Based on the experimental data of KY 3F 10∶Tm 3+ reported by Diaf, K ushida′s spectral overlap model (SOM) of energy transfer between J-multipl ets was studied. Firstly, with the help of the Inokuti-Hirayama an...Based on the experimental data of KY 3F 10∶Tm 3+ reported by Diaf, K ushida′s spectral overlap model (SOM) of energy transfer between J-multipl ets was studied. Firstly, with the help of the Inokuti-Hirayama and Yokota-Tan imoto models, the luminescence decay curve of 3H 4 of Tm 3+ ion was fitted, and the fitted values of corresponding interaction parameters C D A of energy transfer and C DD of energy migration were obtained. Seco ndly, by compared with Kushida′s SOM in which the relevant Judd-Ofelt approxim ative transition rates are known, the average overlap integrals of S DD and S DA were obtained. For S DD, how to treat the contributi on of the electronic-dipole (ED) crystal field transition forbidden by C 4v site symmetry in the calculation of S DD was discussed. For S DA we suggested that, by including the contribution of the phonon sideba nds in the analysis of oscillator strength of transition, Kushida′s SOM of ED- ED resonant energy transfer rate can be extended to non-resonant phonon-assist ed D-A energy transfer. The strengths and widths of phonon sidebands in this ex ample were discussed, and the results were reasonably good.展开更多
In the framework of an overlapping generations model, forward-looking monetary policy roles and backward-looking monetary policy rules were investigated. It is shown that the monetary steady state is more likely to be...In the framework of an overlapping generations model, forward-looking monetary policy roles and backward-looking monetary policy rules were investigated. It is shown that the monetary steady state is more likely to be indeterminate under an active forwardlooking rule than under the corresponding backward-looking rule. It is also shown that backward-looking roles can render the monetary steady state unstable.展开更多
Overlapping community detection in a network is a challenging issue which attracts lots of attention in recent years.A notion of hesitant node（HN） is proposed. An HN contacts with multiple communities while the comm...Overlapping community detection in a network is a challenging issue which attracts lots of attention in recent years.A notion of hesitant node（HN） is proposed. An HN contacts with multiple communities while the communications are not strong or even accidental, thus the HN holds an implicit community structure.However, HNs are not rare in the real world network. It is important to identify them because they can be efficient hubs which form the overlapping portions of communities or simple attached nodes to some communities. Current approaches have difficulties in identifying and clustering HNs. A density-based rough set model（DBRSM） is proposed by combining the virtue of densitybased algorithms and rough set models. It incorporates the macro perspective of the community structure of the whole network and the micro perspective of the local information held by HNs, which would facilitate the further ＂growth＂ of HNs in community. We offer a theoretical support for this model from the point of strength of the trust path. The experiments on the real-world and synthetic datasets show the practical significance of analyzing and clustering the HNs based on DBRSM. Besides, the clustering based on DBRSM promotes the modularity optimization.展开更多
The overlapping generation models the western scholars have designed from various perspectives to address different kinds of issues do not reflect Chinese emerging political and economic problems, and cannot be entire...The overlapping generation models the western scholars have designed from various perspectives to address different kinds of issues do not reflect Chinese emerging political and economic problems, and cannot be entirely and blindly applied to Chinese practical situation. In this paper the authors endeavor to incorporate some western scholars' research results into their own research findings to present overlapping generations model theory in a new perspective through establishing an overlapping generations theory on population including articulation of concepts and theorems of biological generation, economic generation and social generation and the overlapping periods in biological generation and two overlapping periods in economic generation among three generations. This management model with equilibrium distribution of resource wealth includes overlapping generations length model (6), equilibrium transfer model (θ) and a complete model on equilibrium distribution among generations (δ-θ). The model展开更多
为缓解旅游领域知识分散、信息碎片化的问题,提出一种基于ChatGLM(chat generative language model)和提示微调的实体关系抽取模型ChatGLM-ppt(ChatGLM with prompt and p-tuning)。该模型借助ChatGLM以对话形式完成实体关系抽取任务,...为缓解旅游领域知识分散、信息碎片化的问题,提出一种基于ChatGLM(chat generative language model)和提示微调的实体关系抽取模型ChatGLM-ppt(ChatGLM with prompt and p-tuning)。该模型借助ChatGLM以对话形式完成实体关系抽取任务,并通过P-Tuning v2微调和添加提示模板的方法应对实体关系抽取中错误传播、实体冗余和关系重叠等问题。实验建立在自建的旅游领域数据集上,结果表明:在旅游领域实体关系抽取问题上ChatGLM-ppt模型F 1为92.19%,在处理重叠关系问题中F 1均大于90%,优于目前主流的实体关系抽取模型,证明该模型可有效提高实体关系抽取的准确率。进一步运用Neo4j图数据库构建旅游知识图谱,整合分散的旅游信息资源,对促进旅游业的数字化转型和智能化发展具有一定的参考意义。展开更多
Laser welding (LW) becomes one of the most economical high quality joining processes. LW offers the advantage of very controlled heat input resulting in low distortion and the ability to weld heat sensitive components...Laser welding (LW) becomes one of the most economical high quality joining processes. LW offers the advantage of very controlled heat input resulting in low distortion and the ability to weld heat sensitive components. To exploit efficiently the benefits presented by LW, it is necessary to develop an integrated approach to identify and control the welding process variables in order to produce the desired weld characteristics without being forced to use the traditional and fastidious trial and error procedures. The paper presents a study of weld bead geometry characteristics prediction for laser overlap welding of low carbon galvanized steel using 3D numerical modelling and experimental validation. The temperature dependent material properties, metallurgical transformations and enthalpy method constitute the foundation of the proposed modelling approach. An adaptive 3D heat source is adopted to simulate both keyhole and conduction mode of the LW process. The simulations are performed using 3D finite element model on commercial software. The model is used to estimate the weld bead geometry characteristics for various LW parameters, such as laser power, welding speed and laser beam diameter. The calibration and validation of the 3D numerical model are based on experimental data achieved using a 3 kW Nd:Yag laser system, a structured experimental design and confirmed statistical analysis tools. The results reveal that the modelling approach can provide not only a consistent and accurate prediction of the weld characteristics under variable welding parameters and conditions but also a comprehensive and quantitative analysis of process parameters effects on the weld quality. The results show great concordance between predicted and measured values for weld bead geometry characteristics, such as depth of penetration, bead width at the top surface and bead width at the interface between sheets, with an average accuracy greater than 95%.展开更多
文摘Based on the experimental data of KY 3F 10∶Tm 3+ reported by Diaf, K ushida′s spectral overlap model (SOM) of energy transfer between J-multipl ets was studied. Firstly, with the help of the Inokuti-Hirayama and Yokota-Tan imoto models, the luminescence decay curve of 3H 4 of Tm 3+ ion was fitted, and the fitted values of corresponding interaction parameters C D A of energy transfer and C DD of energy migration were obtained. Seco ndly, by compared with Kushida′s SOM in which the relevant Judd-Ofelt approxim ative transition rates are known, the average overlap integrals of S DD and S DA were obtained. For S DD, how to treat the contributi on of the electronic-dipole (ED) crystal field transition forbidden by C 4v site symmetry in the calculation of S DD was discussed. For S DA we suggested that, by including the contribution of the phonon sideba nds in the analysis of oscillator strength of transition, Kushida′s SOM of ED- ED resonant energy transfer rate can be extended to non-resonant phonon-assist ed D-A energy transfer. The strengths and widths of phonon sidebands in this ex ample were discussed, and the results were reasonably good.
基金Project supported by National Natural Science Foundation of China （Grant No. 70071012）
文摘In the framework of an overlapping generations model, forward-looking monetary policy roles and backward-looking monetary policy rules were investigated. It is shown that the monetary steady state is more likely to be indeterminate under an active forwardlooking rule than under the corresponding backward-looking rule. It is also shown that backward-looking roles can render the monetary steady state unstable.
基金supported by the National Natural Science Foundation of China(71271018)
文摘Overlapping community detection in a network is a challenging issue which attracts lots of attention in recent years.A notion of hesitant node（HN） is proposed. An HN contacts with multiple communities while the communications are not strong or even accidental, thus the HN holds an implicit community structure.However, HNs are not rare in the real world network. It is important to identify them because they can be efficient hubs which form the overlapping portions of communities or simple attached nodes to some communities. Current approaches have difficulties in identifying and clustering HNs. A density-based rough set model（DBRSM） is proposed by combining the virtue of densitybased algorithms and rough set models. It incorporates the macro perspective of the community structure of the whole network and the micro perspective of the local information held by HNs, which would facilitate the further ＂growth＂ of HNs in community. We offer a theoretical support for this model from the point of strength of the trust path. The experiments on the real-world and synthetic datasets show the practical significance of analyzing and clustering the HNs based on DBRSM. Besides, the clustering based on DBRSM promotes the modularity optimization.
文摘The overlapping generation models the western scholars have designed from various perspectives to address different kinds of issues do not reflect Chinese emerging political and economic problems, and cannot be entirely and blindly applied to Chinese practical situation. In this paper the authors endeavor to incorporate some western scholars' research results into their own research findings to present overlapping generations model theory in a new perspective through establishing an overlapping generations theory on population including articulation of concepts and theorems of biological generation, economic generation and social generation and the overlapping periods in biological generation and two overlapping periods in economic generation among three generations. This management model with equilibrium distribution of resource wealth includes overlapping generations length model (6), equilibrium transfer model (θ) and a complete model on equilibrium distribution among generations (δ-θ). The model
文摘为缓解旅游领域知识分散、信息碎片化的问题,提出一种基于ChatGLM(chat generative language model)和提示微调的实体关系抽取模型ChatGLM-ppt(ChatGLM with prompt and p-tuning)。该模型借助ChatGLM以对话形式完成实体关系抽取任务,并通过P-Tuning v2微调和添加提示模板的方法应对实体关系抽取中错误传播、实体冗余和关系重叠等问题。实验建立在自建的旅游领域数据集上,结果表明:在旅游领域实体关系抽取问题上ChatGLM-ppt模型F 1为92.19%,在处理重叠关系问题中F 1均大于90%,优于目前主流的实体关系抽取模型,证明该模型可有效提高实体关系抽取的准确率。进一步运用Neo4j图数据库构建旅游知识图谱,整合分散的旅游信息资源,对促进旅游业的数字化转型和智能化发展具有一定的参考意义。
文摘Laser welding (LW) becomes one of the most economical high quality joining processes. LW offers the advantage of very controlled heat input resulting in low distortion and the ability to weld heat sensitive components. To exploit efficiently the benefits presented by LW, it is necessary to develop an integrated approach to identify and control the welding process variables in order to produce the desired weld characteristics without being forced to use the traditional and fastidious trial and error procedures. The paper presents a study of weld bead geometry characteristics prediction for laser overlap welding of low carbon galvanized steel using 3D numerical modelling and experimental validation. The temperature dependent material properties, metallurgical transformations and enthalpy method constitute the foundation of the proposed modelling approach. An adaptive 3D heat source is adopted to simulate both keyhole and conduction mode of the LW process. The simulations are performed using 3D finite element model on commercial software. The model is used to estimate the weld bead geometry characteristics for various LW parameters, such as laser power, welding speed and laser beam diameter. The calibration and validation of the 3D numerical model are based on experimental data achieved using a 3 kW Nd:Yag laser system, a structured experimental design and confirmed statistical analysis tools. The results reveal that the modelling approach can provide not only a consistent and accurate prediction of the weld characteristics under variable welding parameters and conditions but also a comprehensive and quantitative analysis of process parameters effects on the weld quality. The results show great concordance between predicted and measured values for weld bead geometry characteristics, such as depth of penetration, bead width at the top surface and bead width at the interface between sheets, with an average accuracy greater than 95%.
