Analysis and Control of Novel Deflection-Type PM Multi-DOF Actuator

This paper mainly presents a PM multi-DOF actuator for robot in-wheels drive applications and its control method. The torque model is established based on the finite-element model of the single pair poles in 3D finite element method software. Due to the special structure of the actuator,the Euler angles are adopted for deriving the kinematics and dynamic model. To reduce the effects of uncertainties of modeling error,nonlinear friction and external disturbances in the system,an approximation of neural network adaptive control method is applied to the actuator. The computation and simulation results show that the proposed analysis and control method can effectively derive the characteristics and improve the motion performance,which provides the primary theoretical guide for the configuration design,optimization and control research of multi-DOF deflection type actuators.

Methods for Force Analysis of Overconstrained Parallel Mechanisms： A Review

The force analysis of overconstrained PMs is relatively complex and difficult, for which the methods have always been a research hotspot. However, few liter- atures analyze the characteristics and application scopes of the various methods, which is not convenient for researchers and engineers to master and adopt them prop- erly. A review of the methods for force analysis of both passive and active overconstrained PMs is presented. The existing force analysis methods for these two kinds of overconstrained PMs are classified according to their main ideas. Each category is briefly demonstrated and evaluated from such aspects as the calculation amount, the compre- hensiveness of considering limbs＇ deformation, and the existence of explicit expressions of the solutions, which provides an important reference for researchers and engi- neers to quickly find a suitable method. The similarities and differences between the statically indeterminate prob- lem of passive overconstrained PMs and that of active overconstrained PMs are discussed, and a universal method for these two kinds of overconstrained PMs is pointed out. The existing deficiencies and development directions of the force analysis methods for overconstrained systems are indicated based on the overview.

Type Synthesis and Dynamics Performance Evaluation of a Class of 5-DOF Redundantly Actuated Parallel Mechanisms

This paper presents a five degree of freedom(5-DOF)redundantly actuated parallel mechanism(PM)for the parallel machining head of a machine tool.A 5-DOF single kinematic chain is evolved into a secondary kinematic chain based on Lie group theory and a configuration evolution method.The evolutional chain and four 6-DOF kinematic chain SPS(S represents spherical joint and P represents prismatic joint)or UPS(U represents universal joint)can be combined into four classes of 5-DOF redundantly actuated parallel mechanisms.That SPS-(2UPR)R(R represents revolute joint)redundantly actuated parallel mechanism is selected and is applied to the parallel machining head of the machine tool.All formulas of the 4SPS-(2UPR)R mechanism are deduced.The dynamic model of the mechanism is shown to be correct by Matlab and automatic dynamic analysis of mechanical systems(ADAMS)under no-load conditions.The dynamic performance evaluation indexes including energy transmission efficiency and acceleration performance evaluation are analyzed.The results show that the 4SPS-(2UPR)R mechanism can be applied to a parallel machining head and have good dynamic performance.