To maximize the benefits of wire arc additive manufacturing(WAAM)processes,the effect of post-deposition heat treatment on the microstructure and mechanical properties of WAAM AZ80M magnesium(Mg)alloy was investigated...To maximize the benefits of wire arc additive manufacturing(WAAM)processes,the effect of post-deposition heat treatment on the microstructure and mechanical properties of WAAM AZ80M magnesium(Mg)alloy was investigated.Three different heat treatment procedures(T4,T5 and T6)were performed.According to the results,after T4 heat treatment,the microsegregation of alloying elements was improved with the eutectic structure dissolved.Samples after T5 heat treatment inherited the net-like distribution of secondary phases similar to the as-deposited sample,where the eutectic structure covering the interdendritic regions and theβ-phase precipitated around the eutectic structure.After T6 heat treatment,the tinyβ-phases re-precipitated from the matrix and distributed in inner and outer of the grains.The hardness distribution of the samples went through T4 and T6 heat treatment was more uniform in comparison to that of T5 heat treated samples.The tensile test showed that the T6 heat treatment improved the strength and ductility,and the anisotropy between horizontal and vertical can be eliminated.Moreover,T4 treated samples exhibited highest ductility.展开更多
M 0.2Ca 0.8TiO 3∶Pr 3+(M=Mg 2+, Sr 2+, Ba 2+, Zn 2+) long persistence red phosphors were prepared by solid state reaction. The influence of the partially replacing Ca 2+ in CaTiO 3 with Mg 2+, Sr 2+, ...M 0.2Ca 0.8TiO 3∶Pr 3+(M=Mg 2+, Sr 2+, Ba 2+, Zn 2+) long persistence red phosphors were prepared by solid state reaction. The influence of the partially replacing Ca 2+ in CaTiO 3 with Mg 2+, Sr 2+, Ba 2+, Zn 2+ on the excitation spectra, the emission spectra and the long persistence properties were studied. The results suggest that certain quantity of Mg 2+, Sr 2+, Ba 2+, Zn 2+ which partially replace Ca 2+ can enhance the luminescent intensity and prolong the afterglow persistence of the samples. The intensity of Mg 0.2Ca 0.8TiO 3∶Pr 3+ is above all of the samples. Take Mg 0.2Ca 0.8TiO 3∶Pr 3+ as the basic sample, the influence of Pr 3+ concentrations (C(Pr 3+)) on the long afterglow properties were also studied. The results suggest that when the C(Pr 3+) is 0.10% (mol fraction) the intensity of the sample is the highest. The excitation spectra of all these samples show broad band spectra ranging from 300～500 nm peaking at about 342 nm. The emission spectra also exhibit a broad band peaking at 613 nm (CaTiO 3∶Pr 3+ is 612 nm). XRD research indicates that the crystalline phases change due to the replacement of divalent metal ions.The research on the thermoluminescence spectra of Mg 0.2Ca 0.8TiO 3∶Pr 3+ indicates that the peak is at 107.35 ℃ and the depth of the trap energy is about 0 852 eV.展开更多
Rapid prototype manufacturing(RPM) is a new advanced manufacturing technology, which is based on the philosophy of materials increasing of lay by lay forming. Zero adventure rapid design/manufacturing can be realized ...Rapid prototype manufacturing(RPM) is a new advanced manufacturing technology, which is based on the philosophy of materials increasing of lay by lay forming. Zero adventure rapid design/manufacturing can be realized with rapid prototypes of 3D CAD of products. Rapid prototyping has been an effective tool of R&D of new products. A novel rapid prototyping and manufacturing (RP&M) technique is brought forward. The principle of the process is to form layered sections and to make the prototype or part layer by layer by deflection projection of electric charged powder granules passing through electric or magnetic field and by controllable line and field scan of the powder granule beam. The feasibility issue of the process is theoretically and experimentally investigated.It shows that deflection projection of electric charged powder granules beam passing through electric field can be significant and feasible to the rapid prototyping technique.展开更多
基金the China Scholarship Council[grant numbers:201907000039],the National Key Research and Development Plan of China[grant number 2017YFB0305905]The authors acknowledge the financial support from the 2020 open projects[grant numbers:KLATM202003]of Key laboratory of Advanced Technologies of Materials,Ministry of Education China,Southwest Jiaotong University。
文摘To maximize the benefits of wire arc additive manufacturing(WAAM)processes,the effect of post-deposition heat treatment on the microstructure and mechanical properties of WAAM AZ80M magnesium(Mg)alloy was investigated.Three different heat treatment procedures(T4,T5 and T6)were performed.According to the results,after T4 heat treatment,the microsegregation of alloying elements was improved with the eutectic structure dissolved.Samples after T5 heat treatment inherited the net-like distribution of secondary phases similar to the as-deposited sample,where the eutectic structure covering the interdendritic regions and theβ-phase precipitated around the eutectic structure.After T6 heat treatment,the tinyβ-phases re-precipitated from the matrix and distributed in inner and outer of the grains.The hardness distribution of the samples went through T4 and T6 heat treatment was more uniform in comparison to that of T5 heat treated samples.The tensile test showed that the T6 heat treatment improved the strength and ductility,and the anisotropy between horizontal and vertical can be eliminated.Moreover,T4 treated samples exhibited highest ductility.
文摘M 0.2Ca 0.8TiO 3∶Pr 3+(M=Mg 2+, Sr 2+, Ba 2+, Zn 2+) long persistence red phosphors were prepared by solid state reaction. The influence of the partially replacing Ca 2+ in CaTiO 3 with Mg 2+, Sr 2+, Ba 2+, Zn 2+ on the excitation spectra, the emission spectra and the long persistence properties were studied. The results suggest that certain quantity of Mg 2+, Sr 2+, Ba 2+, Zn 2+ which partially replace Ca 2+ can enhance the luminescent intensity and prolong the afterglow persistence of the samples. The intensity of Mg 0.2Ca 0.8TiO 3∶Pr 3+ is above all of the samples. Take Mg 0.2Ca 0.8TiO 3∶Pr 3+ as the basic sample, the influence of Pr 3+ concentrations (C(Pr 3+)) on the long afterglow properties were also studied. The results suggest that when the C(Pr 3+) is 0.10% (mol fraction) the intensity of the sample is the highest. The excitation spectra of all these samples show broad band spectra ranging from 300～500 nm peaking at about 342 nm. The emission spectra also exhibit a broad band peaking at 613 nm (CaTiO 3∶Pr 3+ is 612 nm). XRD research indicates that the crystalline phases change due to the replacement of divalent metal ions.The research on the thermoluminescence spectra of Mg 0.2Ca 0.8TiO 3∶Pr 3+ indicates that the peak is at 107.35 ℃ and the depth of the trap energy is about 0 852 eV.
文摘Rapid prototype manufacturing(RPM) is a new advanced manufacturing technology, which is based on the philosophy of materials increasing of lay by lay forming. Zero adventure rapid design/manufacturing can be realized with rapid prototypes of 3D CAD of products. Rapid prototyping has been an effective tool of R&D of new products. A novel rapid prototyping and manufacturing (RP&M) technique is brought forward. The principle of the process is to form layered sections and to make the prototype or part layer by layer by deflection projection of electric charged powder granules passing through electric or magnetic field and by controllable line and field scan of the powder granule beam. The feasibility issue of the process is theoretically and experimentally investigated.It shows that deflection projection of electric charged powder granules beam passing through electric field can be significant and feasible to the rapid prototyping technique.
