Correlation Degree and Correlation Coefficient of Multi-Output Functions

We present definitions of the correlation degree and correlation coefficient of multi-output functions. Two relationships about the correlation degree of multi-output functions are proved. One is between the correlation degree and independency, the other is between the correlation degree and balance. Especially the paper discusses the correlation degree of affine multioutput functions. We demonstrate properties of the correlation coefficient of multi-output functions. One is the value range of the correlation coefficient, one is the relationship between the correlation coefficient and independency, and another is the sufficient and necessary condition that two multi-output functions are equivalent to each other.

Walsh Spectral Characteristics and the Auto-Correlation Function Characteristics of Forming Orthomorphic Permutations of Multi-Output Functions

Orthomorphic permutations have good characteristics in cryptosystems. In this paper, by using of knowledge about relation between orthomorphic permutations and multi-output functions, and conceptions of the generalized Walsh spectrum of multi-output functions and the auto-correlation function of multi-output functions to investigate the Walsh spectral characteristics and the auto-correlation function characteristics of orthormophic permutations, several results are obtained.

IMPROVEMENT OF THE ALGORITHM PRINCIPLES FOR MINIMIZATION OF MULTI-OUTPUT FUNCTIONS

In this paper,the application of extraction principle for logic function minimiza-tion to multi-output case is studied.A defect in original algorithm in dealing with multi-outputextrema is made up,and on this base,three kinds of less-than terms in different conditions aredefined.In addition,three kinds of generalized definition of less-than terms are given,so as to findout more efficiently the covers with minimal number of terms and irredundant function outputs.This work makes the multi-output extraction principle closer to perfection.An algorithm basedon the work is presented.

An Analysis of the Relationship between Output Corpus and Language Output Function

The study is to verify the relationship between the output corpus and language output function and to test the three func-tions of pushed output. It attempts to give some implications for non-English major and English-learning. The results show that theoutput corpus is related to language output function.

Measurements of the light output functions of plastic scintillator using ~9Be(d,n)^(10)B reaction neutron source

The light output functions for protons of ST-401 and BC-408 plastic scintillators were measured using white neutron source produced by the 9Be（d,n） 10B reaction at the HI-13 Tandem Accelerator at China Institute of Atomic Energy（CIAE）.The LOFs of plastic scintillators for protons in the energy range of 0.5-16.5 MeV were obtained by the time-of-flight（TOF） technique and an iterative procedure.Two parameters（kB and C） were deduced by fitting the experimental data.

Relationship between Multi-Output Partially Bent Functions and Multi-Output Bent Functions

In this paper, the definition of multl-output partially Bent functions is presented and some properties are discussed. Then the relationship between multi-output partially Bent functions and multi-output Bent functions is given in Theorem 4, which includes Walsh spectrum expression and function expression. This shows that multi-output partially Bent functions and multi-output Bent functions can define each other in principle. So we obtain the general method to construct multi-output partially Bent functions from multi-output Bent functions.

Dynamic design of a nonlinear energy sink with NiTiNOL-steel wire ropes based on nonlinear output frequency response functions

A novel vibration isolation device called the nonlinear energy sink(NES)with NiTiNOL-steel wire ropes(NiTi-ST)is applied to a whole-spacecraft system.The NiTi-ST is used to describe the damping of the NES,which is coupled with the modified Bouc-Wen model of hysteresis.The NES with NiTi-ST vibration reduction principle uses the irreversibility of targeted energy transfer(TET)to concentrate the energy locally on the nonlinear oscillator,and then dissipates it through damping in the NES with NiTi-ST.The generalized vibration transmissibility,obtained by the root mean square treatment of the harmonic response of the nonlinear output frequency response functions(NOFRFs),is first used as the evaluation index to analyze the whole-spacecraft system in the future.An optimization analysis of the impact of system responses is performed using different parameters of NES with NiTi-ST based on the transmissibility of NOFRFs.Finally,the effects of vibration suppression by varying the parameters of NiTi-ST are analyzed from the perspective of energy absorption.The results indicate that NES with NiTi-ST can reduce excessive vibration of the whole-spacecraft system,without changing its natural frequency.Moreover,the NES with NiTi-ST can be directly used in practical engineering applications.

Tool Condition Monitoring Based on Nonlinear Output Frequency Response Functions and Multivariate Control Chart

Tool condition monitoring(TCM)is a key technology for intelligent manufacturing.The objective is to monitor the tool operation status and detect tool breakage so that the tool can be changed in time to avoid significant damage to workpieces and reduce manufacturing costs.Recently,an innovative TCM approach based on sensor data modelling and model frequency analysis has been proposed.Different from traditional signal feature-based monitoring,the data from sensors are utilized to build a dynamic process model.Then,the nonlinear output frequency response functions,a concept which extends the linear system frequency response function to the nonlinear case,over the frequency range of the tooth passing frequency of the machining process are extracted to reveal tool health conditions.In order to extend the novel sensor data modelling and model frequency analysis to unsupervised condition monitoring of cutting tools,in the present study,a multivariate control chart is proposed for TCM based on the frequency domain properties of machining processes derived from the innovative sensor data modelling and model frequency analysis.The feature dimension is reduced by principal component analysis first.Then the moving average strategy is exploited to generate monitoring variables and overcome the effects of noises.The milling experiments of titanium alloys are conducted to verify the effectiveness of the proposed approach in detecting excessive flank wear of solid carbide end mills.The results demonstrate the advantages of the new approach over conventional TCM techniques and its potential in industrial applications.

Spectral Characteristics of the Best Affine Approach of Multi-Output m-Valued Logical Functions

This paper discusses the best affine approach （BAA） of multi-output m-valued logical functions. First, it gives the spectra of rate of accordance between multi-output m-valued logical functions and their affine functions, then analyzes the BAA of multi-output m-valued logical functions and finally gives the spectral characteristics of BAA of multi-output m-valued logical functions.

ON THE DEGREE OF COMPLETENESS OF CRYPTOGRAPHIC FUNCTIONS

This paper discusses the degree of completeness of cryptographic functions, which is one of the cryptographic criteria should be considered in the design of stream ciphers. We establish the relationships between the degree of completeness and other cryptographic criteria. For resilient Boolean functions, a method to enhance the degree of completeness is proposed, while the nonlinearity and the algebraic degree do not decrease. Moreover, two constructions of resilient functions are provided, which have optimal degree of completeness, high nonlinearity, and high algebraic degree.

基于Output Control函数生成缓存文件为php页面提速

根据PHP Out Control函数的特点,为PHP输出的内容和函数调用结果生成缓存文件,提高了PHP执行的速度。介绍了利用Output Control函数生成缓存文件的设计思想及实现过程,并对其中采用的相关技术进行了探讨。

Adaptive Control Based on Neural Networks for an Uncertain 2-DOF Helicopter System With Input Deadzone and Output Constraints

In this paper, a study of control for an uncertain2-degree of freedom(DOF) helicopter system is given. The2-DOF helicopter is subject to input deadzone and output constraints. In order to cope with system uncertainties and input deadzone, the neural network technique is introduced because of its capability in approximation. In order to update the weights of the neural network, an adaptive control method is utilized to improve the system adaptability. Furthermore, the integral barrier Lyapunov function(IBLF) is adopt in control design to guarantee the condition of output constraints and boundedness of the corresponding tracking errors. The Lyapunov direct method is applied in the control design to analyze system stability and convergence. Finally, numerical simulations are conducted to prove the feasibility and effectiveness of the proposed control based on the model of Quanser's 2-DOF helicopter.

Extended ambiguity function for bistatic MIMO radar

This paper derives the extended ambiguity function for a bistatic multiple-input multiple-output （MIMO） radar system, which includes the whole radar system parameters： geometric sensor configuration, waveforms, range, range rate, target scattering and noise characteristics. Recent research indicates the potential pa- rameter estimate performance of bistatic MIMO radars. And this ambiguity function can be used to analyze the parameter estimate performance for the relationship with the Cramer-Rao bounds of the estimated parameters. Finally, some examples are given to demonstrate the good parameter estimate performance of the bistatic MIMO radar, using the quasi-orthogonal waveforms based on Lorenz chaotic systems.

Stabilization of a class of discrete-time switched systems via observer-based output feedback

In this paper, observer-based static output feedback control problem for discrete-time uncertain switched systems is investigated under an arbitrary switching rule. The main method used in this note is combining switched Lyapunov function （SLF） method with Finsler＇s Lemma. Based on linear matrix inequality （LMI） a less conservative stability condition is established and this condition allows extra degree of freedom for stability analysis. Finally, a simulation example is given to illustrate the efficiency of the result.

Function Observer Based Event-triggered Control for Linear Systems with Guaranteed L_∞-Gain

This paper is devoted to event-triggered control design for linear systems based on function observer. More specifically, the main purpose is to design event-triggered mechanisms that trigger transmissions when the difference between the current value of the system and its previously transmitted value which includes the plant output or the function observer output exceeds an additional threshold. For such an eventtriggered mechanism, we derive conditions in terms of matrix inequality to guarantee the stability as well as longer inter-event time. We propose two approaches to investigate the closed-loop model, namely, reformulating the event-triggered control system as a hybrid system and interpreting the event-induced error as exogenous disturbance. Furthermore, the minimum inter-event time is guaranteed to be strictly positive. An example is presented to illustrate the feasibility and efficiency of the theoretic results. © 2014 Chinese Association of Automation.

Assessing Chinese Commercial Bank Technical Efficiency with a Parametric Hyperbolic Distance Function

This paper contributes to the literatures about Chinese commercial banks technical efficiency. In order to eliminate the deviation of efficiency scores caused by an undesirable output that is represented by banks’ non-performing loans, the estimation is based on an enhanced parametric hyperbolic distance function which considers not only desirable outputs but also undesirable outputs. Furthermore, we extend the model to divide the factors that affecting technical efficiency into direct factors and indirect factors and exclude the influence of the latter when analyzing the determiners of banks technical efficiency. The validity of this model is examined by a panel of bank data from 2004-2010.

Observer design and output feedback stabilization for linear singular time-delay systems with unknown inputs

The design of a functional observer and reduced-order observer with internal delay for linear singular timedelay systems with unknown inputs is discussed. The sufficient conditions of the existence of observers, which are normal linear time-delay systems, and the corresponding design steps are presented via linear matrix inequality（LMI）. Moreover, the observer-based feedback stabilizing controller is obtained. Three examples are given to show the effectiveness of the proposed methods.

Agricultural Policy, Climate Factors and Grain Output: Evidence From Household Survey Data in Rural China

This paper estimates a stochastic frontier function using a panel data set that includes 4 961 farmer households for the period of 2005-2009 to decompose the growth of grain production and the total factor productivity （TFP） growth at the farmer level. The empirical results show that the major contributor to the grain output growth for farmers is input growth and that its average contribution accounts for 60.92% of farmer’s grain production growth in the period of 2006-2009, whereas the average contributions sourced from TFP growth and residuals are only 17.30 and 21.78%, respectively. The growth of intermediate inputs is a top contributor with an average contribution of 44.46%, followed by the planted area （18.16%）, investment in fixed assets （1.05%）, and labor input （-2.75%）, indicating that the contribution from the farmer’s input growth is mainly due to the growth of intermediate inputs and that the decline in labor inputs has become an obstacle for farmers in seeking grain output growth. Among the elements consisting of TFP growth, the contribution of technical progress is the largest （32.04%）, followed by grain subsidies （8.55%）, the average monthly temperature （4.26%）, the average monthly precipitation （-0.88%）, the adjusted scale effect （-5.66%）, and growth in technical efficiency （-21.01%）. In general, the contribution of climate factors and agricultural policy factor are positive and significant.

Robust output-feedback stabilization of a class of nonlinear systems with the nonlinearities of varied form

The back-stepping designs based on confine functions are suggested for the robust output-feedback global stabilization of a class of nonlinear continuous systems; the proposed stabilizer is efficient for the nonlinear continuous systems confined by a bound function, the nonlinearities of the systems may be of varied forms or uncertain; the designed stabilizer is robust means that a class of nonlinear continuous systems can be stabilized by the same output feedback stabilization schemes; numerical simulation examples are given.