Tensile Fractures and in situ Stress Measurement Data Constraints on Cretaceous-Present Tectonic Stress Field Evolution of the Tanlu Fault Zone in Shandong Province,North China Craton

Tectonic stress fields are the key drivers of tectonic events and the evolution of regional structures.The tectonic stress field evolution of the Tanlu fault zone in Shandong Province,located in the east of the North China Craton(NCC),may have preserved records of the NCC’s tectonic history.Borehole television survey and hydraulic fracturing were conducted to analyze the paleo and present tectonic stress fields.Three groups of tensile fractures were identified via borehole television,their azimuths being NNW-SSE,NW-SE and NE-SW,representing multiple stages of tectonic events.Hydraulic fracturing data indicates that the study region is experiencing NEE-SWW-oriented compression and nearly-N-Soriented extension,in accordance with strike-slip and compression.Since the Cretaceous,the orientation of the extensional stress has evolved counterclockwise and sequentially from nearly-NW-SE-oriented to NE-SW-oriented and even nearly N-S-oriented,the stress state having transitioned from strike-slip-extension to strike-slip-compression,in association with the rotating and oblique subduction of the Pacific Plate beneath the NCC,with the participation of the Indian Plate.

Geodetic constraints on contemporary three-dimensional crustal deformation in the Laji Shan—Jishi Shan tectonic belt

The Laji Shan—Jishi Shan tectonic belt(LJTB),located in the southern part of the northeastern Tibetan Plateau(NETP),is a tectonic window to reveal regional tectonic deformation in the NETP.However,its kinematics in the Holocene remains controversial.We obtain the latest and dense horizontal velocity field based on data collected from our newly constructed and existing GNSS stations.Combined with fault kinematics from geologic observations,we analyze the crustal deformation characteristics along the LJTB.The results show that:(1)The Laji Shan fault(LJF)is inactive,and the northwest-oriented Jishi Shan fault(JSF)exhibits a significant dextral and thrust slip.(2)The transpression along the arc-shaped LJTB accommodates deformation transformation between the dextral Riyue Shan fault and the sinistral west Qinling fault.(3)With the continuous pushing of the Indian plate,internal strains in the Tibetan Plateau are continuously transferred in the northeast via the LJTB as they are gradually dissipated near the LJTB and translated into significant crustal uplift in these regions.

Active Faulting Pattern,Present-day Tectonic Stress Field and Block Kinematics in the East Tibetan Plateau

This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region. It shows that the East Tibetan Plateau is dominated by strike-slip and reverse faulting stress regimes and that the maximum horizontal stress is roughly consistent with the contemporary velocity field, except for the west Qinling range where it parallels the striking of the major strike-slip faults. Active tectonics in the East Tibetan Plateau is characterized by three faulting systems. The left-slip Kunlun-Qinling faulting system combines the east Kunlun fault zone, sinistral oblique reverse faults along the Minshan range and two major NEE-striking faults cutting the west Qinling range, which accommodates eastward motion, at 10--14 mm/a, of the Chuan-Qing block. The left-slip Xianshuihe faulting system accommodated clockwise rotation of the Chuan-Dian block. The Longmenshan thrust faulting system forms the eastern margin of the East Tibetan Plateau and has been propagated to the SW of the Sichuan basin. Crustal shortening across the Longmenshan range seems low （2-4 mm/a） and absorbed only a small part of the eastward motion of the Chuan-Qing block. Most of this eastward motion has been transmitted to South China, which is moving SEE-ward at 7-9 mm/a. It is suggested from geophysical data interpretation that the crust and lithosphere of the East Tibetan Plateau is considerably thickened and theologically layered. The upper crust seems to be decoupled from the lower crust through a decollement zone at a depth of 15-20 kin, which involved the Longmenshan fault belt and propagated eastward to the SW of the Sichuan basin. The Wenchuan earthquake was just formed at the bifurcated point of this decollement system. A rheological boundary should exist beneath the Longmenshan fault belt where the lower crust of the East Tibetan Plateau and the lithospheric mantle of the Yangze block are juxtaposed.

Contemporary tectonic stress field in China

The contemporary tectonic stress field in China is obtained on the basis of Chinese stress field database and Harvard CMT catalogue. Result of the inverted tectonic stresses shows that the maximum principal stress axis strikes nearly north-south direction in the west part of Tibet plateau, ENE direction in North China. In Central China, its strikes show a ra- diated pattern, i.e., NNE in north part and NNW in south part. The detailed stress field parameters of nearly whole China are given and can be used in geodynamic stress field simulation and earthquake prediction.

Simulation of Paleotectonic Stress Fields and Distribution Prediction of Tectonic Fractures at the Hudi Coal Mine, Qinshui Basin

Study on tectonic fractures based on the inversion of tectonic stress fields is an effective method. In this study, a geological model was set up based on geological data from the Hudi Coal Mine, Qinshui Basin, a mechanical model was established under the condition of rock mechanics and geostress, and the finite element method was used to simulate the paleotectonic stress field. Based on the Griffith and Mohr-Coulomb criterion, the distribution of tectonic fractures in the Shanxi Formation during the Indosinian, Yanshanian, and Himalayan period can be predicted with the index of comprehensive rupture rate. The results show that the acting force of the Pacific Plate and the India Plate to the North China Plate formed the direction of principal stress is N-S, NW - SE, and NE - SW, respectively, in different periods in the study area. Changes in the direction and strength of the acting force led to the regional gradients of tectonic stress magnitude, which resulted in an asymmetrical distribution state of the stress conditions in different periods. It is suggested that the low-stress areas are mainly located in the fault zones and extend along the direction of the fault zones. Furthermore, the high-stress areas are located in the junction of fold belts and the binding site of multiple folds. The development of tectonic fractures was affected by the distribution of stress intensity and the tectonic position of folds and faults, which resulted in some developed areas with level I and II. There are obvious differences in the development of tectonic fractures in the fold and fault zones and the anticline and syncline structure at the same fold zones. The tectonic fractures of the Shanxi Formation during the Himalayan period are more developed than those during the Indosinian and Yanshanian period due to the superposition of the late tectonic movement to the early tectonic movement and the differences in the magnitude and direction of stress intensity.

The Relationship between Fractures and Tectonic Stress Field in the Extra Low-Permeability Sandstone Reservoir at the South of Western Sichuan Depression

The formation and distribution of fractures are controlled by paleotectonic stress field, and their preservative status and effects on development are dominated by the modern stress field. Since Triassic, it has experienced four tectonic movements and developed four sets of tectonic fractures in the extra low-permeability sandstone reservoir at the south of western Sichuan depression. The strikes of fractures are in the S-N, NE-SW, E-W, and NW-SE directions respectively. At the end of Triassic, under the horizontal compression tectonic stress field, for which the maximum principal stress direction was NW.SE, the fractures were well developed near the S-N faults and at the end of NE-SW faults, because of their stress concentration. At the end of Cretaceous, in the horizontal compression stress fields of the NE-SW direction, the stress was obviously lower near the NE-SW faults, thus, fractures mainly developed near the S-N faults. At the end of Neogene-Early Pleistocene, under the horizontal compression tectonic stress fields of E-W direction, stress concentrated near the NE-SW faults and fractures developed at these places, especially at the end of the NE-SE faults, the cross positions of NE-SW, and S-N faults. Therefore, fractures developed mostly near S-N faults and NE-SW faults. At the cross positions of the above two sets of faults, the degree of development of the fractures was the highest. Under the modern stress field of the NW-SE direction, the NW-SE fractures were mainly the seepage ones with tensional state, the best connectivity, the widest aperture, the highest permeability, and the minimum opening pressure.

Evolution characteristics of Quaternary tectonic stress field in the north and east margin of Qinghai-Xizang plateau

By inversion of fault slip data for Quaternary tectonic stress field and the analysis of crustal deformation after lateTeriary. we explaincd the evolution of crustal dynamic about the north and east margin of Qinghai-Xizang (Tibet)plateau since Miocenc. From middle or late Miocene to early Pleistocene, the tectonic stress field was featured by amaximum principal compression which was coming from the collision of india Plate continued to the boundaryof the plateau. and was basically of reverse faulting type. Since the late period of early Pleistocene, Pleistocene continuedto push northward and the compressional deformation of the plateau interior increased continuously, meanwhile,N W-SE extension appeared on the east side of the plateau. This formed a favorable condition for the interior block offoe plateau to slide towards east and southeast, causing the faults surrounding the plateau to change from thrust tostrike-slip. -The contemporary tectonic stress field was formed from the late period of early Pleistocene and continuedto present. The direction of maximum principal compressional stress rotated clockwise with respect to the previoustectonic stress held. the stress field was mainly of strike-slip type.

Three dimensional tectonic stress field in North China

According to the latest data of geological structure, geophysics, in-situ stress measurement and focal mechanism,3-D tectonic stress field model in North China is built and 3-D tectonic stress field pattern of North China aresimulated by finite element method. Then the overall characteristics and regional specific feature of North Chinaare studied. Finally, the influences of the valid dynamic boundary conditions of North China Block, active faultsand the inhomogeneity of crustal medium on tectonic stress field of North China are investigated.

End Late Paleozoic tectonic stress field in the southern edge of Junggar Basin

This paper presents the end Late Paleozoic tectonic stress field in the southern edge of Junggar Basin by interpreting stress-response structures （dykes, folds, faults with slickenside and conjugate joints）. The direction of the maximum principal stress axes is interpreted to be NW-SE （about 325°）, and the accommodated motion among plates is assigned as the driving force of this tectonic stress field. The average value of the stress index Rt is about 2.09, which indicates a variation from strike-slip to compressive tectonic stress regime in the study area during the end Late Paleozoic period. The reconstruction of the tectonic field in the southern edge of Junggar Basin provides insights into the tectonic deformation processes around the southern Junggar Basin and contributes to the further understanding of basin evolution and tectonic settings during the culmination of the Paleo- zoic.

Modern tectonic stress field in the Chinese mainland inverted from focal mechanism solutions

The inversion of modern tectonic stress field in China is made by regions on the basis of focal mechanism data inthe period of 1920-1996. Results of the inversion show that the maximum principal compressive stress σ1 axisstrikes nearly north-south direction in the Tibet Plateau and western Chin4 east-west direction in North China Incentral China, its strikes show a radiate pattern, i.e., north-north east in north part, east-west in central part andnorth-north west in south part. The σ1 axes are often perpendicular to the minimum principal stress σ3 axes, exceptwestern China where the σ1 axes are oblique to the σ3 axes with an acute angle. R is defined by (σ2-σ1)/(σ3-σ1),has the higher values (0.60-0.90) in north part of central China and quickly changes into the lower values(0. 10-0.30) in the Tibet Plateau. Both of the observed and inverted fault planes have strikes varying with locations.Combining stress directions and R value, the stress configuration is divided into 7 groups. Most of the groups showstrike-slip faulting with intermediate R values, which occupies North China and the eastern part of China as well asinner Tibet Plateau. A few of them show reverse faulting with higher R values within western pod of China and thenorth edge of the Tibet Plateau. Normal faulting occurred on the south edge of the Tibet Plateau with smaller Rval nes.

The seismicity and tectonic stress field characteristics of the Longmenshan fault zone before the Wenchuan M_S8.0 earthquake

The seismicity of Longrnenshan fault zone and its vicinities before the 12 May 2008 Wenchuan Ms8.0 earthquake is studied. Based on the digital seismic waveform data observed from regional seismic networks and mobile stations, the focal mechanism solutions are determined. Our analysis results show that the seismicities of Longmenshan fault zone before the 12 May 2008 Wenchuan earthquake were in stable state. No obvious phenomena of seismic activity intensifying appeared. According to focal mechanism solutions of some small earthquakes before the 12 May 2008 Wenchuan earthquake, the direction of principal compressive stress P-axis is WNW-ESE. The two hypocenter fault planes are NE-striking and NW-striking. The plane of NE direction is among N50°-70°E, the dip angles of fault planes are 60°-70° and it is very steep. The faultings of most earthquakes are dominantly characterized by dip-slip reverse and small part of faultings present strike-slip. The azimuths of principal compressive stress, the strikes of source fault planes and the dislocation types calculated from some small earthquakes before the 12 May 2008 Wenchuan earthquake are in accordance with that of the main shock. The average stress field of micro-rupture along the Longmenshan fault zone before the great earthquake is also consistent with that calculated from main shock. Zipingpu dam is located in the east side 20 km from the initial rupture area of the 12 May 2008 Wenchuan earthquake. The activity increment of small earthquakes in the Zipingpu dam is in the period of water discharging. The source parameter results of the small earthquakes which occurred near the initial rupture area of the 12 May 2008 Wenchuan earthquake indicate that the focal depths are 5 to 14 km and the source parameters are identical with that of earthquake.

Modern tectonic stress field in Southwest Yunnan, China

By means of inversion of fault slip data, the parameters of 20 tectonic stress tensors in Southwest Yunnan region are determined. Compared with the average stress field of the region obtained from focal mechanism solutions, the following characteristics of modern tectonic stress field in this region are obtained. From the west of Zhenyuan-Yingpanshan fault to the south of Longling fault zone, the maximum compressional stress is in NNE direction and the stress regime is mainly of strike-slip type. In Longling fault zone and the area north to it, the direction of maximum compressional stress is near-NS or NNW, the stress regime is of strike-slip type.

Numerical calculations of tectonic stress field of Chinese mainland and its neighboring regions and their applications to explanation of seismic activity

This paper made a numerical simulation to the basic tectonic stress field of Chinese mainland and its neighboringregion using the visco-elasticity finite element model and the new published displacement rate result. Main contents include the simulation of maximum shear stress and its varying rate, the maximum shear strain and its varyingrate, the shear strain energy density and its varying rate. In view of the high inhomogeneous distribution characterof seismicity in space and time in Chinese mainland and its neighboring area, the normalized background energyvalue was given by means of normalized treatment to the earthquake energy release in the eastern and westernparts of Chinese mainland. And the comparison of the simulation result with the actual seismicity was made. Thefesults show that the simulation values can explain well the earthquake distribution character of Chinese mainlandand its neighboring area.

Numerical modeling of tectonic stress field and fault activity in North China

On the basis of a 3-dimension visco-elastic finite element model of lithosphere in North China, we numerically simulate the recent mutative figures of tectonic stress field. Annual change characteristics of stress field are： 1 ） Maximum principal tensile stress is about 3 -9 kPaa-1 and its azimuth lie in NNW-SSE. 2） Maximum principal compressive stress is about 1 - 6 kPaa-1 and its azimuth lie in NEE-SWW. 3 ） Maximum principal tensile stress is higher both in the west region and Liaoning Province. 4） Variation of tectonic stress field benefits fault movement in the west part and northeast part of North China. 5 ）Annual accumulative rates of Coulomb fracture stress in Tanlu fault belt have segmentation patterns： Jiashan-Guangji segment is the high- est （6 kPaa - 1 ） , Anshan-Liaodongwan segment is the second （5 kPaa - l ） , and others are relatively lower （ 3 - 4 kPaa-1 ）.

Effect of an electrostatic field on gas adsorption and diffusion in tectonic coal

The characteristics of adsorption, desorption, and diffusion of gas in tectonic coal are important for the prediction of coal and gas outbursts. Three types of coal samples, of which both metamorphic grade and degree of damage is different, were selected from Tongchun, Qilin, and Pingdingshan mines. Using a series of experiments in an electrostatic field, we analyzed the characteristics of gas adsorption and diffusion in tectonic coal. We found that gas adsorption in coal conforms to the Langmuir equation in an electrostatic field. Both the depth of the adsorption potential well and the coal molecular electroneg- ativity increases under the action of an electrostatic field. A Joule heating effect was caused by changing the coal-gas system conductivity in an electrostatic field. The quantity of gas adsorbed and AP result from competition between the depth of the adsorption potential well, the coal molecular electronegativ- ity, and the Joule heating effect. △P peaks when the three factors control behavior equally. Compared with anthracite, the impact of the electrostatic field on the gas diffusion capacity of middle and high rank coals is greater. Compared with the original coal, the gas adsorption quantity,△P, and the gas diffusion capacity of tectonic coal are greater in an electrostatic field. In addition, the smaller the particle size of tectonic coal, the larger the△P.

Modern tectonic stress field deeply in Xuzhou Coal Mine

By inverting fault slip data, the parameters of 12 tectonic stress tensors in the mine region can be determined. The following characteristics can be obtained for recent tectonic stress fields, which are found deep in the study region. The results show that the recent tectonic stress field mainly presents the characteristics of near NWW-SSE maximum compressional stress and near NE-SW minimum extensional stress, while the stress regimes are mainly of strike slip, part of the reverse-fault type. Recent tectonic stress field in the region is characterized by horizontal components. The maximum principal compression stress direction was from NEE to SEE, the average principal compression stress direction was near NWW-SSE maximum compres- sional stress and near NE-SW minimum extensional. The recent tectonic stress field of the studied area can be controlled by a large tectonic stress area.

Ambient tectonic shear stress field in Southern California and seismic hazard regions

ccording to the fracture mechanics rupture model of earthquakes put forward by us, several equations to compute tectonic ambient shear stress value τ0 have been derived [equations (1), (2), (3), (5)].τ0 values for intermediate and small earthquakes occurred in Chinese mainland and Southern California have been calculated by use of these equations. The results demonstrate that the level and distribution of τ0 are closely related to the location where large earthquakes will occur, i.e. the region with higher level of τ0 will be prone to occur large earthquakes and the region with lower level will usually occur small earthquakes. According to the spatial distribution of τ0 , the seismic hazard regions or the potential earthquake source regions can in some degree be determined. According to the variation of τ0 with time, the large earthquake occurrence time can be roughly estimated. According to the distribution of τ0 in Southern California and variation with time, three high stress level regions are determined, one (Goldfield area) of them is the present seismic hazard region.

The characteristics of tectonic stress field about strike slip earthquake－generating structure in the Chinese mainland

This paper is one of the series papers about the study on strike-slip earthquake-generating structure in the Chinese mainland. In the first part of this paper, based on the large amount of data from large earthquake investigation and the latest results of focal mechanism, the earthquake-generating structure in the Chinese mainland interior and its neighbouring region is discussed. It is concluded that the absolutely predominated earthquake, not only in number, but also in intensity, as well as in distributing area, is strike slip earthquake, and it is further stressed that the study on the strike slip earthquake-generating structure is significant for seismic risk analysis. In the second part, the characteristics of tectonic stress field about strike slip earthquake-generating structure and the compiled distribution outline of strike slip earthquake-generating fault, normal fault, and thrust fault in the Chinese mainland interior and its neighbouring region, in the light of stress characteristics of fault plane solutions, are also discussed.

Research of the Modern Tectonic Stress Field and Seismicity Characteristics on the Northeastern Side of Pamirs

According to the earthquake focal mechanism solutions of 55 moderately strong earthquakes onthe northeastern side of Pamirs,the spatial and temporal distribution of earthquakes ith M_s≥6.0 since this century and the characteristics of hypocenter depth distribution of earthquakeswith M_s≥3.0 since 1980 in this region,the article discusses the relation between regional tee-tonic stress fields and strong earthquake activity.The result shows that the hypocenter disloca-tion is mostly strike-dip,partly dip-slip,and the direction of the principal compressional stressis nearly NS.The distributive characteristics of strong shock activity is obvious,with the gen-eral trend that the west is strong and the east is weak,which can be divided into three imephases,and each with relative principal active region The depth near Pamirs aren reaches200km,shallower obviously when externding to NE,less than or equal to 40km near the Kalpinblock,and the article discusses the result.

Cretaceous-Early Eocene Tectonic Stress Field in China

The Cretaceous-early Eocene tectonic stress field in China was reconstructed using the data of 369 largeand medium-scale flexural folds and 157 joint sets. It was found that the maximum compressive principal stress axis in eastern China dips 32° NE (nearly horizontal), and strikes SW 212°, whereas that in western China dips 15° NE (also nearly horizontal) and trends SW 195°. The estimation of the dip angles of fold limbs and the palaeotectonic stress values indicates that there was a tendency of gradual weakening of tectonism from southwestern to northeastern China in the Cretaceous-early Eocene. At the depth of 2-3 km, the differential stress value changes from 183 MPa in Tibet to 100 MPa in North and East China.The authors consider that the tectonic stress of this period was related to the north-northeastward movement and push of the Indian-Australian plate.