The successful execution and management of Offshore Software Maintenance Outsourcing(OSMO)can be very beneficial for OSMO vendors and the OSMO client.Although a lot of research on software outsourcing is going on,most...The successful execution and management of Offshore Software Maintenance Outsourcing(OSMO)can be very beneficial for OSMO vendors and the OSMO client.Although a lot of research on software outsourcing is going on,most of the existing literature on offshore outsourcing deals with the outsourcing of software development only.Several frameworks have been developed focusing on guiding software systemmanagers concerning offshore software outsourcing.However,none of these studies delivered comprehensive guidelines for managing the whole process of OSMO.There is a considerable lack of research working on managing OSMO from a vendor’s perspective.Therefore,to find the best practices for managing an OSMO process,it is necessary to further investigate such complex and multifaceted phenomena from the vendor’s perspective.This study validated the preliminary OSMO process model via a case study research approach.The results showed that the OSMO process model is applicable in an industrial setting with few changes.The industrial data collected during the case study enabled this paper to extend the preliminary OSMO process model.The refined version of the OSMO processmodel has four major phases including(i)Project Assessment,(ii)SLA(iii)Execution,and(iv)Risk.展开更多
The unique two-stage "Chinese path" of China’s ru-ral-urban migration, which cannot be fully explained by classical theories of economic development, makes us to give peasant workers’ transformation to urb...The unique two-stage "Chinese path" of China’s ru-ral-urban migration, which cannot be fully explained by classical theories of economic development, makes us to give peasant workers’ transformation to urban residents a top priority. On the basis of fully explaining peasant workers’ transformation to urban residents, a method for measuring its process has been advanced and then confirmed with the data of March in 2005 from surveys to peasant workers in Wuhan. Finally, the suggestions of acceler-ating peasant workers’ transformation to urban residents to pro-mote the construction of a harmonious society have been drawn from the analysis.展开更多
Complete conversion of resid into light oil needs to consume large amount of hydrogen, because the light oil has higher hydrogen content. The conversion of whole resid into light oil is not economic at the normal pric...Complete conversion of resid into light oil needs to consume large amount of hydrogen, because the light oil has higher hydrogen content. The conversion of whole resid into light oil is not economic at the normal price gap between the light and heavy oils. Hence a combination of hydrogenation process with carbon removal process is generally adopted.The heavy solvent deasphalting can selectively remove the asphaltenes and metals contained in resid while providing a large amount of easily convertible deasphalted oil for the down-stream processes.This article refers to the characteristics of heavy solvent deasphalting and its application in sour resid processing, along with various routes for utilization of deoiled asphalt.展开更多
In-situ conversion processing (ICP) of shale oil underground at the depth ranging from 300 m to 3 000 m is a physical and chemical process caused by using horizontal drilling and electric heating technology, which con...In-situ conversion processing (ICP) of shale oil underground at the depth ranging from 300 m to 3 000 m is a physical and chemical process caused by using horizontal drilling and electric heating technology, which converts heavy oil, bitumen and various organic matter into light oil and gas in a large scale, which can be called"underground refinery". ICP has several advantages as in CO2capture, recoverable resource potential and the quality of hydrocarbon output. Based on the geothermal evolution mechanism of organic materials established by Tissot et al., this study reveals that in the nonmarine organic-rich shale sequence, the amount of liquid hydrocarbon maintaining in the shale is as high as 25%in the liquid hydrocarbon window stage (R o less than 1.0%), and the unconverted organic materials (low mature-immature organic materials) in the shale interval can reach 40%to 100%. The conditions of organic-rich shale suitable for underground in-situ conversion of shale oil should be satisfied in the following aspects, TOC higher than 6%, R o ranging between 0.5%and 1%, concentrated thickness of organic-rich shale greater than 15 meters, burial depth less than 3 000 m, covering area bigger than 50 km2, good sealing condition in both up-and down-contacting sequences and water content smaller than 5%, etc. The shale oil resource in China’s onshore region is huge. It is estimated with this paper that the technical recoverable resource reaches 70-90 billion tons of oil and 60-65 trillion cubic meters of gas. The ICP of shale oil underground is believed to be a fairway to find big oil in the source kitchen in the near future. And it is also believed to be a milestone to keep China long-term stability of oil and gas sufficient supply by putting ICP of shale oil underground into real practice in the future.展开更多
Enhancing the efficiency of public services is essential to residents in mountainous areas. It is also important to promote sustainable development of these regions. Analysing residents' satisfaction with public s...Enhancing the efficiency of public services is essential to residents in mountainous areas. It is also important to promote sustainable development of these regions. Analysing residents' satisfaction with public services in mountainous areas can help in evaluating outcomes of fiscal investment and identifying potential coping approaches for improving public service efficiencies. The residents' satisfaction with public services and the factors that influence such satisfaction were examined in this study. A study of 12 towns located in the southwestern Sichuan Province was performed using an entropy-weighted analytic hierarchy process(EWAHP), the technique for order preference by similarity to ideal solution(TOPSIS) and Tobit regression methods. The results indicate that: 1) the spatial distribution of satisfaction with public services is non-uniform, and the spatial distribution structure varies for different types of public services. 2) Residents' satisfaction with public services is influenced by both objective and subjective factors. Population density, economic distance, social and cultural divisions and elevation are the major objective factors, whereas bounded rationality, the hierarchy of needs and service expectations are the main subjective factors. The most effective strategies for enhancing residents' satisfaction with public services are likely to be clustering the population, choosing supply centres with different public services, regulating the cultural division in ethnic minority towns, selecting supply priorities in accordance with residents' needs, implementing targeted intervention policies and establishing ‘bottom-up' and ‘top-down' integrated decision-making mechanisms.展开更多
A water model and a high-speed video camera were utilized in the 300-t RH equipment to study the effect of steel flow patterns in a vacuum chamber on fast decarburization and a superior flow-pattern map was obtained d...A water model and a high-speed video camera were utilized in the 300-t RH equipment to study the effect of steel flow patterns in a vacuum chamber on fast decarburization and a superior flow-pattern map was obtained during the practical RH process. There are three flow patterns with different bubbling characteristics and steel surface states in the vacuum chamber: boiling pattern(BP), transition pattern(TP), and wave pattern(WP). The effect of the liquid-steel level and the residence time of the steel in the chamber on flow patterns and decarburization reaction were investigated, respectively. The liquid-steel level significantly affected the flow-pattern transition from BP to WP, and the residence time and reaction area were crucial to evaluate the whole decarburization process rather than the circulation flow rate and mixing time. A superior flow-pattern map during the practical RH process showed that the steel flow pattern changed from BP to TP quickly, and then remained as TP until the end of decarburization.展开更多
基金This research is fully funded byUniversiti Malaysia Terengganu under the research Grant(PGRG).
文摘The successful execution and management of Offshore Software Maintenance Outsourcing(OSMO)can be very beneficial for OSMO vendors and the OSMO client.Although a lot of research on software outsourcing is going on,most of the existing literature on offshore outsourcing deals with the outsourcing of software development only.Several frameworks have been developed focusing on guiding software systemmanagers concerning offshore software outsourcing.However,none of these studies delivered comprehensive guidelines for managing the whole process of OSMO.There is a considerable lack of research working on managing OSMO from a vendor’s perspective.Therefore,to find the best practices for managing an OSMO process,it is necessary to further investigate such complex and multifaceted phenomena from the vendor’s perspective.This study validated the preliminary OSMO process model via a case study research approach.The results showed that the OSMO process model is applicable in an industrial setting with few changes.The industrial data collected during the case study enabled this paper to extend the preliminary OSMO process model.The refined version of the OSMO processmodel has four major phases including(i)Project Assessment,(ii)SLA(iii)Execution,and(iv)Risk.
文摘The unique two-stage "Chinese path" of China’s ru-ral-urban migration, which cannot be fully explained by classical theories of economic development, makes us to give peasant workers’ transformation to urban residents a top priority. On the basis of fully explaining peasant workers’ transformation to urban residents, a method for measuring its process has been advanced and then confirmed with the data of March in 2005 from surveys to peasant workers in Wuhan. Finally, the suggestions of acceler-ating peasant workers’ transformation to urban residents to pro-mote the construction of a harmonious society have been drawn from the analysis.
文摘Complete conversion of resid into light oil needs to consume large amount of hydrogen, because the light oil has higher hydrogen content. The conversion of whole resid into light oil is not economic at the normal price gap between the light and heavy oils. Hence a combination of hydrogenation process with carbon removal process is generally adopted.The heavy solvent deasphalting can selectively remove the asphaltenes and metals contained in resid while providing a large amount of easily convertible deasphalted oil for the down-stream processes.This article refers to the characteristics of heavy solvent deasphalting and its application in sour resid processing, along with various routes for utilization of deoiled asphalt.
基金Supported by the International Cooperation Project of China National Petroleum Corporation(2015D-4810-02)China National Science and Technology Major Project(2016ZX05046)
文摘In-situ conversion processing (ICP) of shale oil underground at the depth ranging from 300 m to 3 000 m is a physical and chemical process caused by using horizontal drilling and electric heating technology, which converts heavy oil, bitumen and various organic matter into light oil and gas in a large scale, which can be called"underground refinery". ICP has several advantages as in CO2capture, recoverable resource potential and the quality of hydrocarbon output. Based on the geothermal evolution mechanism of organic materials established by Tissot et al., this study reveals that in the nonmarine organic-rich shale sequence, the amount of liquid hydrocarbon maintaining in the shale is as high as 25%in the liquid hydrocarbon window stage (R o less than 1.0%), and the unconverted organic materials (low mature-immature organic materials) in the shale interval can reach 40%to 100%. The conditions of organic-rich shale suitable for underground in-situ conversion of shale oil should be satisfied in the following aspects, TOC higher than 6%, R o ranging between 0.5%and 1%, concentrated thickness of organic-rich shale greater than 15 meters, burial depth less than 3 000 m, covering area bigger than 50 km2, good sealing condition in both up-and down-contacting sequences and water content smaller than 5%, etc. The shale oil resource in China’s onshore region is huge. It is estimated with this paper that the technical recoverable resource reaches 70-90 billion tons of oil and 60-65 trillion cubic meters of gas. The ICP of shale oil underground is believed to be a fairway to find big oil in the source kitchen in the near future. And it is also believed to be a milestone to keep China long-term stability of oil and gas sufficient supply by putting ICP of shale oil underground into real practice in the future.
基金Under the auspices of the National Natural Science Foundation of China(No.41601141,41471469)Humanities and Social Sciences Youth Foundation of Ministry of Education of the People’s Republic of China(No.14YJCZH130)+1 种基金Soft Science Research Projects of Science and Technology Office of Sichuan Province(No.2015ZR0115)Research Foundation of Chengdu University of Information Technology(No.KYTZ201628,J201617)
文摘Enhancing the efficiency of public services is essential to residents in mountainous areas. It is also important to promote sustainable development of these regions. Analysing residents' satisfaction with public services in mountainous areas can help in evaluating outcomes of fiscal investment and identifying potential coping approaches for improving public service efficiencies. The residents' satisfaction with public services and the factors that influence such satisfaction were examined in this study. A study of 12 towns located in the southwestern Sichuan Province was performed using an entropy-weighted analytic hierarchy process(EWAHP), the technique for order preference by similarity to ideal solution(TOPSIS) and Tobit regression methods. The results indicate that: 1) the spatial distribution of satisfaction with public services is non-uniform, and the spatial distribution structure varies for different types of public services. 2) Residents' satisfaction with public services is influenced by both objective and subjective factors. Population density, economic distance, social and cultural divisions and elevation are the major objective factors, whereas bounded rationality, the hierarchy of needs and service expectations are the main subjective factors. The most effective strategies for enhancing residents' satisfaction with public services are likely to be clustering the population, choosing supply centres with different public services, regulating the cultural division in ethnic minority towns, selecting supply priorities in accordance with residents' needs, implementing targeted intervention policies and establishing ‘bottom-up' and ‘top-down' integrated decision-making mechanisms.
基金financially supported by the National Natural Science Foundation of China (No.51704203)the PhD Early Development Program of Taiyuan University of Science and Technology (Nos. 20152008, 20152013, and 20152018)+2 种基金Shanxi Province Science Foundation for Youths (No. 201601D202027)Key Project of Research and Development Plan of Shanxi Province (Nos. 201603D111004 and 201603D121010)NSFC-Shanxi Coal Based Low Carbon Joint Fund (No. U1510131)
文摘A water model and a high-speed video camera were utilized in the 300-t RH equipment to study the effect of steel flow patterns in a vacuum chamber on fast decarburization and a superior flow-pattern map was obtained during the practical RH process. There are three flow patterns with different bubbling characteristics and steel surface states in the vacuum chamber: boiling pattern(BP), transition pattern(TP), and wave pattern(WP). The effect of the liquid-steel level and the residence time of the steel in the chamber on flow patterns and decarburization reaction were investigated, respectively. The liquid-steel level significantly affected the flow-pattern transition from BP to WP, and the residence time and reaction area were crucial to evaluate the whole decarburization process rather than the circulation flow rate and mixing time. A superior flow-pattern map during the practical RH process showed that the steel flow pattern changed from BP to TP quickly, and then remained as TP until the end of decarburization.