This paper focuses on the influence of glycidyl methacrylate functionalized polyolefin elastomer (SOG-03) on the properties of PC/PBT alloys, and also made a contrastive analysis with ethylene-methyl acrylate-glycidyl...This paper focuses on the influence of glycidyl methacrylate functionalized polyolefin elastomer (SOG-03) on the properties of PC/PBT alloys, and also made a contrastive analysis with ethylene-methyl acrylate-glycidyl methacrylate terpolymer (EMA-co-GMA) and methyl methacrylate-butadiene-styrene terpolymer (MBS), the common toughener in PC/PBT alloy. The impact performance test results of PC/PBT alloys with different addition of SOG-03 showed that the brittle-ductile transition began when SOG-03 content reached 3 wt%. The microstructure, differential scanning calorimeter (DSC) and multi-extrusion process results of PC/PBT alloys all showed that SOG-03 tends to be dispersed in PBT phase and the dispersed SOG-03 presents typical rubber-toughened polymer morphology. The toughening efficiency of MBS on PC/PBT alloy was much lower than EMA-co-GMA and SOG-03, and showed a worse processing stability after multi-extrusion process and long-term thermal ageing properties. The EMA-co-GMA and SOG-03 toughened PC/PBT alloys showed an equivalent toughness, while the PC/PBT alloy with SOG-03 showed a better processing stability during the multi-extrusion process and long-term thermal ageing property when the thermal aging time is more than 600 h.展开更多
Phosphatidylcholine(PC)and phosphatidylethanolatmine(PE)are successfully separated,meanwhile various components of phosphatidylcholines can also be separated by using the following operating conditions:the Lichrosorb ...Phosphatidylcholine(PC)and phosphatidylethanolatmine(PE)are successfully separated,meanwhile various components of phosphatidylcholines can also be separated by using the following operating conditions:the Lichrosorb Si 60 column(4.6mm×250mmi.d.5μm),hexane:iso-propanol:water:85%phosphate(45:48:7.5:0.15,volume ratio)as mobile phase,40℃,1.0mL/min flow rate and UV detection at 206 nm.This method is very simple,and its recovery and accuracy are very high,so it is especially suitable for the preliminary analysis of phosphatidylcholine components.展开更多
采用熔融接技方法制备HDPE g MAH作为相容剂,研究了接枝单体、引发剂对接枝率和熔体流动速率的影响;并与相容剂EVA对HDPE/PC共混合金体系的增容效果进行了比较。结果表明:HDPE g MAH相容剂的增容效果较好,它的加入使HDPE PC共混合金... 采用熔融接技方法制备HDPE g MAH作为相容剂,研究了接枝单体、引发剂对接枝率和熔体流动速率的影响;并与相容剂EVA对HDPE/PC共混合金体系的增容效果进行了比较。结果表明:HDPE g MAH相容剂的增容效果较好,它的加入使HDPE PC共混合金的综合力学性能得到较大提高。展开更多
文摘This paper focuses on the influence of glycidyl methacrylate functionalized polyolefin elastomer (SOG-03) on the properties of PC/PBT alloys, and also made a contrastive analysis with ethylene-methyl acrylate-glycidyl methacrylate terpolymer (EMA-co-GMA) and methyl methacrylate-butadiene-styrene terpolymer (MBS), the common toughener in PC/PBT alloy. The impact performance test results of PC/PBT alloys with different addition of SOG-03 showed that the brittle-ductile transition began when SOG-03 content reached 3 wt%. The microstructure, differential scanning calorimeter (DSC) and multi-extrusion process results of PC/PBT alloys all showed that SOG-03 tends to be dispersed in PBT phase and the dispersed SOG-03 presents typical rubber-toughened polymer morphology. The toughening efficiency of MBS on PC/PBT alloy was much lower than EMA-co-GMA and SOG-03, and showed a worse processing stability after multi-extrusion process and long-term thermal ageing properties. The EMA-co-GMA and SOG-03 toughened PC/PBT alloys showed an equivalent toughness, while the PC/PBT alloy with SOG-03 showed a better processing stability during the multi-extrusion process and long-term thermal ageing property when the thermal aging time is more than 600 h.
文摘Phosphatidylcholine(PC)and phosphatidylethanolatmine(PE)are successfully separated,meanwhile various components of phosphatidylcholines can also be separated by using the following operating conditions:the Lichrosorb Si 60 column(4.6mm×250mmi.d.5μm),hexane:iso-propanol:water:85%phosphate(45:48:7.5:0.15,volume ratio)as mobile phase,40℃,1.0mL/min flow rate and UV detection at 206 nm.This method is very simple,and its recovery and accuracy are very high,so it is especially suitable for the preliminary analysis of phosphatidylcholine components.
