基于PD-滑模耦合算法的压电智能薄板颤振抑制

针对工件柔性主导的薄壁件铣削颤振问题,提出了一种基于PD–滑模耦合算法的压电智能薄板颤振抑制方法。首先设计了只需位移测量的主动控制算法,基于滑模控制理论处理系统参数不确定性和外部扰动,通过动态补偿器对未知切削状态进行在线近似和补偿;为解决传感误差和系统时滞问题,在滑模控制器中进一步耦合了时空依变PD控制模型,借助ABAQUS仿真拟合控制参数时变函数;最后设计了一套薄壁件主动控制装置,试验结果显示采用主动控制可有效抑制薄壁件铣削颤振,验证了控制方法的可行性。

Controllable growth of wafer-scale PdS and PdS_(2) nanofilms via chemical vapor deposition combined with an electron beam evaporation technique

Palladium(Pd)-based sulfides have triggered extensive interest due to their unique properties and potential applications in the fields of electronics and optoelectronics.However,the synthesis of large-scale uniform PdS and PdS_(2)nanofilms(NFs)remains an enormous challenge.In this work,2-inch wafer-scale PdS and PdS_(2) NFs with excellent stability can be controllably prepared via chemical vapor deposition combined with electron beam evaporation technique.The thickness of the pre-deposited Pd film and the sulfurization temperature are critical for the precise synthesis of PdS and PdS_(2) NFs.A corresponding growth mechanism has been proposed based on our experimental results and Gibbs free energy calculations.The electrical transport properties of PdS and PdS_(2) NFs were explored by conductive atomic force microscopy.Our findings have achieved the controllable growth of PdS and PdS_(2) NFs,which may provide a pathway to facilitate PdS and PdS_(2) based applications for next-generation high performance optoelectronic devices.

Review of Field Weakening Control Strategies of Permanent Magnet Synchronous Motors

Due to high power density,high efficiency,and accurate control performance,permanent magnet synchronous motors(PMSMs)have been widely adopted in equipment manufacturing and energy transformation fields.To expand the speed range under finite DC-bus voltage,extensive research on field weakening(FW)control strategies has been conducted.This paper summarizes the major FW control strategies of PMSMs,which are categorized into calculation-based methods,voltage closed-loop control methods,and model predictive control related methods.The existing strategies are analyzed and compared according to performance,robustness,and execution difficulty,which can facilitate the implementation of FW control.

欠驱动飞行器横侧向通道的自耦PD控制方法

针对欠驱动高超声速飞行器横侧向通道的姿态控制问题,提出一种基于自耦PD(proportional-differential)控制理论的控制方法.该方法将欠驱动飞行器横侧向姿态模型转换为由速度倾斜角与侧滑角两个通道组成的二阶动态模型,并在速度倾斜角通道中引入一个侧滑角虚拟指令,再对速度倾斜角与侧滑角两个通道的内部动态与外部扰动分别定义两个总扰动,从而将非线性欠驱动扰动系统等价映射为虚拟全驱动线性扰动系统.使用最小速度因子及其自适应速度因子来设计外环速度倾斜角的自耦PD控制器,以便获得侧滑角虚拟指令,并根据该虚拟指令来设计内环侧滑角的自耦PD控制器,从而获得副翼偏角的控制力.分析了自耦PD控制系统的鲁棒稳定性和抗扰动鲁棒性.仿真结果表明,本文设计的自耦PD控制器不仅具有良好的抗扰动鲁棒性,而且具有良好的动态品质和稳态性能.

基于压电叠堆的智能风洞尾支杆结构主动抑振PD参数整定

验证飞行器气动性能往往需要进行风洞全模试验,尾支杆支撑结构设计简单、拆装便捷、对试验流场干扰低,因此全尺寸模型普遍采用尾支杆支撑形式。但其支撑刚度低、结构阻尼小,容易引发支杆-模型系统的振动。本文基于压电叠堆设计了集成于尾支杆根部的智能主动抑振结构,应用改进粒子群算法对工程上常用的比例微分(PD)控制方法进行了整定优化,改善了其参数整定所需时间长、整定效率不高的问题。控制仿真及试验结果表明,采用基于改进粒子群算法的PD控制器可降低振动信号振幅最大值为52%,缩短99.48%的调整时间,抑振效果明显,能够为风洞尾支杆主动控制提供理论及实践参考。

基于自耦PD的四旋翼无人机轨迹跟踪控制

针对输入受限的四旋翼无人机,为了使其能够快速稳定地跟踪期望轨迹,使用了一种基于自耦PD(SCPD)的轨迹跟踪控制方法。该方法将四旋翼无人机系统不确定性和内外扰动等复杂因素定义为总和扰动,进而将非线性不确定系统映射为未知线性系统。根据自耦PID控制理论,为四旋翼无人机位置环和姿态环各控制通道设计了独立的SCPD控制器,并设计了一种基于误差的速度因子模型。以定点悬停、轨迹跟踪等方式,与基于传统PID和滑模控制的飞行控制系统进行了动态响应性能测试和抗干扰性能对比。仿真结果表明:基于SCPD控制的四旋翼飞行控制系统具有较优的动态响应性能和较强的抗干扰能力,验证了SCPD控制旋翼无人机轨迹跟踪的有效性。

基于推挽拓扑的PWM-PD控制多路输出电路研究

概述现行多路输出电路的控制方法,提出一种基于推挽拓扑的脉冲宽度调制-脉冲延时(PWM-PD)控制的类似于单绕组多路输出的电路结构。相较于传统多路输出技术,可以减小变压器体积,节约开关器件及成本。通过Saber仿真验证其具有良好的动态相应和输出稳定性。

Optimal PD/PID control of smart base isolated buildings equipped with piezoelectric friction dampers

Long-period pulses in near-field earthquakes lead to large displacements in the base of isolated structures.To dissipate energy in isolated structures using semi-active control,piezoelectric friction dampers（PFD） can be employed.The performance of a PFD is highly dependent on the strategy applied to adjust its contact force.In this paper,the seismic control of a benchmark isolated building equipped with PFD using PD/PID controllers is developed.Using genetic algorithms,these controllers are optimized to create a balance between the performance and robustness of the closed-loop structural system.One advantage of this technique is that the controller forces can easily be estimated.In addition,the structure is equipped with only a single sensor at the base floor to measure the base displacement.Considering seven pairs of earthquakes and nine performance indices,the performance of the closed-loop system is evaluated.Then,the results are compared with those given by two well-known methods：the maximum possive operation of piezoelectric friction dampers and LQG controllers.The simulation results show that the proposed controllers perform better than the others in terms of simultaneous reduction of floor acceleration and maximum displacement of the isolator.Moreover,they are able to reduce the displacement of the isolator systems for different earthquakes without losing the advantages of isolation.

Dynamics and adaptive control of a dual-arm space robot with closed-loop constraints and uncertain inertial parameters

A dynamics-based adaptive control approach is proposed for a planar dual-arm space robot in the presence of closed-loop constraints and uncertain inertial parameters of the payload. The controller is capable of controlling the po- sition and attitude of both the satellite base and the payload grasped by the manipulator end effectors. The equations of motion in reduced-order form for the constrained system are derived by incorporating the constraint equations in terms of accelerations into Kane＇s equations of the unconstrained system. Model analysis shows that the resulting equations perfectly meet the requirement of adaptive controller design. Consequently, by using an indirect approach, an adaptive control scheme is proposed to accomplish position/attitude trajectory tracking control with the uncertain parameters be- ing estimated on-line. The actuator redundancy due to the closed-loop constraints is utilized to minimize a weighted norm of the joint torques. Global asymptotic stability is proven by using Lyapunov＇s method, and simulation results are also presented to demonstrate the effectiveness of the proposed approach.

Repetitive PD control strategy with inverse transfer function compensation for CVCF inverter

A novel repetitive control strategy for the output waveform of single-phase CVCF inverters is presented. In this scheme, the inverse transfer function of inverter is used as a compensator to obtain stable and satisfy harmonic rejection. Besides, PD controller is adopted to improve transient performance. Simulation and experimental results, which are gotten from a DSP-based 400Hz, 5.5KW inverter, indicate that the proposed control scheme can achieve not only low THD during steady-state operation but also fast transient response during load step change.

N-PD cross-coupling synchronization control based on adjacent coupling error analysis

In order to improve the trajectory tracking precision and reduce the synchronization error of a 6-DOF lightweight robot, nonlinear proportion-deviation （N-PD） cross-coupling synchronization control strategy based on adjacent coupling error analysis is presented. The mathematical models of the robot, including kinematic model, dynamic model and spline trajectory planing, are established and verified. Since it is difficult to describe the real-time contour error of the robot for complex trajectory, the adjacent coupling error is analyzed to solve the problem. Combined with nonlinear control and coupling performance of the robot, N-PD cross-coupling synchronization controller is designed and validated by simulation analysis. A servo control experimental system which mainly consists of laser tracking system, the robot mechanical system and EtherCAT based servo control system is constructed. The synchronization error is significantly decreased and the maximum trajectory error is reduced from 0.33 mm to 0.1 mm. The effectiveness of the control algorithm is validated by the experimental results, thus the control strategy can improve the robot＇s trajectory tracking precision significantly.

A closed-loop particle swarm optimizer for multivariable process controller design

Design of general multivariable process controllers is an attractive and practical alternative to optimizing design by evolutionary algorithms (EAs) since it can be formulated as an optimization problem. A closed-loop particle swarm optimization (CLPSO) algorithm is proposed by mapping PSO elements into the closed-loop system based on control theories. At each time step, a proportional integral (PI) controller is used to calculate an updated inertia weight for each particle in swarms from its last fitness. With this modification, limitations caused by a uniform inertia weight for the whole population are avoided, and the particles have enough diversity. After the effectiveness, efficiency and robustness are tested by benchmark functions, CLPSO is applied to design a multivariable proportional-integral-derivative (PID) controller for a solvent dehydration tower in a chemical plant and has improved its performances.

Decentralized PD Control for Non-uniform Motion of a Hamiltonian Hybrid System

In this paper, a decentralized proportional-derivative （PD） controller design for non-uniform motion of a Hamiltonian hybrid system is considered. A Hamiltonian hybrid system with the capability of producing a non-uniform motion is developed. The structural properties of the system are investigated by means of the theory of Hamiltonian systems. A relationship between the parameters of the system and the parameters of the proposed decentralized PD controller is shown to ensure local stability and tracking performance. Simulation results are included to show the obtained non-uniform motion.

Application of Single Neuron Adaptive PID Regulators with Auto-tuning Gain in Industrial Parameter(Pressure)Closed-loop Process Control Systems

A type of single neuron adaptive PID regulator with auto-tuning gain is proposed and applied to the work control of fans, waterpumps and air-pressers etc. in Handan Iron & Steel Compel China. The robusthess of induStrial parameter closed-loop process controlsystems is improved, and the work quality of the systems bettered.

全向移动机器人的神经滑模自适应PD跟踪控制

针对四轮全向机器人数学模型中未知因数的干扰,提出了一种基于神经滑模的比例微分(Proportional plus Derivative,PD)自适应跟踪控制策略。首先,对机器人的动力学模型进行分析;其次,利用反步轨迹跟踪控制器得到虚拟速度,基于虚拟输入与实际输入的误差设计PD控制器;接着,采用神经网络来逼近动力学模型中的不确定性,并利用Lyapunov定理证明了系统的稳定性。仿真和实验结果表明,该控制策略具有有效性。

Solving position-posture deviation problem of multi-legged walking robots with semi-round rigid feet by closed-loop control

The semi-round rigid feet would cause position-posture deviation problem because the actual foothold position is hardly known due to the rolling effect of the semi-round rigid feet during the robot walking. The position-posture deviation problem may harm to the stability and the harmony of the robot, or even makes the robot tip over and fail to walk forward. Focused on the position-posture deviation problem of multi-legged walking robots with semi-round rigid feet, a new method of position-posture closed-loop control is proposed to solve the position-posture deviation problem caused by semi-round rigid feet, based on the inverse velocity kinematics of the multi-legged walking robots. The position-posture closed-loop control is divided into two parts: the position closed-loop control and the posture closed-loop control. Thus, the position-posture control for the robot which is a tight coupling and nonlinear system is decoupled. Co-simulations of position-posture open-loop control and position-posture closed-loop control by MATLAB and ADAMS are implemented, respectively. The co-simulation results verify that the position-posture closed-loop control performs well in solving the position-posture deviation problem caused by semi-round rigid feet.

Interference Management for DS-CDMA Systems through Closed-Loop Power Control, Base Station Assignment, and Beamforming

In this paper, we propose a smart step closed-loop power control (SSPC) algorithm and a base station assignment method based on minimizing the transmitter power (BSA-MTP) technique in a direct sequence-code division multiple access (DS-CDMA) receiver with frequency-selective Rayleigh fading. This receiver consists of three stages. In the first stage, with constrained least mean squared (CLMS) algorithm, the desired users’ signal in an arbitrary path is passed and the inter-path interference (IPI) is reduced in other paths in each RAKE finger. Also in this stage, the multiple access interference (MAI) from other users is reduced. Thus, the matched filter (MF) can use for more reduction of the IPI and MAI in each RAKE finger in the second stage. Also in the third stage, the output signals from the matched filters are combined according to the conventional maximal ratio combining (MRC) principle and then are fed into the decision circuit of the desired user. The simulation results indicate that the SSPC algorithm and the BSA-MTP technique can significantly reduce the network bit error rate (BER) compared to the other methods. Also, we observe that significant savings in total transmit power (TTP) are possible with our methods.

基于改进模糊自适应补偿的柔性关节机器人PD控制

针对柔性关节机器人具有不确定性、轨迹跟踪精度低和抖动的问题,提出一种改进模糊自适应补偿的PD控制方法。该方法在原有模糊自适应控制和PD控制的基础上进行改进,采用改进模糊自适应控制对PD控制进行补偿,以提高存在不确定性条件下的关节轨迹跟踪精度并抑制抖动。通过Lyapunov理论证明了系统的稳定性。仿真结果表明:新型控制器具有良好的自适应能力,与传统PD控制和模糊自适应控制相比,新型控制策略显著提高了关节的轨迹跟踪精度并在一定程度上抑制了关节抖动。

Fast Ferry Smoothing Motion via Intelligent PD Controller

A novel type of control law was adopted to reduce the vertical acceleration of a fast ferry as well as the motion sickness incidence suffered by the passengers onboard by means of a submerged T-foil.Considering the system changing characteristics under high disturbances,a model-free approach was adopted.In addition,an upgraded proportional-derivative(PD)controller with correction terms resulting from a fast-online estimation of the system dynamics was designed.The overall controller,known as intelligent PD(i-PD)controller,was tested,and the obtained results were compared with those of a classic PD controller.The controllers were also tested in a changing environment and at different operating velocities.The results confirmed the effectiveness of the i-PD controller to smooth the motions with low computational cost control schemes.Furthermore,thanks to ability of the i-PD controller to continually update the estimated dynamics of the system,it showed a better reduction in both vertical motions and the seasickness level of the passengers with the needed robustness under external disturbances and system changing parameters.

Research of the algorithm of the closed-loop control system to control the piezoelectric actuator

The piezoelectric actuator has been widely used in precision instruments and precision control. However, hysteresis, nonlinearity and creep exist in the actuator, which limit actuator applications and affect accuracy. This thesis introduces fuzzy control as the algorithm of a closed-loop control system to control the piezoelectric actuator. Fuzzy control can make this closed-looped system not only have high linearity, repeatability, accuracy and few overshoot, but isalso easily used.