Effects of Municipal Sewage Sludge on Fixation of Cr,Ni,Cu,and Zn during Co-processing of Heavy Metal-containing Waste in Cement Kilns

Cement raw meal with MSS and different heavy metals was blended to examine the fixation ratios, chemical species, and cement crystalline phases in clinkers. The results showed that blending MSS could decrease the fixation ratio of Cr, Ni, Cu, and Zn in the produced clinker by 5% to 25%. And Cr, Cu, and Zn were mainly incorporated into clinkers as metal silicates, Ni was mainly solubilized in Mg O to form magnesium nickel oxides, and the transition phases were mainly metal aluminum oxides as indicated by X-ray diffraction. The reduction of fixation ratios was likely attributed to the presence of impure elements, such as sodium and phosphorus in MSS. In addition, high concentrations（eg, 1.7 wt%） of chlorine in MSS led to metal chloride formation that could vaporize Cu, Cr, Ni, and Zn. To summarize, introducing MSS would decrease the fixation ratios of heavy metals due to the presence of impure elements, such as sodium and phosphorus and chlorine.

Present Synthesizing Situation and Application Mechanism of Hercynite in Cement Kilns

The magnesia -hercynite bricks offer a new lining to rotary cement kiln. They are well adopted and widely used in the high temperature zone of cement kiln, and have obtained good performance at rigorous and severe working conditions. The synthesis of hercynite requires a suitable atmosphere with proper O2 partial pressures which makes sure FeO can stably exist at the synthesizing temperature. Current industrial production of hercynite mainly adopts fused method. The other method, sinte- ring method, is not mature and needs further research. The magnesia - hercynite brick shows high hot toughhess, high adhesion strength to kiln crust, and good corrosion resistance to alkali salt in cement kilns. The mismatching of thermal expansion between magnesia and hercynite can improve the thermal shock resistance of the bricks, but the oxidation of partial Fe^2＋ , the high temperature solution, and low temperature exsolution of transgranular secondary spinel lead to cubical expansion, .formation of more cracks, and poor thermal shock resistance of the bricks.

Numerical analysis of behavior of active layer in rotary kilns by discrete element method

The behavior of the active layer of material bed within rotary kilns plays a key role in industrial applications.To obtain its influences on industrial process,different regimes of particle motion have been simulated by discrete element method(DEM) in three dimensions under variant rotation speeds,filling degree,based on the background of induration process of iron ore pellets.The influences of the mentioned factors on the maximum thickness of the active layer and the average velocity of particles have been investigated.The average velocity of particles increases with Froude number following the power function over a wide range,and the maximum thickness rises with increasing rotation speed in a way of logarithm.The influence of the filling degree f on the maximum thickness exhibits a good linearity under two classic regimes,but the increasing of the average velocity of the active layer is limited at f=0.4.This basic research highlights the impact of the active layer within rotary kilns,and lays a good foundation for the further investigation in mixing and heat transfer within the particle bed inside rotary kilns.

A Model for Predicting the Erosion Rate Induced by the Use of a Selective Catalytic Reduction Denitrification Technology in Cement Kilns Flue Gas

Selective catalytic reduction(SCR)is a technology by which nitrogen oxides are converted with the aid of a catalyst into diatomic nitrogen and water.It is known that the catalyst can be easily eroded if a cement kiln with a high-dust content is considered.To understand this process,numerical simulations have been carried out considering a single catalyst channel in order to study the collision and erosion of fly ash and catalysts at meso scale.Based on a response surface methodology,the effects of five factors on the erosion rate have been studied,namely,the catalyst particle velocity,the particle size,the particle concentration,the incidence angle and the catalyst porosity.The results show that the influence of particle velocity,particle size and particle concentration is statistically significant and the particle size and incidence angle have a significant effect on the erosion rate.A quadratic polynomial prediction model for the erosion rate of honeycomb catalysts in cement kiln SCR reactors is finally proposed to support the future optimization of these systems.

Digital Kilns and Furnaces——the Development Direction of Industrial Kilns and Furnaces in the 21st Century

The digital manufacturing theory is applied to the special manufacturing equipments——industrial kilns and furnaces; the concept of digital kilns & furnaces is put forward. The present status of research and application for digital technologies in fuel industrial kilns & furnaces is also introduced. Then,take the case of gas fuel kilns & furnaces,their main key technical issues are discussed. Digital kilns & furnaces as an important constituent of the digital equipments are the crucial base of the digital manufacturing. The value of research on digital kilns & furnaces and the application prospect are undoubted. It will improve product quality,reduce the manpower cost,enhance product market competitive ability,promote comprehensively tradition industries such as ceramics,metallurgy industry,and so on.

Key Points of Monolithic Lining Engineering of Rotary Kilns

There are many factors affecting the monolithic lining engineering of rotary kilns,resulting in the difficult quality control.In this paper,the key points of the whole lining engineering were discussed from the aspects of lining structure design,personnel preparation,site construction management,maintenance and baking.

Corrosion of Disposing Urban Domestic Wastes on Refractories for Cement Rotary Kilns

Corrosion of burning urban domestic wastes to alkali-resistant bricks and spalling-resistant high alumina bricks was researched by static crucible method and SEM in order to choose refractories for cement rotary kilns for collaboratively disposing wastes. The result indicates that the main corrosion mechanism is slag permeation and corrosion ; the emitted high temperature gases containing alkali, sulfur and chlorine during burning the wastes re- act with refractories forming low melting point sulfate, chloride and compound salts, which metamorphose the refractories, and the loose metamorphic layer is easy to spall under thermal stress. So, corrosion resistance and spaUing resistance shall be taken into account when choosing refractories for cement rotary kilns for collaboratively disposing wastes. It is suggested that decomposition furnaces should adopt spaUing resistant high alumina bricks and anti-coating SiC castables, and preheating equipment should adopt high strength alkali-resistant bricks and castables.

Suggestions on Refractories in Nonferrous Metal Smelting Furnaces/Kilns

This paper introduces the refractories used in various nonferrous metal smelting equipment in China and the existing problems, and puts forward suggestions on the material of refractories, application of new technologies and production management of refractories, etc.

Damage Mechanism of Silicon Carbidemullite Bricks for Transition Zone of Cement Rotary Kilns

In order to improve the service performance and explore the damage mechanism of silicon carbide-mullite bricks for the transition zone of cement rotary kilns,the phase composition and the microstructure of a used brick in the transition zone of a cement rotary kiln were analyzed by XRD,SEM and EDS.The results show that the liquid and alkali vapor phases generated by the reaction between cement materials and the silicon carbide-mullite brick mostly enter the silicon carbide-mullite brick through the pores;meanwhile,Ca+and K+in the cement penetrate through the liquid maintaining a high chemical potential energy to dissolve Al2O3 and SiO2 at the top of the liquid phase thus enhancing the phase penetration;with the decreasing temperature,crystals such as gehlenite,potassium feldspar and potassium chloride are precipitated,which destroy the original structure and increase the difference of thermal expansion coefficient between the high temperature dense end and the metamorphic layer thus resulting in cracks,spalling,and rupture.

A History of Industrial Kilns and Furnaces——Lessons for Future Energy Conservation and Environmental Protection

This is a historical compilation and analysis of the world-wide development of kilns and furnaces, covering those ones ranging from ancient earthenware kilns to modern high-tech furnaces、 including nuclear reactors and fuel cells. Special emphasis is on energy conservation and environmental protection. the historical lessons from which can be applied to future activities.

Direct-bonded Magnesite-Chrome Bricks for Kilns and Furnaces of Building Materials Industry

JC 497-92 (96)1 Contents and Applied ScopeThis standard specifies the classification, shapes and dimensions, technical requirements, test methods, inspection rules, marking, packing, transportation, storage and quality certificate of direct-bonded magnesite-chrome bricks for building materials industry. This standard is applicable to the direct-bonded magnesite-chrome bricks for cement kiln, glass melting tank and other industrial furnaces.2 Normative ReferencesGB 2997: Test method for the apparent porosity, water absorption, bulk density and true porosity of dense shaped refractory productsGB 5070: Chemical analysis method for magnesite-Chrome refractoriesGB 5072: Test method for cold crushing strength of dense shaped refractory productsGB 5989: Test method for refractoriness under load of dense shaped refractory products (Differential, with rising temperature)GB 7320: Test method for thermal expansion of refractory productsGB 7321: Sample preparation for testing of dense shaped refractory productsGB 10324: Type definition of refractory productsGB 10325: Piling, sampling, acceptance, storage and transportation of refractory products

陕北地区传统民居靠崖式砖窑承载力及稳定性评估

为研究陕北地区传统民居靠崖式砖窑的承载能力及稳定性,通过现场检测和调查靠崖式砖窑的残损情况及坍塌区域对整体结构的影响,采用有限元软件ABAQUS对窑洞单体和窑洞-边坡整体进行了承载力和稳定性分析。研究结果表明:靠崖式砖窑较严重残损主要分布在窑腿、拱顶,病害主要表现为窑腿开裂和外闪,拱券开裂、局部松动乃至坍塌;坍塌区域的地基由于应力释放引起上部窑洞部分区域倾斜、开裂;窑洞单体在外荷载作用下变形及应力较小,受地震作用影响较小;窑洞-边坡模型失稳时的强度折减系数为1.15,表明该边坡目前处于稳定状态,在降水较多时存在失稳的风险。

An Innovative Process for Direct Reduction of Cold bound Pellets from Iron Concentrate with a Coal-based Rotary Kiln

Successfully developed an innovative process of direct reduction of cold bound pellets from iron ore concentrate with a coal based rotary kiln, in comparison with the traditional direct reduction of fired oxide pellets in coal based rotary kilns , possesses such advantages as: shorter flowsheet, lower capital investment, greater economic profit, good quality of direct reduced iron. The key technologies , such as the composite binder and corresponding feasible techniques were employed in practice. A mill utilizing this process and with an annual capacity of 50 thousand ton DRI has been put into operation.

Increasing Plant Availability by Mechanical Checking of the Cement Rotary Kiln Axis

A periodic check of the cement rotary kiln axis is needed withinthe framework of preventive ma- intenance for maintaining high plantavailability. The fourth generation 'KAS-4' measuring system wasdevel- oped by Wuhan University of Technology in 1999. The system canbe carried out with rotating or stationary kiln plant. The same istrue of the measurement of tire and supporting roller diameters, theclearance of tires, the po- sition of rollers, the machining of tiresand rollers, the slops of roller surfaces, the deflection of gear,the axis of kiln. The system has been applied to the measurement for10 set of cement rotary kiln in China.

Plant Test of Industrial Waste Disposal in a Cement Kiln

Destruction of industrial waste in cement rotary kilns (CRKs) is an alternative technology for the treatment of certain types of industrial waste (IW). In this paper, three typical types of industrial wastes were co-incinerated in the CRK at Beijing Cement Plant to determine the effects of waste disposal (especially solid waste disposal) on the quality of clinker and the concentration of pollutants in air emission. Experimental results show that (1) waste disposal does not affect the quality of clinker and fly ash, and fly ash after the IW disposal can still be used in the cement production, (2) heavy metals from IW are immobilized and stabilized in the clinker and cement, and (3) concentration of pollutants in air emission is far below than the permitted values in the China National Standard-Air Pollutants Emission Standard (GB 16297-1996).

Grate-kiln pelletization of Indian hematite fines and its industrial practice

Indian hematite fines normally have a high iron grade and minor impurities; they are usually used as sinter fines for feeding into a blast furnace. In this work, the grindability properties of two kinds of Indian hematite fines and the roasting behaviors and induration characteristics of pellets made from these fines were revealed through experiments involving dry ball milling and small-scale and pilot-scale tests. In addition, the microstructures of the particles of ground India hematite fines and fired pellets were investigated using optical microscopy. On the basis of the results, a grate-kiln production line with an annual output of 1.2 Mt of oxidized pellets was established in India. This pellet plant operates stably and reliably, further confirming that preparing high-quality pellets with Indian hematite fines pretreated by dry ball milling is an industrially feasible process. © 2017, University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg.

Influence of MnO_2 Mineralizer on the Crystal Structure,Properties of SiC Kiln Furniture Bonded with Fine Silicon Powder

The properties of SiC kiln furniture bonded with fine silicon powderare related to the bonder’s crystal structure. At high temperature, it will crystallize ina-cristobalite with great bulk effect. MnO2 mineralizer can make a-cristobalite convertto a-tridymite whose bulk effect is small. The crystal structure and its amount were investigated with XRD technique. The influence of different amounts of MnO2 on thecrystal structure and polycrystal transformation, and that of crystal structure on theproperties of kiln furniture were studied. The best proportion of MnO2 added was determined to be 2.0%.

CFD prediction of physical field for multi-air channel pulverized coal burner in rotary kiln

A 3-D numerical simulation with CFX software on physical field of multi-air channel coal burner in rotary kiln was carried out. The effects of various operational and structural parameters on flame feature and temperature distribution were investigated. A thermal measurement was conducted on a rotary kiln (4.5m in diameter, 90m in length) with four-air channel coal burner to determine the boundary conditions and to verify the simulation results. The calculation result shows that the distribution of velocity near burner exit is saddle-like; recirculation zones near nozzle and wall are useful for mixture primary air with coal and high temperature fume. A little central airflow can avoid coal backing up and cool nozzle. Adjusting the ratio of internal airflow to outer airflow is an effective and major means to regulate flame and temperature distribution in sintering region. Large whirlcone angle can intensify disturbution range at flame root to accelerate ignition and mixture. Large coal size can reduce high temperature region and result in coal combusting insufficiently. Too much combustion air will lengthen flame and increase heat loss.

Leaching of iron concentrate separated from kiln slag in zinc hydrometallurgy with hydrochloric acid and its mechanism

It is taken as a novel prospective process to treat iron concentrate from hydrometallurgical zinc kiln slag forcomprehensive utilization of valuable metals by a hydrochloric acid leaching-spray pyrolysis method.The leaching mechanism ofdifferent valuable metals was studied.The results revealed that the leaching rates of Ag,Pb,Cu,Fe,As and Zn were99.91%,99.25%,95.12%,90.15%,87.58%and58.15%,respectively with6mol/L HCl and L/S ratio of10:1at60°C for120min.The actionof SiO2in leaching solution was also studied.The results showed that the precipitation and settlement of SiO2(amorphous)adsorbedpart of metal ions in solution,which greatly inhibited the leaching of Cu,Fe,As and Zn,so it is crucial to control the precipitation ofamorphous SiO2.