Dimethylamine oxalate manipulating CsPbI_(3) perovskite film crystallization process for high efficiency carbon electrode based perovskite solar cells

Crystallization process determines the quality of perovskite films and the performances of resultant perovskite solar cells(PSCs).Dimethylamine oxalate has been proven as a multifunctional modulator,and is explored as an efficient additive in manipulating the crystallization process of CsPbI_(3) perovskite films.On one hand,oxalate serves as the precipitator that facilitates the nucleation process of intermediate.The larger size of intermediate is conductive to the larger size and smaller grain boundaries of resultant perovskite.On the other hand,in subsequent annealing process,the phase conversion and growth process of transient perovskite can be decelerated due to the strong interactions of oxalate with both dimethylamine cation(DMA^(+))and Pb^(2+).Due to the optimized crystallization kinetics,the morphology and quality of CsPbI_(3) perovskite films are comprehensively improved with lower defect concentrations,and charge recombination loss is effectively suppressed.Benefiting from the optimized crystal quality of perovskite films,the carbon electrode-based CsPbI_(3) PSCs exhibit a champion efficiency of 18.48%.This represents one of the highest levels among all hole transport layer-free inorganic perovskite solar cells.

Severe acute kidney injury due to oxalate crystal induced severe interstitial nephritis: A case report

BACKGROUND Acute kidney injury(AKI)due to interstitial nephritis is a known condition primarily attributed to various medications.While medication-induced interstitial nephritis is common,occurrences due to non-pharmacological factors are rare.This report presents a case of severe AKI triggered by intratubular oxalate crystal deposition,leading to interstitial nephritis.The aim is to outline the case and its management,emphasizing the significance of recognizing uncommon causes of interstitial nephritis.CASE SUMMARY A 71-year-old female presented with stroke-like symptoms,including weakness,speech difficulties,and cognitive impairment.Chronic hypertension had been managed with hydrochlorothiazide(HCTZ)for over two decades.Upon admis-sion,severe hypokalemia and AKI were noted,prompting discontinuation of HCTZ and initiation of prednisolone for acute interstitial nephritis.Further investigations,including kidney biopsy,confirmed severe acute interstitial nephritis with oxalate crystal deposits as the underlying cause.Despite treatment,initial renal function showed minimal improvement.However,with prednisolone therapy and supportive measures,her condition gradually improved,high-lighting the importance of comprehensive management.CONCLUSION This case underscores the importance of a thorough diagnostic approach in identifying and addressing uncommon causes of interstitial nephritis.The occurrence of interstitial nephritis due to oxalate crystal deposition,especially without typical risk factors,emphasizes the need for vigilance in clinical practice.

Activation mechanism of ammonium oxalate with pyrite in the lime system and its response to flotation separation of pyrite from arsenopyrite

The activation properties of ammonium oxalate on the flotation of pyrite and arsenopyrite in the lime system were studied in this work.Single mineral flotation tests showed that the ammonium oxalate strongly activated pyrite in high alkalinity and high Ca^(2+)system,whereas arsenopyrite was almost unaffected.In mineral mixtures tests,the recovery difference between pyrite and arsenopyrite after adding ammonium oxalate is more than 85%.After ammonium oxalate and ethyl xanthate treatment,the hydrophobicity of pyrite increased significantly,and the contact angle increased from 66.62°to 75.15°and then to 81.21°.After ammonium oxalate treatment,the amount of ethyl xanthate adsorption on the pyrite surface significantly increased and was much greater than that on the arsenopyrite surface.Zeta potential measurements showed that after activation by ammonium oxalate,there was a shift in the zeta potential of pyrite to more negative values by adding xanthate.X-ray photoelectron spectroscopy test showed that after ammonium oxalate treatment,the O 1s content on the surface of pyrite decreased from 44.03%to 26.18%,and the S 2p content increased from 14.01%to 27.26%,which confirmed that the ammonium oxalatetreated pyrite surface was more hydrophobic than the untreated surface.Therefore,ammonium oxalate may be used as a selective activator of pyrite in the lime system,which achieves an efficient flotation separation of S-As sulfide ores under high alkalinity and high Ca2+concentration conditions.

Proposal for pathogenesis-based treatment options to reduce calcium oxalate stone recurrence

Objective:Prevalence of kidney stone disease continues to increase globally with recurrence rates between 30%and 50%despite technological and scientific advances.Reduction in recurrence would improve patient outcomes and reduce cost and stone morbidities.Our objective was to review results of experimental studies performed to determine the efficacy of readily available compounds that can be used to prevent recurrence.Methods: All relevant literature up to October 2020,listed in PubMed is reviewed.Results: Clinical guidelines endorse the use of evidence-based medications,such as alkaline agents and thiazides,to reduce urinary mineral supersaturation and recurrence.However,there may be additional steps during stone pathogenesis where medications could moderate stone risk.Idiopathic calcium oxalate stones grow attached to Randall’s plaques or plugs.Results of clinical and experimental studies suggest involvement of reactive oxygen species and oxidative stress in the formation of both the plaques and plugs.The renin-angiotensin-aldosterone system(RAAS),nicotinamide adenine dinucleotide phosphate(NADPH)oxidase,mitochondria,and NOD-like receptor pyrin domain containing-3(NLRP3)inflammasome have all been implicated at specific steps during stone pathogenesis in animal models.Conclusion: In addition to supersaturation-reducing therapies,the use of anti-oxidants,free radical scavengers,and inhibitors of NADPH oxidase,NLRP3 inflammasome,and RAAS may prove beneficial for stone prevention.Compounds such as statins and angiotensin converting enzyme inhibitors are already in use as therapeutics for hypertension and cardio-vascular disease and have previously shown to reduce calcium oxalate nephrolithiasis in rats.Although clinical evidence for their use in stone prevention in humans is limited,experimental data support they be considered along with standard evidence-based medications and clinical expertise when patients are being counselled for stone prevention.

Clinical efficacy and safety of Guipi decoction combined with escitalopram oxalate tablets in patients with depression

BACKGROUND Depression is a widespread mental health condition that requires effective treatment.In the treatment of depression,traditional Chinese medicine(TCM)offers obvious advantages,fewer adverse reactions,and a lower recurrence rate.AIM To evaluate the clinical benefits of Guipi decoction combined with escitalopram oxalate tablets for individuals with depression.METHODS In total,80 patients diagnosed as having depression were enrolled in the study and divided into either an experimental group or a control group.All of the patients were orally administered escitalopram oxalate tablets.Additionally,the experimental group received Jiajian Guipi decoction and reduced Governor vessel fumigation over 4 wk.TCM syndrome scores,Hamilton depression rating scale(HAM-D)scores,self-rating depression scale(SDS)scores,and Pittsburgh sleep quality index scores were measured for the two groups and compared before and after the treatment.The two groups were monitored for any adverse reactions.RESULTS After 4 wk of treatment,both groups exhibited a significant reduction in TCM syndrome scores compared with their pre-treatment scores(P<0.05).However,the experimental group exhibited significantly lower TCM syndrome scores than the control group(P<0.05).Similarly,the post-treatment SDS and HAM-D-24 scores were significantly lower in both groups than the pre-treatment scores(P<0.05),with the experimental group exhibiting lower scores than the control group(P<0.05).The total treatment efficiency was significantly better in the experimental group(97.14%)than in the control group(77.78%)(P<0.05).Furthermore,after 4 wk of treatment,the Pittsburgh sleep quality index scores for both groups were significantly lower than those before the treatment(P<0.05),with the experimental group exhibiting lower scores than the control group(P<0.05).The incidence of adverse reactions was significantly lower in the experimental group than in the control group(P<0.05).CONCLUSION The combination of Guipi decoction and escitalopram oxalate tablets was found to be an effective and safe treatment for depression.This combination could reduce TCM syndrome scores,improve depressive symptoms,and enhance sleep quality.

Preparation of Diphenyl Oxalate from Transesterification of Dimethyl Oxalate with Phenol over TS-1 Catalyst

Diphenyl oxalate was synthesized from transesterification of dimethyl oxalate with phenol over TS-1 ( 2.5 wt% Ti ) catalyst. TS-1 catalyst, as a heterogeneous catalyst, showed excellent selectivity of diphenyl oxalate and methylphenyl oxalate compared with other homogeneous catalysts. Lewis acid sites on TS-1 catalyst were the active sites for transesterification of dimethyl oxalate with phenol. The high selectivity was closely related to the weak acid sites over TS-1.

Development of <i>α</i>-Amino Acid Detection with Peroxyoxalate Chemiluminescence by Using Water-Acetonitrile-Ethyl Acetate Mixed Solution

Peroxyoxalate chemiluminescence was, for the first time, examined by using ternary mixed solutions of water-hydrophilic/hydrophobic organic solvent. Eosin Y as a model fluorescence compound was dissolved with the ternary solutions of water (1.0 mM carbonate buffer, pH 9.0)-acetonitrile-ethyl acetate, water-rich of 15:3:2 volume ratio and organic solvent-rich of 3:8:4 volume ratio, to which bis(2,4,6-trichlorophenyl) oxalate and hydrogen peroxide chemiluminescence reagent were added. The chemiluminescence observed with the ternary solutions, especially the organic solvent-rich solution, showed a larger signal than that observed with the water only solution or water-acetonitrile mixed solution. Chemiluminescence in the presence of twenty types of α-amino acid was similarly examined by using the ternary organic solvent-rich solution. The chemiluminescence of three α-amino acids with fluorescence properties was enhanced with the ternary solution. The data reported here may contribute to development of a new, sensitive peroxyoxalate chemiluminescence detection system.

Synthesis of Methyl Glycolate by Hydrogenation of Dimethyl Oxalate over Cu-Ag/SiO_2 Catalyst

Methyl glycolate is a good solvent and can be used as feedstock for the synthesis of some important organic chemicals. Catalytic hydrogenation of dimethyl oxalate （DMO） over copper-silver catalyst supported on silica was studied. The Cu-Ag/SiO2 catalyst supported on silica sol was prepared by homogeneous deposition-precipitation of the mixture of aqueous euprammonia complex and silica sol. The proper active temperature of Cu-Ag/SiO2 catalyst for hydrogenation of DMO was 523-623 K. The most preferable reaction conditions for methyl glycolate （MG） were optimized： temperature at 468-478 K, 40-60 mesh catalyst diameter, H2/DMO ratio 40, and 1.0 h^-1 of LHSV.

Effect of copper loading on texture,structure and catalytic performance of Cu/SiO_2 catalyst for hydrogenation of dimethyl oxalate to ethylene glycol

Cu/SiO2 catalysts prepared by a convenient and efficient method using the urea hydrolysis deposition-precipitation （UHDP） technique have been proposed focusing on the effect of copper loading.The texture,structure and composition are systematically characterized by ICP,FTIR,N 2-physisorption,N2O chemisorption,TPR,XRD and XPS.The formation of copper phyllosilicate is observed in Cu/SiO2 catalyst by adopting UHDP method,and the amount of copper phyllosilicate is related to copper loading.It is found the structure properties and catalytic performance is profoundly affected by the amount of copper phyllosilicate.The excellent catalytic activity is attributed to the synergetic effect between Cu0 and Cu ＋.DMO conversion and EG selectivity are determined by the amount of Cu0 and Cu＋,respectively.The proper copper loading （30 wt%） provides with the highest ratio of Cu ＋ /Cu0,giving rise to the highest EG yield of 95% under the reaction conditions of p=2.0 MPa,T=473 K,H2/DMO=80 and LHSV=1.0h-1.

Synthesis of Y_2O_3 Nano-Powder from Yttrium Oxalate under Ambient Temperature

High purity Y_2O_3 nano-powders was synthesized directly from solution ofindustrial YCl_3 by method of oxalate precipitation through super-micro-reactors made by complexnon-ionic surfactant. The purity and diameter of Y_2O_3 particles were controlled by such processingparameters as concentration of YCl_3 and oxalic acid and complex non-ionic surfactant etc. TEMphotomicrographs show that Y_2O_3 particles are spherical in shape, with an average diameter of lessthan 30 nm. Test results certify that the purity and particle diameter as well as the dispersion ofY_2O_3 nano-powder depend on the concentrations of YCl_3, oxalic acid and complex non-ionicsurfactant. The optimum ranges of the concentrations for YCl_3 and complex non-ionic surfactant whenthe diameter of Y_2O_3 particles is smaller than 100 nm are 0.43 ～1.4 mol ? L^(-1) and0.031～0.112 mol·L^(-1) respectively, while the mass fraction range of oxalic acid is 10% ～18% .The purity of Y_2O_3 nano-powder tested by ICP-AES analysis is 99.99% .

Paired-Pd(Ⅱ) centers embedded in HKUST-1 framework: Tuning the selectivity from dimethyl carbonate to dimethyl oxalate

CO oxidative coupling to dimethyl oxalate(DMO) is the most crucial step in coal to ethylene glycol. Pdbased supported catalysts have been verified effective for generating DMO, but concomitant generation of dimethyl carbonate(DMC) is always unavoidable. It is generally accepted that Pd(0) is the active species for producing DMO, while Pd(II) for DMC. However, density functional theory calculations have proposed that the selectivity to DMO or DMC highly depends on the space state of Pd species rather than its oxidative state. It is thus urgently desired to develop high-efficient catalysts with well-defined structure,and further to elucidate the structure-performance relationship. In this work, HKUST-1 with unique structure of paired-Cu(Ⅱ) centers was chosen as ideal support to construct the catalysts with respective paired-Pd(Ⅱ) centers and isolated-Pd(Ⅱ) centers via in situ Pd species doping. In despite of featuring Pdδ+(δ≈2) oxidation state, the synthesized paired-Pd(Ⅱ)/HKUST-1 catalyst still exhibited DMO as dominant product(90.8% of DMO selectivity). For isolated-Pd(Ⅱ)/HKUST-1 catalyst, however, the main product was DMC(84.8% of DMC selectivity). Based on catalyst characterizations, the structures of paired-Pd(Ⅱ) centers and isolated-Pd(Ⅱ) centers were determined. DMO was generated from the coupling of adjacent *COOCH;intermediates adsorbed on paired-Pd(Ⅱ) centers, while DMC was produced from the reaction between methyl nitrite and the *COOCH;intermediates formed on isolated-Pd(Ⅱ) centers. Current work is the first MOFs-based catalyst with well-defined structure being applied in CO oxidative coupling reaction, which not only sheds light on the structure-performance relationship, but also inspires the potential of using MOFs as tunable platform to design high-efficient catalysts in heterogeneous catalysis.

Electrical Investigation of Some Silver Containing Ceramics Obtained from Coprecipitated Oxalates

Silver-ceramics (Ag2MO2)(M=Co, Ni, or Cu) were prepared through thermal decompositionof coprecipitated oxalates. Pellets of these materials were annealed at 350℃ for different timeperiods up to 5 h. The effect of annealing time on the transport properties was studied. IR andX-ray spectra were also studied.

Removal of iron from ilmenite by KOH leaching-oxalate leaching method

Oxalic acid was used for the removal of iron from the intermediates of ilmenite leached by KOH liquor. Various parameters, such as pH, temperature, initial oxalate concentration, and illumination were investigated. Meanwhile, it was found that orthorhombic crystal Ti2O2（OH）2（C2O4）-H2O formed as the leaching proceeded. Scanning electronic microscope （SEM） images implied that the formation of Ti2O2（OH）2（C2O4）.H2O with good crystallinity proceeded through three stages. Calcining Ti2O2（OH）2（C2O4）·H2O, anatase （350℃） or mtile （550℃） type TiO2 was obtained, respectively. Element analysis found that the calcined product contained 94.9% TiO2 and 2.5% iron oxide, but only about 1600 ppm dissolvable iron oxide was left, which indicates that oxalic acid was comparatively effective on iron oxide removal from the intermediates. Finally, an improved route was proposed for the upgrading of ilmenite into mtile.

Effects of synthesis conditions on the structural and electrochemical properties of layered LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 cathode material via oxalate co-precipitation method

The uniform layered LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion batteries was prepared by using （Ni1/3Co1/3Mn1/3）C2O4 as precursor synthesized via oxalate co-precipitation method in air. The effects of calcination temperature and time on the structure and electrochemical properties of the LiNi1/3Co1/3Mn1/3O2 were systemically studied. XRD results revealed that the optimal calcination conditions to prepare the layered LiNi1/3Co1/3Mn1/302 were 950℃ for 15 h. Electrochemical measurement showed that the sample prepared under the such conditions has the highest initial discharge capacity of 160.8 mAh/g and the smallest irreversible capacity loss of 13.5% as well as stable cycling performance at a constant current density of 30 mA/g between 2.5 and 4.3 V versus Li at room temperature.

Neuroprotective Effect of Escitalopram Oxalate in Rats with Chronic Hypoperfusion

Summary： The neuroproteetive effects of escitalopram oxalate in rats with chronic hypoperfusion and the possible mechanism were explored. Chronic hypoperfusion （2-VO） model was prepared and given escitalopram oxalate （experimental group） or PBS （control group） after 6 weeks. Eight weeks after the operation, Morris water maze test was carried out to evaluate the learning and memory ability of the rats. The cell proliferation, three-dimensional vascular distribution, cell morphological changes in ischemic area and the plasma vascular endothelial growth factor （VEGF） were detected to explore the possible mechanisms. （1） Morris water maze test showed that the escape latency in the experimental group was significantly shorter than in the control group, while the first quadrant swimming time in the experi- mental group was significantly longer than the control group （both P〈0.01）. （2） Cerebrovascular confo- cal detection results showed that the inside diameter of capillaries was significantly less in the experi- mental group than in the control group; the vascular density was significantly increased in the experi- mental group and the total area of capillaries was also significantly increased in the experimental group as compared with the control group. （3） There was statistically significant difference in BrdU-positive cells in the ischemic brain tissue between the experimental group and the control group （P=0.003〈0.01）. （4） VEGF concentrations in the plasma and the ischemic area were higher in the experimental group than in the control group （P〈0.05）. It was concluded that escitalopram oxalate could significantly im- prove the learning and memory ability of the rats with chronic cerebral ischemia probably by the VEGF-mediated angiogenesis.

Stannous oxalate as a novel catalyst for the synthesis of polytrimethylene terephthalate

Stannous oxalate was prepared efficiently and characterized by XRD and FT-IR. It exhibited higher catalytic activity and had profitable effect than tetrabutyl titanate and stannous octoate for the synthesis of polytrimethylene terephthalate （PTT） via esterification-route. Over this catalyst, the degree of esterification of pure terephthalic acid was up to 94.4% at 260 ℃ after 1.5 h,while the intrinsic viscosity and content of terminal carboxyl groups of the corresponding PTT polyester, polymerized at 260 ℃,60 Pa for 2 h, was 0.8950 dL/g and 15 mol/t, respectively. Stannous oxalate was a promising catalyst for the synthesis of PTT polyester.

Efficient adsorption to hexavalent chromium by iron oxalate modified D301:Characterization,performance and mechanisms

Chromium is a common harmful pollutant with high toxicity and low bearing capacity of soil and water.Excellent salinity resistance,a wide pH range,and high regeneration capacity were essential for qualified adsorbents used in removing hexavalent chromium(Cr(VI))from polluted water.Herein,iron oxalate modified weak basic resin(IO@D301)for the removal of Cr(VI)was prepared by the impregnation method.The IO@D301 was characterized by scanning electron microscope(SEM),Fourier transform infrared spectroscopy(FTIR),X-Ray diffraction(XRD)and X-ray photoelectron spectroscopy(XPS).Owing to abundant amine,carboxyl groups and iron ions existing on the surface,IO@D301 possesses high adsorption and salinity resistance capacity for Cr(VI).The maximum adsorption capacity of IO301 towards Cr(VI)reached 201.30 mg·g^(-1) at 293 K and a pH of 5.The adsorption equilibrium was well fitted by the Freundlich model,and the adsorption process was described by the pseudofirst-order kinetics model as spontaneous and exothermic.The mechanism may be identified as electrostatic attraction,coordination,and reduction,which was confirmed by FT-IR and X-ray photoelectron spectroscopy.

Catalytic Performance and Texture of TEOS Based Cu/SiO_2 Catalysts for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Highly active and selective Cu/SiO2 catalysts for hydrogenation of dimethyl oxalate（DMO） to ethylene glycol（EG） were successfully prepared by means of a convenient one-pot synthetic method with tetraethoxysi lane（TEOS） as the source of silica. XRD, H2-TPR, SEM, TEM, XRF and N2 physisorption measurements were performed to characterize the texture and structure of Cu/SiO2 catalysts with different copper loadings. The active components were highly dispersed on SiO2 supports. Furthermore, the coexistence of Cu0 and Cu＋ contributed a lot to the excellent performance of Cu-TEOS catalysts. The DMO conversion reached 100% and the EG selectivity reached 95% at 498 K and 2 MPa with a high liquid hourly space velocity over the 27-Cu-TEOS catalyst with an actual cop per loading of 19.0%（mass fraction）.

Modulation of Tartrates with Various Counterions on the Phases of Calcium Oxalate in Gelatinous Systems

Effect of various counterions of tartrate on the crystallization of calcium oxalate in gel system was investigated using scanning electron microscopy and X-ray diffraction. Various tartrates with hydrogen (H2tart), sodium (Na2tart), potassium (K2tart), ammonium ((NH4)2tart), and a mixture of sodium and potassium cations (NaKtart) were considered. For H2tart, Na2tart, and (NH4)2tart, calcium oxalate dihydrate (COD) was induced. However, for K2tart and NaKtart, calcium oxalate trihydrate (COT) was obtained.

Synthesis of Cu/ZnO Flower-like Hierarchical Porous Structures and Investigation of Their Catalytic Performance for Dimethyl Oxalate Hydrogenation

The Cu/ZnO flower-like hierarchical porous structures were successfully synthesized via the cetyltrimethyl ammonium bromide(CTAB) assisted hydrothermal method. The morphology and structure as well as the catalytic performance for dimethyl oxalate(DMO) hydrogenation to ethylene glycol(EG) were investigated. Through annealing the zinc copper hydroxide carbonate(ZCHC) precursors, the Cu/ZnO flower-like hierarchical porous structures were obtained, which were assembled by a number of porous nanosheets. The catalyst made of these well-defined flower-like hierarchical porous structures with large specific surface area and effective gas diffusion path via the well-aligned porous structures showed higher EG selectivity and yield as compared to the Cu/ZnO catalyst obtained by conventional co-precipitation technique. The results indicated that the Cu/ZnO flower-like hierarchical porous structures have excellent potential application for manufacture of high performance catalysts.