P-Δ effect on inelastic displacement ratio spectra for inelastic structures

For the evaluation of structures with known ductility demands,the constant-ductility displacement ratio spectra(CDDRS) are particularly useful for providing inelastic displacement ratios to estimate maximum lateral inelastic displacement demands from maximum elastic displacement demands.The CDDRS are computed for single-degree-of-freedom systems(SDOF) by considering or ignoring P-Δ effect for different ductility levels when subjected to 344 earthquake ground motions recorded in four site classes.The modified expressions of CDDRS for P-Δ effect are proposed.It is concluded that the P-Δ effect on CDDRS is significant,and the effect increases with the increase of ductility level.In the long-period region,the CDDRS ignoring P-Δ effect almost conforms to the equal-displacement rule.But in the case of higher ductility level,the CDDRS considering P-Δ effect are much higher than 1.0,which do not conform to the equal-displacement rule.

Static and dynamic inelastic P-Δ effect for seismic design

Seismic influence of P-Δ effect is the subject of this study.First,it is pointed out that the elastic static amplification factor shall be isolated in formulating the dynamic inelastic second order effect.An amplification factor for the static inelastic P-Δ effect is derived.Seismic force reduction factors(SFRF)for given ductility and stability coefficients are computed for one-story,one-span frames.The P-Δ amplification factors for seismic base shears are obtained by dividing SFRFs with and without P-Δ effect.Both P-Δ amplification factors and SFRFs are presented separately with two kinds of period abscissas.The P-Δ amplification factors are dependent on periods with the maximum occurring at about 0.75 s for site type C and approach to the static inelastic counterpart at long periods.Post-yield stiffness cannot fully counteract the adverse impact of the P-Δ effect.Formulas for seismic P-Δ amplification factors are proposed and compared to results of others.Collapse capacity spectra(CCS)are reviewed and their application in codes discussed.Available CCSs are compared with SFRFs with finite ductility computed for two ensembles of seismic records.A comparison reveals that the SFRFs are affected by seismic records,and available CCSs do not always provide upper limits for the SFRFs when stability coefficients are greater than 0.1 for frame models.

Experimental investigation on the permeability of gap-graded soil due to horizontal suffusion considering boundary effect

The boundary condition is a crucial factor affecting the permeability variation due to suffusion.An experimental investigation on the permeability of gap-graded soil due to horizontal suffusion considering the boundary effect is conducted,where the hydraulic head difference(DH)varies,and the boundary includes non-loss and soil-loss conditions.Soil samples are filled into seven soil storerooms connected in turn.After evaluation,the variation in content of fine sand(ΔR_(f))and the hydraulic conductivity of soils in each storeroom(C_(i))are analyzed.In the non-loss test,the soil sample filling area is divided into runoff,transited,and accumulated areas according to the negative or positive ΔR_(f) values.ΔR_(f) increases from negative to positive along the seepage path,and Ci decreases from runoff area to transited area and then rebounds in accumulated area.In the soil-loss test,all soil sample filling areas belong to the runoff area,where the gentle-loss,strengthened-loss,and alleviated-loss parts are further divided.ΔR_(f) decreases from the gentle-loss part to the strengthened-loss part and then rebounds in the alleviated-loss part,and C_(i) increases and then decreases along the seepage path.The relationship between ΔR_(f) and Ci is different with the boundary condition.Ci exponentially decreases with ΔR_(f) in the non-loss test and increases with ΔR_(f) generally in the soil-loss test.

Solar-driven salt-free deposition evaporation for simultaneous desalination and electricity generation based on tip-effect and siphon-effect

Solar-driven desalination is a promising way to alleviate the freshwater shortage,while is facing challenges posed by low evaporation rates and severe salt accumulation.Herein,a high-performance twodimensional(2D) solar absorber with Co_(3)O_(4) nanoneedle arrays(Co_(3)O_(4)-NN) grown on the surface of reduced graphene oxide-coated pyrolyzed silk cloth(Co_(3)O_(4)-NN/rGO/PSC) was prepared,and a salt-free evaporator system was assembled based on the composite material and siphonage-the flowing water delivery.It is revealed that the evaporation enthalpy of water can be reduced over the 2D solar absorber grown with Co_(3)O_(4)-NN_T enabling an evaporation rate of up to 2.35 kg m^(-2) h^(-1) in DI water under one solar irradiation.The desalination process can be carried out continuously even with salt concentration up to 20 wt%,due to the timely removal of concentrated brine from the interface with the assistance of directed flowing water.Moreover,the 2D structure and the flowing water also provide an opportunity to convert waste solar heat into electricity in the evaporator based on the seebeck effect,ensuring simultaneous freshwater production and power generation.It is believed that this work provides insights into designing hybrid systems with high evaporation rate,salt resistance,and electricity generation.

Locally Enhanced Flow and Electric Fields Through a Tip Effect for Efficient Flow‑Electrode Capacitive Deionization

Low-electrode capacitive deionization(FCDI)is an emerging desalination technology with great potential for removal and/or recycling ions from a range of waters.However,it still suffers from inefficient charge transfer and ion transport kinetics due to weak turbulence and low electric intensity in flow electrodes,both restricted by the current collectors.Herein,a new tip-array current collector(designated as T-CC)was developed to replace the conventional planar current collectors,which intensifies both the charge transfer and ion transport significantly.The effects of tip arrays on flow and electric fields were studied by both computational simulations and electrochemical impedance spectroscopy,which revealed the reduction of ion transport barrier,charge transport barrier and internal resistance.With the voltage increased from 1.0 to 1.5 and 2.0 V,the T-CC-based FCDI system(T-FCDI)exhibited average salt removal rates(ASRR)of 0.18,0.50,and 0.89μmol cm^(-2) min^(-1),respectively,which are 1.82,2.65,and 2.48 folds higher than that of the conventional serpentine current collectors,and 1.48,1.67,and 1.49 folds higher than that of the planar current collectors.Meanwhile,with the solid content in flow electrodes increased from 1 to 5 wt%,the ASRR for T-FCDI increased from 0.29 to 0.50μmol cm^(-2) min^(-1),which are 1.70 and 1.67 folds higher than that of the planar current collectors.Additionally,a salt removal efficiency of 99.89%was achieved with T-FCDI and the charge efficiency remained above 95%after 24 h of operation,thus showing its superior long-term stability.

Microstructural evolution during the progressive transformation-induced plasticity effect in a Fe-0.1C-5Mnmedium manganese steel

The microstructural evolution of a cold-rolled and intercritical annealed medium-Mn steel(Fe-0.10C-5Mn)was investigated during uniaxial tensile testing.In-situ observations under scanning electron microscopy,transmission electron microscopy,and X-ray diffraction analysis were conducted to characterize the progressive transformation-induced plasticity process and associated fracture initiation mechanisms.These findings were discussed with the local strain measurements via digital image correlation.The results indicated that Lüders band formation in the steel was limited to 1.5%strain,which was mainly due to the early-stage martensitic phase transformation of a very small amount of the less stable large-sized retained austenite(RA),which led to localized stress concentrations and strain hardening and further retardation of yielding.The small-sized RA exhibited high stability and progressively transformed into martensite and contributed to a stably extended Portevin-Le Chatelier effect.The volume fraction of RA gradually decreased from 26.8%to 8.2%prior to fracture.In the late deformation stage,fracture initiation primarily occurred at the austenite/martensite and ferrite/martensite interfaces and the ferrite phase.

Wafer‑Scale Vertical 1D GaN Nanorods/2D MoS_(2)/PEDOT:PSS for Piezophototronic Effect‑Enhanced Self‑Powered Flexible Photodetectors

van der Waals(vdW)heterostructures constructed by lowdimensional(0D,1D,and 2D)materials are emerging as one of the most appealing systems in next-generation flexible photodetection.Currently,hand-stacked vdW-type photodetectors are not compatible with large-areaarray fabrication and show unimpressive performance in self-powered mode.Herein,vertical 1D GaN nanorods arrays(NRAs)/2D MoS_(2)/PEDOT:PSS in wafer scale have been proposed for self-powered flexible photodetectors arrays firstly.The as-integrated device without external bias under weak UV illumination exhibits a competitive responsivity of 1.47 A W^(−1)and a high detectivity of 1.2×10^(11)Jones,as well as a fast response speed of 54/71μs,thanks to the strong light absorption of GaN NRAs and the efficient photogenerated carrier separation in type-II heterojunction.Notably,the strain-tunable photodetection performances of device have been demonstrated.Impressively,the device at−0.78%strain and zero bias reveals a significantly enhanced photoresponse with a responsivity of 2.47 A W^(−1),a detectivity of 2.6×10^(11)Jones,and response times of 40/45μs,which are superior to the state-of-the-art self-powered flexible photodetectors.This work presents a valuable avenue to prepare tunable vdWs heterostructures for self-powered flexible photodetection,which performs well in flexible sensors.

Enhanced selectivity of catalytic hydrogenation of halogenated nitroaromatics by interfacial effects

The highly selective catalytic hydrogenation of halogenated nitroaromatics was achieved by employing Pd‑based catalysts that were co‑modified with organic and inorganic ligands.It was demonstrated that the catalysts contained Pd species in mixed valence states,with high valence Pd at the metal‑support interface and zero valence Pd at the metal surface.While the strong coordination of triphenylphosphine(PPh3)to Pd0 on the Pd surface prevents the adsorption of halogenated nitroaromatics and thus dehalogenation,the coordination of sodium metavanadate(NaVO3)to high‑valence Pd sites at the interface helps to activate H2 in a heterolytic pathway for the selective hydrogenation of nitro‑groups.The excellent catalytic performance of the interfacial active sites enables the selective hydrogenation of a wide range of halogenated nitroaromatics.

Novel Methodologies for Preventing Crack Propagation in Steel Gas Pipelines Considering the Temperature Effect

Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃ to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃ and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.

Cumulative effects of stress-sensitivity factors on depressive symptoms and suicide risk:A prospective study

BACKGROUND Sensitivity to stress is essential in the onset,clinical symptoms,course,and prognosis of major depressive disorder(MDD).Meanwhile,it was unclear how variously classified but connected stress-sensitivity variables affect MDD.We hypothesize that high-level trait-and state-related stress-sensitivity factors may have different cumulative effects on the clinical symptoms and follow-up outcomes of MDD.AIM To investigate how stress-sensitivity factors added up and affected MDD clinical symptoms and follow-up results.METHODS In this prospective study,281 MDD patients were enrolled from a tertiary care setting.High-level stress-sensitivity factors were classified as trait anxiety,state anxiety,perceived stress,and neuroticism,with a total score in the top quartile of the research cohort.The cumulative effects of stress-sensitivity factors on cognitive dysfunction,disability and functional impairment,suicide risk,and depressive and anxiety symptoms were examined using an analysis of variance with linear trend analysis.Correlations were investigated further using multiple regression analysis.RESULTS Regarding high-level stress-sensitivity factors,53.40%of patients had at least one at baseline,and 29.61%had two or more.Four high-level stress-sensitivity components had significant cumulative impacts on MDD symptoms at baseline(all P<0.001).Perceived stress predicted the greatest effect sizes of state-related factors on depressive symptoms(partialη^(2)=0.153;standardizedβ=0.195;P<0.05).The follow-up outcomes were significantly impacted only by the high-level trait-related components,mainly when it came to depressive symptoms and suicide risk,which were predicted by trait anxiety and neuroticism,respectively(partialη^(2)=0.204 and 0.156;standardizedβ=0.247 and 0.392;P<0.05).CONCLUSION To enhance outcomes of MDD and lower the suicide risk,screening for stress-sensitivity factors and considering multifaceted measures,mainly focusing on trait-related ones,should be addressed clinically.

部分线性变系数分位数模型的贝叶斯P-样条估计

部分线性变系数模型是一类重要的半参数回归模型,针对该模型的参数估计问题,本文利用贝叶斯P-样条方法近似非参数部分的未知光滑函数,进而利用非对称拉普拉斯分布实现贝叶斯分位数回归,推导出所有未知参数的条件后验分布,通过Gibbs抽样和Metropolis-Hastings算法获得参数的估计值。通过数值模拟对贝叶斯P-样条方法与B-样条方法的估计效果进行比较分析,结果显示在均方误差和标准差准则下,贝叶斯P-样条方法在不同分位点上的估计效果更优。

Experimental and numerical simulation of the attenuation effect of blast shock waves in tunnels at different altitudes

Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion,which can damage personnel and equipment.Accurate prediction of the distribution pattern of explosive loads and shock wave propagation process in semi-enclosed structures at various altitude environment is key research focus in the fields of explosion shock and fluid dynamics.The effect of altitude on the propagation of shock waves in tunnels was investigated by conducting explosion test and numerical simulation.Based on the experimental and numerical simulation results,a prediction model for the attenuation of the peak overpressure of tunnel shock waves at different altitudes was established.The results showed that the peak overpressure decreased at the same measurement points in the tunnel entrance under the high altitude condition.In contrast,an increase in altitude accelerated the propagation speed of the shock wave in the tunnel.The average error between the peak shock wave overpressure obtained using the overpressure prediction formula and the measured test data was less than15%,the average error between the propagation velocity of shock waves predicted values and the test data is less than 10%.The method can effectively predict the overpressure attenuation of blast wave in tunnel at various altitudes.

Effect of ligamentum teres uteri preservation in laparoscopic high hernia sac ligation in children with indirect inguinal hernia

BACKGROUND Routinely separating the ligamentum teres uteri(LTU)intraoperatively remains an unresolved issue for female children undergoing surgery for indirect inguinal hernia(IIH).AIM To identify the effect of LTU preservation in laparoscopic high hernia sac ligation(LHSL)in children with IIH.METHODS The participants were 100 female children with unilateral IIH admitted from April 2022 to January 2024 to the Pediatric Surgery Department of Zhangzhou Municipal Hospital of Fujian Province.They were categorized based on LTU retention into the control group(n=45 cases),which underwent LTU ligation intraoperatively,and the experimental group(55 cases),which had the LTU preserved intraoperatively.All children underwent LHSL.RESULTS This study comparatively analyzed the operation time,hospitalization time,blood loss,postoperative recurrence rate,and complications(repeated pain in the inguinal region,foreign body sensation in the inguinal region,bloody exudation at the inguinal incision,and incision infection),which were all comparable between the two groups.CONCLUSION The above results indicate that LTU preservation during LHSL exerts certain therapeutic benefits for children with IIH.LTU preservation does not increase hospitalization time,blood loss,postoperative recurrence rate,and complications,which is safe and feasible,compared with conventional LTU ligation.LHSL with LTU preservation should be performed if conditions permit,which is worth popularizing.

Cost-Effective Method of Gene Synthesis by Sequencing from Microchip-Derived Oligos for Droplet Cloning

Gene synthesis has provided important contributions in various fields including genomics and medicine. Current genes are 7 - 30 cents depending on the assembly and sequencing methods performed. Demand for gene synthesis has been increasing for the past few decades, yet available methods remain expensive. A solution to this problem involves microchip-derived oligonucleotides (oligos), an oligo pool with a substantial number of oligo fragments. Microchips have been proposed as a tool for gene synthesis, but this approach has been criticized for its high error rate during sequencing. This study tests a possible cost-effective method for gene synthesis utilizing fragment assembly and golden gate assembly, which can be employed for quicker manufacturing and efficient execution of genes in the near future. The droplet method was tested in two trials to determine the viability of the method through the accuracy of the oligos sequenced. A preliminary research experiment was performed to determine the efficacy of oligo lengths ranging from two to four overlapping oligos through Gibson assembly. Of the three oligo lengths tested, only two fragment oligos were correctly sequenced. Two fragment oligos were used for the second experiment, which determined the efficacy of the droplet method in reducing gene synthesis cost and speed. The first trial utilized a high-fidelity polymerase and resulted in 3% correctly sequenced oligos, so the second trial utilized a non-high-fidelity polymerase, resulting in 8% correctly sequenced oligos. After calculating, the cost of gene synthesis lowers down to 0.8 cents/base. The final calculated cost of 0.8 cents/base is significantly cheaper than other manufacturing costs of 7 - 30 cents/base. Reducing the cost of gene synthesis provides new insight into the cost-effectiveness of present technologies and protocols and has the potential to benefit the fields of bioengineering and gene therapy.

Effect of stress on microstructures of creep-aged 2524 alloy

Microstructures of creep-aged 2524 （A1-4.3Cu-1.5Mg） aged at 170 ℃ with various stresses （0, 173 and 250 MPa） were studied on a creep machine. Ageing hardness curves under various stresses were plotted and the corresponding microstructures were characterized by transmission electron microscopy （TEM）. The results show that the value of peak hardness is increased, while the time to reach the peak hardness is reduced under an external stress. Meanwhile, the length of S（Al2CuMg） phase is shorter and the number density of S phases is larger in the creep-aged alloy. The predominant contribution to the peak hardness can be ascribed to the GPB zones with an elastic stress.

Effect of wear conditions on tribological properties of electrolessly-deposited Ni-P-Gr-SiC hybrid composite coating

The friction and wear properties of the electrolessly-deposited Ni-P-Gr-SiC composites were investigated. The effects of graphite content, load and rotation speed on the friction coefficient and wear resistance of the composite coatings were mainly investigated. The worn surface and cross section of the coatings were characterized by scanning electron microscopy and energy-dispersive X-ray analysis. The results show that the composite coatings reveal good antifriction and wear resistance due to the synergic effect of graphite and SiC particles. The formation of graphite-rich mechanically mixed layer （GRMML） on the surface of Ni-P-Gr-SiC coating contributes to the good tribological behavior of the wear counterparts and SiC particles play a load bearing role in protecting GRMML from shearing easily.

GeSi Source/Drain Structure for Suppression of Short Channel Effect in SOI p-MOSFET's

GeSi source/drain structure is purposefully adopted in SOI p MOSFET's to suppress the short channel effect (SCE).The impact of GeSi material (as source only,drain only or both source and drain) on the threshold voltage rolling off and DIBL effect is thoroughly investigated,as well as the influence of the Ge concentration and silicon film thickness.The Ge concentration should be carefully chosen as a tradeoff between the driving current and SCE improvement.The detailed physics is explained.

Influence of recovery heating rate on shape memory effect in up-quenched Cu-Al-Mn alloy

The effect of recovery heating rate on shape memory effect of the up-quenched Cu-8.88Al-10.27Mn（mass fraction, %） alloy was investigated by optical microscopy, electron transmission microscopy（TEM） and electrical resistivity measurement. It is found that the shape recovery rate decreases as the heating rate decreases. It can reach 75% when the heating rate is 20 ℃/min, while it is only 8% when the heating rate is 1 ℃/min. In situ microstructure observation indicates that the dependence of shape memory effect on recovery heating rate is caused by the stabilization of twinned martensite induced by deformation. The analysis of electrical resistivity shows that the stabilization of twinned martensite may be ascribed to formation of compound defects of vacancies and dislocations at the boundaries of twinned martensite during the slow heating. The compound defects prevent the reverse transformation of twinned martensite.

Effects of 2-[p-(Dimethylamino)Styrl] PyridineMethiodide on Slow Response Action Potentialand Slow lnward Current of Guinea PigPapillary Muscles

The effects of 2-[p-(Dimethylamino)styryl] pyridine methiodide(DSPM)on slow response action potential(SRAP)and slow inward current(Isi) of guinea pig papillary muscles were studied by intracellular microelectrodes and voltage clamp techniques.The APA and V_(max) of SRAP induced by high K￣+were decreased after 50 min of perfusion with DSPM solu- tion. Isi was suppressed from a peak value of8.8± 1.6μA to 5.7± 1.8μA, The results indicated that DSPM has a selective blocking effect on calcium channel.

血清HMGA2、P-gp与老年进展性脑梗死患者预后相关研究

目的探讨血清高迁移率族蛋白A2(HMGA2)、P-糖蛋白(P-gp)在老年进展性脑梗死患者中的表达水平及其与预后的关系。方法收集2020年2月—2023年2月大连市中心医院神经内科收治老年进展性脑梗死患者67例为进展组,老年非进展性脑梗死患者79例为非进展组;进展组根据治疗后3个月神经功能恢复情况分为预后良好亚组(n=39,mRS评分0~2分)和预后不良亚组(n=28,mRS评分3~6分)。采用酶联免疫吸附法检测血清HMGA2、P-gp水平,Pearson积矩相关分析血清HMGA2、P-gp与NIHSS评分的关系,Logistic回归分析进展性脑梗死患者预后不良的影响因素,受试者工作特征曲线(ROC)评估血清HMGA2、P-gp对预后不良的预测价值。结果进展组血清HMGA2、P-gp水平及NIHSS评分高于非进展组(t/P=13.672/<0.001,8.095/<0.001,8.226/<0.001)。进展性脑梗死患者血清HMGA2、P-gp与NIHSS评分均呈正相关(r/P=0.732/<0.001、0.708/<0.001);预后不良亚组患者年龄大于预后良好亚组,血清HMGA2、P-gp水平及NIHSS评分高于预后良好亚组(t/P=5.092/<0.001、5.103/<0.001、4.449/<0.001、2.357/0.021)。多因素Logistic回归结果显示,高龄和血清HMGA2、P-gp水平及NIHSS评分升高是进展性脑梗死患者预后不良独立危险因素[OR(95%CI)=1.429(1.093~1.869),1.288(1.082~1.533),1.586(1.161~2.165),1.483(1.120~1.963)];血清HMGA2、P-gp及二者联合预测进展性脑梗死患者预后不良的AUC分别为0.738、0.740、0.895,二者联合优于各自单独预测效能(Z/P=2.031/0.002、2.006/0.003)。结论血清HMGA2、P-gp在老年进展性脑梗死患者中异常升高,并与病情严重程度以及预后不良有关,早期联合检测两项指标可预测患者预后不良风险发生。