2)) greater than 0.99. Strong positive correlations are observed between in-situ gas content and Langmuir volume, as well as between residual gas content (Q_(3)) and sorption hysteresis. Notably, the A3 seam section is proved to have a higher outburst propensity due to its higher Q_(1) and Q_(2) gas contents, lower sorption hysteresis, and reduced coal toughness f value. The insights derived from the study can contribute to the development of efective gas management strategies and enhance the safety and efciency of coal mining operations.

ONE-DIMENSIONAL FLOW MODEL FOR COAL-GAS OUTBURSTS AND INITIATION CRITERION

This paper discribes a one-dimensional flow model to explain the basic mechanism of coal-gas outbursts.A break-start criterion of coal,as the elementary outburst criterion,is given approximately.In this ideal model,the tectonic pressure before excavation,as a load on coal body,affects the break-start and then the flow field.The flow field is decoupled with the stress field,so that the gas seepage through unbroken coal body,break-start and consequent two-phase flow,and pure gas flow can be analysed independently of the stress field. The tunnelling,an external disturbance that makes the seepage intensify relatively,is an essential factor for initiating outburst.Under steady tunnelling,seepage ought to tend to be steadily progressive.From its asymptotic solution initiation criterion is obtained.This is described by three conditions,possibility condi- tion—tectonic pressure condition,incubation condition—tunnelling or gas condition and triggering condi- tion—seepage velocity condition.

Advances in gas content based on outburst control technology in Huainan, China

The sudden and violent nature of coal and gas outbursts continues to pose a serious threat to coal mine safety in China. One of the key issues is to predict the occurrence of outbursts. Current methods that are used for predicting the outbursts in China are considered to be inadequate, inappropriate or impractical in some seam conditions. In recent years, Huainan Mining Industry Group(Huainan) in China and the Commonwealth Scientific and Industrial Research Organisation(CSIRO) in Australia have been jointly developing technology based on gas content in coal seams to predict the occurrence of outbursts in Huainan. Significant progresses in the technology development have been made, including the development of a more rapid and accurate system in determining gas content in coal seams, the invention of a sampling-while-drilling unit for fast and pointed coal sampling, and the coupling of DEM and LBM codes for advanced numerical simulation of outburst initiation and propagation. These advances are described in this paper.

The Two Main Mechanisms of Glacier Lake Outburst Flood in Tibet,China

With the global warming,the disasters of Glacier Lake Outburst Flood(GLOF) have taken place frequently in Tibet in recent years and attracted more and more attention.A systematic survey was conducted on the 19 GLOFs in Tibet to study their two main mechanisms.Investigations indicated that all the events occurred in end-moraine lakes,and the outburst occurred partially and instantly.And the breach had the shape of an arc or a trapezoid in overflow outburst and its top width was 3-5 times more than the height.The two main mechanisms of GLOFs in Tibetan end-moraine Lake were overflow and piping,and the overflow mechanism caused by iceberg collapse was dominated in most cases.A formula was proposed to calculate the critical thickness of iceberg tongue that determines the collapse.Granular analysis of the moraine materials revealed that seepage deformation is crucial in the outburst process.Finally,we conducted a case study of the Guangxiecuo Lake to show its possible process of outburst and estimated the peak discharge of the resulted flood.

Energy-limiting factor for coal and gas outburst occurrence in intact coal seam

This research reviewed the mechanics and gas desorption properties of intact coal,and tested the crushing work ratios of different intact coals,and then,studied the stress conditions for the failure or crushing of intact coal and the gas demand for the pulverization of intact coal particles.When a real-life outburst case is examined,the required minimum stress for intact coal outburst is estimated.The study concludes that the crushing work ratios of three intact coal samples vary from 294.3732 to 945.8048 J/m^(2).For the real-life case,more than 2300 MJ of transport work is needed,and 10062.09,7046.57 and 5895.47 m^(3) of gas is required when the gas pressure is 1,2 and 3 MPa,respectively.The crushing work exceeds the transport work and even reaches 13.96 times of the transport work.How to provide such an enormous crushing work is an energy-limiting factor for the outburst in intact coal.The strain energy is needed for the crushing work,and the required minimum stress is over 54.35 MPa,even reaching 300.44 MPa.These minimum stresses far exceed the in-situ vertical and horizontal stresses that can be provided at the 300–700 m mining depth range.

Determination of indices and critical values of gas parameters of the first gas outburst in a coal seam of the Xieqiao Mine

Based on the important role in mine safety played by parameters of the first gas outburst, we propose a method of combining historic data, theoretical analysis and experimental research for the purpose of crit- ical values of gas parameters of the first gas outburst in a coal seam of the Xieqiao Mine. According to a characteristic analysis and a summary of the rules of coal and gas outbursts in the No.8 coal seam of a Hua- inan mine, we have investigated their effect on coal and gas outbursts in terms such as ground stress, gas, and coal structure. We have selected gas parameters and determined the critical values of each of the fol- lowing indices： gas content as 7.7 m^3/t, tectonic coal as 0.8 m thick, the absolute gas emission as 2 m3/min, the rate of change as 0.7 m3/min, the gas desorption index of a drilling chip KI as 0.26 mL/（g min^1/2） and the values of desorption indexes Ah2 as 200 Pa. From a verification of the production, the results indicate that application of each index and their critical values significantly improve the level of safety in the pro- duction process, relieve the burden upon the mine, save much labor and bring clear economic benefits.

Study on the propagation law of shock wave resulting from coal and gas outburst

According to the formation of shock wave resulting from coal and gas outburst, the gas flow of coal and gas outburst was transformed from an unsteady flow to a steady one based on selected appropriate reference coordinates, and the mathematical expressions were then established by applying mass conservation, momentum conservation equation, and energy conservation equation. On this basis, analyzed gas flow mitigation of variable cross-section area and the outburst intensity, and the relations between cross-section area, velocity, and density; the relations between overpressures and outburst intensity were deduced. Furthermore, shock waves resulting from coal and gas outburst and outburst intensity were measured by experimental setup, the overpressure and outburst intensity of different gas pressures were obtained, and the similar conditions of the experiment were numerically simulated. The averaged overpressure and gas flow velocity of variable cross-section under different gas pressures were numerically derived. The results show that the averaged overpressure and outburst intensity obtained from simulation are in good agreement with the experimental results. Moreover, the gas flow velocity of variable cross-sections approximates to the theoretical analysis.

Research on hydraulic slotting technology controlling coal-gas outbursts

Measured to control serious coal-gas outburst in coal seam were analyzed by theory and experimented in test site.A new technique to distress the coal-bed and drain methane,called hydraulic slotting,was described in detail,and the mechanism of hydrau- lic slotting was put forward and analyzed.The characteristic parameter of hydraulic slotting was given in Jiaozuo mining area and the characteristic of validity,adaptability and secu- rity was evaluated.The results show that the stress surrounding the strata and the gas in coal seam is released efficiently and thoroughly while new techniques are taken,as slot- ting at heading face by high pressure large diameter jet.The resistance to coal and gas outbursts is increased dramatically once the area of slotting is increased to a certain size. In the process of driving 2 000 m tunnel by hydraulic slotting excavation,coal and gas outburst never occurre.The technique could be used to prevent and control potential coal-gas outburst in the proceeding of tunnel driving,and the speed tunneling could be as high as more than 2 times.

Near-source characteristics of two-phase gas-solid outbursts in roadways

Coal and gas outbursts compromise two-phase gas-solid mixtures as they propagate as shock waves and flows from their sources.Propagation is influenced by the form of the outburst,proximity to source,the structure and form of the transmitting roadways and the influence of obstacles.The following characterizes the propagation of coal and gas outbursts as two-phase gas-solid flows proximal to source where the coupled effects of pulverized coal and gas flows dominate behavior.The characteristics of shock wave propagation and attenuation were systematically examined for varied roadway geometries using experiments and numerical models.The results demonstrate that the geometry of roadway obstructions is significant and may result in partial compression and sometimes secondary overpressurization in blocked and small comer roadways leading to significant attenuation of outburst shock waves.The shock waves attenuate slowly in both straight and abruptly expanding roadways and more significantly in T-shaped roadways.The most significant attenuation appears in small angle comers and bifurcations in roadways with the largest attenuation occurring in blocked roadways.These results provide basic parameters for simplifying transport in complex roadway networks in the far-field,and guidance for the design of coal and gas outburst prevention facilities and emergency rescue.

Optimization Study of Outburst Prevention Measures for Tuzhu Coal Mine Based on Fixed Weight Clustering Analysis

Affected by many involved factors, different dimensions, data with large difference, incomplete information and so on, the most optimal selection of regional outburst prevention measures for outburst mine has become a complicated system project. The traditional way of outburst prevention measure selection belongs to qualitative method, which may cause high-cost of gas control, huge quantities of drilling work, long construction time and even secondary disaster. To solve the above-mentioned problems, in light of occurrence status of coal seam gas in No. 21 mining area of Jinzhushan Tuzhu Mine, through grey fixed weight clustering theory and a combination method of qualitative and quantitative analysis, the judging model with multi-objective classification for optimization of outburst prevention measures was established. The three weight coefficients of outburst prevention technology scheme are sorted, in order to determine the advantages and disadvantages of each outburst prevention technology scheme under the comprehensive evaluation of multi-target. Finally, the problem of quantitative selection for regional outburst prevention technology scheme is solved under the situation of multi-factor mode and incomplete information, which provides reasonable and effective technical measures for prevention of coal and gas outburst disaster.

STUDY ON THE METHOD FOR FORECASTING DANGEROUSNESS OF COAL FACE AND HEADING FACE OUTBURST BY TWO TEMPERATURE INDEXES

In line with the sensitivity of coal drillings temperature and coalbed temperature to the dangerous zone of coal and gas outburst, two temperature sensitive indexes (△Tm, △tm) for forecasting dangerousness of coal face and heading face outburst are defined, and deal with the foundation on drillings and coalbed temperatures used as sensitive indexes and the principle and method of determining drillings and coalbed temperatures. On the basis of this, we put forward the method for forecasting dangerousness of coal face and heading face outburst by two temperature sensitive indexes and determine the critical values of two temperature sensitive indexes (△Tm= 5.5℃, △tm = 4.5℃) by in-situ observation and requirement for determining sensitive index.

Outburst control technology for rapid excavation in severe outburst coal

The advantages and disadvantages of various outburst prevention measures inheading face were analyzed.The mechanism of outburst prevention about hydraulic extrusionmeasure was studied, the technological parameters were introduced, and the effectof outburst prevention was investigated.The in-situ experimental results show that thehydraulic extrusion measures are applied in serious outburst mine, not only the stress ofstimulate outburst is eliminated effectively but also the gas in coal seam is released efficiently,the measures get obvious effect on coal and gas outburst prevention, and theroadway driving speed is increased by 1.5 times, implementing a safe and rapid excavation.

Research on risk evaluation of mine gas outburst fatalness in Xiangshui Mine

The danger degree evaluation of coal and gas outburst is mainly evaluating spot risk using the safety examination table and the evaluation value can be found.Ac- cording to factors influence coal and gas outburst majorth were qualitative or fuzzy similar factors,used fuzzy gathering classification method for the coal and the gas outburst anal- ysis,established fuzzy model,according to the model adopted the fuzzy similar selective principle proceeding evaluated.Two kinds methods join together analysis can raise on the accuracy rate of the prediction.

Review of coal and gas outburst in Australian underground coal mines

Outburst of coal and gas represents a significant risk to the health and safety of mine personnel working in development and longwall production face areas.There have been over 878 outburst events recorded in twenty-two Australian underground coal mines.Most outburst incidents have been associated with abnormal geological conditions.Details of Australian outburst incidents and mining experience in conditions where gas content was above current threshold levels are presented and discussed.Mining experience suggests that for gas con-tent below 9.0 m^3/t,mining in carbon dioxide(CO2)rich seam gas conditions does not pose a greater risk of outburst than mining in CH4 rich seam gas conditions.Mining experience also suggests that where no abnormal geological structures are present that mining in areas with gas content greater than the current accepted threshold levels can be undertaken with no discernible increase in outburst risk.The current approach to determining gas content threshold limits in Australian mines has been effective in prevent-ing injury from outburst,however operational experience suggests the current method is overly conser-vative and in some cases the threshold limits are low to the point that they provide no significant reduction in outburst risk.Other factors that affect outburst risk,such as gas pressure,coal toughness and stress and geological structures are presently not incorporated into outburst threshold limits adopted in Australian mines.These factors and the development of an outburst risk index applicable to Australian underground coal mining conditions are the subject of ongoing research.

Influence of inflow discharge and bed erodibility on outburst flood of landslide dam

Accurate prediction of the hydrographs of outburst floods induced by landslide dam overtopping failure is necessary for hazard prevention and mitigation. In this study, flume model tests on the breaching of landslide dams were conducted. Unconsolidated soil materials with wide grain size distributions were used to construct the dam. The effects of different upstream inflow discharges and downstream bed soil erosion on the outburst peak discharge were investigated. Experimental results reveal that the whole hydrodynamic process of landslide dam breaching can be divided into three stages as defined by clear inflection points and peak discharges. The larger the inflow discharge, the shorter the time it takes to reach the peak discharge, and the larger the outburst flood peak discharge. The scale of the outburst floods was found to be amplified by the presence of an erodible bed located downstream of the landslide dam. This amplification decreases with the increase of upstream inflow. In addition, the results show that the existence of an erodible bed increases the density of the outburst flow, increasing its probability of transforming from a sediment flow to a debris flow.