In bone tissue engineering,polycaprolactone(PCL)is a promising material with good biocompatibility,but its poor degradation rate,mechanical strength,and osteogenic properties limit its application.In this study,we dev...In bone tissue engineering,polycaprolactone(PCL)is a promising material with good biocompatibility,but its poor degradation rate,mechanical strength,and osteogenic properties limit its application.In this study,we developed an Mg-1Ca/polycaprolactone(Mg-1Ca/PCL)composite scaffolds to overcome these limitations.We used a melt blending method to prepare Mg-1Ca/PCL composites with Mg-1Ca alloy powder mass ratios of 5,10,and 20 wt%.Porous scaffolds with controlled macro-and microstructure were printed using the fused deposition modeling method.We explored the mechanical strength,biocompatibility,osteogenesis performance,and molecular mechanism of the Mg-1Ca/PCL composites.The 5 and 10 wt%Mg-1Ca/PCL composites were found to have good biocompatibility.Moreover,they promoted the mechanical strength,proliferation,adhesion,and osteogenic differentiation of human bone marrow stem cells(hBMSCs)of pure PCL.In vitro degradation experiments revealed that the composite material stably released Mg_(2)+ions for a long period;it formed an apatite layer on the surface of the scaffold that facilitated cell adhesion and growth.Microcomputed tomography and histological analysis showed that both 5 and 10 wt%Mg-1Ca/PCL composite scaffolds promoted bone regeneration bone defects.Our results indicated that the Wnt/β-catenin pathway was involved in the osteogenic effect.Therefore,Mg-1Ca/PCL composite scaffolds are expected to be a promising bone regeneration material for clinical application.Statement of significance:Bone tissue engineering scaffolds have promising applications in the regeneration of critical-sized bone defects.However,there remain many limitations in the materials and manufacturing methods used to fabricate scaffolds.This study shows that the developed Ma-1Ca/PCL composites provides scaffolds with suitable degradation rates and enhanced boneformation capabilities.Furthermore,the fused deposition modeling method allows precise control of the macroscopic morphology and microscopic porosity of the scaffold.The obtained porous scaffolds can significantly promote the regeneration of bone defects.展开更多
In order to effectively control the drug-release rate of medical textiles,biodegradable polycaprolactone(PCL) and polyglycolic acid(PGA) were blended at various mass ratios to prepare composite masterbatches for medic...In order to effectively control the drug-release rate of medical textiles,biodegradable polycaprolactone(PCL) and polyglycolic acid(PGA) were blended at various mass ratios to prepare composite masterbatches for medical textiles.The surface morphology and the chemical structure of the masterbatches were analyzed.The crystallization,mass losses,strengths and drug-release rates of the composite masterbatches at different PCL/PGA mass ratios were explored.The results show that the degradation rate of the PGA carrier is obvious higher than that of the PCL carrier,and PCL,PGA and the tea polyphenol(TP) drug just physically mix without chemical reaction.During the degradation,the strength of the composite masterbatches gradually decreases.In addition,the drug-release rates of composite masterbatches at different mass ratios are different,and the more the PGA in the composite masterbatches,the faster the drug release of the composite masterbatches.The drug-release rate of the composite masterbatches can be controlled by adjusting the contents of PCL and PGA.展开更多
The purpose of this work was to fabricate three-dimensional porous scaffolds by using the salt leaching technique.This technique is simple and it does not need the pressure or dislike expensive equipment.The study sel...The purpose of this work was to fabricate three-dimensional porous scaffolds by using the salt leaching technique.This technique is simple and it does not need the pressure or dislike expensive equipment.The study selected polycaprolactone blended with carboxymethylcellulose that is the additive.The ratios of them were derived from mixture design in Minitab program that was 98/2(P1),93.5/6.5(P2),89/11(P3),84.5/15.5(P4),and 80/20(P5),respectively.The scanning electron microscopy(SEM)was applied to assess the physical properties and the pore size dimension of the scaffold from SEM micrographs.The results of SEM present the scaffolds happened interconnected porous structures that are found in all of the P1-P5 samples.The pore size dimension of all sample scaffolds is in the range of 264.11-348.28μm.Whereas the largest and the smallest of pore size are the sample of P3 and P2,respectively,while the porosity ranges from 98.06%-98.88%that the sample of P5 is the greatest and the sample of P4 is the slightly lowest.In conclusion,the blended PCL/CMC scaffolds P1-P5 were formed by salt leaching technique suitable to use in tissue engineering application.However,the amount of CMC blended with PCL should be reasonable in order to adjust the hydrophilic of the scaffold.展开更多
为了制备具有远程可控变形且性能优越的形状记忆聚合物,采用巯基-烯点击化学法制备了PCL/CB复合材料,并用FTIR、DSC、1 H NMR和DMA对复合材料的结构、热性能以及形状记忆特性等进行表征。结果表明:交联复合材料薄膜的热转变温度为50℃,...为了制备具有远程可控变形且性能优越的形状记忆聚合物,采用巯基-烯点击化学法制备了PCL/CB复合材料,并用FTIR、DSC、1 H NMR和DMA对复合材料的结构、热性能以及形状记忆特性等进行表征。结果表明:交联复合材料薄膜的热转变温度为50℃,且当预拉伸的复合材料薄膜受到100 mW/cm^(2)强度的激光照射时,CB颗粒吸收激光光子而产生光热转换且由于各向异性链松弛和应变能释放,致使上层薄膜在受到激光照射时,结晶熔融发生形状记忆效应而收缩,与此同时下层薄膜仍然处于玻璃态,上层薄膜的收缩力使PCL/CB复合材料薄膜朝着激光照射方向发生弯曲变形。同时,弯曲角度可以通过薄膜预拉伸应变量、激光照射时间以及薄膜厚度3个参数进行调控;当预拉伸应变为300%、薄膜厚度为0.4 mm时,最大弯曲角为164°。这种具备局部可编程行为的PCL/CB复合薄膜可为光响应SMP的变形模式提供新思路。展开更多
Ultrafine polycaprolactone(PCL)fibers containing watersoluble drug tetracycline hydrochloride(Tet)were prepared by emulsion electrospinning.Sorbitan monooleate(Span80)was added as an essential additive to form stable ...Ultrafine polycaprolactone(PCL)fibers containing watersoluble drug tetracycline hydrochloride(Tet)were prepared by emulsion electrospinning.Sorbitan monooleate(Span80)was added as an essential additive to form stable water/oil emulsions and fabricate fibers with core-sheath structure.Different concentrations of Span80(0-40 g/L)were used to investigate the stability of emulsion and size of dispersed droplets.The scanning electron microscope(SEM)images indicated that the morphology of the fibers with Span80 were beaded-free with diameters of 200-400 nm,and Span80 enhanced the spinnability of electrospinning solution.The laser scanning confocal microscope(LSCM)images indicated that Tet was well encapsulated into the core region of the PCL fibers.The transmission electron microscope(TEM)image showed the formation of core-sheath structure.The loading efficiency(LE)and entrapment efficiency(EE)of Tet were calculated and release profiles in artificial saliva buffer solution(pH=6.8)were also analyzed.The results revealed that LE and EE of fibers with Span80decreased with the increase of its concentration.Fibers with coresheath structure had a longer effective release lifetime than without Span80.The increase of Span80 resulted in higher hydrophilicity of fibers and faster release rate of Tet.展开更多
Composite hernia meshes designed in this paper consist of polypropylene( PP) knitted meshes and polycaprolactone( PCL)nanofiber membranes,which are produced by electro-spinning the solution composed of PCL as a solute...Composite hernia meshes designed in this paper consist of polypropylene( PP) knitted meshes and polycaprolactone( PCL)nanofiber membranes,which are produced by electro-spinning the solution composed of PCL as a solute and the mixture of dimethylformamide( DMF) and dichloromethane( DCM) as a solvent. The morphology and diameter of nanofibers in the membrane are well performed when the 15% PCL solution is electrospun under the condition of 18 k V,15 cm,0. 7 m L/h. The poresize of the membranes is less than 10 μm, where such kinds of arrangement are extremely compact to prevent the cells from growing in. The mechanical properties of the membrane with better arrangement state can reach 68. 8 c N/mm^2. The cytotoxicity test of the composite mesh demonstrates the nontoxicity of the materials.However,the bonding fastness between the membrane and the PP mesh is extremely unsubstantial. The better ways to bond PP mesh with PCL membranes should be discussed in the future.展开更多
基金supported by the National Key R&D Program of China[grant number 2021YFC2400700]the National Natural Science Foundation of China[grant numbers 82170929,81970908 and 81771039].
文摘In bone tissue engineering,polycaprolactone(PCL)is a promising material with good biocompatibility,but its poor degradation rate,mechanical strength,and osteogenic properties limit its application.In this study,we developed an Mg-1Ca/polycaprolactone(Mg-1Ca/PCL)composite scaffolds to overcome these limitations.We used a melt blending method to prepare Mg-1Ca/PCL composites with Mg-1Ca alloy powder mass ratios of 5,10,and 20 wt%.Porous scaffolds with controlled macro-and microstructure were printed using the fused deposition modeling method.We explored the mechanical strength,biocompatibility,osteogenesis performance,and molecular mechanism of the Mg-1Ca/PCL composites.The 5 and 10 wt%Mg-1Ca/PCL composites were found to have good biocompatibility.Moreover,they promoted the mechanical strength,proliferation,adhesion,and osteogenic differentiation of human bone marrow stem cells(hBMSCs)of pure PCL.In vitro degradation experiments revealed that the composite material stably released Mg_(2)+ions for a long period;it formed an apatite layer on the surface of the scaffold that facilitated cell adhesion and growth.Microcomputed tomography and histological analysis showed that both 5 and 10 wt%Mg-1Ca/PCL composite scaffolds promoted bone regeneration bone defects.Our results indicated that the Wnt/β-catenin pathway was involved in the osteogenic effect.Therefore,Mg-1Ca/PCL composite scaffolds are expected to be a promising bone regeneration material for clinical application.Statement of significance:Bone tissue engineering scaffolds have promising applications in the regeneration of critical-sized bone defects.However,there remain many limitations in the materials and manufacturing methods used to fabricate scaffolds.This study shows that the developed Ma-1Ca/PCL composites provides scaffolds with suitable degradation rates and enhanced boneformation capabilities.Furthermore,the fused deposition modeling method allows precise control of the macroscopic morphology and microscopic porosity of the scaffold.The obtained porous scaffolds can significantly promote the regeneration of bone defects.
基金Transformation and Guidance of Scientific and Technological Achievements in Shanxi Province,China(No.202104021301053)Fundamental Research Program of Shanxi Province,China(Nos. 20210302123114 and 202203021211146)+1 种基金Transformation of Scientific and Technological Achievements Programs of Higher Education Institutions in Shanxi Province,China(TSTAP)(No. 2020CG014)Open Project Program of Key Lab for Sport Shoes Upper Materials of Fujian Province,Fujian Huafeng New Material Co.,Ltd.,China(No.S SUM213)。
文摘In order to effectively control the drug-release rate of medical textiles,biodegradable polycaprolactone(PCL) and polyglycolic acid(PGA) were blended at various mass ratios to prepare composite masterbatches for medical textiles.The surface morphology and the chemical structure of the masterbatches were analyzed.The crystallization,mass losses,strengths and drug-release rates of the composite masterbatches at different PCL/PGA mass ratios were explored.The results show that the degradation rate of the PGA carrier is obvious higher than that of the PCL carrier,and PCL,PGA and the tea polyphenol(TP) drug just physically mix without chemical reaction.During the degradation,the strength of the composite masterbatches gradually decreases.In addition,the drug-release rates of composite masterbatches at different mass ratios are different,and the more the PGA in the composite masterbatches,the faster the drug release of the composite masterbatches.The drug-release rate of the composite masterbatches can be controlled by adjusting the contents of PCL and PGA.
文摘The purpose of this work was to fabricate three-dimensional porous scaffolds by using the salt leaching technique.This technique is simple and it does not need the pressure or dislike expensive equipment.The study selected polycaprolactone blended with carboxymethylcellulose that is the additive.The ratios of them were derived from mixture design in Minitab program that was 98/2(P1),93.5/6.5(P2),89/11(P3),84.5/15.5(P4),and 80/20(P5),respectively.The scanning electron microscopy(SEM)was applied to assess the physical properties and the pore size dimension of the scaffold from SEM micrographs.The results of SEM present the scaffolds happened interconnected porous structures that are found in all of the P1-P5 samples.The pore size dimension of all sample scaffolds is in the range of 264.11-348.28μm.Whereas the largest and the smallest of pore size are the sample of P3 and P2,respectively,while the porosity ranges from 98.06%-98.88%that the sample of P5 is the greatest and the sample of P4 is the slightly lowest.In conclusion,the blended PCL/CMC scaffolds P1-P5 were formed by salt leaching technique suitable to use in tissue engineering application.However,the amount of CMC blended with PCL should be reasonable in order to adjust the hydrophilic of the scaffold.
文摘为了制备具有远程可控变形且性能优越的形状记忆聚合物,采用巯基-烯点击化学法制备了PCL/CB复合材料,并用FTIR、DSC、1 H NMR和DMA对复合材料的结构、热性能以及形状记忆特性等进行表征。结果表明:交联复合材料薄膜的热转变温度为50℃,且当预拉伸的复合材料薄膜受到100 mW/cm^(2)强度的激光照射时,CB颗粒吸收激光光子而产生光热转换且由于各向异性链松弛和应变能释放,致使上层薄膜在受到激光照射时,结晶熔融发生形状记忆效应而收缩,与此同时下层薄膜仍然处于玻璃态,上层薄膜的收缩力使PCL/CB复合材料薄膜朝着激光照射方向发生弯曲变形。同时,弯曲角度可以通过薄膜预拉伸应变量、激光照射时间以及薄膜厚度3个参数进行调控;当预拉伸应变为300%、薄膜厚度为0.4 mm时,最大弯曲角为164°。这种具备局部可编程行为的PCL/CB复合薄膜可为光响应SMP的变形模式提供新思路。
基金“111 Project” Biomedical Textile Materials Science and Technology,China(No.B07024)
文摘Ultrafine polycaprolactone(PCL)fibers containing watersoluble drug tetracycline hydrochloride(Tet)were prepared by emulsion electrospinning.Sorbitan monooleate(Span80)was added as an essential additive to form stable water/oil emulsions and fabricate fibers with core-sheath structure.Different concentrations of Span80(0-40 g/L)were used to investigate the stability of emulsion and size of dispersed droplets.The scanning electron microscope(SEM)images indicated that the morphology of the fibers with Span80 were beaded-free with diameters of 200-400 nm,and Span80 enhanced the spinnability of electrospinning solution.The laser scanning confocal microscope(LSCM)images indicated that Tet was well encapsulated into the core region of the PCL fibers.The transmission electron microscope(TEM)image showed the formation of core-sheath structure.The loading efficiency(LE)and entrapment efficiency(EE)of Tet were calculated and release profiles in artificial saliva buffer solution(pH=6.8)were also analyzed.The results revealed that LE and EE of fibers with Span80decreased with the increase of its concentration.Fibers with coresheath structure had a longer effective release lifetime than without Span80.The increase of Span80 resulted in higher hydrophilicity of fibers and faster release rate of Tet.
基金Biomedical Textile Materials Science and Technology(111 Project),China(No.B07024)
文摘Composite hernia meshes designed in this paper consist of polypropylene( PP) knitted meshes and polycaprolactone( PCL)nanofiber membranes,which are produced by electro-spinning the solution composed of PCL as a solute and the mixture of dimethylformamide( DMF) and dichloromethane( DCM) as a solvent. The morphology and diameter of nanofibers in the membrane are well performed when the 15% PCL solution is electrospun under the condition of 18 k V,15 cm,0. 7 m L/h. The poresize of the membranes is less than 10 μm, where such kinds of arrangement are extremely compact to prevent the cells from growing in. The mechanical properties of the membrane with better arrangement state can reach 68. 8 c N/mm^2. The cytotoxicity test of the composite mesh demonstrates the nontoxicity of the materials.However,the bonding fastness between the membrane and the PP mesh is extremely unsubstantial. The better ways to bond PP mesh with PCL membranes should be discussed in the future.
