Bio-based removable pressure-sensitive adhesives derived from carboxyl-terminated polyricinoleate and epoxidized soybean oil

A novel kind of fully bio-based PSAs we re obtained through the curing reaction between two components derived from the plant oils:carboxyl-terminated polyricinoleate(PRA) fro m the castor oil and epoxidized soybean oil(ESO).The get content,glass transition temperature(Tg),rheological behavior,tensile strength,creep resistance and 180° peel strength of the PSAs were feasibly tailored by adjusting the component ratio of ESO to PRA.At low cross-linking level,the PSAs behaved like a viscous liquid and did not possess enough cohesiveness to sustain the mechanical stress during peeling,The PSAs cross-linked at or near the optimal stoichiometric conditions displayed an adhesive(interfacial) failure between the substrate and the adhesive layer,which were associated with the lowest adhesion levels.The PSAs with the dosage amount of ESO ranging from 10.20 wt% were tacky and flexible,which exhibited 1800 peel strength ranging from 0.4~2.3 N/cm;and could be easily removed without any residues on the adherend.The process for the preparation of the fully bio-based PSAs was environmentally friendly without using any orga nic solve nt or other toxic chemical,herein showing the great potential as sustainable materials.

SEED SEMICONTINUOUS EMULSION MULTI-COPOLYMERIZATION OF (METH) ACRYLATES WITH HIGH-SOLID CONTENT: EFFECT OF THE OPERATION CONDITIONS

The seeded semicontinuous emulsion multi-copolymerization of butyl acrylate (BA), 2-ethylhexyl acrylate (2EHA), methyl methacrylate (MMA), 2-hydroxyl propyl acrylate (HOPA) and acrylic acid (AA) was used to prepare the acrylic latexes with high-solid content. The effects of monomer emulsion feed rates (R(a)) and (R/E)(E) values, the ratio of emulsifier amount between the initial charge (R) and the addition monomer emulsion (E), on the polymerization reaction features, the viscosities, surface tensions,particle sizes and particle sizes distributions of latexes, T-g and the insoluble fractions of films, the 180 degrees peel strength, tack and holding power of pressure-sensitive adhesive (PSA) tapes, prepared from the latexes, were studied. Experimental study shows that the grafting and crosslinking fraction in the PSA tapes must be controlled within a suitable range to keep the balance of the 180 degrees peel strength, tack and holding power.

Mechanistic insights of the controlled release capacity of polar functional group in transdermal drug delivery system:the relationship of hydrogen bonding strength and controlled release capacity

Background:Hydrogen bonding interaction was considered to play a critical role in controlling drug release from transdermal patch.However,the quantitative evaluation of hydrogen bonding strength between drug and polar functional group was rarely reported,and the relationship between hydrogen bonding strength and controlled release capacity of pressure sensitive adhesive(PSA)was not well understood.The present study shed light on this relationship.Methods:Acrylate PSAs with amide group were synthesized by a free radical-initiated solution polymerization.Six drugs,i.e.,etodolac,ketoprofen,gemfibrozil,zolmitriptan,propranolol and lidocaine,were selected as model drugs.In vitro drug release and skin permeation experiments and in vivo pharmacokinetic experiment were performed.Partial correlation analysis,fourier-transform infrared spectroscopy and molecular simulation were conducted to provide molecular details of drug-PSA interactions.Mechanical test,rheology study,and modulated differential scanning calorimetry study were performed to scrutinize the free volume and molecular mobility of PSAs.Results:Release rate of all six drugs from amide PSAs decreased with the increase of amide group concentrations;however,only zolmitriptan and propranolol showed decreased skin permeation rate.It was found that drug release was controlled by amide group through hydrogen bonding,and controlled release extent was positively correlated with hydrogen bonding strength.Conclusion:From these results,we concluded that drugs with strong hydrogen bond forming ability and high skin permeation were suitable to use amide PSAs to regulate their release rate from patch.