Coesite inclusions are found in kyanite from the Lanshantou eclogite in the Sulu ultrahigh-pressure (UHP) metamorphic belt. This discovery extends the stable region of kyanite to over 2.4 GPa. As an important UHP meta...Coesite inclusions are found in kyanite from the Lanshantou eclogite in the Sulu ultrahigh-pressure (UHP) metamorphic belt. This discovery extends the stable region of kyanite to over 2.4 GPa. As an important UHP metamorphic belt in China, the Sulu eclogite belt is the product of A-subduction induced by strong compression of the Yellow Sea terrane to the Jiaodong-northereastern Jiangsu terrane during the interaction of the Eurasian plate and Palaeo-Pacific plate in the Indosinian. It stretches about 350 km and contains over 1000 eclogite bodies. Most eclogites in this belt belong to Groups B and C in the classification of Coleman et al., and commonly contain kyanite, while the Lanshantou eclogite belongs to Group A and contains coesite. The MgO, CaO and FeO contents in garnet and pyroxene show regular variation from the core to the rim, which reveals the PTt paths of progressive metamorphism during the Early Mesozoic (240-200 Ma) and retrogressive metamorphism during the Late Mesozoic and Cenozoic exhumation.展开更多
: The kinematic vorticity number and strain of the mylonitic zone related to the detachment fault increase from ESE to WNW along the moving direction of the upper plate of the Xiaoqinling metamorphic core complex (XMC...: The kinematic vorticity number and strain of the mylonitic zone related to the detachment fault increase from ESE to WNW along the moving direction of the upper plate of the Xiaoqinling metamorphic core complex (XMCC) and the geometry of quartz c-axis fabrics changes progressively from crossed girdles to single girdles in the same direction. Therefore, pure shear is dominant in the ESE part of the XMCC while simple shear becomes increasingly important towards WNW. However, the shear type does not change with the strain across the shear zone, thus the variation of shear type is of significance in indicating the formation mechanism. The granitic plutons within the XMCC came from the deep source and their emplacement was an active and forceful upwelling prior to the detachment faulting. The PTt path demonstrates that magmatism is an important cause for the formation of the XMCC. The formation mechanism of the XMCC is supposed to be active plutonism and passive detachment. Crustal thickening and magmatic doming caused necking extension with pure shear, and magmatic heating and doming resulted in detachment extension with simple shear and formed the XMCC.展开更多
The Qinling-Dabie-Sulu high-pressure and ultra-high pressure metamorphic belt wasformed by subduction and collision between the North China and Yangtze plates. The study ofthe eclogite belt is very important in unders...The Qinling-Dabie-Sulu high-pressure and ultra-high pressure metamorphic belt wasformed by subduction and collision between the North China and Yangtze plates. The study ofthe eclogite belt is very important in understanding the evolution of the Qinling Dabie orogen. Inthe present paper the geology, petrology, minerology and chronology of the eclogites in the Dabieand Sulu areas are described. The principal conclusions of this work are as follows: (1) Based up-on the field occurrence and the P-T conditions of the eclogites, two types of eclogite can be dis-tinguished: Type 1—the low-temperature and high-pressure eclogite in the mid-late Proterozoicmetamorphic series, and Type 2—the ultra-high pressure eclogite in the late Archaean to earlyProterozoic metamorphic complex. In the Dabie area, the ultra-high-pressure eclogite,high-pressure eclogite and epidote-blueschist units are nearly parallel to each other and stretchintermittently from north to south. (2) The P-T conditions of the high-pressure eclogites and ul-tra-high pressure eclogites have been estimated. The former are formed at 450-550℃ and1.4-1.6 GPa; while the latter at 650-870℃ and >2.7-2.9 GPa in the Dabie area and at820-1000℃ and >2.8-3.1 GPa in the Sulu area. The metamorphic temperatures of the eclogitesincrease progressively from west to east. (3) The ultra-high pressure eclogites were subjected to 5stages of metamorphism: pre-eclogite epidote amphibolite facies, peak coesite eclogite facies,post-eclogite amphibolite facies, epidote-blueschist facies or epidote amphibolite facies andgreenschist facies. The general features of the PTt path of the ultra-high pressure eclogite are:clockwise pattern, progressive metamorphism being a process of slow increasing temperature andrapid increasing pressure, and the retrogressive section with nearly isothermal decompression atthe early stage, isobaric cooling at the middle stage and nearly isothermal decompression at thelate stage. (4) At least two stages of high-pressure metamorphism occurred in the orogenic belt:the high-pressure eclogite and ultra-high pressure eclogite were formed by the subduction of theoceanic crust northward beneath the North China plate or the Dabie block during theCaledonian; while the epidote-blueschist belt came into being by subdution and collision be-tween the two continental plates during the Indosinian. (5) Due to the continuous sequentialsubduction of the cold plate, the ultra high-presssure metamorphic rocks were uplifted to thecrust by the underplating processes. They can be preserved just because of the 'frozen effect' re-sulting from the continuous subduction of the cold plate. (6) The carbonates, such as magnesite,breunnerite, aragonite and dolomite, and the H_2O-bearing minerals, such as phengite, epidoteand zoisite, were stable during the high-pressure and/or ultra-high pressure metamorphism.展开更多
Yanshanian igneous rocks in the East China, on an orogenic belt scale, are characterized by the continental marginal arc in petrology and geochemistry as Andes and West USA, except for the Hercyn type biotite two mi...Yanshanian igneous rocks in the East China, on an orogenic belt scale, are characterized by the continental marginal arc in petrology and geochemistry as Andes and West USA, except for the Hercyn type biotite two mica muscovite granite belt in the Nanling region. Three segments of the Yanshanian igneous rocks along the belt are recognized. In terms of magma tectonic event sequence, the north, middle and south segments have counter clockwise (ccw), clockwise (cw) and ccw+cw pTt paths of the orogenic process, respectively. A genetic model of the lithospheric delamination (loss of the lithospheric root in about 120 km) in combination with the oceanic subduction for the Yanshanian Andes like orogenic belt and both the crust and lithosphere thickening for the Yanshanian Hercyn type Nanling orogenic belt in the East China is suggested.展开更多
The Qinling orogenic belt is a collision zone between the North China and Yangtze cratons. The Qinling Complex is a Precambrian metamorphic complex, developed in the inner zone of the orogenic belt , which records the...The Qinling orogenic belt is a collision zone between the North China and Yangtze cratons. The Qinling Complex is a Precambrian metamorphic complex, developed in the inner zone of the orogenic belt , which records the metamorphic and deformational history and PTt path of the regional meta-morphism of the collision zone . The present paper studies the metamorphic and deformational history and the PTt path of various tectono-metamorphic cycles in order to describe the geodynamic processes prevailing in that part of the Qinling orogenic belt since Proterozoic.The tectonometamorphic history and evolution of the Qinling Complex is divided into two stages: the stage of formation and the stage of modification During the stage of formation dated as Proterozoic,three deformational sequences are recognized. The amphibolite facies regional metamorphism is earlier than or synchronous with the first or second phase of folding. Three metamorphic zones, i.e. And-Ms ,Sil- Ms, Sil Kfs are delimited. During the stage of modification , the emplacement of Caledonian granite , superimposed thermal aureole (garnet K feldspar zone )and the development of ductile shear zones are major events.Metamorphic reactions are reconstructed in terms of analysis of re-equilibrium textures. Geothermobarometric calculations are conducted to calibrate the PT conditions of metamorphism .The metamorphic PTt paths have been estabh'shed. The PTt path of the Proterozoic tectonometamorphic cycle shows a clockwise pattern and is characterized by prominent decompression. The PTt path of the Caledonian tectonometamorphic cycle is characterized first by PT rising ,then isothermal decompression (rapid uplift), and finally by isobaric cooling The PTt path of the two tectonometamorphic cycles evidence the geodynamic processes: two major stages of collision and uplift in the Proterozoic and Caledonian Hercynian periods, respectively, during the evolution of Qinling orogenic belt.展开更多
文摘Coesite inclusions are found in kyanite from the Lanshantou eclogite in the Sulu ultrahigh-pressure (UHP) metamorphic belt. This discovery extends the stable region of kyanite to over 2.4 GPa. As an important UHP metamorphic belt in China, the Sulu eclogite belt is the product of A-subduction induced by strong compression of the Yellow Sea terrane to the Jiaodong-northereastern Jiangsu terrane during the interaction of the Eurasian plate and Palaeo-Pacific plate in the Indosinian. It stretches about 350 km and contains over 1000 eclogite bodies. Most eclogites in this belt belong to Groups B and C in the classification of Coleman et al., and commonly contain kyanite, while the Lanshantou eclogite belongs to Group A and contains coesite. The MgO, CaO and FeO contents in garnet and pyroxene show regular variation from the core to the rim, which reveals the PTt paths of progressive metamorphism during the Early Mesozoic (240-200 Ma) and retrogressive metamorphism during the Late Mesozoic and Cenozoic exhumation.
文摘: The kinematic vorticity number and strain of the mylonitic zone related to the detachment fault increase from ESE to WNW along the moving direction of the upper plate of the Xiaoqinling metamorphic core complex (XMCC) and the geometry of quartz c-axis fabrics changes progressively from crossed girdles to single girdles in the same direction. Therefore, pure shear is dominant in the ESE part of the XMCC while simple shear becomes increasingly important towards WNW. However, the shear type does not change with the strain across the shear zone, thus the variation of shear type is of significance in indicating the formation mechanism. The granitic plutons within the XMCC came from the deep source and their emplacement was an active and forceful upwelling prior to the detachment faulting. The PTt path demonstrates that magmatism is an important cause for the formation of the XMCC. The formation mechanism of the XMCC is supposed to be active plutonism and passive detachment. Crustal thickening and magmatic doming caused necking extension with pure shear, and magmatic heating and doming resulted in detachment extension with simple shear and formed the XMCC.
文摘The Qinling-Dabie-Sulu high-pressure and ultra-high pressure metamorphic belt wasformed by subduction and collision between the North China and Yangtze plates. The study ofthe eclogite belt is very important in understanding the evolution of the Qinling Dabie orogen. Inthe present paper the geology, petrology, minerology and chronology of the eclogites in the Dabieand Sulu areas are described. The principal conclusions of this work are as follows: (1) Based up-on the field occurrence and the P-T conditions of the eclogites, two types of eclogite can be dis-tinguished: Type 1—the low-temperature and high-pressure eclogite in the mid-late Proterozoicmetamorphic series, and Type 2—the ultra-high pressure eclogite in the late Archaean to earlyProterozoic metamorphic complex. In the Dabie area, the ultra-high-pressure eclogite,high-pressure eclogite and epidote-blueschist units are nearly parallel to each other and stretchintermittently from north to south. (2) The P-T conditions of the high-pressure eclogites and ul-tra-high pressure eclogites have been estimated. The former are formed at 450-550℃ and1.4-1.6 GPa; while the latter at 650-870℃ and >2.7-2.9 GPa in the Dabie area and at820-1000℃ and >2.8-3.1 GPa in the Sulu area. The metamorphic temperatures of the eclogitesincrease progressively from west to east. (3) The ultra-high pressure eclogites were subjected to 5stages of metamorphism: pre-eclogite epidote amphibolite facies, peak coesite eclogite facies,post-eclogite amphibolite facies, epidote-blueschist facies or epidote amphibolite facies andgreenschist facies. The general features of the PTt path of the ultra-high pressure eclogite are:clockwise pattern, progressive metamorphism being a process of slow increasing temperature andrapid increasing pressure, and the retrogressive section with nearly isothermal decompression atthe early stage, isobaric cooling at the middle stage and nearly isothermal decompression at thelate stage. (4) At least two stages of high-pressure metamorphism occurred in the orogenic belt:the high-pressure eclogite and ultra-high pressure eclogite were formed by the subduction of theoceanic crust northward beneath the North China plate or the Dabie block during theCaledonian; while the epidote-blueschist belt came into being by subdution and collision be-tween the two continental plates during the Indosinian. (5) Due to the continuous sequentialsubduction of the cold plate, the ultra high-presssure metamorphic rocks were uplifted to thecrust by the underplating processes. They can be preserved just because of the 'frozen effect' re-sulting from the continuous subduction of the cold plate. (6) The carbonates, such as magnesite,breunnerite, aragonite and dolomite, and the H_2O-bearing minerals, such as phengite, epidoteand zoisite, were stable during the high-pressure and/or ultra-high pressure metamorphism.
文摘Yanshanian igneous rocks in the East China, on an orogenic belt scale, are characterized by the continental marginal arc in petrology and geochemistry as Andes and West USA, except for the Hercyn type biotite two mica muscovite granite belt in the Nanling region. Three segments of the Yanshanian igneous rocks along the belt are recognized. In terms of magma tectonic event sequence, the north, middle and south segments have counter clockwise (ccw), clockwise (cw) and ccw+cw pTt paths of the orogenic process, respectively. A genetic model of the lithospheric delamination (loss of the lithospheric root in about 120 km) in combination with the oceanic subduction for the Yanshanian Andes like orogenic belt and both the crust and lithosphere thickening for the Yanshanian Hercyn type Nanling orogenic belt in the East China is suggested.
文摘The Qinling orogenic belt is a collision zone between the North China and Yangtze cratons. The Qinling Complex is a Precambrian metamorphic complex, developed in the inner zone of the orogenic belt , which records the metamorphic and deformational history and PTt path of the regional meta-morphism of the collision zone . The present paper studies the metamorphic and deformational history and the PTt path of various tectono-metamorphic cycles in order to describe the geodynamic processes prevailing in that part of the Qinling orogenic belt since Proterozoic.The tectonometamorphic history and evolution of the Qinling Complex is divided into two stages: the stage of formation and the stage of modification During the stage of formation dated as Proterozoic,three deformational sequences are recognized. The amphibolite facies regional metamorphism is earlier than or synchronous with the first or second phase of folding. Three metamorphic zones, i.e. And-Ms ,Sil- Ms, Sil Kfs are delimited. During the stage of modification , the emplacement of Caledonian granite , superimposed thermal aureole (garnet K feldspar zone )and the development of ductile shear zones are major events.Metamorphic reactions are reconstructed in terms of analysis of re-equilibrium textures. Geothermobarometric calculations are conducted to calibrate the PT conditions of metamorphism .The metamorphic PTt paths have been estabh'shed. The PTt path of the Proterozoic tectonometamorphic cycle shows a clockwise pattern and is characterized by prominent decompression. The PTt path of the Caledonian tectonometamorphic cycle is characterized first by PT rising ,then isothermal decompression (rapid uplift), and finally by isobaric cooling The PTt path of the two tectonometamorphic cycles evidence the geodynamic processes: two major stages of collision and uplift in the Proterozoic and Caledonian Hercynian periods, respectively, during the evolution of Qinling orogenic belt.
