Gradient thermal barrier coatings (GTBCs) produced by co-deposition of mixtures ofAl-Al2 O3-YSZ onto metallic bond coat exhibited longer lifetimes than the two-layeredTBCs. The finite element method (FEM) numerical mo...Gradient thermal barrier coatings (GTBCs) produced by co-deposition of mixtures ofAl-Al2 O3-YSZ onto metallic bond coat exhibited longer lifetimes than the two-layeredTBCs. The finite element method (FEM) numerical models were used to investigatestress and strain states in the GTBCs and traditional two-layered TBCs as they cooledto 750℃ from a stress-free state at 850℃.展开更多
β-NiAl is a potential oxidation-resistant coating material to be operated at temperatures above 1 150 ℃. In this paper,β-NiAl coatings with 0-0.5 at% Dy are prepared by electron beam physical vapor deposition （EB-...β-NiAl is a potential oxidation-resistant coating material to be operated at temperatures above 1 150 ℃. In this paper,β-NiAl coatings with 0-0.5 at% Dy are prepared by electron beam physical vapor deposition （EB-PVD）. Transient oxidation behavior of the coatings is investigated. At 1 200 ℃, only stable α-Al2O3 phase is observed on the 0.05 at% doped coating, whereas the phase transfomlation from θ-Al2O3 to α-Al2O3 occurs in the 0.5 at% Dy doped coating during 1 h oxidation. At 1 100 ℃, all the coatings reveal the transient transformation of θ-α in the early 15 min and the transformation for the 0.05 at% Dy doped coating is completed within 45 min, much earlier than that for the 0.5 at% Dy doped coating. Overdoping of Dy retards the transformation of θ-α. The undoped and overdoped coatings reveal the whisker structure of θ-Al2O3 even after 20 h oxidation at 1 100 ℃, while the 0.05 at% Dy coating reveals typical granulated structure of α-Al2O3.展开更多
A complex seepage flow field with unknown free surface was formed in the Shanghai Laogang Municipal Solid Waste （MSW） Landfill by the perimeter cut-off wall around the landfill site and the Prefabricated Vertical Dr...A complex seepage flow field with unknown free surface was formed in the Shanghai Laogang Municipal Solid Waste （MSW） Landfill by the perimeter cut-off wall around the landfill site and the Prefabricated Vertical Drains （PVD） in the foundation of landfill. First, the equivalent vertical permeability was presented based on the drainage mechanism of PVD and the related calculation method was studied to macroscopically reflect the impact of PVD on the seepage flow status of the landfill foundation. With the influence of the cut-off wall and the PVD on the infiltration of groundwater, the total inflow was classified into two parts： the lateral inflow through the cut-off wall outside the landfill, and the upward infiltration through the PVD from the foundation of the landfill. Seepage analysis was conducted using the finite element method according to the actual scenario of Laogang Landfill, and the lateral infiltration and the upward infiltration were calculated, respectively. The results show that the total inflow into the landfill area was mostly supplied by the upward infiltration through the PVD and the perimeter cut-off wall was significantly effective to depressurize the seepage pressure and to reduce the flow rate.展开更多
基金sponsored by the National Natural Science Foundation of China(NSFC)Specialized Research Fund for the Doctoral Program of Higher Education of China(SRFDP).
文摘Gradient thermal barrier coatings (GTBCs) produced by co-deposition of mixtures ofAl-Al2 O3-YSZ onto metallic bond coat exhibited longer lifetimes than the two-layeredTBCs. The finite element method (FEM) numerical models were used to investigatestress and strain states in the GTBCs and traditional two-layered TBCs as they cooledto 750℃ from a stress-free state at 850℃.
基金National Natural Science Foundation of China （50771009, 50731001） National Basic Research Program of China （2010CB631200） Research Fund for the Doctoral Program of Higher Education of China （20070006017）
文摘β-NiAl is a potential oxidation-resistant coating material to be operated at temperatures above 1 150 ℃. In this paper,β-NiAl coatings with 0-0.5 at% Dy are prepared by electron beam physical vapor deposition （EB-PVD）. Transient oxidation behavior of the coatings is investigated. At 1 200 ℃, only stable α-Al2O3 phase is observed on the 0.05 at% doped coating, whereas the phase transfomlation from θ-Al2O3 to α-Al2O3 occurs in the 0.5 at% Dy doped coating during 1 h oxidation. At 1 100 ℃, all the coatings reveal the transient transformation of θ-α in the early 15 min and the transformation for the 0.05 at% Dy doped coating is completed within 45 min, much earlier than that for the 0.5 at% Dy doped coating. Overdoping of Dy retards the transformation of θ-α. The undoped and overdoped coatings reveal the whisker structure of θ-Al2O3 even after 20 h oxidation at 1 100 ℃, while the 0.05 at% Dy coating reveals typical granulated structure of α-Al2O3.
基金Project supported by the National Natural Science Foundation of China (Grant No: 40201024)
文摘A complex seepage flow field with unknown free surface was formed in the Shanghai Laogang Municipal Solid Waste （MSW） Landfill by the perimeter cut-off wall around the landfill site and the Prefabricated Vertical Drains （PVD） in the foundation of landfill. First, the equivalent vertical permeability was presented based on the drainage mechanism of PVD and the related calculation method was studied to macroscopically reflect the impact of PVD on the seepage flow status of the landfill foundation. With the influence of the cut-off wall and the PVD on the infiltration of groundwater, the total inflow was classified into two parts： the lateral inflow through the cut-off wall outside the landfill, and the upward infiltration through the PVD from the foundation of the landfill. Seepage analysis was conducted using the finite element method according to the actual scenario of Laogang Landfill, and the lateral infiltration and the upward infiltration were calculated, respectively. The results show that the total inflow into the landfill area was mostly supplied by the upward infiltration through the PVD and the perimeter cut-off wall was significantly effective to depressurize the seepage pressure and to reduce the flow rate.
